Search NASA⌕ Search

SEARCH · Search NASA

Results for “buffer layers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Electron transport properties of antimony doped SnO{sub 2} single crystalline thin films grown by plasma-assisted molecular beam epitaxy

By antimony doping tin oxide, SnO{sub 2}:Sb (ATO), below 1.0% Sb concentration, controllable n-type doping was realized. Plasma-assisted molecular beam epitaxy has been used to grow high quality single crystalline epitaxial thin films of unintentionally doped (UID) and Sb-doped SnO{sub 2} on r-plane sapphire substrates. A UID thickness series showed an electron concentration of 7.9x10{sup 18} cm{sup -3} for a 26 nm film, which decreased to 2.7x10{sup 17} cm{sup -3} for a 1570 nm film, whereas the mobility increased from 15 to 103 cm{sup 2}/V s, respectively. This series illustrated the importance of a buffer layer to separate unintentional heterointerface effects from the effect of low Sb doping. Unambiguous bulk electron doping was established by keeping the Sb concentration constant but changing the Sb-doped layer thickness. A separate doping series correlated Sb concentration and bulk electron doping. Films containing between 9.8x10{sup 17} and 2.8x10{sup 20} Sb atoms/cm{sup 3} generated an electron concentration of 1.1x10{sup 18}-2.6x10{sup 20} cm{sup -3}. As the atomic Sb concentration increased, the mobility and resistivity decreased from 110 to 36 cm{sup 2}/V s and 5.1x10{sup -2} to 6.7x10{sup -4} OMEGA cm, respectively. The Sb concentration was determined by secondary ion mass spectrometry. X-ray diffraction and atomic force microscopy measurements showed no detrimental effects arising from the highest levels of Sb incorporation. Temperature dependent Hall measurements established a lower limit for the Sb electron activation energy of 13.2 meV and found that films with greater than 4.9x10{sup 19} electrons/cm{sup 3} were degenerately doped. Within experimental uncertainties, 100% donor efficiency was determined for Sb-doped SnO{sub 2} in the range studied.

36 MATERIALS SCIENCE↗

Customizing electron confinement in plasma-assembled Si/AlN nanodots for solar cell applications

Size-uniform Si nanodots (NDs) are synthesized on an AlN buffer layer at low Si(111) substrate temperatures using inductively coupled plasma-assisted magnetron sputtering deposition. High-resolution electron microscopy reveals that the sizes of the Si NDs range from 9 to 30 nm. Room-temperature photoluminescence (PL) spectra indicate that the energy peak shifts from 738 to 778 nm with increasing the ND size. In this system, the quantum confinement effect is fairly strong even for relatively large (up to 25 nm in diameter) NDs, which is promising for the development of the next-generation all-Si tandem solar cells capable of effectively capturing sunlight photons with the energies between 1.7 (infrared: large NDs) and 3.4 eV (ultraviolet: small NDs). The strength of the resulting electron confinement in the Si/AlN ND system is evaluated and justified by analyzing the measured PL spectra using the ionization energy theory approximation.

36 MATERIALS SCIENCE↗

High-temperature molecular beam epitaxial growth of AlGaN/GaN on GaN templates with reduced interface impurity levels

We present combined in situ thermal cleaning and intentional doping strategies near the substrate regrowth interface to produce high-quality AlGaN/GaN high electron mobility transistors on semi-insulating (0001) GaN templates with low interfacial impurity concentrations and low buffer leakage. By exposing the GaN templates to an optimized thermal dissociation step in the plasma-assisted molecular beam epitaxy environment, oxygen, carbon, and, to lesser extent, Si impurities were effectively removed from the regrowth interface under preservation of good interface quality. Residual Si was further compensated by C-doped GaN via CBr{sub 4} to yield highly resistive GaN buffer layers. Improved N-rich growth conditions at high growth temperatures were then utilized for subsequent growth of the AlGaN/GaN device structure, yielding smooth surface morphologies and low residual oxygen concentration with large insensitivity to the (Al+Ga)N flux ratio. Room temperature electron mobilities of the two-dimensional electron gas at the AlGaN/GaN interface exceeded >1750 cm{sup 2}/V s and the dc drain current reached {approx}1.1 A/mm at a +1 V bias, demonstrating the effectiveness of the applied methods.

