Search NASA⌕ Search

SEARCH · Search NASA

Results for “cleaning methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Mechanisms of electromagnetic field control on mineral scaling in brackish water reverse osmosis: Combined homogenous and heterogeneous nucleation

Electromagnetic field (EMF) treatment has emerged as a promising approach for scaling control due to its cost-effectiveness, simplicity, and low energy consumption. However, there is a limited understanding of the mechanisms by which applied EMF impacts mineral scaling in reverse osmosis (RO) systems. This has led to inconclusive and varied results and uncertainties regarding its effectiveness. This study elucidates the impacts of EMF on homogenous and heterogeneous nucleation and membrane performance during RO desalination of different feedwaters. Our results reveal that EMF exhibits greater efficacy in treating near-saturated water (SI∼0), especially when coupled with extended hydraulic flushing (HF). For saturated brackish water desalination, heterogeneous scaling predominantly occurs on membrane surfaces, with the effectiveness of EMF in inhibiting scaling primarily attributed to the hydration effect. In supersaturated solutions, EMF promotes bulk precipitation due to the magnetohydrodynamic effect, quickly blocking membrane pores. Thus, when the saturation reaches a certain high level during RO desalination, magnetohydrodynamic EMF effects can accelerate flux decline caused by homogeneous scaling. In conclusion, this work provides an efficient method for predicting EMF efficiency, emphasizing the importance of saturation conditions and HF cleaning duration in determining membrane performance, suggesting these show promise for improving undersaturated or near-saturated feedwater desalination via RO.

42 ENGINEERING↗

Bio-based oxalic acid production in Issatchenkia orientalis enables sustainable rare earth recovery

The growing demand for rare earth elements (REEs) in clean energy and high-tech industries underscores the need for sustainable recovery methods and a reliable supply of processing chemicals. Here, we establish a microbial platform using the acid-tolerant yeast Issatchenkia orientalis SD108 to produce bio-oxalic acid for REE recovery. By introducing an oxaloacetate cleavage pathway and applying metabolic engineering, the engineered strain produces 39.53 g·L -1 oxalic acid at pH 4.0 in fed-batch fermentation. The crude fermentation broth, used without purification, efficiently precipitates over 99% neodymium (Nd), 99% dysprosium (Dy), and 98% lanthanum (La) from individual REE chloride solutions. Recovery from a low-grade ore leachate achieves over 99% total recovery. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) confirm that REE oxalates precipitated with bio-oxalic acid closely resemble those obtained using commercial oxalic acid. Techno-economic analysis (TEA) and life cycle assessment (LCA) further demonstrate that bio-oxalic acid can be produced at a competitive price of $1.79·kg -1 while reducing carbon intensity (CI) by 112% to 63.5% with and without electricity displacement, respectively, relative to the fossil-based benchmark. These results highlight bio-oxalic acid as a green, economically viable alternative to synthetic oxalate for sustainable REE recovery.

59 BASIC BIOLOGICAL SCIENCES↗

Multi-Analytical Investigation of Arsenical Transfer and Remediation on Nineteenth-Century Green Books

Books containing heavy metals, specifically nineteenth-century green arsenical books, have been identified at Northwestern University Libraries, raising health and safety concerns related to handling. Copper acetoarsenite pigments, such as emerald green, were detected on book covers, decorative page edges, labels, and other components using noninvasive analytical techniques including X-ray fluorescence (XRF), Raman spectroscopy, and Fourier-transform infrared (FTIR) spectroscopy. Further examination of selected volumes using synchrotron radiation (SR) techniques revealed pigment migration, degradation, and arsenic transfer to adjacent books. This paper expands on initial findings through two related experiments. The first explored the transfer of arsenic using mechanical friction; Staedtler Mars® white vinyl erasers rubbed on arsenical books generated crumbs which were analyzed via scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM-EDX). Results confirmed the transfer of arsenic, copper, and lead, with decorative page edges being particularly prone to shedding arsenic onto other materials. The second experiment tested remediation methods on a book contaminated by prolonged exposure to an arsenical neighbor. Surface cleaning using erasers and a vacuum removed flecks of pigment but did not eliminate non-chromophoric arsenic as confirmed by SR analyses, which highlights its presence either as a degradation product embedded within the paper or present in the paper as part of its production process. Findings demonstrate the acute toxicity risk posed by arsenical books and support the need for safe handling protocols. However, materials with only trace levels of arsenic embedded during production may pose a lower risk of transfer. Cross contamination beyond prolonged direct contact appears limited. These results highlight critical considerations for library preservation practices and future research on arsenic in historical materials.

