Search NASA⌕ Search

SEARCH · Search NASA

Results for “data depth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Predicting melt pool depth and grain length using multiple signatures from in-situ single camera two-wavelength imaging pyrometry for laser powder bed fusion

In laser powder bed fusion (LPBF), the in-situ process signatures are known to have a direct correlation with the microstructural properties of the solidified melt pool (MP). It is known that the MP cooling and heating rates, and laser processing parameters can critically determine the grain structure and thereby affect the part properties. The objective of this work is to study the feasibility of using in-process, high-speed imaging pyrometry for evaluating the solidified MP properties “below” the surface, such as depth and microstructural properties. To accomplish this, we employ an in-house single camera-based two-wavelength imaging pyrometry (STWIP) system for monitoring the printing of single-scan tracks with Inconel 718 on a commercial LPBF printer (EOS M290). Further, the lab designed STWIP system is a coaxial high-speed (>10,000 fps) imaging system capable of monitoring MP temperature, morphology, and intensity profiles. The temperature measurements from STWIP are emissivity independent. The STWIP measured MP signatures of the printed tracks are correlated with the ex-situ microscopy characterized MP depth and the average grain lengths. From the data analysis, using support vector machine (SVM)-based regression models, we found that the MP temperature signatures are crucial for an accurate prediction of MP depth and the grain length, thus validating the novelty and necessity of the developed in-situ monitoring methods and analysis.

36 MATERIALS SCIENCE↗

Soil Water Content (m3 m-3) from Australia, May 2014 - March 2017

Hourly data processed to monthly. Data collected from Cosmic Neutron Probes at variable depth averaging 28 cm that was interpolated to near-surface (0-10 cm). Site located at latitude -17.12 deg N, longitude 145.63 deg E. Data was downloaded from COSMOS data portal and is publicly available. Data from this site is referenced as Australia (1) in Table 1 and Figure 4 of Solander et al., 2020, The pan-tropical soil moisture response to El Nino, Hydrol. Earth Syst. Sci., in press.

54 ENVIRONMENTAL SCIENCES↗

Soil Water Content (m3 m-3) from Australia, June 2011 - December 2016

Hourly data processed to monthly. Data collected from Cosmic Neutron Probes at variable depth averaging 38 cm that was interpolated to near-surface (0-10 cm). Site located at latitude -14.16 deg N, longitude 131.39 deg E. Data was downloaded from the The COsmic-ray Soil Moisture Observing System (COSMOS) soil moisture data network and is publicly available. Data from this site located at, referenced as Australia (2) in Table 1 and Figure 4 of Solander et al., 2020, The pan-tropical soil moisture response to El Nino, Hydrol. Earth Syst. Sci., in press.

54 ENVIRONMENTAL SCIENCES↗

Soil Water Content (m3 m-3), October 2011 - May 2017

Hourly data processed to monthly. Data collected from Cosmic Neutron Probes at variable depth averaging 15 cm that was interpolated to near-surface (0-10 cm). Site located at latitude 0.28 deg N, longitude 36.87 deg E. Data was downloaded from the The COsmic-ray Soil Moisture Observing System (COSMOS) soil moisture data network and is publicly available. Data was made available by the COsmic-ray Soil Moisture Observing SysteM (COSMOS). Data from this site is referenced as Kenya in Table 1 and Figure 4 of Solander et al., 2020, The pan-tropical soil moisture response to El Nino, Hydrol. Earth Syst. Sci., in press.

