Search NASA⌕ Search

SEARCH · Search NASA

Results for “Understanding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Understanding fluorine-free electrolytes via small-angle X-ray scattering

Fluorine-free electrolytes have attracted great attention because of its low-cost and environmental friendliness. However, so far, little is known about the solution structures of these electrolytes. Here, we compare the solvation phenomenon of sodium tetraphenylborate (NaBPh 4 ) salt dissolved in organic solvents of propylene carbonate (PC), 1,2-dimethoxyethane (DME), acetonitrile (ACN) and tetrahydrofuran (THF). Small-angle X-ray scattering (SAXS) reveals a unique two-peak structural feature in this salt concentrated PC electrolyte, while solutions using other solvents only have one scattering peak. Molecular dynamics (MD) simulations further reveal that there are anion-based clusters in addition to the short-range charge ordering in the concentrated NaBPh4/PC electrolyte. Raman spectroscopy confirms the existence of considerable contact ion pairs (CIPs). Here, this work emphasizes the importance of global and local structural analysis, which will provide valuable clues for understanding the structure performance relationship of electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2021

Modeling Ti–6Al–4V using crystal plasticity, calibrated with multi-scale experiments, to understand the effect of the orientation and morphology of the α and β phases on time dependent cyclic loading

Classically, crystal plasticity modeling has used a range of constitutive equations, in which the incorporation of additional physics-based relationships typically results in additional model parameters. These additional parameters need to be reliably calibrated, which often necessitates the use of a range of experimental data acquired at multiple length scales. In this work, a crystal plasticity based finite element (CPFE) model for a dual-phase Titanium alloy, Ti–6Al–4V, is developed. The α and β phases of the microstructure are explicitly modeled. The model is calibrated using a systematic optimization routine and experimental data that consist of macroscopic stress-strain curves coupled with lattice strains on different crystallographic planes for the two phases. These experimental data were obtained from in situ high energy X-ray diffraction experiments for multiple material pedigrees, with varying crystallographic orientation distribution and β volume fractions. Depending on the thermomechanical-processing route and the heat treatment used to manufacture the alloy, Ti–6Al–4V can exist in a wide number of microstructural forms, which often results in the α and β phases either having well aligned slip systems (following the Burgers orientation relationship (BOR)) or possessing no alignment of the slip systems across the interphase boundary (not following the BOR). In this study, the fully-calibrated CPFE model is used to gain a comprehensive understanding of the deformation behavior of Ti–6Al–4V, specifically, the effect of microstructures that follow the BOR (or not) on time-dependent cyclic loading (including the effects of dwell hold times).

36 MATERIALS SCIENCE↗
DOE OSTI2024

A multiscale model to understand the interface chemistry, contacts, and dynamics during lithium stripping

A reversible Li-metal electrode, paired with a solid electrolyte, is critical for attaining higher energy density and safer batteries beyond the current lithium-ion cells. A stable stripping process may be even harder to attain as the stripping process will remove Li-atoms from the surface, and naturally reduce surface contact area, if not self-corrected by other mechanisms, such as diffusion and plastic deformation under an applied external stack pressure. Here, we capture these mechanisms occurring at multiple length- and time- scales, i.e., interface interactions, vacancy hopping, and plastic deformation, by integrating density functional theory (DFT) simulations, kinetic Monte Carlo (KMC), and continuum finite element method (FEM). By assuming the self-affine nature of multiscale contacts, we predict the steady-state contact area as a function of stripping current density, interface wettability, and stack pressure. We further estimate the exponential increase of overpotential due to contact area loss to maintain the same stripping current density. We demonstrate that a lithiophilic interface requires less stack pressure to reach the same steady-state contact area fraction than a lithiophobic interface. A “tolerable steady-state” contact area loss for maintaining stable stripping is estimated at 20 %, corresponding to a 10 % increase in overpotential. To constrain contact loss within the tolerance, the required stack pressure is 0.1, 0.5, and 2 times the yield strength of lithium metal for three distinct interfaces, lithiophilic Li/lithium oxide(Li2O), Li/lithium lanthanum zirconium oxide(LLZO), and lithiophoblic Li/lithium fluoride(LiF), respectively. The modeling results agree with experiments on the impact of the stack pressure quantitatively, while the discrepancy in stripping rate sensitivity is attributed to the simplifying interface interaction in our simulations. Overall, this multiscale simulation framework demonstrates the importance of electrochemical-mechanical coupling in understanding the dynamics of the Li/SE interface during stripping.