arsenic↗

Development of catalyst free carbon nanotubes from coal and waste plastics

DC-Arc technique has been used to synthesize carbon nanotubes from super clean coal, chemically cleaned coal, original coal and waste plastics instead of using high purity graphite in the presence of metal catalysts. The results obtained are compared in terms of yield, purity and type of carbon nanotubes produced from different types of raw material used. In the present study different types of raw materials have been prepared i.e. chemically cleaned coal and super clean coal, and the carbon nanotubes have been synthesized by DC Arc discharge method. Taking in account the present need of utilizing coal as a cheaper raw material for bulk production of carbon nanotubes and utilization of waste plastics (which itself is a potential environmental threat) for production of such an advance material the present work was undertaken. Since the process does not involve presence of any kind of metal catalyst, it avoids the cost intensive process of removal of these metal particles. The residual coal obtained after refining has major fuel potential and can be utilized for various purposes.

01 COAL, LIGNITE, AND PEAT↗

Toward extracting $$\gamma $$ from $$B\rightarrow DK$$ without binning

Abstract $$B^\pm \rightarrow DK^\pm $$ B ± → D K ± transitions are known to provide theoretically clean information about the CKM angle $$\gamma $$ γ , with the most precise available methods exploiting the cascade decay of the neutral D into CP self-conjugate states. Such analyses currently require binning in the D decay Dalitz plot, while a recently proposed method replaces this binning with the truncation of a Fourier series expansion. In this paper, we present a proof of principle of a novel alternative to these two methods, in which no approximations at the level of the data representation are required. In particular, our new strategy makes no assumptions about the amplitude and strong phase variation over the Dalitz plot. This comes at the cost of a degree of ambiguity in the choice of test statistic quantifying the compatibility of the data with a given value of $$\gamma $$ γ , with improved choices of test statistic yielding higher sensitivity. While our current proof-of-principle implementation does not demonstrate optimal sensitivity to $$\gamma $$ γ , its conceptually novel approach opens the door to new strategies for $$\gamma $$ γ extraction. More studies are required to see if these can be competitive with the existing methods.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Linking Ceragenins to Water-Treatment Membranes to Minimize Biofouling

Ceragenins were used to create biofouling resistant water-treatment membranes. Ceragenins are synthetically produced antimicrobial peptide mimics that display broad-spectrum bactericidal activity. While ceragenins have been used on bio-medical devices, use of ceragenins on water-treatment membranes is novel. Biofouling impacts membrane separation processes for many industrial applications such as desalination, waste-water treatment, oil and gas extraction, and power generation. Biofouling results in a loss of permeate flux and increase in energy use. Creation of biofouling resistant membranes will assist in creation of clean water with lower energy usage and energy with lower water usage. Five methods of attaching three different ceragenin molecules were conducted and tested. Biofouling reduction was observed in the majority of the tests, indicating the ceragenins are a viable solution to biofouling on water treatment membranes. Silane direct attachment appears to be the most promising attachment method if a high concentration of CSA-121a is used. Additional refinement of the attachment methods are needed in order to achieve our goal of several log-reduction in biofilm cell density without impacting the membrane flux. Concurrently, biofilm forming bacteria were isolated from source waters relevant for water treatment: wastewater, agricultural drainage, river water, seawater, and brackish groundwater. These isolates can be used for future testing of methods to control biofouling. Once isolated, the ability of the isolates to grow biofilms was tested with high-throughput multiwell methods. Based on these tests, the following species were selected for further testing in tube reactors and CDC reactors: Pseudomonas ssp. (wastewater, agricultural drainage, and Colorado River water), Nocardia coeliaca or Rhodococcus spp. (wastewater), Pseudomonas fluorescens and Hydrogenophaga palleronii (agricultural drainage), Sulfitobacter donghicola, Rhodococcus fascians, Rhodobacter katedanii, and Paracoccus marcusii (seawater), and Sphingopyxis spp. (groundwater). The testing demonstrated the ability of these isolates to be used for biofouling control testing under laboratory conditions. Biofilm forming bacteria were obtained from all the source water samples.

