SEARCH · Search NASA

Results for “boundary conditions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Typological representation of the offshore oceanographic environment along the Alaskan North Slope

Erosion and flooding impacts to Arctic coastal environments are intensifying with nearshore oceanographic conditions acting as a key environmental driver. Robust and comprehensive assessment of the nearshore oceanographic conditions require knowledge of the following boundary conditions: incident wave energy, water level, incident wind energy, ocean temperature and salinity, bathymetry, and shoreline orientation. The number of offshore oceanographic boundary conditions can be large, requiring a significant computational investment to reproduce nearshore conditions. This present study develops location-independent typologies to reduce the number of boundary conditions needed to assess nearshore oceanographic environments in both a Historical (2007–2019) and Future (2020–2040) timespan along the Alaskan North Slope. We used WAVEWATCH III® and Delft3D Flexible Mesh model output from six oceanographic sites located along a constant ~50 m bathymetric line spanning the Chukchi to Beaufort Seas. K-means clustering was applied to the energy-weighted joint-probability distribution of significant wave height (H s ) and peak period (T p ). Distributions of wave and wind direction, wind speed, and water level associated with location-independent centroids were assigned single values to describe a reduced order, typological rendition of offshore oceanographic conditions. Reanalysis data (e.g., ASRv2, ERA5, and GOFS) grounded the historical simulations while projected conditions were obtained from downscaled GFDL-CM3 forced under RCP8.5 conditions. Location-dependence for each site is established through the occurrence joint-probability distribution in the form of unique scaling factors representing the fraction of time that the typology would occupy over a representative year. As anticipated, these typologies show increasingly energetic ocean conditions in the future. They also enable computationally efficient simulation of the nearshore oceanographic environment along the North Slope of Alaska for better characterization of coastal processes (e.g., erosion, flooding, or sediment transport).

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS2001

Structural and Acoustic Numerical Modeling of a Curved Composite Honeycomb Panel

The finite and boundary element modeling of the curved section of a composite honeycomb aircraft fuselage sidewall was validated for both structural response and acoustic radiation. The curved panel was modeled in the pre-processor MSC/PATRAN. Geometry models of the curved panel were constructed based on the physical dimensions of the test article. Material properties were obtained from the panel manufacturer. Finite element models were developed to predict the modal parameters for free and supported panel boundary conditions up to a frequency of 600 Hz. Free boundary conditions were simulated by providing soft foam support under the four comers of the panel or by suspending the panel from elastic bands. Supported boundary conditions were obtained by clamping the panel between plastic tubing seated in grooves along the perimeter of a stiff and heavy frame. The frame was installed in the transmission loss window of the Structural Acoustic Loads and Transmission (SALT) facility at NASA Langley Research Center. The structural response of the curved panel due to point force excitation was predicted using MSC/NASTRAN and the radiated sound was computed with COMET/Acoustics. The predictions were compared with the results from experimental modal surveys and forced response tests on the fuselage panel. The finite element models were refined and updated to provide optimum comparison with the measured modal data. Excellent agreement was obtained between the numerical and experimental modal data for the free as well as for the supported boundary conditions. Frequency response functions (FRF) were computed relating the input force excitation at one panel location to the surface acceleration response at five panel locations. Frequency response functions were measured at the same locations on the test specimen and were compared with the calculated FRF values. Good agreement was obtained for the real and imaginary parts of the transfer functions when modal participation was allowed up to 3000 Hz. The validated finite element model was used to predict the surface velocities due to the point force excitation. Good agreement was obtained between the spatial characteristics of the predicted and measured surface velocities. The measured velocity data were input into the acoustic boundary element code to compute the sound radiated by the panel. The predicted sound pressure levels in the far-field of the panel agreed well with the sound pressure levels measured at the same location.

Grosveld, Ferdinand W.↗

NASA NTRS1989

Scattering by a two dimensional groove in a ground plane

Higher order boundary conditions involve derivatives of the fields beyond the first and were recently shown to be more effective than traditional first order conditions in modeling dielectric coatings and layers. In this report an application of a third order generalized boundary condition to scattering by a filled rectangular groove is presented. Deficiencies of such higher order boundary conditions are addressed and a correction is proposed for the present case. As part of the process of examining and improving the accuracy of the proposed generalized boundary conditions, an exact solution is developed and a comparison is provided with a solution based on the standard impedance boundary condition.