Feng, Min↗
DOE OSTI2026

Understanding failure in austenitic steels: Key considerations for molten salt storage in CSP applications

Owing to their excellent properties, austenitic stainless steels are extensively used in boilers, furnaces, molten salt tanks, and other applications that are subjected to extreme mechanical loads and high-temperature conditions. Their high corrosion and creep resistance make them suitable for high-temperature operating environments. Additionally, good fatigue resistance and favorable mechanical and visual properties are essential. However, the premature failure of several components at elevated temperatures has been previously reported. Although the failure analysis of components in service is complex, processes such as cold work and welding have been identified as contributing factors to the performance degradation of these steels. This study aims to analyze the various documented failure modes and mechanisms in austenitic steels, including creep, cracking, stress relaxation cracking, and fatigue, to better understand the multi-objective design requirements for these alloys as structural materials for high-temperature molten salt tanks in Concentrating Solar Power (CSP) plants. Stabilized austenitic grades, such as AISI 347H, demonstrate superior resistance to creep and corrosion-related degradation when compared to non-stabilized grades like AISI 316L at temperatures relevant to concentrated solar power (CSP) applications. In contrast, nickel-based alloys offer enhanced corrosion resistance, albeit at a higher cost. This review underscores that creep, stress relaxation cracking, and thermo-mechanical fatigue are the predominant long-term failure risks in CSP hot tanks.

14 SOLAR ENERGY↗
DOE OSTI2017

Understanding the reaction of nuclear graphite with molecular oxygen: Kinetics, transport, and structural evolution

A thorough understanding of oxidation is important when considering the health and integrity of graphite components in graphite reactors. For the next generation of graphite reactors, HTGRs specifically, an unlikely air ingress has been deemed significant enough to have made its way into the licensing applications of many international licensing bodies. While a substantial body of literature exists on nuclear graphite oxidation in the presence of molecular oxygen and significant efforts have been made to characterize oxidation kinetics of various grades, the value of existing information is somewhat limited. Often, multiple competing processes, including reaction kinetics, mass transfer, and microstructural evolution, are lumped together into a single rate expression that limits the ability to translate this information to different conditions. This article reviews the reaction of graphite with molecular oxygen in terms of the reaction kinetics, gas transport, and microstructural evolution of graphite. It also presents the foundations of a model for the graphite-molecular oxygen reaction system that is kinetically independent of graphite grade, and is capable of describing both the bulk and local oxidation rates under a wide range of conditions applicable to air-ingress.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

Primary radiation damage: A review of current understanding and models

Scientific understanding of any kind of radiation effects starts from the primary damage, i.e. the defects that are produced right after an initial atomic displacement event initiated by a high-energy particle. In this Review, we consider the extensive experimental and computer simulation studies that have been performed over the past several decades on what the nature of the primary damage is. We review both the production of crystallographic or topological defects in materials as well as radiation mixing, i.e. the process where atoms in perfect crystallographic positions exchange positions with other ones in non-defective positions. All classes of materials except biological materials are considered. We also consider the recent effort to provide alternatives to the current international standard for quantifying this energetic particle damage, the Norgett-Robinson-Torrens displacements per atom (NRT-dpa) model for metals. We present in detail new complementary displacement production estimators (“athermal recombination corrected dpa”, arc-dpa) and atomic mixing (“replacements per atom”, rpa) functions that extend the NRT-dpa, and discuss their advantages and limitations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Molecular Iodine Interactions with Metal Substrates: Towards the Understanding of Iodine Interactions in the Environment Following a Nuclear Accident

