Search NASA⌕ Search

SEARCH · Search NASA

Results for “Vertical temperature structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Observations of Antarctic Polar Stratospheric Clouds by Geoscience Laser Altimeter System (GLAS)

Polar Stratospheric Clouds (PSCs) frequently occur in the polar regions during winter and are important because they play a role in the destruction of stratospheric ozone. During late September and early October 2003, GLAS frequently observed PSCs over western Antarctica. At the peak of this activity on September 29 and 30 we investigate the vertical structure and extent, horizontal coverage and backscatter characteristics of the PSCs using the GLAS data. The PSCs were found to cover an area approximately 10 to 15 % of the size of Antarctica in a region where enhanced PSC frequency has been noted by previous PSC climatology studies. The area of PSC formation was found to coincide with the coldest temperatures in the lower stratosphere. In addition, extensive cloudiness was seen within the troposphere below the PSCs indicating that tropospheric disturbances might have played a role in their formation.

Palm, Stephen P.↗

The Response of Lower Atmospheric Ozone to ENSO in Aura Measurements and a Chemistry-Climate Simulation

The El Nino-Southern Oscillation (ENSO) is the dominant mode of tropical variability on interannual time scales. ENSO appears to extend its influence into the chemical composition of the tropical troposphere. Recent work has revealed an ENSO-induced wave-1 anomaly in observed tropical tropospheric column ozone. This results in a dipole over the western and eastern tropical Pacific, whereby differencing the two regions produces an ozone anomaly with an extremely high correlation to the Nino 3.4 Index. We have successfully reproduced this feature using the Goddard Earth Observing System Version 5 (GEOS-5) general circulation model coupled to a comprehensive stratospheric and tropospheric chemical mechanism forced with observed sea surface temperatures over the past 25 years. An examination of the modeled ozone field reveals the vertical contributions of tropospheric ozone to the column over the western and eastern Pacific region. We will show composition sensitivity in observations from NASA s Aura satellite Microwave Limb Sounder (MLS) and the Tropospheric Emissions Spectrometer (TES) and a simulation to provide insight into the vertical structure of these ENSO-induced ozone changes. The ozone changes due to the Quasi-Biennial Oscillation (QBO) in the extra-polar upper troposphere and lower stratosphere in MLS measurements will also be discussed.

Oman, L. D.↗

One pass core design of a super fast reactor

One pass core design for Supercritical-pressure light water-cooled fast reactor (Super FR) is proposed. The whole core is cooled with upward flow in one through flow pattern like PWR. Compared with the previous two pass core design; this new flow pattern can significantly simplify the core concept. Upper core structure, coolant flow scheme as well as refueling procedure are as simple as in PWR. In one pass core design, supercritical-pressure water is at approximately 25.0 MPa and enters the core at 280 C. degrees and is heated up in one through flow pattern upwardly to the average outlet temperature of 500 C. degrees. Great density change in vertical direction can cause significant axial power offset during the cycle. Meanwhile, Pu accumulated in the UO{sub 2} fuel blanket assemblies also introduces great power increase during cycle, which requires large amount of flow for heat removal and makes the outlet temperature of blanket low at the beginning of equilibrium cycle (BOEC). To deal with these issues, some MOX fuel is applied in the bottom region of the blanket assembly. This can help to mitigate the power change in blanket due to Pu accumulation and to increase the outlet temperature of the blanket during cycle. Neutron transport and thermohydraulics coupled calculation shows that this design can satisfy the requirement in the Super FR principle for both 500 C. degrees outlet temperature and negative coolant void reactivity. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Room-temperature-operation visible-emission semiconductor diode lasers

There were two main approaches taken to develop shorter wavelength lasers. (1) Based on (AlGa)As and liquid-phase epitaxy, significant new results were obtained: Properties of these laser diodes (power output, spectra, and beam patterns), materials considerations, laser theory, and growth problems are discussed. The design of (AlGa)As layers is discussed from the vertical point of view, and various design curves are given. Horizontal structural requirements are also discussed. Experimental results from measurements done as a function of hydrostatic pressure are correlated with other results. (2) The first heterojunction laser structures using GaAs sub l-x P sub x and In sub y Ga sub l-y P at compositions, where the lattice constants are matched, were grown using vapor-phase growth technology and are described in detail, including experimental device results. Threshold current densities from 3,000 to 5,000 A per sq cm. and emission wavelengths from 6,520 A to 6,640 A were obtained at 77 K. The limiting factor in these devices is nonradiative recombination at the heterojunctions. Life tests on facet-coated (AlGa)As CW diodes are reported.

