Search NASA⌕ Search

SEARCH · Search NASA

Results for “data classification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Modeling the effects of various radiant transfers in mountainous terrain on sensor response

A model is developed for the study of remote sensing spectral data problems encountered in mountainous terrain, where slope orientation with respect to sources of incident radiation must be considered for accurate classification of multispectral data. The model simulates the effects of solar, sky and adjacent slope irradiance fluxes and the bidirectional reflectance properties of the target surface on sensor response for various slope orientations. The errors associated with two practical techniques used to account for topographic effects on sensor response were evaluated in light of the model, and it was found that the simple cosine correction of the direct solar source showed reflectance errors greater than 11% while the technique considering both direct solar and diffuse sky sources was 50% more accurate.

Kimes, D. S.↗

Source Data Impacts on Epistemic Uncertainty for Launch Vehicle Fault Tree Models

Launch vehicle systems are designed and developed using both heritage and new hardware. Design modifications to the heritage hardware to fit new functional system requirements can impact the applicability of heritage reliability data. Risk estimates for newly designed systems must be developed from generic data sources such as commercially available reliability databases using reliability prediction methodologies, such as those addressed in MIL-HDBK-217F. Failure estimates must be converted from the generic environment to the specific operating environment of the system in which it is used. In addition, some qualification of applicability for the data source to the current system should be made. Characterizing data applicability under these circumstances is crucial to developing model estimations that support confident decisions on design changes and trade studies. This paper will demonstrate a data-source applicability classification method for suggesting epistemic component uncertainty to a target vehicle based on the source and operating environment of the originating data. The source applicability is determined using heuristic guidelines while translation of operating environments is accomplished by applying statistical methods to MIL-HDK-217F tables. The paper will provide one example for assigning environmental factors uncertainty when translating between operating environments for the microelectronic part-type components. The heuristic guidelines will be followed by uncertainty-importance routines to assess the need for more applicable data to reduce model uncertainty.

Al Hassan, Mohammad↗

Application of remotely sensed multispectral data to automated analysis of marshland vegetation. Inference to the location of breeding habitats of the salt marsh mosquito (Aedes Sollicitans)

The techniques used for the automated classification of marshland vegetation and for the color-coded display of remotely acquired data to facilitate the control of mosquito breeding are presented. A multispectral scanner system and its mode of operation are described, and the computer processing techniques are discussed. The procedures for the selection of calibration sites are explained. Three methods for displaying color-coded classification data are presented.

Cibula, W. G.↗

Reduced electron exposure for energy-dispersive spectroscopy using dynamic sampling

Analytical electron microscopy and spectroscopy of biological specimens, polymers, and other beam sensitive materials has been a challenging area due to irradiation damage. There is a pressing need to develop novel imaging and spectroscopic imaging methods that will minimize such sample damage as well as reduce the data acquisition time. The latter is useful for high-throughput analysis of materials structure and chemistry. Here, in this work, we present a novel machine learning based method for dynamic sparse sampling of EDS data using a scanning electron microscope. Our method, based on the supervised learning approach for dynamic sampling algorithm and neural networks based classification of EDS data, allows a dramatic reduction in the total sampling of up to 90%, while maintaining the fidelity of the reconstructed elemental maps and spectroscopic data. In conclusion, we believe this approach will enable imaging and elemental mapping of materials that would otherwise be inaccessible to these analysis techniques.

36 MATERIALS SCIENCE↗

Invasion in the Niger Delta: Remote Sensing of Mangrove Conversion to Invasive Nypa fruticans from 2015-2020