59 BASIC BIOLOGICAL SCIENCES↗

Evolution of Induced Fracture Networks Using Machine Learning Correlation Image Analysis

Enhanced geothermal systems (EGS) can enrich the Nation’s energy portfolio by increasing the amount of renewable baseload power available to the electrical grid. Microseismic activity, due to fluid resource injection and production, provides critical insight into the processes that occur within EGS subsurface fracture networks. To more precisely characterize these fracture networks, we leverage recent advances in deep neural network (DNN) image analysis techniques. Using seismic spectrogram data collected during a meso scale EGS field experiment as image inputs, we developed a new approach to correlate microseismic events. Our results indicate that our chosen DNN is able to estimate the correlation value between highly correlated events (i.e., cross-correlation coefficients greater than approximately 0.7), but has difficulty estimating correlation values between poorly correlated events. In physical systems however, the highly correlated microseismic events are the events of interest. Therefore, this data-driven method has shown potential for improving domestic Energy and Resource Security, advancing the current methods available to image subsurface EGS thermal reservoirs to enhance the availability of clean and reliable energy to the national electric grid.

58 GEOSCIENCES↗

Determination of the spectral absorption of solar radiation by marine stratocumulus clouds from airborne measurements within clouds

Results of the first experimental application of the diffusion domain method to the determination of the spectral similarity parameter, and hence the single scattering albedo, of clouds are presented. The angular distribution of scattered radiation deep within a cloud layer at discrete wavelengths between 0.5 and 2.3 microns was measured by a multiwavelength scanning radiometer. The relative angular distribution of the intensity field at each wavelength was used to determine the similarity parameter of the cloud at that wavelength utilizing the diffusion domain method. Results of the analysis are presented for a 50 km section of clean marine stratocumulus clouds over the coast of California on July 10, 1987. It is concluded that the measured absorption is close to, but persistently larger than, theoretical predictions.

King, Michael D.↗

Mass spectrometer use in a large chamber

The early satellites were somewhat insensitive to contamination produced during the construction and testing phases. The On-Orbit lifetime was such that contamination effects went either unnoticed or unrecognized. With today's On-Orbit lifetimes approaching 10+ years, contamination has become a paramount concern. The scientific payloads have increased in complexity and sensitivity. The ability to clean a contaminated sensor has greatly diminished. This requires better pumping systems and methods for improved monitoring. The conversion from diffusion pumped thermal vacuum chambers to cryo pumped chambers with the use of Misner traps and selective cold traps has reduced contamination. Witness samples supply a record of the condensates that remain after a testing cycle, but impart no knowledge of the contaminant migration during the cycle that may be a month in duration. Due to a customer's request that mass spectrometry be used during the testing of their spacecraft, a consultant was contracted to install a mass spectrometer to determine the feasibility of the instrument. The equipment and methodology described will start with the original system and its evolution to GE's present system.

