Search NASA⌕ Search

SEARCH · Search NASA

Results for “compositional properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

The influence of semiconductive binary Sb{sub 2}S{sub 3}–Yb{sub 3}S{sub 4} system on electrical conductivity property of epoxy composites

The purpose of this study is to develop the semiconductive composites. Semiconducting glass (SG) binary system Sb{sub 2}S{sub 3}–Yb{sub 3}S{sub 4} in mole ratio 1:1 was synthesized and was doped with I{sub 2}. Next, electrically conductive DGEBA-type epoxy resin (ER)/SG-filled composites and epoxy toluene oligomer (ETO) modified epoxy resin-SG filled composites were developed with 3–10 wt. % of fillers and characterized. As a result, the effects of the modifier and amount of semiconductive filler on the electrical properties of commercial epoxy resin were examined. Percolation concentration was 7 wt. % for all composites. For the SG-reinforced composites, the dispersion of the fillers is investigated by X-ray diffraction (XRD) and by scanning electron microscopy (SEM)

36 MATERIALS SCIENCE↗

Mechanical and thermophysical properties of graphite/polyimide composite materials

An on-going program to characterize advanced composites for up to 50,000 hours of exposure to simulated supersonic cruise environments is summarized. Results are presented for up to 25,000 hours of thermal exposure and 10,000 hours of flight simulation at temperatures up to 560K (550 F) with emphasis on HTS/710 graphite/polyimide composite material. Results to date indicate that the maximum use temperature for HTS/710 may be reduced to 505K (450 F) for long-time (1000 hours) application such as the supersonic transport. Preliminary thermophysical properties data for HTS/PMR15 graphite/polyimide were generated. These data include thermal conductivity, thermal expansion, and specific heat from 115K (-252 F) to 590K (600 F) and emittance at room temperature and 590K (600 F). The purpose in generating these data was to validate use of state-of-the-art property measurement methods for advanced graphite fiber reinforced resin matrix composites. Based on results to this point, thermal expansion measurements for composites are most difficult to perform. A high degree of caution in conducting thermal expansion tests and analyzing results is required to produce reliable data.

Rummler, D. R.↗

Phase composition and magnetic properties of niobium-iron codoped TiO{sub 2} nanoparticles synthesized in Ar/O{sub 2} radio-frequency thermal plasma

Nanoparticles of Nb{sup 5+}-Fe{sup 3+} codoped TiO{sub 2} with various Nb{sup 5+} concentrations (Nb/(Ti+Fe+Nb)=0-10.0 at%) and Fe{sup 3+} (Fe/(Ti+Fe+Nb)=0-2.0 at%) were synthesized using Ar/O{sub 2} thermal plasma. Dopant content, chemical valence, phase identification, morphology and magnetic properties were determined using several characterization techniques, including inductively coupled plasma-optical emission spectrometer, X-ray photoelectron spectroscopy, X-ray diffraction, UV-vis diffuse reflectance spectrometer, field-emission scanning electron microscopy, transmission electron microscopy and SQUID commercial instrument. The XRD revealed that all the plasma-synthesized powders were exclusively composed of anatase as major phase and rutile. The rutile weight fraction was increased by the substitution of Fe{sup 3+} for Ti{sup 4+} whereas it was reduced by the Nb{sup 5+} doping. The plasma-synthesized Nb{sup 5+}-Fe{sup 3+} codoped TiO{sub 2} powders had intrinsic magnetic properties of strongly paramagnetic and feebly ferromagnetic at room temperature. The ferromagnetic properties gradually deteriorated as the Fe{sup 3+} concentration was decreased, suggesting that the ferromagnetism was predominated by the phase composition as a carrier-mediated exchange. - Graphical Abstract: Spherical nanoparticles of Nb{sup 5+}-Fe{sup 3+} codoped TiO{sub 2} were synthesized using Ar/O{sub 2} thermal plasma. The plasma-synthesized powders were composed of anatase as major phase and rutile. Rutile weight fraction was increased by Fe{sup 3+} addition but was reduced by Nb{sup 5+} doping. Strongly paramagnetic and feebly ferromagnetic properties are of intrinsic nature. Ferromagnetic properties gradually deteriorated as Fe{sup 3+} concentration was increased. Highlights: > Nanoparticles of Nb{sup 5+}-Fe{sup 3+} codoped TiO{sub 2} were synthesized using Ar/O{sub 2} thermal plasma. > The plasma-synthesized powders were composed of anatase as major phase and rutile. > Rutile weight fraction was increased by Fe{sup 3+} addition but was reduced by Nb{sup 5+} doping. > Strongly paramagnetic and feebly ferromagnetic properties are of intrinsic nature. > Ferromagnetic properties gradually deteriorated as Fe{sup 3+} concentration was increased.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Composition on Mechanical Properties and Conductivity of the Dual-Ion Conductor Na 1+ x Mn x /2 Zr 2– x /2 (PO 4 ) 3 for Solid-State Batteries