In order to evaluate the potential impacts to the public from radioiodine in a nuclear event, it is vital to expand our understanding of the interaction of molecular iodine with various surfaces. There are many potential surfaces that iodine could interact with in and around a nuclear facility, including stainless steel. This study, carried out at ambient temperature, pressure and humidity, demonstrates the highly adsorptive nature of molecular iodine on two types of austenitic stainless steel, 304L and 316L. In the authors review of available literature, Fe is the only metal in stainless steel that is assumed to react with gas-phase molecular iodine. By using a novel approach which combines Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) with surface Energy Dispersive X-ray Spectroscopy (EDS) there is evidence of the formation of metal iodides that have not previously been verified or quantified. Samples exposed to gaseous molecular iodine formed an iodine containing corrosion product visible by scanning electron microcopy (SEM). Evaluation of the metals in the corrosion region using EDS was compared to a water leach of the same samples analyzed using ICP-OES. A comparison of the results provide evidence that the water leachate is representative of the corrosion layer and not the base material. Furthermore, it provides confirmation of metal iodide formation with minor stainless-steel constituents including: FeI2, NiI2, MnI2 and CrI2.

Beck, Chelsie L.↗
DOE OSTI2020

Understanding water management in platinum group metal-free electrodes using neutron imaging

Platinum group metal-free (PGM-free) catalysts are a low-cost alternative to expensive PGM catalysts for polymer electrolyte fuel cells. However, due to the low volumetric activity of PGM-free catalysts, the catalyst layer thickness of the PGM-free catalyst electrode is an order of magnitude higher than PGM based electrodes. The thick PGM-free electrodes suffer from increased transport resistance and poor water management, which ultimately limits the fuel cell performance. This manuscript presents the study of water management in the PGM-free electrodes to understand the transport limitations and improve fuel cell performance. Here, in-operando neutron imaging is performed to estimate the water content in different components across the fuel cell thickness. Water saturation in thick PGM electrodes, with similar catalyst layer thickness to PGM-free electrodes, is lower than in the PGM-free electrodes irrespective of the operating conditions, due to high water retention by PGM-free catalysts. Improvements in fuel cell performance are accomplished by enhancing water removal from the flooded PGM-free electrode in three ways: (i) enhanced water removal with a novel microporous layer with hydrophilic pathways incorporated through hydrophilic additives, (ii) water removal through anode via novel GDL in the anode, and (iii) lower water saturation in PGM-free electrode structures with increased catalyst porosity.

25 ENERGY STORAGE↗
DOE OSTI2021

A simple convertible electrolyzer in membraneless and membrane-based modes for understanding water splitting mechanism

State-of-the-art membrane-based electrolyzers such as proton exchange membrane electrolyzer cells, are costly, susceptible to degradation, and time-consuming for electrode evaluation and triple-phase boundary electrochemical reaction studies. Here, a simple convertible electrolyzer in membraneless and membrane-based modes is proposed. For the first time, this enables comprehensive investigations of water splitting with pure water, acidic and alkaline electrolytes in one cell. With the simple electrolyzer and high-speed visualization system, the influences of flow rate, electrolytes, concentration, and Nafion membrane on the oxygen evolution reactions (OERs), hydrogen evolution reactions (HERs) and electrolyzer performance are comprehensively investigated. Visualization results reveal that water splitting only occurred at the edge between the electrode and the Nafion membrane in pure water. However, they occurred on the whole electrode surface in alkaline and acidic electrolytes, indicating easily tunable reaction sites with the convertible electrolyzer. This demonstrates the feasibility of using the simple convertible electrolyzer for understanding the water splitting mechanism. The relation between electrolyte thickness and resistances with different electrolytes is also quantified. This research provides an insight for optimizing electrochemical devices while delivering an inexpensive and fast way for electrode evaluations and electrochemical reaction studies.