Ladany, I.↗

Synthesis, crystal structure, spectroscopic and thermal properties of [Et{sub 4}N][Ta{sub 6}Br{sub 12}(H{sub 2}O){sub 6}]Br{sub 4}.4H{sub 2}O (Et=ethyl)-A new compound with the paramagnetic [Ta{sub 6}Br{sub 12}]{sup 3+} cluster core

A new hexanuclear cluster compound, [Et{sub 4}N][Ta{sub 6}Br{sub 12}(H{sub 2}O){sub 6}]Br{sub 4}.4H{sub 2}O (Et=ethyl) (1), with the paramagnetic [Ta{sub 6}Br{sub 12}]{sup 3+} cluster entity, was synthesized and characterized by elemental and TG/DTA analyses, IR and UV/Vis spectroscopy and by a single-crystal X-ray diffraction study. The presence of the paramagnetic [Ta{sub 6}Br{sub 12}]{sup 3+} unit was confirmed also by the room-temperature magnetic and EPR measurements. The compound crystallizes in the tetragonal I4{sub 1}/a space group, with a=14.299(5), c=21.241(5) A, Z=4, R{sub 1}(F)/wR{sub 2}(F{sup 2})=0.0296/0.0811. The structure contains discrete [Ta{sub 6}Br{sub 12}(H{sub 2}O){sub 6}]{sup 3+} cations with an octahedron of metal atoms edge-bridged by bromine atoms and with water molecules occupying all six terminal positions. The cluster units are positioned in the vertices of the three-dimensional (pseudo)diamond lattice. The structure shows similarities with literature reported structures of cluster compounds crystallizing in the diamond (Fd3-barm) space group. - Graphical abstract: Two interpenetrating (pseudo)diamond nets formed by packing of the paramagnetic [Ta{sub 6}Br{sub 12}(H{sub 2}O)]{sup 3+} (octahedral) and diamagnetic [Et{sub 4}N]{sup +} (spheres) cations.

36 MATERIALS SCIENCE↗

Seismic Fracture Characterization Methodologies for Enhanced Geothermal Systems

Executive Summary The overall objective of this work was the development of surface and borehole seismic methodologies using both compressional and shear waves for characterizing faults and fractures in Enhanced Geothermal Systems. We used both surface seismic and vertical seismic profile (VSP) methods. We adapted these methods to the unique conditions encountered in Enhanced Geothermal Systems (EGS) creation. These conditions include geological environments with volcanic cover, highly altered rocks, severe structure, extreme near surface velocity contrasts and lack of distinct velocity contrasts at depth. One of the objectives was the development of methods for identifying more appropriate seismic acquisition parameters for overcoming problems associated with these geological factors. Because temperatures up to 300º C are often encountered in these systems, another objective was the testing of VSP borehole tools capable of operating at depths in excess of 1,000 m and at temperatures in excess of 200º C. A final objective was the development of new processing and interpretation techniques based on scattering and time-frequency analysis, as well as the application of modern seismic migration imaging algorithms to seismic data acquired over geothermal areas. The use of surface seismic reflection data at Brady's Hot Springs was found useful in building a geological model, but only when combined with other extensive geological and geophysical data. The use of fine source and geophone spacing was critical in producing useful images. The surface seismic reflection data gave no information about the internal structure (extent, thickness and filling) of faults and fractures, and modeling suggests that they are unlikely to do so. Time-frequency analysis was applied to these data, but was not found to be significantly useful in their interpretation. Modeling does indicate that VSP and other seismic methods with sensors located at depth in wells will be the most effective seismic tools for getting information on the internal structure of faults and fractures in support of fluid flow pathway management and EGS treatment. Scattered events similar to those expected from faults and fractures are seen in the VSP reported here. Unfortunately, the source offset and well depth coverage do not allow for detailed analysis of these events. This limited coverage also precluded the use of advanced migration and imaging algorithms. More extensive acquisition is needed to support fault and fracture characterization in the geothermal reservoir at Brady's Hot Springs. The VSP was effective in generating interval velocity estimates over the depths covered by the array. Upgoing reflection events are also visible in the VSP results at locations corresponding to reflection events in the surface seismic. Overall, the high temperature rated fiber optic sensors used in the VSP produced useful results. Modeling has been found useful in the interpretation of both surface reflection seismic and VSP data. It has helped identify possible near surface scattering in the surface seismic data. It has highlighted potential scattering events from deeper faults in the VSP data. Inclusion of more detailed fault and fracture specific stiffness parameters are needed to fully interpret fault and fracture scattered events for flow properties (Pyrak-Nolte and Morris, 2000, Zhu and Snieder, 2002). Shear wave methods were applied in both the surface seismic reflection and VSP work. They were not found to be effective in the Brady's Hot Springs area. This was due to the extreme attenuation of shear waves in the near surface at Brady's. This does not imply that they will be ineffective in general. In geothermal areas where good shear waves can be recorded, modeling suggests they should be very useful for characterizing faults and fractures.