54 ENVIRONMENTAL SCIENCES↗

Hemispherical variance anomaly and reionization optical depth

ABSTRACT Cosmic microwave background (CMB) full-sky temperature data show a hemispherical asymmetry in power nearly aligned with the Ecliptic, with the Northern hemisphere displaying an anomalously low variance, while the Southern hemisphere appears consistent with expectations from the best-fitting theory, Lambda Cold Dark Matter (ΛCDM). The low signal-to-noise ratio in current polarization data prevents a similar comparison. Polarization realizations constrained by temperature data show that in ΛCDM the lack of variance is not expected to be present in polarization data. Therefore, a natural way of testing whether the temperature result is a fluke is to measure the variance of CMB polarization components. In anticipation of future CMB experiments that will allow for high-precision large-scale polarization measurements, we study how the variance of polarization depends on ΛCDM-parameter uncertainties by forecasting polarization maps with Planck’s Markov chain Monte Carlo chains. We show that polarization variance is sensitive to present uncertainties in cosmological parameters, mainly due to current poor constraints on the reionization optical depth τ, which drives variance at low multipoles. We demonstrate how the improvement in the τ measurement seen between Planck’s two latest data releases results in a tighter constraint on polarization variance expectations. Finally, we consider even smaller uncertainties on τ and how more precise measurements of τ can drive the expectation for polarization variance in a hemisphere close to that of the cosmic-variance-limited distribution.

79 ASTRONOMY AND ASTROPHYSICS↗

Detecting Rain–Snow-Transition Elevations in Mountain Basins Using Wireless Sensor Networks

Here, to provide complementary information on the hydrologically important rain–snow-transition elevation in mountain basins, this study provides two estimation methods using ground measurements from basin-scale wireless sensor networks: one based on wet-bulb temperature T wet and the other based on snow-depth measurements of accumulation and ablation. With data from 17 spatially distributed clusters (178 nodes) from two networks, in the American and Feather River basins of California’s Sierra Nevada, we analyzed transition elevation during 76 storm events in 2014–18. A T wet threshold of 0.5°C best matched the transition elevation defined by snow depth. Transition elevations using T wet in upper elevations of the basins generally agreed with atmospheric snow level from radars located at lower elevations, while radar snow level was ~100 m higher due to snow-level lowering on windward mountainsides during orographic lifting. Diurnal patterns of the difference between transition elevation and radar snow level were observed in the American basin, related to diurnal ground-temperature variations. However, these patterns were not found in the Feather basin due to complex terrain and higher uncertainties in transition-elevation estimates. The American basin tends to exhibit 100-m-higher transition elevations than does the Feather basin, consistent with the Feather basin being about 1° latitude farther north. Transition elevation averaged 155 m higher in intense atmospheric river events than in other events; meanwhile, snow-level lowering was enhanced with a 90-m-larger difference between radar snow level and transition elevation. On-the-ground continuous observations from distributed sensor networks can complement radar data and provide important ground truth and spatially resolved information on transition elevations in mountain basins.

54 ENVIRONMENTAL SCIENCES↗

Field Soil Water Retention of the Prototype Hanford Barrier and Its Variability with Space and Time

Engineered surface barriers (or covers) are used to isolate underlying contaminants from water, plants, animals, and humans. To understand the flow processes within a barrier and the barrier's ability to store and release water, the field hydraulic properties of the barrier need to be known. A multiyear test of the evapotranspiration (ET) barrier at the US Department of Energy's Hanford Site in the southeast of the state of Washington has yielded in situ soil water content and pressure data from multiple locations for a 9‐yr period, offering the opportunity to estimate soil water retention properties at different locations and times. The upper 2‐m layer of the ET barrier is a silt loam, and the top 1 m also contains 15% (w/w) pea gravel. Within this layer, valid monitoring data from 1995 to 2003 for four depths at 12 monitoring stations were used to determine the field water retention of the silt loam, with and without gravel. The data covered a wide range of wetness, from near saturation to the permanent wilting point, and each retention curve contained 51 to 96 data points. The data were described well with the commonly used van Genuchten water retention model. It was found that the spatial variation of the saturated and residual water content and the pore size distribution parameter was relatively small, while that of the van Genuchten α was relatively large. The effects of spatial variability of the retention properties appeared to be larger than the combined effects of added pea gravel and plant roots on the properties. Neither the primary wetting process in the winter season nor the drying process in the summer season nor time had a detectable effect on the water retention of the silt loam barrier.