25 ENERGY STORAGE↗
DOE OSTI2024

Understanding ion-selective Li/Na metal plating behavior in hybrid Li-Na battery

This study investigates ion-selective Li/Na metal plating behavior in hybrid Li-Na battery systems, revealing the critical role of electrolyte solvents in these processes. Using a hybrid battery design with a LiFePO 4 cathode, Na metal anode, and NaPF 6 -based electrolytes, we observed contrasting effects of carbonate- and ether-based electrolyte solvents. While ether-based electrolytes showed expected Na plating/stripping, carbonate-based electrolytes surprisingly favored a Li-dominant plating/stripping reaction despite the Na-rich environment. X-ray photoelectron spectroscopy revealed that this selectivity is linked to the composition of the solid electrolyte interphase (SEI) layer, with carbonate electrolytes forming Li-based inorganic-rich SEI layers that facilitate Li-ion diffusion while screening Na ions. In conclusion, these findings challenge the conventional understanding of metal plating in multi-ion environments and offer insights for designing future hybrid battery systems.

25 ENERGY STORAGE↗
DOE OSTI2018

Understanding the formation of nanocomposites consisting of silver sulfide and platinum hollow nanostructures

Highlights: • Reacting core-shell [email protected] particles with Na{sub 2}S leads to hollow Pt nanostructures. • Reacting core-shell [email protected] particles with sulfur leads to Ag{sub 2}S-hPt nanocomposites. • The mechanism determining the formation of Ag{sub 2}S-hPt nanocomposites was elucidated. • Additional experiments were designed to rationalize the formation mechanism. - Abstract: Structural conversion using core-shell silver (Ag)-platinum (Pt) nanoparticles as starting materials is a promising way to produce nanocomposites consisting of silver sulfide (Ag{sub 2}S) and hollow Pt nanostructures (Ag{sub 2}S-hPtNCs). However, the mechanism behind the structural conversion process is yet to be understood. In this study, we use transmission electron microscope (TEM) as a typical tool to characterize the products formed in different structural conversion processes, and interpret the experimental observations by proposing mechanisms behind the reactions between core-shell Ag-Pt nanoparticles and sulfur precursors from different sources. We then design additional experiments to rationalize the formation mechanism we proposed. The mechanistic understanding of the structural conversion from bimetallic core-shell nanostructures to heterogeneous nanocomposites may extend the fabrication of heterogeneous nanocomposites for a given technological application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Structure and magnetism across the Sr 2- x Ba x NiOsO 6 phase diagram: Understanding magnetic superexchange between first and third row transition metal ions

The crystal chemistry and magnetism of compositions in the Sr 2-x Ba x NiOsO 6 phase diagram have been investigated to better understand the superexchange interactions between 3d and 5d transition metal ions. Compositions with x ​< ​1.35 crystallize with the double perovskite structure, while those with x ​> ​1.83 crystallize in a trigonal structure that is a cation ordered variant of the 6H hexagonal perovskite structure. The Sr-rich double perovskites undergo a cubic to tetragonal distortion upon cooling that is driven by out-of-phase octahedral tilting. The tetragonal distortion occurs upon cooling below 650 ​K in Sr 2 NiOsO 6 . The temperature of this transition decreases as the barium content increases and is completely suppressed for x ​≥ ​1.2. All compositions in the double perovskite region become spin glasses below T g ​≈ ​40 ​K, due to the competition between ferromagnetic Ni–Os and antiferromagnetic Ni–Ni and Os–Os superexchange interactions. The double perovskite compositions that are rich in barium, like Sr 0.8 Ba 1.2 NiOsO 6 show some signs of magnetic ordering in small clusters, but the presence of Ba/Sr disorder inhibits long-range magnetic order. Trigonal Ba 2 NiOsO 6 orders ferrimagnetically below T C ​= ​108 ​K. In conclusion, the magnetic structure of this compound contains ferromagnetic ~180° Ni–O–Os interactions and antiferromagnetic ~90° Ni–O–Os interactions, both in agreement with the Goodenough-Kanamori rules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Understanding fission gas bubble distribution, lanthanide transportation, and thermal conductivity degradation in neutron-irradiated α-U using machine learning