15 GEOTHERMAL ENERGY↗

Changing Characteristics of Tropical Extreme Precipitation–Cloud Regimes in Warmer Climates

In this study, we investigated the changing characteristics of climatic scale (monthly) tropical extreme precipitation in warming climates using the Energy Exascale Earth System Model (E3SM). The results are from Atmospheric Model Intercomparison Project (AMIP)-type simulations driven by (a) a control experiment with the present-day sea surface temperature (SST) and CO 2 concentration, (b) P4K, the same as in (a) but with a uniform increase of 4K in the SST globally, and (c) the same as in (a), but with an imposed SST and CO 2 concentration from the outputs of the coupled E3SM forced by a 4xCO 2 concentration. We found that as the surface warmed under P4K and 4xCO 2 , both convective and stratiform rain increased. Importantly, there was an increasing fractional contribution of stratiform rain as a function of the precipitation intensity, with the most extreme but rare events occurring preferentially over land more than the ocean, and more so under 4xCO 2 than P4K. Extreme precipitation was facilitated by increased precipitation efficiency, reflecting accelerated rates of recycling of precipitation cloud water (both liquid and ice phases) in regions with colder anvil cloud tops. Changes in the vertical profiles of clouds, condensation heating, and vertical motions indicate increasing precipitation–cloud–circulation organization from the control and P4K to 4xCO 2 . The results suggest that large-scale ocean warming, that is, P4K, was the primary cause contributing to an organization structure resembling the well-known mesoscale convective system (MCS), with increased extreme precipitation on shorter (hourly to daily) time scales. Additional 4xCO 2 atmospheric radiative heating and dynamically consistent anomalous SST further amplified the MCS organization under P4K. Analyses of the surface moist static energy distribution show that increases in the surface moisture (temperature) under P4K and 4xCO 2 was the key driver leading to enhanced convective instability over tropical ocean (land). However, a fast and large increase in the land surface temperature and lack of available local moisture resulted in a strong reduction in the land surface relative humidity, reflecting severe drying and enhanced convective inhibition (CIN). It is argued that very extreme and rare “record-breaking” precipitation events found over land under P4K, and more so under 4xCO 2 , are likely due to the delayed onset of deep convection, that is, the longer the suppression of deep convection by CIN, the more severe the extreme precipitation when it eventually occurs, due to the release of a large amount of stored surplus convective available potential energy in the lower troposphere during prolonged CIN.

54 ENVIRONMENTAL SCIENCES↗

Inorganic Halide Perovskitoid TlPbI 3 for Ionizing Radiation Detection

Room temperature semiconductor detector (RTSD) materials for γ-ray and X-ray radiation are in great demand for the nonproliferation of nuclear materials as well as for biomedical imaging applications. Halide perovskites have attracted great attention as emerging and promising RTSD materials. In this contribution, the material synthesis, purification, crystal growth, crystal structure, photoluminescence properties, ionizing radiation detection performance, and electronic structure of the inorganic halide perovskitoid compound TlPbI 3 are reported on. This compound crystallizes in the ABX 3 non-perovskite crystal structure with a high density of d = 6.488 g·cm –3 , has a wide bandgap of 2.25 eV, and melts congruently at a low temperature of 360 °C without phase transitions, which allows for facile growth of high quality crystals with few thermally-activated defects. High-quality TlPbI 3 single crystals of centimeter-size are grown using the vertical Bridgman method using purified raw materials. A high electrical resistivity of ≈10 12 Ω·cm is readily obtainable, and detectors made of TlPbI 3 single crystals are highly photoresponsive to Ag K α X-rays (22.4 keV), and detects 122 keV γ-rays from 57 Co radiation source. The electron mobility-lifetime product µ e τ e was estimated at 1.8 × 10 –5 cm 2 ·V –1 . A high relative static dielectric constant of 35.0 indicates strong capability in screening carrier scattering and charged defects in TlPbI 3 .