36 MATERIALS SCIENCE↗

Structural and Magnetic Characterization of EuTe/SnTe Superlattices Grown by Molecular Beam Epitaxy

Here we investigate the structural and magnetic properties of 24 repetitions EuTe/SnTe superlattices (SLs), with 3 monolayers (ML) EuTe films and SnTe thicknesses between 13 and 36 ML. The SLs were grown by molecular beam epitaxy on 3 {mu}m SnTe buffer layers, grown on top of (111)BaF{sub 2} substrates. High resolution x-ray diffraction measurements indicated that the SLs with thicker SnTe layers have higher structural quality. This is due to the SnTe growth mode on EuTe, which starts in islands and evolves to layer-by-layer. The magnetic diffraction peak observed for the higher quality SLs proved the existence of antiferromagnetic order within the individual EuTe layers. Decreasing the width of the non-magnetic SnTe layers resulted in rougher interfaces, and the fading of the magnetic peak signal. The magnetization versus applied field curves indicated that the magnetic moments of SLs with thinner SnTe layers were also harder to align along the field direction. We interpret our results considering the loss of Eu neighbors, related with the increasing roughness of the SL interfaces.

36 MATERIALS SCIENCE↗

Influence of the substrate stiffness on the crystallization process of sputtered TbFe{sub 2} thin films

Despite the giant magnetostriction of TbFe{sub 2}, this material has a very limited popularity in real applications, due to the difficulties for obtaining the Laves phase on thin films. Here we report on the properties of annealed TbFe{sub 2} films deposited by sputtering on different substrates and with different buffer materials. We find that the presence of the highly magnetostrictive Laves phase is not necessarily related to crystallinity of the substrate. Strikingly we find a correlation between the degree of TbFe{sub 2} crystallization and the rigidity of the substrate or the buffer layer underneath the TbFe{sub 2}. This opens the possibility of easy manufacturing of devices based on TbFe{sub 2} layers.

36 MATERIALS SCIENCE↗

Sulfur gradient-driven Se diffusion at the CdS/CuIn(S,Se){sub 2} solar cell interface

The diffusion behavior of Se at the CdS/Cu(In,Ga)(S,Se){sub 2} thin film solar cell interface was investigated by x-ray photoelectron spectroscopy and x-ray excited Auger electron spectroscopy. Buffer/absorber structures with S/Se ratios between zero and three at the initial Cu(In,Ga)(S,Se){sub 2} surface were analyzed. Samples from a high-efficiency laboratory process (NREL) as well as from an industrial large-area process (AVANCIS) were investigated. We find selenium diffusion into the CdS buffer layer, the magnitude of which strongly depends on the S content at the absorber surface. The associated modification of the heterojunction partners has significant impact on the electronic structure at the interface.

36 MATERIALS SCIENCE↗

Fatigue and ferroelectric behavior of La and Zn comodified BiFeO{sub 3} thin films

Bi{sub 0.90}La{sub 0.10}Fe{sub 0.95}Zn{sub 0.05}O{sub 3} (BLFZO) thin films were grown directly on Pt/TiO{sub 2}/SiO{sub 2}/Si(100) substrates without any buffer layer by off-axis radio frequency sputtering. The BLFZO thin film deposited at 580 deg. C possesses a single-phase purity, while those deposited at other temperatures exhibit a varying amount of second phases, indicating that the deposition temperature plays a critical role in the phase development of BLFZO thin films. Although La and Zn cosubstitutions lower the Curie temperature (T{sub c}) of BiFeO{sub 3} thin films, the resulting T{sub c} value ({approx}630 deg. C) is still much higher as compared to other lead-based or lead-free ferroelectric thin films. The BLFZO thin film exhibits a remanent polarization of 2P{sub r{approx}}131.7 {mu}C/cm{sup 2} and a coercive field of 2E{sub c{approx}}496 kV/cm, in association with the improvement in electrical resistance. On the basis of the studies for frequency (1 kHz{approx}1 MHz) and driving field (0.8E{sub c{approx}}2.0E{sub c}) dependences, the BLFZO thin film demonstrates the desired fatigue endurance and weak frequency and driving field dependence. La and Zn cosubstitutions are shown to contribute toward the high remanent polarization and fatigue endurance.

