SEARCH · Search NASA

Results for “WINGS, DELTA - CHARACTERISTICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

NASA NTRS1989

Two-stage reusable launch system utilizing a winged core vehicle and glideback boosters

A near-term technology launch system is described in which Space Shuttle main engines are used on a manned orbiter and also on twin strap-on unmanned boosters. The orbiter has a circular body and clipped delta wings. The twin strap-on boosters have a circular body and deployable oblique wings for a glideback recovery. The dry and gross weights of the system, capable of delivering 70klb of cargo to orbit, are compared with a similar system with hydrocarbon-fueled boosters and with the current Shuttle.

Macconochie, Ian O.↗

NASA NTRS1990

Prediction of vortical flows on wings using incompressible Navier-Stokes equations

Grid-density and Reynolds-number effects on integral values and static pressure distributions are presently studied in the steady-state Navier-Stokes solutions obtained for the flow around a round-edged double delta wing using an upwind-relaxation finite-difference algorithm. It is found that while the computed longitudinal aerodynamic coefficients are in good agreement with extant experimental data, the magnitudes of suction-pressure peaks are underpredicted in the vicinity of the trailing edge. It is judged that additional computations employing finer-grid solutions in the vortical flow region are required.

Hsu, C.-H.↗

NASA NTRS1989

Hypersonic 3-D flow past winged bodies

The hypersonic flow past winged bodies is calculated using the 3D Navier-Stokes equations in both a space- and time-marching finite difference code. The bodies are a blunt ogive-cylinder with a delta wing planform and an elliptical body referred to as the allbody configuration. Laminar flow solutions for the ogive-cylinder-wing body and for the allbody configuration are presented. It is shown that the present technique has an excellent shock-capturing capability for all speed regimes. An axial zonal capability is incorporated to make the procedure more versatile. The grid system is created offline using an efficient hyperbolic grid generator which can handle the rapid variations in the body cross sections.

Chaussee, Denny S.↗

NASA NTRS1995

Preliminary results of the on-demand vortex-generator experiments

This is a report on the continuation of our experimental investigations (Saddoughi 1994) of 'on-demand' vortex generators. Conventional vortex generators as found on aircraft wings are mainly for suppression of separation during the off-design conditions. In cruise they perform no useful function and exert a significant drag penalty. Therefore, replacement of fixed rectangular or delta-wing generators by devices that could be activated when needed would be of interest. Also in our previous report, we described one example of an 'on-demand' device, which was developed by Jacobson & Reynolds (1995) at Stanford University, suitable for manufacture by micro-electro-mechanical technology. This device consists of a surface cavity elongated in the stream direction and covered with a lid cantilevered at the upstream end. The lid, which is a metal sheet with a sheet of piezoelectric ceramic bonded to it, lies flush with the boundary. On application of a voltage the ceramic expands or contracts; however, adequate amplitude can be obtained only by running at the cantilever resonance frequency and applying amplitude modulation: for 2.5 mm x 20 mm cantilevered lids, they obtained maximum tip displacements of the order of 100 pm. Thus fluid is expelled from the cavity through the gap around the lid on the downstroke. They used an asymmetrical gap configuration and found that periodic emerging jets on the narrow side induced periodic longitudinal vorticity into the boundary layer. Their device was used to modify the inner layer of the boundary layer for skin-friction reduction. The same method could be implemented for the replacement of the conventional vortex generators; however, to promote mixing and suppress separation we needed to deposit longitudinal vortices into the outer layer of the boundary layer, which required a larger vortex generator than the device built by Jacobson & Reynolds. Our vortex generator was built with a mechanically-driven cantilevered lid with an adjustable frequency. The device was made about ten times the size of Jacobson & Reynolds', the shape or size of the cavity and lid (28 mm x 250 mm) could be easily changed. The cavity depth, the cantilever-tip displacement, and the maximum lid frequency were 20 mm, 10 mm, and 60 Hz respectively. Our vortex generator was mounted on a turntable so that its yaw angle could be changed. Finally, tests over a range of ratios of vortex generator size to boundary-layer thickness could be carried out simply by changing the streamwise location of the device.

Saddoughi, Seyed G.↗

NASA NTRS1999

Investigation of Vortex Flaps and Other Flow Control Devices on Generic High-Speed Civil Transport Planforms

A parametric cranked delta planform study has been conducted in the Langley 14- by 22-Foot Subsonic Tunnel with the following objectives: (1) to evaluate the vortex flap design methodology for cranked delta wings, (2) to determine the influence of leading-edge sweep and the outboard wing on vortex flap effectiveness, (3) to evaluate novel flow control concepts, and (4) to validate unstructured grid Euler computer code predictions with modeled vortex and trailing-edge flaps. Two families of cranked delta planforms were investigated. One family had constant aspect ratio, while the other had a constant nondimensional semispan location of the leading-edge break. The inboard leading-edge sweep of the planforms was varied between 68 deg., 71 deg., and 74 deg., while outboard leading-edge sweep was varied between 48 deg. and 61 deg. Vortex flaps for the different planforms were designed by an analytical vortex flap design method. The results indicate that the effectiveness of the vortex flaps was only slightly influenced by the variations in the parametric planforms. The unstructured grid Euler computer code was successfully used to model the configurations with vortex flaps. The vortex trap concept was successfully demonstrated.