36 MATERIALS SCIENCE↗

Layer-by-Layer-Processed Organic Solar Cells with 18.02% Efficiency Enabled by Regulating the Aggregation of Bottom Polymers

The fabrication of organic solar cells (OSCs) by a layer-by-layer (LBL) method has attracted growing attention in recent years. As already known, the pre-aggregates of conjugated polymers in solution have a profound impact on their microstructure morphology in films. Herein, by simply controlling the solution temperature and annealing processes, the pre-aggregation behavior of D18 polymer in solution can be fine-tuned and the microstructure of D18 bottom layer is well manipulated. The optimized D18 bottom layer can effectively regulate L8-BO upper-layer-forming suitable networks for efficient charge transportation. In addition, a vertical phase separation with a special D/D:A/A structure (P-i-N-type component distribution) is also formed. As a result, compared to the 16.43% power conversion efficiency (PCE) of the bulk heterojunction devices, such control enables bilayer OSC devices based on the polymer D18 and L8-BO to deliver an enhanced PCE of 18.02% with simultaneously improved short-circuit current density, open-circuit voltage, and fill factor. Importantly, it is also demonstrated in these results that the LBL deposition process utilizing the pre-aggregation of polymer and its fiber-network-forming ability is a very promising approach to improve charge dynamics, suppress carrier recombination, and fabricate highly efficient OSCs.

14 SOLAR ENERGY↗

A Study of Intermittent Turbulence in Stable Arctic Boundary Layers

Abstract Polar boundary layers are difficult to model due to the existence of intermittent turbulence within stable layers. Here we present a case study evaluation of coherent structures in a stable boundary layer observed during a series of flights with an uncrewed aircraft system (DataHawk2) on 19 October 2016 at Oliktok Point, Alaska as part of the ERASMUS (Evaluation of Routine Atmospheric Sounding Measurements using Unmanned Systems) field campaign. During a sequence of five flights over a nine-hour period, 57 profiles of atmospheric properties (0–400 m a.g.l) were collected. Turbulence was identified using derived Richardson Number, temperature structure function parameter, and turbulence kinetic energy dissipation. Throughout all flights on this strongly stable day, intermittent turbulence was observed. These turbulent layers showed well-mixed potential temperature profiles embedded within otherwise stable potential temperature profiles; often resulting in a characteristic staircase pattern. Turbulent layers ranged from 1 to 30 m deep, with most individual layers being 1–2 m deep. Vertical propagation velocities of layers in the lower atmosphere were on the order of a few cm s −1 , typical of non-convective environments. In different regions of the profile, turbulence was driven by a different balance of buoyancy and shear forces, with turbulence in the near surface environment driven by strong shear forces overcoming strong resistance to buoyancy, while turbulence in elevated layers characterized by weaker shear forces overcoming weaker resistance to buoyancy. We discuss the potential of such datasets for improving subgrid parameterizations of small-scale turbulence embedded within stable boundary layers.

54 ENVIRONMENTAL SCIENCES↗

Three influential factors on colloidal nanoparticle deposition for heat conduction enhancement in 3D chip stacks