36 MATERIALS SCIENCE↗

Electrical Characteristics and Interface Properties of III Nitride-Based Metal-Insulator-Semiconductor Structure

In this work, III-Nitride based metal-insulator-semiconductor (MIS) structure has been studied using AlN/GaN heterostructures on Si (111) with AlN buffer layer grown by plasma-assisted molecular beam epitaxy (MBE). The structural and electrical characteristics of the films were studied through high resolution x-ray diffraction (HRXRD), capacitance-voltage (C-V) and current-voltage (I-V) measurements. The value of flat-band voltage was -0.7 V. A total fixed oxide charge density of 2.73x10{sup 11} cm{sup -2} was estimated. Terman's method was used to obtain the density of interface state in the MIS structure. The analysis showed low interface state density values of 3.66x10{sup 11} cm{sup -2} eV{sup -1}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Coherent heteroepitaxy of Bi{sub 2}Se{sub 3} on GaAs (111)B

We report the heteroepitaxy of single crystal thin films of Bi{sub 2}Se{sub 3} on the (111)B surface of GaAs by molecular beam epitaxy. We find that Bi{sub 2}Se{sub 3} grows highly c-axis oriented, with an atomically sharp interface with the GaAs substrate. By optimizing the growth of a very thin GaAs buffer layer before growing the Bi{sub 2}Se{sub 3}, we demonstrate the growth of thin films with atomically flat terraces over hundreds of nanometers. Initial time-resolved Kerr rotation measurements herald opportunities for probing coherent spin dynamics at the interface between a candidate topological insulator and a large class of GaAs-based heterostructures.

36 MATERIALS SCIENCE↗

Epitaxial integration of photoresponsive Bi{sub 0.4}Ca{sub 0.6}MnO{sub 3} with Si(001)

Previously it has been shown that the resistivity of Bi{sub 0.4}Ca{sub 0.6}MnO{sub 3} epitaxial thin films on oxide substrates decreases significantly upon illumination with visible light. The resistivity decrease is observed over a wide temperature range and is understood as arising due to the destruction of charge ordering. The light responsivity makes Bi{sub 0.4}Ca{sub 0.6}MnO{sub 3} thin films attractive for photonic and optoelectronic device applications. In this paper, we report the heteroepitaxy of Bi{sub 0.4}Ca{sub 0.6}MnO{sub 3} thin films on (001) Si which is relevant for the potential integration of the optoelectronic/photonic functionality of Bi{sub 0.4}Ca{sub 0.6}MnO{sub 3} with semiconductor electronics. As in the case of other perovskite oxides, heteroepitaxy of Bi{sub 0.4}Ca{sub 0.6}MnO{sub 3} on Si requires the use of buffer layers to circumvent the problems associated with the presence of an amorphous native silicon dioxide layer and the reactivity of perovskite oxides with Si at high temperatures. We demonstrate that high quality epitaxial thin films of Bi{sub 0.4}Ca{sub 0.6}MnO{sub 3} can be grown via pulse laser deposition on Si that has been prebuffered with a SrTiO{sub 3} layer via a Motorola molecular beam epitaxy process. The magnitude and dynamics of the photoresponse in these films is comparable to that of Bi{sub 0.4}Ca{sub 0.6}MnO{sub 3} films on oxide substrates.