Kjerstad, Kevin J.↗

NASA NTRS1986

An overview of the fundamental aerodynamics branch's research activities in wing leading-edge vortex flows at supersonic speeds

For the past 3 years, a research program pertaining to the study of wing leading edge vortices at supersonic speeds has been conducted in the Fundamental Aerodynamics Branch of the High-Speed Aerodynamics Division at the Langley Research Center. The purpose of the research is to provide an understanding of the factors governing the formation and the control of wing leading-edge vortices and to evaluate the use of these vortices for improving supersonic aerodynamic performance. The studies include both experimental and theoretical investigations and focus primarily on planform, thickness and camber effects for delta wings. An overview of this research activity is presented.

Miller, D. S.↗

NASA NTRS1977

Effect of angle of attack and Mach number on slender wing aerodynamics

An analytic theory is presented in which the classical slender wing theory is modified to account for the combined effects of large angle of attack and nonsonic Mach number on the unsteady aerodynamics. The computed results agree well with available static and dynamic experimental data for slender delta wings in the freestream Mach number range between 0 and 2.8. The method was extended to compute the unsteady aerodynamics of the space shuttle orbiter by defining an equivalent slender wing using static experimental data. The results obtained in this manner are in good agreement with dynamic experimental results for the freestream Mach number range between 0.3 and 1.2.

Ericsson, L. E.↗

NASA NTRS1983

Vortical flow management for improved configuration aerodynamics: Recent experiences

Recent progress in vortex-control applications for alleviating the adverse consequences of three dimensional separation and vortical interactions on slender body/swept wing configurations is reported. Examples include helical separation trip to alleviate the side force due to forebody vortex asymmetry; hinged strakes to avoid vortex breakdown effects; compartmentation of swept leading edge separation to delay the pitch-up instability; under wing vortex trip and vortex trip and vortex flaps for drag reduction at high lift; and an apex-flap trimmer to fully utilize the lift capability of trailing-edge flaps for take off and landing of delta wings. Experimental results on generic wind-tunnel models are presented to illustrate the vortex-management concepts involved and to indicate their potential for enhancing the subsonic aerodynamics of supersonic-cruise type vehicles.

Rao, D. M.↗

NASA NTRS1973

Wind-tunnel roll-damping measurements of a winged space shuttle configuration in launch attitude

Ground-wind load studies were conducted on three model configurations to assess the importance of aeroelastic instabilities of erected space shuttle vehicles. Roll damping was measured on a fuselage-alone model, which had a D cross section, and a fuselage and tail surfaces in combination with either a clipped-delta wing or a low-sweep tapered wing as the primary lifting surface. The largest negative roll-damping coefficients were measured with the fuselage-alone configuration and were a function of wind azimuth. At the wind azimuths at which the wing-fuselage configuration was unstable, the negative roll-damping coefficients were a function of reduced frequency.

Hess, R. W.↗

NASA NTRS2001

System Identification of a Vortex Lattice Aerodynamic Model

The state-space presentation of an aerodynamic vortex model is considered from a classical and system identification perspective. Using an aerodynamic vortex model as a numerical simulator of a wing tunnel experiment, both full state and limited state data or measurements are considered. Two possible approaches for system identification are presented and modal controllability and observability are also considered. The theory then is applied to the system identification of a flow over an aerodynamic delta wing and typical results are presented.

Juang, Jer-Nan↗

NASA NTRS1956

The proper combination of lift loadings for least drag on a supersonic wing

Lagrange's method of undetermined multipliers is applied to the problem of properly combining lift loadings for the least drag at a given lift on supersonic wings. The method shows the interference drag between the optimum loading and any loading at the same lift coefficient to be constant. This is an integral form of the criterion established by Robert T. Jones for optimum loadings. The best combination of four loadings on a delta wing with subsonic leading edges is calculated as a numerical example. The loadings considered have finite pressures everywhere on the plan form. Through the sweepback range the optimum combination of the four nonsingular loadings has about the same drag coefficient as a flat plate with leading-edge thrust.

Grant, Frederick C↗

NASA NTRS2017

Wind Tunnel Investigation of Passive Porosity Applied to the Leading-Edge Extension and Leading-Edge Flaps on a Slender Wing at Subsonic Speed

A wind tunnel experiment was conducted in the NASA Langley Research Center 7- by 10-Foot High Speed Tunnel to determine the effects of passive surface porosity on the subsonic vortex flow interactions about a general research fighter configuration. Flow-through porosity was applied to the leading-edge extension, or LEX, and leading-edge flaps mounted to a 65deg cropped delta wing model as a potential vortex flow control technique at high angles of attack. All combinations of porous and nonporous LEX and flaps were investigated. Wing upper surface static pressure distributions and six-component forces and moments were obtained at a free-stream Mach number of 0.20 corresponding to a Reynolds number of 1.35(106) per foot, angles of attack up to 45deg, angles of sideslip of 0deg and +/-5deg, and leading-edge flap deflections of 0deg and 30deg.