Chuvala, Tom↗

The role of surface chemical analysis in a study to select replacement processes for TCA vapor degreasing

The role of surface-sensitive chemical analysis (ESCA, AES, and SIMS) in a study to select a process to replace 1, 1, 1-trichloroethane (TCA) vapor degreasing as a steel and aluminum bonding surface preparation method is described. The effort was primarily concerned with spray-in-air cleaning processes involving aqueous alkaline and semi-aqueous cleaners and a contamination sensitive epoxy-to-metal bondline. While all five cleaners tested produced bonding strength results equal to or better than those produced by vapor degreasing, the aqueous alkaline cleaners yielded results which were superior to those produced by the semi-aqueous cleaners. The main reason for the enhanced performance appears to be a silicate layer left behind by the aqueous alkaline cleaners. The silicate layer increases the polarity of the surface and enhances epoxy-to-metal bonding. On the other hand, one of the semi-aqueous cleaners left a nonpolar carbonaceous residue which appeared to have a negative effect on epoxy-to-metal bonding. Differences in cleaning efficiency between cleaners/processes were also identified. These differences in surface chemistry, which were sufficient to affect bonding, were not detected by conventional chemical analysis techniques.

Lesley, Michael W.↗

Techniques for Transition and Surface Temperature Measurements on Projectiles at Hypersonic Velocities- A Status Report

A research effort to advance techniques for determining transition location and measuring surface temperatures on graphite-tipped projectiles in hypersonic flight in a ballistic range is described. Projectiles were launched at muzzle velocities of approx. 4.7 km/sec into air at pressures of 190-570 Torr. Most launches had maximum pitch and yaw angles of 2.5-5 degrees at pressures of 380 Torr and above and 3-6 degrees at pressures of 190-380 Torr. Arcjet-ablated and machined, bead-blasted projectiles were launched; special cleaning techniques had to be developed for the latter class of projectiles. Improved methods of using helium to remove the radiating gas cap around the projectiles at the locations where ICCD (intensified charge coupled device) camera images were taken are described. Two ICCD cameras with a wavelength sensitivity range of 480-870 nm have been used in this program for several years to obtain images. In the last year, a third camera, with a wavelength sensitivity range of 1.5-5 microns [in the infrared (IR)], has been added. ICCD and IR camera images of hemisphere nose and 70 degree sphere-cone nose projectiles at velocities of 4.0-4.7 km/sec are presented. The ICCD images clearly show a region of steep temperature rise indicative of transition from laminar to turbulent flow. Preliminary temperature data for the graphite projectile noses are presented.

Wilder, M. C.↗

Advanced Concepts: Aneutronic Fusion Power and Propulsion

Aneutronic Fusion for In-Space thrust, power. Clean energy & potential nuclear gains. Fusion plant concepts, potential to use advanced fuels. Methods to harness ionic momentum for high Isp thrust plus direct power conversion into electricity will be presented.

Chapman, John J.↗

High-Octane Fuel from Refinery Exhaust Gas: Upgrading Refinery Off-Gas to High-Octane Alkylate

Broad Funding Opportunity Announcement Project: Exelus is developing a method to convert olefins from oil refinery exhaust gas into alkylate, a clean-burning, high-octane component of gasoline. Traditionally, olefins must be separated from exhaust before they can be converted into another source of useful fuel. Exelus’ process uses catalysts that convert the olefin to alkylate without first separating it from the exhaust. The ability to turn up to 50% of exhaust directly into gasoline blends could result in an additional 46 million gallons of gasoline in the U.S. each year.

ARPA-E↗

Preparing Magnesium Alloys for Electron Backscatter Diffraction

Electron Backscatter Diffraction (EBSD) is a powerful characterization tool that is commonly employed to study grain size, grain morphology, crystallographic texture and other important microstructure parameters. However, its relatively low atomic number and propensity to corrode can make it difficult to get high quality EBSD patterns from magnesium specimens. This work will cover some common issues encountered during sample prep and suggestions for avoiding them. Microscope and EBSD detector settings will also be covered, as well as methods for optimizing instrument time. Lastly, comments will be made on how to “clean” and present EBSD data.