Barkeshli, K.↗

NASA NTRS1989

Numerical analysis of flow through oscillating cascade sections

The design of turbomachinery blades requires the prevention of flutter for all operating conditions. However, flow field predictions used for aeroelastic analysis are not well understood for all flow regimes. The present research focuses on numerical solutions of the Euler and Navier-Stokes equations using an ADI procedure to model two-dimensional, transonic flow through oscillating cascades. The model prescribes harmonic pitching motions for the blade sections for both zero and nonzero interblade phase angles. The code introduces the use of a deforming grid technique for convenient specification of the periodic boundary conditions. Approximate nonreflecting boundary conditions were coded for the inlet and exit boundary conditions. Sample unsteady solutions were performed for an oscillating cascade and compared to experimental data. Also, test cases were run for a flat plate cascade to compare with the unsteady, small-perturbation, subsonic analyis. The predictions for oscillating cascades with nonzero interblade phase angle cases, which were near a resonant condition, differ from the experiment and theory. The zero degree interblade phase angle cases, which were near a resonant condition, differ from the experiment and theory. Studies on reflecting versus nonreflecting inlet and exit boundary conditions show that the treatment of the boundary can have a significant effect on the first harmonic, unsteady pressure distributions for certain flow conditions.

Huff, Dennis L.↗

NASA NTRS1989

Numerical analysis of flow through oscillating cascade sections

The design of turbomachinery blades requires the prevention of flutter for all operating conditions. However, flow field predictions used for aeroelastic analysis are not well understood for all flow regimes. The present research focuses on numerical solutions of the Euler and Navier-Stokes equations using an ADI procedure to model two-dimensional, transonic flow through oscillating cascades. The model prescribes harmonic pitching motions for the blade sections for both zero and non-zero inter-blade phase angles. The code introduces the use of a deforming grid technique for convenient specification of the periodic boundary conditions. Approximate nonreflecting boundary conditions have been coded for the inlet and exit boundary conditions. Sample unsteady solutions have been performed for an oscillating cascade and compared to experimental data. Also, test cases were fun for a flat plate cascade to compare with an unsteady, small-perturbation, subsonic analysis. The predictions for oscillating cascades with non-zero inter-blade phase angles are in good agreement with experimental data and small-perturbation theory. The zero degree inter-blade phase angle cases, which were near a resonant condition, differ from the experiment and theory. Studies on reflecting versus non-reflecting inlet and exit boundary conditions show that the treatment of the boundary can have a significant effect on the first harmonic, unsteady pressure distributions for certain flow conditions. This code is expected to be used as a tool for reviewing simpler models that do not include the full nonlinear aerodynamics or as a final check for designs against flutter in turbomachinery.

Huff, Dennis L.↗

NASA NTRS1998

Anomalous Buckling Characteristics of Laminated Metal-Matrix Composite Plates with Central Square Holes

Compressive buckling analysis was performed on metal-matrix composite (MMC) plates with central square holes. The MMC plates have varying aspect ratios and hole sizes and are supported under different boundary conditions. The finite-element structural analysis method was used to study the effects of plate boundary conditions, plate aspect ratio, hole size, and the composite stacking sequence on the compressive buckling strengths of the perforated MMC plates. Studies show that by increasing the hole sizes, compressive buckling strengths of the perforated MMC plates could be considerably increased under certain boundary conditions and aspect ratios ("anomalous" buckling behavior); and that the plate buckling mode could be symmetrical or antisymmetrical, depending on the plate boundary conditions, aspect ratio, and the hole size. For same-sized plates with same-sized holes, the compressive buckling strengths of the perforated MMC plates with [90/0/0/90]2 lamination could be as much as 10 percent higher or lower than those of the [45/- 45/- 45/45]2 laminations, depending on the plate boundary conditions, plate aspect ratios, and the hole size. Clamping the plate edges induces far stronger "anomalous" buckling behavior (enhancing compressive buckling strengths at increasing hole sizes) of the perforated MMC plates than simply supporting the plate edges.