U—10Zr based metallic nuclear fuel is the leading candidate for next-generation sodium-cooled fast reactors in the United States. US research reactors have used and tested this fuel type since the 1960s and accumulated considerable experience and knowledge about the fuel performance. Most of the knowledge, however, remains empirical. The lack of mechanistic understanding of fuel performance puts a large burden on proof through experimental verification for the qualification of U—10Zr fuel for commercial use. Further, this paper proposes an image data-driven machine learning approach, coupled with domain knowledge provided by advanced post irradiation examination, to provide unprecedented quantified insights into the morphology, size, density and the connectivity of fission gas bubbles and their effects on the fission product transportation and thermal conductivity. Specifically, we developed a method to automatically detect, extract statistics, and classify ~19,000 fission gas bubbles into different categories, and quantitatively link the data to lanthanide transportation through connected bubbles and degradation of thermal conductivity along the radial temperature gradient in a neutron irradiated U—10Zr annular fuel. Results indicate the approach can be modified to study other irradiation effects, such as secondary phase redistribution and gaseous fuel swelling in other irradiated nuclear fuels.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Understanding process-microstructure-property relationships in laser powder bed fusion of non-spherical Ti-6Al-4V powder

Powder feedstock is a major cost driver in metal additive manufacturing (AM). Replacing the spherical powder with the cost-efficient non-spherical one can reduce the feedstock cost up to 50% and attract more interest to adopt AM in production and new alloy development. Here, for this paper, a comprehensive study was conducted to understand process-microstructure-property relationships in laser powder bed fusion of hydride-dehydride Ti-6Al-4V powder. We demonstrated that variation of laser scan speed had a significant impact on the grain structure, pore evolution and properties compared to laser power. Dynamic X-ray radiography showed that with decreasing scan speed at a constant laser power, a transition from conduction to keyhole mode laser processing occurred, in which a deeper melt pool at lower scan speed intensified texture. In other words, an increase in laser scan speed resulted in formation of the refined prior β grains with shape factor of ~5, lowering the anisotropy. Furthermore, the degree of variant selection was evaluated based on the analyzed texture as a function of laser power and scan speed. With increasing laser scan speed, the dominant α/α boundary type was altered from type 2 to 4 and the degree of variant selection was noticeably decreased. On the other hand, increasing laser power left the morphology of prior β grains, their size, and the dominant α/α boundary (type 4) unchanged, while the texture and anisotropy were intensified, and the degree of variant selection was slightly decreased. Finally, dependency of surface roughness and microhardness were discussed as a function of laser processing parameters.

variant selection↗
DOE OSTI2023

Simulation of two nanoparticle melting to understand the conductivity drop of 3D-printed silver nanowires

The future flexible sensor technology will require low-temperature, fast processing 3D printing techniques that will rely heavily on the quality of nanoparticle (NP) Ink. Electrical conductivity has been found to decrease in majority of the 3D printed electronic wires. Herein we report a fundamental understanding in drop of electrical conductivity in processed silver (Ag) line wire, generally found in Ag-nanoparticle Ink, using large-scale atomistic molecular dynamics (MD) simulations of sintering of five different sizes of Ag NPs. To preserve the high conductivity of pure silver wires, the integrity of the pristine face-centered cubic (FCC) crystalline structure must be retained in the processed line wires. Simulations show that the pristine Ag FCC structures of the nanoparticles are not recovered after melting and resolidification, instead, the resolidified material is paracrystaline. The breakdown of pristine FCC structures might be the cause of the drop in conductivity of processed Ag wires. Simulation results suggest that the intermediate size nanoparticles retain highest percentage of the pristine silver face-centered cubic (FCC) structure after pulse treatments. Our results show that the most promising Ag-Ink should contain smaller to medium size silver NPs that can retain FCC structure after 3D printing of the Ag-Ink.