Erickson, Gary E.↗

NASA NTRS1978

Sonic-box method employing local Mach number for oscillating wings with thickness

A computer program was developed to account approximately for the effects of finite wing thickness in the transonic potential flow over an oscillating wing of finite span. The program is based on the original sonic-box program for planar wing which was previously extended to include the effects of the swept trailing edge and the thickness of the wing. Account for the nonuniform flow caused by finite thickness is made by application of the local linearization concept. The thickness effect, expressed in terms of the local Mach number, is included in the basic solution to replace the coordinate transformation method used in the earlier work. Calculations were made for a delta wing and a rectangular wing performing plunge and pitch oscillations, and the results were compared with those obtained from other methods. An input quide and a complete listing of the computer code are presented.

Ruo, S. Y.↗

NASA NTRS1993

Computational aeroelasticity

Recent large-scale studies of computational unsteady aerodynamics for aeroelastic applications are reviewed. The variety of fluid dynamic flow models available to address such computations are illustrated in two cases: (1) 2D Navier-Stokes (NS) equations illustrating the highest level of modeling usually employed and (2) the transonic small-disturbance potential equation representing the entry level for nonlinear flow modeling. Estimates of computer resources necessary to produce accurate converged results are given. Application of potential and NS equation codes for flows which are generally at lower angles and high speeds are addressed, including (1) the treatment of wings and configuration details using potential equation codes and (2) recent NS code calculations of complete vehicle configurations. Attention is given to high-angle conditions involving separated vortex-dominated flows. Accuracy requirements for vortex shedding over airfoils is discussed and the calculation of vorticity convected over significant distances is addressed. Steady CFD computations about delta wings at high angles are given, including a discussion of the required level of fluid dynamic flow modeling. Recent results on unsteady 'buffetlike flow' about complete vehicle models are reviewed.

Edwards, John W.↗

NASA NTRS1984

Numerical computation of viscous flow around bodies and wings moving at supersonic speeds

Research in aerodynamics is discussed. The development of equilibrium air curve fits; computation of hypersonic rarefield leading edge flows; computation of 2-D and 3-D blunt body laminar flows with an impinging shock; development of a two-dimensional or axisymmetric real gas blunt body code; a study of an over-relaxation procedure forthe MacCormack finite-difference scheme; computation of 2-D blunt body turbulent flows with an impinging shock; computation of supersonic viscous flow over delta wings at high angles of attack; and computation of the Space Shuttle Orbiter flowfield are discussed.

Tannehill, J. C.↗

NASA NTRS1983

A lifting surface theory in rotational flow

The partial differential equation for small disturbance steady rotational flow in three dimensions is solved through an integral equation approach. The solution is obtained by using the method of weighted residuals. Specific applications are directed to wings in nonuniform subsonic parallel streams with velocity varying in vertical and spanwise directions and to airfoils in nonuniform freestream. Comparison with limited known results indicates that the present method is reasonably accurate. Numerical results for the lifting pressure of airfoil, lift, induced drag, and pitching moments of airfoil, lift, induced drag, and pitching moments of elliptic, rectangular, and delta wings in a jet, wake, or monotonic sheared stream are presented. It is shown that, in addition to the effect of local dynamic pressures, a positive velocity gradient tends to enhance the lift.

Shiau, M. J.↗

NASA NTRS1988

Unsteady vortex-dominated flows around maneuvering wings over a wide range of Mach numbers

The problem of unsteady flow around maneuvering wings is solved using the unsteady Euler equations. The unsteady conservative Euler equations are derived for the flow relative motion with respect to a moving (translating and rotating) frame of reference. The resulting equations can handle the most general case for unsteady three-dimensional flow around maneuvering wings or wing-body configurations undergoing six degrees of freedom motion; three translations and three rotations. The equations are solved using two computational schemes; an explicit multistage finite-volume scheme and an implicit approximately factored finite-volume scheme. The computational applications cover two cases. The first case is for a locally conical supersonic flow of rolling oscillation of a sharp-edged delta wing at zero angle of attack. The second case is for a pitching oscillation around a mean angle of attack of a NACA 0012 airfoil in transonic flow.

Kandil, Osama A.↗

NASA NTRS1983

An investigation of wing leading-edge vortices at supersonic speeds

Studies at subsonic and transonic speeds of the fundamental vortex behavior on the leeward surface of wings have led to the design of several unique and novel leading-edge devices commonly referred to as 'vortex flaps'. The present investigation has the objective to provide some fundamental vortex-flow results obtained at supersonic speeds. Experimental studies were performed in which pressure data and several types of flow visualization data were obtained on the leeward surface of a series of flat delta-wing models to identify the various flow mechanisms which can occur and to determine the effect of leading-edge sweep, Mach number, and angle of attack on the vortex strength and location. The reported investigation forms part of a study which is to explore the use of wing leading-edge vortex technology as a supersonic wing-design tool. The obtained results indicate that the procedure of distributing the vortex force as a pressure variation about a vortex action line is a promising concept.

Miller, D. S.↗