Invasive species are a leading threat to biodiversity worldwide. Nypa palm ( Nypa fruticans ) has emerged as the predominant invasive species in the Niger Delta region of Nigeria. While endemic mangroves have high rates of carbon sequestration, stabilize coastlines, and protect biodiversity, Nypa does not provide these services outside its native region of Southeast Asia. Oil exploration and urbanization in this region also exacerbates mangrove loss and Nypa spread. As Nypa is difficult to distinguish from endemic mangrove species in remotely sensed data, estimates of mangrove and ecosystem services losses in Nigeria are highly uncertain. Here, we analyze multisensor satellite data with machine learning to quantify the rapid expansion of Nypa from 2015-2020 in Nigeria. Using Landsat imagery and random forest classification, we quantify total potential Nypa extent in Nigeria in 2019. We then produced a Nypa extent map using iterative combinations of Sentinel-1 SAR, Sentinel-2 MSI, and ALOS PALSAR. Random forest classifications using SAR data from ALOS and Sentinel-1 were best suited for mapping Nypa extent with similar accuracies (78% and 75% respectively). Based on data availability and accuracy, we focused our change analysis on Sentinel-1 SAR. Our results show ~28,000 ha of mangroves were converted to Nypa in Nigeria by 2020 and covered a larger extent than endemic mangroves, compounding the effect of the existing degradation and deforestation in the region. We also compared forest height and complexity estimates from GEDI (Global Ecosystem Dynamics Investigation) LiDAR to further distinguish between endemic mangroves and Nypa in three dimensions. Nypa structural variability, measured by top-of-canopy height, vegetation cover, plant area index, and foliage height diversity, was lower than that of mangroves. At current rates of Nypa expansion, the entire area of study would be invaded by Nypa by 2028, with potentially detrimental consequences to the ecosystem services provided by mangroves.

GEE↗

Gaussian maximum likelihood and contextual classification algorithms for multicrop classification experiments using thematic mapper and multispectral scanner sensor data

The paper presents the results of a four-factor two-level analysis of a variance experiment designed to evaluate the combined effect of the improved quality of remote-sensor data and the use of context by the classifier on classification accuracy. The improvement achievable by using the context via relaxation techniques is significantly smaller than that provided by an increase of the radiometric resolution of the sensor from 6 to 8 bits per sample (the relative increase in radiometric resolution of TM relative to MSS). It is almost equal to that achievable by an increase in the spectral coverage as provided by TM relative to MSS.

Di Zenzo, Silvano↗

Integrated resource inventory for southcentral Alaska (INTRISCA)

The Integrated Resource Inventory for Southcentral Alaska (INTRISCA) Project comprised an integrated set of activities related to the land use planning and resource management requirements of the participating agencies within the southcentral region of Alaska. One subproject involved generating a region-wide land cover inventory of use to all participating agencies. Toward this end, participants first obtained a broad overview of the entire region and identified reasonable expectations of a LANDSAT-based land cover inventory through evaluation of an earlier classification generated during the Alaska Water Level B Study. Classification of more recent LANDSAT data was then undertaken by INTRISCA participants. The latter classification produced a land cover data set that was more specifically related to individual agency needs, concurrently providing a comprehensive training experience for Alaska agency personnel. Other subprojects employed multi-level analysis techniques ranging from refinement of the region-wide classification and photointerpretation, to digital edge enhancement and integration of land cover data into a geographic information system (GIS).

Burns, T.↗

A hybrid architecture for the implementation of the Athena neural net model

The implementation of an earlier introduced neural net model for pattern classification is considered. Data flow principles are employed in the development of a machine that efficiently implements the model and can be useful for real time classification tasks. Further enhancement with optical computing structures is also considered.

Koutsougeras, C.↗

Repository scale classification and decomposition of tandem mass spectral data

Various studies have shown associations between molecular features and phenotypes of biological samples. These studies, however, focus on a single phenotype per study and are not applicable to repository scale metabolomics data. Here we report MetSummarizer, a method for predicting (i) the biological phenotypes of environmental and host-oriented samples, and (ii) the raw ingredient composition of complex mixtures. We show that the aggregation of various metabolomic datasets can improve the accuracy of predictions. Since these datasets have been collected using different standards at various laboratories, in order to get unbiased results it is crucial to detect and discard standard-specific features during the classification step. We further report high accuracy in prediction of the raw ingredient composition of complex foods from the Global Foodomics Project.