42 ENGINEERING↗
DOE OSTI2019

Understanding the role of Zn 2+ in surfactant-free layered silicate delamination: Exfoliation of magadiite

Here we investigated the effect of Zn 2+ treatment on the exfoliation of layered silicate magadiite, as a model system, to better understand the role of zinc in surfactant-free zeolite exfoliation. Samples of magadiite and ball-milled magadiite were exfoliated via treatment with aqueous Zn(NO 3 ) 2 solution, and the resulting materials were characterized via powder X-ray diffraction, nitrogen physisorption, high-angle annular dark-field scanning transmission electron microscopy, and infrared spectroscopy. Zn 2+ treatment of magadiite increases its external surface area by 40%, while Zn 2+ treatment of ball-milled magadiite increases its external surface area by 109%. Acid-washing removes Zn(O) x (OH) y colloids and further increases external surface area, leading to a total surface area increase of 150% for magadiite after Zn 2+ treatment and acid-washing, and 182% for ball-milled magadiite after Zn 2+ treatment and acid-washing, by exposing surface area that was not accessible after Zn 2+ treatment due to pore blocking. We propose a mechanism of exfoliation to account for these surface-area increases, which involves the Zn(O) x (OH) y colloids growing and forcing layers apart selectively at the grain boundaries. Ball milling not only makes existing grain boundaries more accessible, but it also creates new grain boundaries, resulting in more efficient exfoliation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Alkene adsorption and cracking on acidic zeolites – A gradual process of understanding

Cracking of light alkenes on solid acids and, in particular on zeolites, is ubiquitous in refineries. Different zeolite framework topologies in the catalysts used provide spatial constraints for reactants and products, leading to discrete reaction routes and varying selectivities. The conversion of alkenes in cracking proceeds either via monomolecular or bimolecular reaction pathways. In both routes, the reacting alkene adsorbs first on Brønsted acid sites forming the initial state (e.g., π-complex, carbenium ion or alkoxide), followed by β-cleavage in the carbenium transition state, generating a smaller alkene and a carbenium ion (monomolecular route) or forming a dimer by alkene addition that cracks subsequently (bimolecular route). The current state of understanding alkene sorption and cracking is critically discussed in this paper and four questions are formulated that may be the central questions from our perspective in further developing new generations of catalysts and processes for alkene conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Understanding the asymmetric orientations and stress states in polycrystalline NiTi SMA by in-situ synchrotron-based high-energy X-ray diffraction

The stress-induced martensite transformations (SIMTs) dramatically affect the recoverable strain and mechanical response of polycrystalline NiTi. An in-depth understanding of the propagation manner and orientation preference of SIMTs is therefore crucial. Here, in this work, we present a unique asymmetric anisotropy of SIMTs and lattice strains induced by Lüders-type deformation in polycrystalline NiTi, achieved through a combination of in-situ synchrotron X-ray diffraction and uniaxial tensile loading and unloading experiments. Our experimental findings reveal that in polycrystalline NiTi under uniaxial deformation, the asymmetry of SIMTs is attributed to the inhomogeneous strain field caused by the Lüders-type mechanism. The asymmetrical SIMT starts with the forward Lüder band and disappears along with the backward Lüder band. The austenite with the favored orientation of $\langle$110$\rangle$ A //loading direction (LD) transformed and recovered back at a higher rate compared to other orientations during both loading and unloading.

36 MATERIALS SCIENCE↗