Ko, William L.↗

NASA NTRS1993

Guidance law development for aeroassisted transfer vehicles using matched asymptotic expansions

This report addresses and clarifies a number of issues related to the Matched Asymptotic Expansion (MAE) analysis of skip trajectories, or any class of problems that give rise to inner layers that are not associated directly with satisfying boundary conditions. The procedure for matching inner and outer solutions, and using the composite solution to satisfy boundary conditions is developed and rigorously followed to obtain a set of algebraic equations for the problem of inclination change with minimum energy loss. A detailed evaluation of the zeroth order guidance algorithm for aeroassisted orbit transfer is performed. It is shown that by exploiting the structure of the MAE solution procedure, the original problem, which requires the solution of a set of 20 implicit algebraic equations, can be reduced to a problem of 6 implicit equations in 6 unknowns. A solution that is near optimal, requires a minimum of computation, and thus can be implemented in real time and on-board the vehicle, has been obtained. Guidance law implementation entails treating the current state as a new initial state and repetitively solving the zeroth order MAE problem to obtain the feedback controls. Finally, a general procedure is developed for constructing a MAE solution up to first order, of the Hamilton-Jacobi-Bellman equation based on the method of characteristics. The development is valid for a class of perturbation problems whose solution exhibits two-time-scale behavior. A regular expansion for problems of this type is shown to be inappropriate since it is not valid over a narrow range of the independent variable. That is, it is not uniformly valid. Of particular interest here is the manner in which matching and boundary conditions are enforced when the expansion is carried out to first order. Two cases are distinguished-one where the left boundary condition coincides with, or lies to the right of, the singular region, and another one where the left boundary condition lies to the left of the singular region. A simple example is used to illustrate the procedure where the obtained solution is uniformly valid to O(Epsilon(exp 2)). The potential application of this procedure to aeroassisted plane change is also described and partially evaluated.

Calise, Anthony J.↗

NASA NTRS1988

Finite volume computation of unsteady inviscid rotational transonic flows past airfoils in rigid body motion

Unsteady inviscid transonic flow over airfoils in arbitrary rigid body motion is analyzed numerically by solving the two-dimensional unsteady Euler equations in integral form using a finite volume scheme. The solution procedure is based on an explicit Runge-Kutta time-stepping scheme wherein the spatial terms are central-differenced and a combination of second- and fourth-differences in the flow variables are used to form the numerical dissipation terms to stabilize the scheme. Unsteady calculations are started from converged steady-state solutions as initial conditions. Nonreflective boundary conditions are imposed on the far-field boundaries. Results are presented and, where possible, validated against available numerical and experimental data for airfoils subjected to a step change in angle of attack, airfoils oscillating and plunging in transonic flow, and airfoils immersed in a time-varying free stream.

Damodaran, Murali↗

DOE OSTI2020

Hydrodynamics of two-dimensional compressible fluid with broken parity: Variational principle and free surface dynamics in the absence of dissipation

In this paper, we consider an isotropic compressible nondissipative fluid with broken parity subject to free surface boundary conditions in two spatial dimensions. The hydrodynamic equations describing the bulk dynamics of the fluid and the free surface boundary conditions depend explicitly on the parity-breaking nondissipative odd viscosity term. We construct an effective action which gives both bulk hydrodynamic equations and free surface boundary conditions. The free surface boundary conditions require an additional boundary term in the action which resembles a 1+1D chiral boson field coupled to the background geometry. We solve the linearized hydrodynamic equations for the deep water case and derive the dispersion of chiral surface waves. We show that in the long-wavelength limit the flow profile exhibits an oscillating vortical boundary layer near the free surface. The layer thickness is controlled by the ratio between the odd viscosity (ν o ) and the sound velocity (c s ), δ ~ ν o /c s . In the incompressible limit, c s → ∞, the vortical boundary layer becomes singular with the vorticity within the layer diverging as ω ~ c s . The boundary layer is formed by odd viscosity coupling the divergence of velocity ∇ • v to vorticity ∇ × v. It results in nontrivial chiral free surface dynamics even in the absence of external forces. The structure of the odd-viscosity-induced boundary layer is very different from the conventional free surface boundary layer associated with dissipative shear viscosity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1994