Thermal management is one of the major challenges facing the development of three-dimensional (3D) chip stacks. Recently, experimental studies have shown that neck-based thermal structure (NTS) between chip layers formed by drying of colloidal suspension in cavity filled with micro-size particles can improve the vertical heat conduction threefold. However, a deep understanding of the mechanisms of neck formation and its influence on heat conduction is still lacking. In this paper, we numerically study the effects of three parameters, i.e., initial nanoparticle concentration, drying temperature and chip surface wettability on neck formation between filler particles and on the resulting heat conduction of the NTS. With increasing nanoparticle concentration, the size and number of necks increase, resulting in an increased effective thermal conductivity (ETC) of NTS. The drying temperature is found to have only little influence on the ETC of resultant NTS, while the neck size and spatial distribution become more uniform at higher drying temperature. When reducing the wettability of the top and bottom surfaces of the cavity, the necks shrink in size until completing evacuating at the top and bottom layers, while the size of the necks between filler particles in the middle height of the cavity expands slowly. In consequence, the ETC of NTS drops at an increasing rate. Being able to reveal the underlying multiple mechanisms of two-phase flow, phase change and heat transport, the current numerical study suggests optimal values for the deposition process, with initial nanoparticle concentration over 0.8%, a drying temperature of 60°C and a uniform contact angle of 30° for practical production of NTS.

3D chip stacks↗

Moist convection and the vertical structure and water abundance of Jupiter's atmosphere

The cumulative effects of an ensemble of moist convective plumes on a conditionally unstable atmosphere are predicted by a model of moist convection on Jupiter in which the heating/cooling and drying/moistening of the environment occur through (1) compensating subsidence, (2) detrainment of updraft air at cloud tops, and (3) the evaporation and melting of falling condensate. Parahydrogen is transported as a passive tracer. Pure moist convective, mixed moist-dry convective, and primarily dry convective regimes are possible, depending on the assumed deep-water abundance, efficiency of condensate evaporation, and initial temperature profile.

Del Genio, Anthony D.↗

An Investigation of Current and Future Data Systems in Numerical Meteorology

The Advanced Microwave Sounding Unit (AMSU) and the Microwave Humidity Sounder (MHS) constitute the advanced microwave sounding system to be flown on the EOS-PM platform. Similar instruments (the AMSU-A corresponding to the AMSU and the AMSU-B corresponding to the MHS) are scheduled to become operational on the NOAA polar orbiting satellites beginning with NOAA-K. The unique characteristics of the AMSU-MHS instruments, as compared to the capabilities of their infrared and microwave predecessors, introduce new opportunities, and challenges, for operational retrievals of atmospheric structure. Not only will these new data improve present capabilities for the retrieval of atmospheric profiles of temperature and moisture, but they will provide the only opportunity for successfully retrieving atmospheric temperature and humidity profiles in the presence of modest amounts of cloud and precipitation. A complementary opportunity is presented by the potential of the AMSU-MHS to obtain information about the structure of clouds and precipitation. The data sets obtained will contribute to the current knowledge of global water and energy budgets, and provide critical information on the horizontal and vertical distribution of tropospheric water vapor, the spatial and temporal distribution of rain, and the relationship of cloud formation and dissipation to atmospheric dynamics and thermodynamics.

Diak, George R.↗

Cloud Structure Anomalies Over the Tropical Pacific During the 1997/98 El Nino

Satellite measurements of both cloud vertical structure and cloud-radiative forcing have been used to show that during the strong 1997/98 El Nino there was a substantial change in cloud vertical structure over the tropical Pacific Ocean. Relative to normal years, cloud altitudes were lower in the western portion of the Pacific and higher in the eastern portion. The reason for these redistributions was a collapse of the Walker circulation and enhanced large-scale upward motion over the eastern Pacific, both caused by the lack of a zonal sea surface temperature gradient during El Nino. It is proposed that these cloud structure changes, which significantly impact satellite measurements of the tropical Pacific's radiation budget, would serve as one useful means of testing cloud-climate interactions in climate models.

Cess, Robert D.↗

Highly Asymmetric Graphene Layer Doping and Band Structure Manipulation in Rare Earth–Graphene Heterostructure by Targeted Bonding of the Intercalated Gadolinium