Here we report the dependence of mechanical properties and ionic conductivity of the Na 1+ x Mn x /2 Zr 2– x /2 (PO 4 ) 3 (designated as NMZP) ionic conductor on its composition (with x = 0.5, 1.0, 1.5, and 2.0). Local mechanics was studied by instrumented nanoindentation, and the properties of interest included the elastic modulus, hardness, and fracture toughness. Overall, the material becomes more compliant and soft with the increase in the Na content. The elastic modulus reduces from 120 to 80 GPa, and nanoindentation hardness reduces from 7.8 to 4.2 GPa when x changes from 0.5 to 2.0. The relationship with fracture toughness ( K C ) is highly nonlinear: fracture toughness first decreases and then increases with the increase in the sodium content, reaching a maximum value of 0.89 MPa × m 1/2 at x = 2.0. Such a relationship was found to correlate with the formation of a glassy phase in NMZP at intermediate Na concentration. The maximum ionic conductivity coincides with the maximum fracture toughness in this material.

25 ENERGY STORAGE↗

On the elastic properties of fiber composite laminates with statistically dispersed fiber and ply orientations.

Structural application of advanced composite filamentary materials requires lamination of the basic orthotropic plies into angle-ply laminates. This article reviews the effect on elastic properties of orientation dispersion. The conventional constitutive relations are recast in a homologous form to account for uniform orientation dispersion by addition of a single parameter. Graphical results are presented to show the behavior of the most important advanced composite materials. The results are directly useful for estimating effects of manufacturing inaccuracy and for design of partially oriented reinforced structures.

Robinson, E. Y.↗

Prediction of Elastic Properties for Curved Fiber Polymer Composites

The objective of this paper is to study the effect of fiber curvature on the elastic properties of a long-fiber composite. The study was carried out using a unit-cell homogenization approach and micromechanical modeling. In the first approach, a unit-cell with a fiber bundle was defined and used in the analysis. Appropriate boundary conditions were prescribed to extract the elastic stiffness components. The second approach made use of the Eshelby-Mori-Tanaka model to compute the stiffness of the aligned fiber composite. Fiber curvature was then accounted for through the variation of fiber orientation within a prescribed range that corresponds to a given degree of fiber curvature. It was found that curved fibers significantly affect the composite properties since they lead to a significant stiffness reduction in the longitudinal direction while relatively small increase in stiffness is achieved in the transverse direction in the plane containing the fiber tow.