36 MATERIALS SCIENCE↗

Microstructure and interface control of GaN/MgAl{sub 2}O{sub 4} grown by metalorganic chemical vapor deposition: Substrate-orientation dependence

GaN films with single-crystal and polycrystalline structure were deposited on (111) and (100) MgAl{sub 2}O{sub 4} substrates by metalorganic chemical vapor deposition using a substrate modified by chemical etching and thermal passivation. The interface structure and chemical bonding state of the GaN/MgAl{sub 2}O{sub 4} interface was investigated using angle-resolved x-ray photoelectron spectroscopy and resulting valence band spectra. Our results indicate that the Al{sub 2}O{sub 3} buffered layer induced by thermal passivation of the (111) substrate remains unchanged during GaN deposition, which is primarily responsible for the epitaxial growth of GaN on (111) MgAl{sub 2}O{sub 4} substrate. However, for the as-processed (100) substrate, interfacial reactions take place between the formed MgO-terminated surface and GaN films and GaN with a polycrystalline structure on (100) substrate forms. From the interface engineering viewpoint, the appropriate interface modification will allow control of the interface reaction to obtain high-quality GaN films for future optoelectronic devices.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of quaternary Co{sub 2}Mn{sub 1-x}Cr{sub x}Si Heusler alloy thin films

We present the structural, magnetic, and transport properties of quaternary Co{sub 2}Mn{sub 1-x}Cr{sub x}Si (0 {<=} x {<=} 1) Heusler alloy thin films prepared by DC magnetron sputtering on commercially available glass substrates without any buffer layer. Recent theoretical calculations have shown the compositions to be half-metallic. XRD patterns show the presence of L2{sub 1} structure in the films for x = 0, however, the peaks intensities are not in accordance with the literature. High resolution transmission electron microscopy images of films show granular morphologies, crystalline growth, and an ordered L2{sub 1} structure for x {<=} 0.6. For higher Cr concentrations, secondary phases start to appear in the films. Magnetization measurements as a function of applied magnetic field show that the saturation moments for x {<=} 0.2 follow the Slater-Pauling rule, however, for 0.2 < x {<=} 0.6 the saturation moments fall short of the theoretically predicted values. Transport measurements at room temperature show a monotonic increase in resistivity with increasing Cr concentration. These results are explained in terms of texturing effects, Co-Cr antisite disorder, presence of secondary phases, and the amount of disorder present in the films.

36 MATERIALS SCIENCE↗

Chemical composition and thermal stability of GaAs oxides grown by AFM anodic oxidation for site-controlled growth of InAs quantum dots

We have fabricated GaAs oxides by using atomic force microscope (AFM)-assisted anodic oxidation at various bias voltages, V{sub ox}, and studied their chemical compositions and thermal stabilities. The oxides grown at bias voltages less than 30 V desorbed after standard thermal cleaning in molecular beam epitaxy, while the oxide patterns fabricated at V{sub ox}{>=}40 V survived on the surface. We have further investigated the chemical composition of the oxides by X-ray photoemission spectroscopy. It has been found that the AFM oxides grown at V{sub ox}{approx}10 V predominantly consist of Ga{sub 2}O and GaO, whereas those grown at V{sub ox}{approx}50 V contain a Ga{sub 2}O{sub 3}-component. This result indicates that the better thermal stability of AFM oxides grown at V{sub ox}{>=}40 V can be attributed to the formation of Ga{sub 2}O{sub 3}. We grew a GaAs buffer layer on the oxide nanomasks and obtained nanoholes. After supplying InAs, selective dot nucleation took place in the nanoholes, resulting in successful formation of site-controlled QDs.

36 MATERIALS SCIENCE↗

Growth and Magneto-transport Characterization of Double-doped InGaAs/InAlAs Heterostructures with High Indium Compositions

We investigated double-doped InGaAs/InAlAs heterostructures with high indium compositions. The heterostructures were grown by molecular beam epitaxy on GaAs(001) with metamorphic step-graded buffer layers. The magneto-transport characterization was performed by using Hall-bar devices. We observed non-monotonic magneto-resistance oscillations, which indicate a single two-dimensional electron gas (2DEG) with multiple-subband occupation or a 2DEG bilayer. We also observed weak-antilocalization in all samples, which is an evidence of spin-orbit coupling.