Numerical modeling of coronal mass ejections based on various pre-event model atmospheres

We examine how the initial state (pre-event corona) affects the numerical MHD simulation for a coronal mass ejection (CME). Earlier simulations based on a pre-event corona with a homogeneous density and temperature distribution at lower boundary (i.e. solar surface) have been used to analyze the role of streamer properties in determining the characteristics of loop-like transients. The present paper extends these studies to show how a broader class of global coronal properties leads not only to different types of CME's, but also modifies the adjacent quiet corona and/or coronal holes. We consider four pre-event coronal cases: (1) Constant boundary conditions and a polytropic gas with gamma = 1.05; (2) Non-constant (latitude dependent) boundary conditions and a polytropic gas with gamma = 1.05; (3) Constant boundary conditions with a volumetric energy source and gamma = 1.67; (4) Non-constant (latitude dependent) boundary conditions with a volumetric energy source and gamma = 1.67. In all models, the pre-event magnetic fields separate the corona into closed field regions (streamers) and open field regions. The CME's initiation is simulated by introducing at the base of the corona, within the streamer region, a standard pressure pulse and velocity change. Boundary values are determined using MHD characteristic theory. The simulations show how different CME's, including loop-like transients, clouds, and bright rays, might occur. There are significant new features in comparison to published results. We conclude that the pre-event corona is a crucial factor in dictating CME's properties.

Suess, S. T.↗

NASA NTRS1995

Numerical Modeling of Coronal Mass Ejections Based on Various Pre-event Model Atmospheres

We examine how the initial state (pre-event corona) affects the numerical MHD simulation for a coronal mass ejection (CME). Earlier simulations based on a pre-event corona with a homogeneous density and temperature distribution, at the lower boundary (i.e., solar surface) have been used to analyze the role of streamer properties in determining the characteristics of loop-like transients. The present paper extends these studies to show how a broader class of global coronal properties leads not only to different types of CME's, but also modifies the adjacent quiet corona and/or coronal holes. We consider four pre-event coronal cases: (1) constant boundary conditions and a polytropic gas with gamma = 1.05; (2) non-constant (latitude dependent) boundary conditions and a polytropic gas with gamma = 1.05; (3) constant boundary conditions with a volumetric energy source and gamma = 1.67; (4) non-constant (latitude dependent) boundary conditions with a volumetric energy source and gamma = 1.67. In all models, the pre-event magnetic fields separate the corona into closed field regions (streamers) and open field regions. The CME's initiation is simulated by introducing at the base of the corona, within the streamer region, a standard pressure pulse and velocity change. Boundary values are determined using magnetohydrodynamic (MHD) characteristic theory. The simulations show how different CME's, including loop-like transients, clouds and bright rays, might occur. There are significant new features in comparison to published results. We conclude that the pre-event corona is a crucial factor in dictating CME's properties.

Wang, A. H.↗

NASA NTRS1981

Far field conditions for compressible flows

The numerical treatment of exterior regions requires a method to convert the problem to one in a bounded region. One method is to truncate the unbounded region at some finite, artificial surface. This creates a finite computational region at the expense of imposing boundary conditions at the artificial boundary. If the problem has wave-like solutions near infinity, then these boundary conditions must simulate the radiation of energy out of the computational domain and towards infinity. Incorrect specification of these radiation boundary conditions can cause spurious reflected waves to be generated at the artificial boundary. Radiation boundary conditions which have the following properties were constructed: to accurately simulate the radiation of energy out of the computational domain; to accomplish the simulation with an accuracy which improves as fast as feasible as the artificial surface is moved outward; and to accelerate convergence to the steady state (by minimizing spurious reflections).

Bayliss, A.↗

DOE OSTI2022

Mason–Weaver theory: Revised and extended for a semi-infinite domain

Mason and Weaver developed equations to describe small particles settling under the influence of gravity and Brownian motion, including the limiting case for an infinitely deep suspension. We encountered this common convection–diffusion equation and no-flux boundary conditions in a model for dynamics of adsorbed polymers in dead end pores of a depolymerization catalyst. Close examination reveals that the Mason–Weaver solution is not correct for the infinite domain with a non-uniform initial condition. In this paper, we obtain the time dependent Green’s function for the no flux boundary condition and also for a more general reactive boundary condition. We demonstrate how the results provide solutions, via superposition, which provide solutions for several boundary conditions and all initial conditions.