36 MATERIALS SCIENCE↗

Decoupling the effects of texture and composition on magnetic properties of Fe-Si sheet processed by shear deformation

Soft magnetic Fe-Si alloys (electrical steels) possess exceptional functional properties such as high permeability, low coercivity, and low core loss, which generally improve with increasing Si content in the alloy. However, Fe-Si alloys containing > 3.5 wt% Si are also characterized by prohibitively low workability and poor ductility that have prevented their efficient commercial production in sheet form by rolling. This has limited their use for improving efficiency of motors and transformers. In this study, hybrid cutting-extrusion (HCE) is used as a single-step thermomechanical processing method to produce continuous Fe-Si alloy sheet with high Si compositions of 4 wt% to 6.5 wt%. HCE sheet is shown to have a homogeneous annealed grain structure and simple-shear crystallographic textures. By controlling the HCE deformation path, varied crystallographic shear textures are created in the sheet. Quasi-static magnetic properties of the HCE sheet are evaluated to decouple the effects of sheet texture and Si composition on resultant permeability and coercivity properties. The results suggest that HCE, with suitable process scaling, is a viable route for production of high-Si content electrical steel sheet for next-generation motors and transformers.

36 MATERIALS SCIENCE↗

Microstructural, dielectric and magnetic properties of multiferroic composite system barium strontium titanate – nickel cobalt ferrite

Multiferroic composites (1-x) Ba{sub 0.95}Sr{sub 0.05}TiO{sub 3} + (x) Ni{sub 0.8}Co{sub 0.2}Fe{sub 2}O{sub 4} (where x = 0.1, 0.2, 0.3, 0.4) has been prepared by solid state reaction method. X-ray diffraction analysis of the composite samples confirmed the presence of both barium strontium titanate (BST) and nickel cobalt ferrite (NCF) phases. FESEM images indicated the well dispersion of NCF grains among BST grains. Dielectric constant and loss of the composite samples decreases with increase in frequency following Maxwell-Wagner relaxation mechanism. Composite sample with highest ferrite content possesses highest values of remanent and saturation magnetization.

36 MATERIALS SCIENCE↗

Hoop Tensile Properties of Ceramic Matrix Composite Cylinders

Tensile stress-strain properties in the hoop direction were obtained for 100-mm diameter SiC/SiC ceramic matrix composite cylinders using ring specimens machined form the cylinder ends. The cylinders were fabricated from 2D balanced SiC fabric with several material variants, including wall thickness (6,8, and 12 plies), SiC fiber type (Sylramic, Sylramic-iBN, Hi-Nicalon, and Hi-Nicalon S), fiber sizing type, and matrix type (full CVI SiC, and partial CVI SiC plus slurry cast + melt-infiltrated SiC-Si). Fiber ply splices existed in all the hoops. Tensile hoop measurements are made at room temperature and 1200 C using hydrostatic ring test facilities. The failure mode of the hoops, determined through microstructural examination, is presented. The hoop properties are compared with in-plane data measured on flat panels using same material variants, but containing no splices.

Verrilli, Michael J.↗

Properties of Geopolymer Composites Reinforced with Basalt Chopped Strand Mat or Woven Fabric

Geopolymers or polysialates are inorganic polymeric, ceramic‐like materials composed of alumina, silica, and alkali metal oxides that can be made without any thermal treatment. Additions of reinforcing phases vastly improve the mechanical properties and high‐temperature stability of the geopolymer. The processing and mechanical properties of both chopped strand mat as well as 2‐D woven fabric‐reinforced potassium geopolymer composites have been evaluated. Hand lay‐up and hydraulic press processing methods were used to produce composite panels. The room‐temperature tensile and flexural strength of chopped strand mat composites was 21.0 ± 3.1 and 31.7 ± 4.4 MP a, respectively, while those of basalt weave‐reinforced geopolymer composites reached 40.0 ± 5.9 and 45.2 ± 9.3 MP a, respectively. Composite microstructures were examined using optical microscopy as well as scanning electron microscopy ( SEM ). Mass, volume, and porosity fractions were also determined. The effect of high‐temperature treatments at 25°C, 300°C, 600°C, and 800°C were analyzed. Finally, Weibull statistical analysis was performed, which showed an increase in reliability when a reinforcement phase was added to K‐geopolymer.