59 BASIC BIOLOGICAL SCIENCES↗

Adaptable Monitoring Package Development and Deployment: Lessons Learned for Integrated Instrumentation at Marine Energy Sites

Integrated instrumentation packages are an attractive option for environmental and ecological monitoring at marine energy sites, as they can support a range of sensors in a form factor compact enough for the operational constraints posed by energetic waves and currents. Here we present details of the architecture and performance for one such system—the Adaptable Monitoring Package—which supports active acoustic, passive acoustic, and optical sensing to quantify the physical environment and animal presence at marine energy sites. we describe cabled and autonomous deployments and contrast the relatively limited system capabilities in an autonomous operating mode with more expansive capabilities, including real-time data processing, afforded by shore power or in situ power harvesting from waves. Across these deployments, we describe sensor performance, outcomes for biological target classification algorithms using data from multibeam sonars and optical cameras, and the effectiveness of measures to limit biofouling and corrosion. On the basis of these experiences, we discuss the demonstrated requirements for integrated instrumentation, possible operational concepts for monitoring the environmental and ecological effects of marine energy converters using such systems, and the engineering trade-offs inherent in their development. Overall, we find that integrated instrumentation can provide powerful capabilities for observing rare events, managing the volume of data collected, and mitigating potential bias to marine animal behavior. These capabilities may be as relevant to the broader oceanographic community as they are to the emerging marine energy sector.

16 TIDAL AND WAVE POWER↗

Implementation and evaluation of ILLIAC 4 algorithms for multispectral image processing

Data concerning a multidisciplinary and multi-organizational effort to implement multispectral data analysis algorithms on a revolutionary computer, the Illiac 4, are reported. The effectiveness and efficiency of implementing the digital multispectral data analysis techniques for producing useful land use classifications from satellite collected data were demonstrated.

Swain, P. H.↗

Sea-ice software: ICEMAN

An oceanographer's work bench which provides tools for ice data display, ice type classification, global and local ice motion analysis, and data enhancing is presented. The user interface; ice texture analysis; and ice motion analysis are described.

Lee, Meemong↗

EE-SMOTE: An oversampling method in conjunction with information entropy for imbalanced learning

Imbalanced learning attracts great attention in various research fields. Existing literature-reported methodologies in imbalanced learning have shown drawbacks including over-generation or noisy/wrong samples generations. This paper presents EE-SMOTE, an oversampling technique based on information entropy, to support the imbalance classifications. Specifically, we propose a metric, Eigen-Entropy (EE), to identify homogenous samples from minority classes for oversampling technique, specifically, SMOTE to reach data balances for classification. Experiments on public dataset and real-world datasets demonstrate the efficacy and effectiveness of the proposed EE-SMOTE in imbalanced learning.

Huang, Jiajing↗

An Initial Analysis of LANDSAT-4 Thematic Mapper Data for the Discrimination of Agricultural, Forested Wetland, and Urban Land Covers

An initial analysis of LANDSAT 4 Thematic Mapper (TM) data for the discrimination of agricultural, forested wetland, and urban land covers is conducted using a scene of data collected over Arkansas and Tennessee. A classification of agricultural lands derived from multitemporal LANDSAT Multispectral Scanner (MSS) data is compared with a classification of TM data for the same area. Results from this comparative analysis show that the multitemporal MSS classification produced an overall accuracy of 80.91% while the TM classification yields an overall classification accuracy of 97.06% correct.

Quattrochi, D. A.↗

A convolutional neural network-based screening tool for X-ray serial crystallography

A new tool is introduced for screening macromolecular X-ray crystallography diffraction images produced at an X-ray free-electron laser light source. Based on a data-driven deep learning approach, the proposed tool executes a convolutional neural network to detect Bragg spots. Automatic image processing algorithms described can enable the classification of large data sets, acquired under realistic conditions consisting of noisy data with experimental artifacts. Outcomes are compared for different data regimes, including samples from multiple instruments and differing amounts of training data for neural network optimization.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Evaluation of SLAR and thematic mapper MSS data for forest cover mapping using computer-aided analysis techniques

Training and test data sets for CAM1S from NS-001 MSS data for two dates (geometrically adjusted to 30 meter resolution) were used to evaluate wavelength band. Two sets of tapes containing digitized HH and HV polarization data were obtained. Because the SAR data on the 9 track tapes contained no meaningful data, the 7 track tapes were copied onto 9 track tapes at LARS. The LARSYS programs were modified and a program was written to reformat the digitized SAR data into a LARSYS format. The radar imagery is being qualitatively interpreted. Results are to be used to identify possible cover types, to produce a classification map to aid in the numerical evaluation classification of radar data, and to develop an interpretation key for radar imagery. The four spatial resolution data sets were analyzed. A program was developed to reduce the spatial distortions resulting from variable viewing distance, and geometrically adjusted data sets were generated. A flowchart of steps taken to geometrically adjust a data set from the NS-001 scanner is presented.