Chen, Ziqiu↗

NASA NTRS2023

Numerical Investigation of Film Coefficient Approximation for Chemically Reacting Boundary-Layer Flows

Aerothermal analysis of spacecraft planetary entry is heavily dependent on heritage engineering models. The film coefficient heat transfer model examined in this paper estimates the convective heating to the vehicle for a laminar, dissociated, chemically reacting boundary layer for an Earth atmosphere. This model requires information about the vehicle and flowfield for a given trajectory point and estimates a proportional relationship between enthalpy potential and convective heat flux. In practice it is the aerothermal engineer who must decide which assumptions are appropriate for his/her application. This work looks at numerous CFD simulations for an arbitrary, axisymmetric flight vehicle to analyze the relative importance of both the mass and energy constraints imposed at the wall boundary, as well as the effect of various diffusion models. Within the subset of tested energy boundary conditions, it is found that the most desirable energy boundary condition is the radiative equilibrium boundary condition, which permits conservative estimates of convective heat flux, but also generates flowfield-dependent spatial thermal distributions along the surface. Other key findings are presented in an effort to make the film coefficient engineering model readily available to design engineers across industry.

Film coefficient↗

NASA NTRS1993

High order accurate solutions of viscous problems

We consider a fourth order extension to MacCormack's scheme. The original extension was fourth order only for the inviscid terms but was second order for the viscous terms. We show how to modify the viscous terms so that the scheme is uniformly fourth order in the spatial derivatives. Applications are given to some boundary layer flows. In addition, for applications to shear flows the effect of the outflow boundary conditions are very important. We compare the accuracy of several of these different boundary conditions for both boundary layer and shear flows. Stretching at the outflow usually increases the oscillations in the numerical solution but the addition of a filtered sponge layer (with or without stretching) reduces such oscillations. The oscillations are generated by insufficient resolution of the shear layer. When the shear layer is sufficiently resolved then oscillations are not generated and there is less of a need for a nonreflecting boundary condition.

Hayder, M. E.↗

NASA NTRS1993

High order accurate solutions of viscous problems

Hayder, M. Ehtesham↗

NASA NTRS1993

Finite difference time domain analysis of chirped dielectric gratings

The finite difference time domain (FDTD) method for solving Maxwell's time-dependent curl equations is accurate, computationally efficient, and straight-forward to implement. Since both time and space derivatives are employed, the propagation of an electromagnetic wave can be treated as an initial-value problem. Second-order central-difference approximations are applied to the space and time derivatives of the electric and magnetic fields providing a discretization of the fields in a volume of space, for a period of time. The solution to this system of equations is stepped through time, thus, simulating the propagation of the incident wave. If the simulation is continued until a steady-state is reached, an appropriate far-field transformation can be applied to the time-domain scattered fields to obtain reflected and transmitted powers. From this information diffraction efficiencies can also be determined. In analyzing the chirped structure, a mesh is applied only to the area immediately around the grating. The size of the mesh is then proportional to the electric size of the grating. Doing this, however, imposes an artificial boundary around the area of interest. An absorbing boundary condition must be applied along the artificial boundary so that the outgoing waves are absorbed as if the boundary were absent. Many such boundary conditions have been developed that give near-perfect absorption. In this analysis, the Mur absorbing boundary conditions are employed. Several grating structures were analyzed using the FDTD method.

Hochmuth, Diane H.↗

NASA NTRS1980

A Navier-Stokes fast solver for turbulence modeling applications

A computer code for the evaluation and/or optimization of the predicative potential of second order turbulent closure models in simple two dimensional flow configurations is discussed. A procedure for the numerical solution of the steady constant property Navier-Stokes equations are described together with algebraic, one dimensional and two dimensional equations of turbulence closure models. Four turbulence models are compared with several sets of experimental data. The effects of initial conditions and boundary conditions are also described. The effects of purely numerical parameters, such as mesh size, boundary locations, and convergence criteria are presented.

Murphy, J. D.↗