36 MATERIALS SCIENCE↗

Recovery of valuable materials from waste liquid crystal display panel

Associated with the rapid development of the information and electronic industry, liquid crystal displays (LCDs) have been increasingly sold as displays. However, during the discarding at their end-of-life stage, significant environmental hazards, impacts on health and a loss of resources may occur, if the scraps are not managed in an appropriate way. In order to improve the efficiency of the recovery of valuable materials from waste LCDs panel in an environmentally sound manner, this study presents a combined recycling technology process on the basis of manual dismantling and chemical treatment of LCDs. Three key processes of this technology have been studied, including the separation of LCD polarizing film by thermal shock method the removal of liquid crystals between the glass substrates by the ultrasonic cleaning, and the recovery of indium metal from glass by dissolution. The results show that valuable materials (e.g. indium) and harmful substances (e.g. liquid crystals) could be efficiently recovered or separated through above-mentioned combined technology. The optimal conditions are: (1) the peak temperature of thermal shock to separate polarizing film, ranges from 230 to 240 deg. C, where pyrolysis could be avoided; (2) the ultrasonic-assisted cleaning was most efficient at a frequency of 40 KHz (P = 40 W) and the exposure of the substrate to industrial detergents for 10 min; and (3) indium separation from glass in a mix of concentrated hydrochloric acid at 38% and nitric acid at 69% (HCl:HNO{sub 3}:H{sub 2}O = 45:5:50, volume ratio). The indium separation process was conducted with an exposure time of 30 min at a constant temperature of 60 deg. C.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Determination of Method Detection Limits for Trace 232-Thorium and 238-Uranium in Copper using Ion Exchange and ICPMS

Based on the MAJORANA DEMONSTRATOR (MJD) simulations task group calculations, the copper used in the inner shield and detector components require purity levels of <0.3 µBq 238 U/kg Cu and <0.3 µBq 232 Th/kg Cu. The MAJORANA Collaboration is endeavoring to achieve this goal by electroforming copper using ultra-clean materials in facilities at PNNL and SURF. In this document, a broadly accepted U.S. Environmental Protection Agency method is used to evaluate an ion exchange technique, developed at PNNL, for determining sensitivity in the assay of copper for trace levels of thorium and uranium. These data indicate that, in all cases, the assay sensitivity and material limits are being met.

Hoppe, Eric W.↗

Oak ridge national laboratory automated clean chemistry for bulk analysis of environmental swipe samples

To shorten the lengthy and costly manual chemical purification procedures, sample preparation methods for mass spectrometry are being automated using commercial-off-the-shelf (COTS) equipment. This addresses a serious need in the nuclear safeguards community to debottleneck the separation of U and Pu in environmental samples—currently performed by overburdened chemists—with a method that allows unattended, overnight operation. In collaboration with Elemental Scientific Inc., the prepFAST-MC2 was designed based on current COTS equipment that was modified for U/Pu separations utilizing Eichrom™ TEVA and UTEVA resins. Initial verification of individual columns yielded small elution volumes with consistent elution profiles and good recovery. Combined column calibration demonstrated ample separation without crosscontamination of the eluent. Automated packing and unpacking of the built-in columns initially showed >15% deviation in resin loading by weight, which can lead to inconsistent separations. Optimization of the packing and unpacking methods led to a reduction in the variability of the packed resin to less than 5% daily. The reproducibility of the automated system was tested with samples containing 30 ng U and 15 pg Pu, which were separated in a series with alternating reagent blanks. These experiments showed very good washout of both the resin and the sample from the columns as evidenced by low blank values. Analysis of the major and minor isotope ratios for U and Pu provided values well within data quality limits for the International Atomic Energy Agency. Additionally, system process blanks spiked with 233U and 244Pu tracers were separated using the automated system after it was moved outside of a clean room and yielded levels equivalent to clean room blanks, confirming that the system can produce high quality results without the need for expensive clean room infrastructure. Comparison of the amount of personnel time necessary for successful manual vs. automated chemical separations showed a significant decrease in hands-on time from 9.8 hours to 35 minutes for seven samples, respectively. This documented time savings and reduced labor translates to a significant cost savings per sample. Overall, the system will enable faster sample reporting times at reduced costs by limiting personnel hours dedicated to the chemical separation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