Ribero, Daniel↗

Iron oxide nanoparticles: the Influence of synthesis method and size on composition and magnetic properties

Iron oxide nanoparticles with mean diameter ranging from 7 to 20 nm were synthesized using two routes: the precipitation method in controlled atmosphere and a reduction–precipitation method under air, in some cases followed by a hydrothermal treatment. The smallest nanoparticles were obtained by the reduction–precipitation method. In order to establish the composition of the iron oxide nanoparticles and its relation with size, the morphological, structural and magnetic properties of the prepared samples were investigated using X-ray diffraction, transmission electron microscopy, Mössbauer spectroscopy and SQUID magnetometry. The results allow to conclude that the nanoparticles can be essentially described as Fe 3–x O₄, x decreasing with the particle size increase. The composition and magnetic behavior of the synthesized iron oxide nanoparticles are directly related with their size. The overall results are compatible with a core@shell structure model, where a magnetite core is surrounded by an oxidized magnetite layer (labeled as maghemite), the magnetite core dimension depending on the average particle size. - Graphical abstract: TEM images and Mössbauer spectroscopy spectra of Fe 3–x O₄ samples with different sizes. Highlights: • Fe 3–x O₄ nanoparticles with a mean size between 7 and 20 nm were synthesized. • The smallest nanoparticles were obtained by a reduction precipitation method, under air. • The increase of particles size was succeeded using a hydrothermal treatment at 150 °C. • The magnetic properties of the nanoparticles are directly related with their size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and magnetic heterogeneities, phase transitions, and magnetoresistance and magnetoresonance properties of the composition ceramic La{sub 0.7}Pb{sub 0.3-x}Sn{sub x}MnO{sub 3}

The La{sub 0.7}Pb{sub 0.3-x}Sn{sub x}MnO{sub 3} composition ceramic is studied by X-ray diffraction, resistive, magnetic, electron-microscopic, magnetoresistance, and NMR ({sup 55}Mn, {sup 139}La) methods. The substitution of tin for lead results in structural phase separation into the basic perovskite (R3-bar c) and spinell (Fd3m), phases: La{sub 0.7}Pb{sub 0.3-x}Sn{sub x}MnO{sub 3} {yields} La{sub 0.7-x}Pb{sub 0.3-x}MnO{sub 3} + 0.5xLa{sub 2}Sn{sub 2}O{sub 7}. Changes in the lattice parameter of the basic perovskite R3-bar c structure, the electrical resistivity, and the magnetic and magnetoresistance properties are caused by changes in the composition and content of a conducting perovskite ferromagnetic phase, the Mn{sup 3+}/Mn{sup 4+} ratio, and the imperfection of vacancy and cluster types. An in-plane nanostructured cluster is formed by Mn{sup 2+} ions located in distorted A-positions. The detected anomalous magnetic hysteresis is induced by the appearance of a unidirectional exchange anisotropy at the boundary of an in-plane antifer-romagnetic cluster coherently joined with a ferromagnetic matrix structure. The broad asymmetric NMR spectra of {sup 55}Mn and {sup 139}La indicate a high-frequency Mn{sup 3+} {r_reversible} Mn{sup 4+} superexchange and a nonuniform distribution of ions and defects. The constructed phase diagram characterizes a strong relation between the magnetic and transport properties in rare-earth manganites.

36 MATERIALS SCIENCE↗

Nano- to microscale three-dimensional morphology relevant to transport properties in reactive porous composite paint films

The quantitative evaluation of the three-dimensional (3D) morphology of porous composite materials is important for understanding mass transport phenomena, which further impact their functionalities and durability. Reactive porous paint materials are composites in nature and widely used in arts and technological applications. In artistic oil paintings, ambient moisture and water and organic solvents used in conservation treatments are known to trigger multiple physical and chemical degradation processes; however, there is no complete physical model that can quantitatively describe their transport in the paint films. In the present study, model oil paints with lead white (2PbCO 3 ·Pb(OH) 2 ) and zinc white (ZnO) pigments, which are frequently found in artistic oil paintings and are associated with the widespread heavy metal soap deterioration, were studied using synchrotron X-ray nano-tomography and unilateral nuclear magnetic resonance. This study aims to establish a relationship among the paints’ compositions, the 3D morphological properties and degradation. This connection is crucial for establishing reliable models that can predict transport properties of solvents used in conservation treatments and of species involved in deterioration reactions, such as soap formation.