36 MATERIALS SCIENCE↗

Coexistence of type-I and type-II band alignments in antimony-incorporated InAsSb quantum dot nanostructures

Antimony-incorporated InAsSb quantum dots (QDs) are grown by molecular beam epitaxy on GaAs(001) substrates. The QD density increases {approx}7 times while the QD height decreases {approx}50% due to the increase of QD nucleation sites after Sb incorporation into the GaAs buffer layer and into the InAs QDs. These Sb-incorporated InAsSb QDs show red-shift in the photoluminescence (PL) spectrum and large energy separation between confined energy levels. More interestingly, besides the typical type-I QD transition, an additional peak from the recombination at wetting layer interface develops as the excitation laser intensity increases. This peak clearly exhibits type-II characteristics from the measurement of a large blue-shift of the PL peak and a long PL decay time. Finally, the mechanism of the coexistence of type-I and type-II band alignments is discussed.

36 MATERIALS SCIENCE↗

Deposition of stress free c-axis oriented LiNbO{sub 3} thin film grown on (002) ZnO coated Si substrate

C-axis oriented lithium niobate thin films have been deposited on Si substrate using RF sputtering technique. A thin buffer layer of c-axis (002) oriented ZnO on Si substrate has been used as a nucleating layer to promote the growth of (006) oriented LiNbO{sub 3} film. The processing gas composition and pressure are found to be very critical in obtaining stress free LiNbO{sub 3} film having desired (006) orientation. The LiNbO{sub 3} films deposited under unique combination of sputtering pressure (10 mTorr) and argon percentage (80%) in reactive gas (Ar + O{sub 2}) composition become almost stress free having lattice parameter (1.3867 A) close to the bulk value. The observed variation in the structural properties and optical phonon modes observed by Raman spectroscopic studies of the oriented LiNbO{sub 3} thin film with stress has been correlated with growth kinetics.

36 MATERIALS SCIENCE↗

Effect of (Bi, La)(Fe, Zn)O{sub 3} thickness on the microstructure and multiferroic properties of BiFeO{sub 3} thin films

The effect of Bi{sub 0.90}La{sub 0.10}Fe{sub 0.90}Zn{sub 0.10}O{sub 3} (BLFZO) thicknesses on the microstructure and multiferroic properties of BiFeO{sub 3} (BFO) thin films was investigated, and all bilayered thin films were grown on Pt-coated silicon substrates without any buffer layers by a radio frequency sputtering. A (110) orientation is dominant in all the bilayers, and two grain growth modes are identified in these bilayers by using an atomic force microscope, where different grain growth modes significantly affect their leakage behavior. The dielectric constant ({epsilon}{sub r}) of bilayers gradually increases, and magnetic properties were deteriorated with the addition of BLFZO with a higher {epsilon}{sub r} and a weaker magnetic behavior. An enhanced ferroelectric behavior of 2P{sub r} {approx} 116.2 {mu}C/cm{sup 2} and 2E{sub c} {approx} 524 kV/cm could be observed in the BFO/BLFZO bilayered thin film with 80 nm BLFZO layer owing to a higher orientation degree of (110) and an interface coupling together with a lower leakage current density. As a result, electrical properties of BFO could be tailored by modifying the thicknesses of BLFZO.

36 MATERIALS SCIENCE↗

Intense terahertz emission from molecular beam epitaxy-grown GaAs/GaSb(001)

Intense terahertz (THz) electromagnetic wave emission was observed in undoped GaAs thin films deposited on (100) n-GaSb substrates via molecular beam epitaxy. GaAs/n-GaSb heterostructures were found to be viable THz sources having signal amplitude 75% that of bulk p-InAs. The GaAs films were grown by interruption method during the growth initiation and using various metamorphic buffer layers. Reciprocal space maps revealed that the GaAs epilayers are tensile relaxed. Defects at the i-GaAs/n-GaSb interface were confirmed by scanning electron microscope images. Band calculations were performed to infer the depletion region and electric field at the i-GaAs/n-GaSb and the air-GaAs interfaces. However, the resulting band calculations were found to be insufficient to explain the THz emission. The enhanced THz emission is currently attributed to a piezoelectric field induced by incoherent strain and defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