Hoffer, R. M.↗

Data-driven model construction for industrial asset decision boundary classification

In some embodiments, a system model construction platform may receive, from a system node data store, system node data associated with an industrial asset. The system model construction platform may automatically construct a data-driven, dynamic system model for the industrial asset based on the received system node data. A synthetic attack platform may then inject at least one synthetic attack into the data-driven, dynamic system model to create, for each of a plurality of monitoring nodes, a series of synthetic attack monitoring node values over time that represent simulated attacked operation of the industrial asset. The synthetic attack platform may store, in a synthetic attack space data source, the series of synthetic attack monitoring node values over time that represent simulated attacked operation of the industrial asset. This information may then be used, for example, along with normal operational data to construct a threat detection model for the industrial asset.

97 MATHEMATICS AND COMPUTING↗

Evaluation of Advanced Signal Processing Techniques to Improve Detection and Identification of Embedded Defects

By the end of 1996, 109 Nuclear Power Plants were operating in the United States, producing 22% of the Nation’s electricity [1]. At present, more than two thirds of these power plants are more than 40 years old. The purpose of the U.S. Department of Energy Office of Nuclear Energy’s Light Water Reactor Sustainability (LWRS) Program is to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the operating lifetimes of nuclear power plants (NPPs) beyond 60 years [2]. The most important safety structures in an NPP are constructed of concrete. The structures generally do not allow for destructive evaluation and access is limited to one side of the concrete element. Therefore, there is a need for techniques and technologies that can assess the internal health of complex, reinforced concrete structures nondestructively. Previously, we documented the challenges associated with Non-Destructive Evaluation (NDE) of thick, reinforced concrete sections and prioritized conceptual designs of specimens that could be fabricated to represent NPP concrete structures [3]. Consequently, a 7 feet tall, by 7 feet wide, by 3 feet and 4-inch-thick concrete specimen was constructed with 2.257-inch-and 1-inch-diameter rebar every 6 to 12 inches. In addition, defects were embedded the specimen to assess the performance of existing and future NDE techniques. The defects were designed to give a mix of realistic and controlled defects for assessment of the necessary measures needed to overcome the challenges with more heavily reinforced concrete structures. Information on the embedded defects is documented in [4]. We also documented the superiority of Frequency Banded Decomposition (FBD) Synthetic Aperture Focusing Technique (SAFT) over conventional SAFT when probing defects under deep concrete cover. Improvements include seeing an intensity corresponding to a defect that is either not visible at all in regular, full frequency content SAFT, or an improvement in contrast over conventional SAFT reconstructed images. This report documents our efforts in four fronts: 1) Comparative study between traditional SAFT and FBD SAFT for concrete specimen with and without Alkali-Silica Reaction (ASR) damage, 2) improvement of our Model-Based Iterative Reconstruction (MBIR) for thick reinforced concrete [5], 3) development of a universal framework for sharing, reconstruction, and visualization of ultrasound NDE datasets, and 4) application of machine learning techniques for automated detection of ASR inside concrete. Our comparative study between FBD and traditional SAFT reconstruction images shows a clear difference between images of ASR and non-ASR specimens. In particular, the left first harmonic shows an increased contrast and sensitivity to ASR damage. For MBIR, we show the superiority of model-based techniques over delay and sum techniques such as SAFT. Improvements include elimination of artifacts caused by direct arrival signals, and increased contrast and Signal to Noise Ratio. For the universal framework, we document a format for data storage based on the HDF5 file format, and also propose a modular Graphic User Interface (GUI) for easy customization of data conversion, reconstruction, and visualization routines. Finally, two techniques for ASR automated detection are presented. The first technique is based on an analysis of the frequency content using Hilbert Transform Indicator (HTI) and the second technique employees Artificial Neural Network (ANN) techniques for training and classification of ultrasound data as ASR or non-ASR damaged classes. The ANN technique shows great potential with classification accuracy above 95%. These approaches are extensible to the detection of additional reinforced, thick concrete defects and damage.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