36 MATERIALS SCIENCE↗

Strain rate effects on mechanical properties of fiber composites, part 3

An experimental investigation was conducted to determine the strain rate effects in fiber composites. Unidirectional composite specimens of boron/epoxy, graphite/epoxy, S-glass/epoxy and Kevlar/epoxy were tested to determine longitudinal, transverse and intralaminar (in-plane) shear properties. In the Longitudinal direction the Kevlar/epoxy shows a definite increase in both modulus and strength with strain rate. In the transverse direction, a general trend toward higher strength with strain rate is noticed. The intralaminar shear moduli and strengths of boron/epoxy and graphite/epoxy show a definite rise with strain rate.

Daniel, I. M.↗

Properties of two composite materials made of toughened epoxy resin and high-strain graphite fiber

Results are presented from an experimental evaluation of IM7/8551-7 and IM6/18081, two new toughened epoxy resin, high strain graphite fiber composite materials. Data include ply-level strengths and moduli, notched tension and compression strengths and compression-after-impact assessments. The measured properties are compared with those of other graphite-epoxy materials.

Dow, Marvin B.↗

Development of polyphenylquinoxaline graphite composites

Six polyphenylquinoxalines (PPQ) containing pendant cyano (CN) groups were synthesized. The polymers were characterized in terms of inherent viscosity, glass transition temperature, softening temperature and weight loss due to aging in air at 316 C (600 F). The potential for crosslinking PPQs by trimerization of pendant CN groups was investigated. A polymer derived from 1 mole 3,3,4,4 -tetraaminobenzophenone, .2 mole p-bis(p -cyanophenoxyphenylglyoxalyl)benzene and .8 mole p-bis(phenylglyoxalyl)benzene was selected for more extensive characterization in HM-S graphite fiber-reinforced composites. Mechanical properties were determined using composites made from HM-S fiber and polymer and composites made from HM-S fiber, polymer and a potential CN group trimerization catalyst. Composite mechanical properties, inter-laminar shear strength and flexure properties, were determined over the temperature range of +21 C to 316 C.

Shdo, J. D.↗

High strain rate properties of unidirectional composites, part 1

Experimental methods were developed for testing and characterization of composite materials at strain rates ranging from quasi-static to over 500 s(sup -1). Three materials were characterized, two graphite/epoxies and a graphite/S-glass/epoxy. Properties were obtained by testing thin rings 10.16 cm (4 in.) in diameter, 2.54 cm (1 in.) wide, and six to eight plies thick under internal pressure. Unidirectional 0 degree, 90 degree, and 10 degree off-axis rings were tested to obtain longitudinal, transverse, and in-plane shear properties. In the dynamic tests internal pressure was applied explosively through a liquid and the pressure was measured with a calibrated steel ring. Strains in the calibration and specimen rings were recorded with a digital processing oscilloscope. The data were processed and the equation of motion solved numerically by the mini-computer attached to the oscilloscope. Results were obtained and plotted in the form of dynamic stress-strain curves. Longitudinal properties which are governed by the fibers do not vary much with strain rate with only a moderate (up to 20 percent) increase in modulus. Transverse modulus and strength increase sharply with strain rate reaching values up to three times the static values. The in-plane shear modulus and shear strength increase noticeably with strain rate by up to approximately 65 percent. In all cases ultimate strains do not vary significantly with strain rates.

Daniel, I. M.↗