Heterostructures consisting of vertically stacked two-dimensional (2D) materials have recently gained large attention due to their highly controllable electronic properties and resulting quantum phases. In contrast to the mechanically stacked multilayered systems, which offer exceptional control over a stacking sequence or interlayer twist angles, the epitaxially grown 2D materials express unprecedented quality and stability over wafer-scale lengths. However, controlling the growth conditions remains a major obstacle toward the formation of complex, epitaxial heterostructures with well-defined electronic properties. Here, we synthesized a trilayer graphene heterostructure on the SiC(0001) substrate with two specific interlayer locations occupied by gadolinium. We applied multitechnique methodology based on low-temperature scanning tunneling microscopy/spectroscopy (STM/S) and angle-resolved photoelectron spectroscopy (ARPES) to determine the intercalant’s locations in the complex, epitaxial graphene heterostructure. Our approach relies on very high quality and large, micrometer-scale homogeneity of the synthesized system. The experimentally determined electronic structure is dominated by the two topmost graphene layers. Overall, our spectroscopic results show quantitative agreement between global ARPES, local STM/S, and density functional theory predictions. The characterized electronic properties primarily reflect highly anisotropic doping levels between the two corresponding graphene layers, which significantly affect the band structure topology. Two pairs of hybridized massive Dirac bands from our initial synthesis–the bilayer graphene on the SiC(0001) substrate–are transformed upon Gd intercalation into two pairs of massless Dirac bands with a new hybridization region in between. Our results open perspectives in the realization of exotic 2D quantum materials via atomically precise synthesis of epitaxial, multilayered graphene–rare earth heterostructures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth of vertically aligned α−MoO{sub 3} nanoflakes by using a facile PVD route

In this report, we synthesize vertically aligned molybdenum trioxide (α−MoO{sub 3}) nanoflakes (NFs) with high aspect ratio (height/thickness >15) on the cobalt coated glass substrates by the plasma assisted sublimation process, employing Mo metal strip as a sublimation source. The effect of substrate temperature, nature of substrate as well as the geometry of the sublimation source (Mo-strip) have been investigated on the morphological, structural and optical properties of the grown NFs, keeping plasma parameters as fixed. The surface morphology, crystalline structure and optical properties of MoO{sub 3} NFs have been studied systematically by using scanning electron microscope (SEM), transmission electron microscope (TEM) with selected area electron diffraction (SAED), X-ray diffractometer, and IR- spectroscopy. The experimental observations endorse that the characteristics of MoO{sub 3} NFs are strongly depend on substrate temperature, substrate nature as well as geometry of Mo-strip. All the observed results are well in consonance with each other.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ocean Barrier Layers’ Effect on Tropical Cyclone Intensification

Improving a tropical cyclone's forecast and mitigating its destructive potential requires knowledge of various environmental factors that influence the cyclone's path and intensity. Herein, using a combination of observations and model simulations, we systematically demonstrate that tropical cyclone intensification is significantly affected by salinity-induced barrier layers, which are 'quasi-permanent' features in the upper tropical oceans. When tropical cyclones pass over regions with barrier layers, the increased stratification and stability within the layer reduce storm-induced vertical mixing and sea surface temperature cooling. This causes an increase in enthalpy flux from the ocean to the atmosphere and, consequently, an intensification of tropical cyclones. On average, the tropical cyclone intensification rate is nearly 50% higher over regions with barrier layers, compared to regions without. Our finding, which underscores the importance of observing not only the upper-ocean thermal structure but also the salinity structure in deep tropical barrier layer regions, may be a key to more skillful predictions of tropical cyclone intensities through improved ocean state estimates and simulations of barrier layer processes. As the hydrological cycle responds to global warming, any associated changes in the barrier layer distribution must be considered in projecting future tropical cyclone activity.

54 ENVIRONMENTAL SCIENCES↗

Turbulent Rotating Rayleigh–Bénard Convection

Rotation with thermally induced buoyancy governs many astrophysical and geophysical processes in the atmosphere, ocean, sun, and Earth's liquid-metal outer core. Rotating Rayleigh–Bénard convection (RRBC) is an experimental system that has features of rotation and buoyancy, where a container of height H and temperature difference Δ between its bottom and top is rotated about its vertical axis with angular velocity Ω. The strength of buoyancy is reflected in the Rayleigh number (~ H 3 Δ) and that of the Coriolis force in the Ekman and Rossby numbers (~Ω -1 ). Rotation suppresses the convective onset, introduces instabilities, changes the velocity boundary layers, modifies the shape of thermal structures from plumes to vortical columns, affects the large-scale circulation, and can decrease or enhance global heat transport depending on buoyant and Coriolis forcing. RRBC is an extremely rich system, with features directly comparable to geophysical and astrophysical phenomena. Here we review RRBC studies, suggest a unifying heat transport scaling approach for the transition between rotation-dominated and buoyancy-dominated regimes in RRBC, and discuss non-Oberbeck–Boussinesq and centrifugal effects.

42 ENGINEERING↗