Zhang, Z. Fred↗

Commissioning and Validation of the First Monte Carlo Based Dose Calculation Algorithm Commercial Treatment Planning System in Mexico

This work presents the beam data commissioning and dose calculation validation of the first Monte Carlo (MC) based treatment planning system (TPS) installed in Mexico. According to the manufacturer specifications, the beam data commissioning needed for this model includes: several in-air and water profiles, depth dose curves, head-scatter factors and output factors (6x6, 12x12, 18x18, 24x24, 42x42, 60x60, 80x80 and 100x100 mm{sup 2}). Radiographic and radiochromic films, diode and ionization chambers were used for data acquisition. MC dose calculations in a water phantom were used to validate the MC simulations using comparisons with measured data. Gamma index criteria 2%/2 mm were used to evaluate the accuracy of MC calculations. MC calculated data show an excellent agreement for field sizes from 18x18 to 100x100 mm{sup 2}. Gamma analysis shows that in average, 95% and 100% of the data passes the gamma index criteria for these fields, respectively. For smaller fields (12x12 and 6x6 mm{sup 2}) only 92% of the data meet the criteria. Total scatter factors show a good agreement (<2.6%) between MC calculated and measured data, except for the smaller fields (12x12 and 6x6 mm{sup 2}) that show a error of 4.7%. MC dose calculations are accurate and precise for clinical treatment planning up to a field size of 18x18 mm{sup 2}. Special care must be taken for smaller fields.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Data for: Climatic Imprint on Interfacially-Controlled Platinum-Palladium Resources

Data package for manuscript "Climatic Imprint on Interfacially-Controlled Platinum-Palladium Resources" by Emily G. Wright, Ivey Wang, Yihang Fang, Elaine D. Flynn, and Jeffrey G. Catalano. This dataset contains adsorption results from experiments designed to investigate the effect of chloride on Pd(II) adsorption to goethite and Pt(II) adsorption to hematite and goethite, including lab experiments, X-ray absorption fine structure spectroscopy, and models of retention within a laterite. See the associated manuscript for full methods information. The file "Wright2025_PtAds_data.csv" contains the target starting Pt concentration (uM), final aqueous Pt and associated error (in uM), calculated adsorbed Pt and associated error (in umol/m2), target and measured aqueous chloride (mM), target aqueous nitrate (mM), final pH, and mineral concentration/loading (g/L). Associated mineral-free controls (mineral loading = 0 g/L) are included; the aqueous Pd error was not calculated and chloride was not measured in every sample. These data appear in Figures 1, S3, S4, S5, S20, and S22 in the associated manuscript. The file "Wright2025_PdAds_data.csv" contains the target starting Pd concentration (uM), final aqueous Pd and associated error (in uM), calculated adsorbed Pd and associated error (in umol/m2), target and measured aqueous chloride (mM), and mineral concentration/loading (g/L). Associated mineral-free controls (mineral loading = 0 g/L) are included; the aqueous Pd error was not calculated and chloride was not measured in every sample. These data appear in Figures 1, S3, S4, S5, and S20 in the associated manuscript. The file "Wright2025_MineralBatches_data.csv" contains the mineral identity and BET specific surface area (m2/g) for every mineral batch synthesized and used in experiments. The annealing time used is listed for hydrothermally annealed goethite. These data appear in Table S2 in the associated manuscript. The file "Wright2025_XRD_data.csv" contains the XRD patterns for every mineral batch synthesized as the counts as a function of two theta (in degrees). See "Wright2025_MineralBatches_data.csv" for more details on specific mineral batches. These data appear in Figure S2 in the associated manuscript. The file "Wright 2025_ZetaPotential_data.csv" contains the measured zeta potentials for samples of goethite (batch G2) at pH 4 the presence of varying amounts of sodium chloride. These data appear in Table S3 in the associated manuscript. The file "Wright2025_XAFSSamples_data.csv" contains the specific mineral batch, measured final aqueous Pd or Pt (uM), measured final aqueous chloride (mM), and estimated adsorbed Pd or Pt (umol/m2) of all XAFS samples. These data appear in Tables S4, S7, S8, and S10 in the associated manuscript. The files "Wright2025_PdXAFS_data.csv" and "Wright2025_PtXAFS_data.csv" contain the normalized spectra of Pd and Pt, respectively, adsorbed to minerals at varying chloride concentrations. See "Wright2025_XAFSSamples_data.csv" for a guide to sample names. Note that "05" in a sample name is equivalent to "0.5". These data appear in Figures 2, S6, S7, S8, S12, S13, and S14 in the associated manuscript. The file "Wright2025_LateriteProfileProfileModelParameters_data.csv" include the ratio of hematite to hematite and goethite in two synthetic, modeled profiles, as well as the modeled surface areas of goethite and hematite as a function of relative depth within the modeled weathering zone. These data were used, in conjunction with equations presented in the paper, to calculate the theoretical concentrations of Pd and Pt (and the resulting Pt/Pd ratio) within the profiles. These data appear in Figure 3 in the associated manuscript. The file "Wright2025_Imagery_data.zip" is a zipped folder containing the TEM and STEM images appear in Figures S18 and S19. Individual files are labeled as either STEM (Fig. S18) or TEM (Fig. S19) with a letter representing the part of the multipart figure.

58 GEOSCIENCES↗

Kilovoltage beam Monte Carlo dose calculations in submillimeter voxels for small animal radiotherapy

Purpose: Small animal conformal radiotherapy (RT) is essential for preclinical cancer research studies and therefore various microRT systems have been recently designed. The aim of this paper is to efficiently calculate the dose delivered using our microRT system based on a microCT scanner with the Monte Carlo (MC) method and to compare the MC calculations to film measurements. Methods: Doses from 2-30 mm diameter 120 kVp photon beams deposited in a solid water phantom with 0.2x0.2x0.2 mm{sup 3} voxels are calculated using the latest versions of the EGSnrc codes BEAMNRC and DOSXYZNRC. Two dose calculation approaches are studied: a two-step approach using phase-space files and direct dose calculation with BEAMNRC simulation sources. Due to the small beam size and submillimeter voxel size resulting in long calculation times, variance reduction techniques are studied. The optimum bremsstrahlung splitting number (NBRSPL in BEAMNRC) and the optimum DOSXYZNRC photon splitting (N{sub split}) number are examined for both calculation approaches and various beam sizes. The dose calculation efficiencies and the required number of histories to achieve 1% statistical uncertainty--with no particle recycling--are evaluated for 2-30 mm beams. As a final step, film dose measurements are compared to MC calculated dose distributions. Results: The optimum NBRSPL is approximately 1x10{sup 6} for both dose calculation approaches. For the dose calculations with phase-space files, N{sub split} varies only slightly for 2-30 mm beams and is established to be 300. N{sub split} for the DOSXYZNRC calculation with the BEAMNRC source ranges from 300 for the 30 mm beam to 4000 for the 2 mm beam. The calculation time significantly increases for small beam sizes when the BEAMNRC simulation source is used compared to the simulations with phase-space files. For the 2 and 30 mm beams, the dose calculations with phase-space files are more efficient than the dose calculations with BEAMNRC sources by factors of 54 and 1.6, respectively. The dose calculation efficiencies converge for beams with diameters larger than 30 mm. Conclusions: A very good agreement of MC calculated dose distributions to film measurements is found. The mean difference of percentage depth dose curves between calculated and measured data for 2, 5, 10, and 20 mm beams is 1.8%.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Quantification of Wellbore Leakage Risk Using Non-destructive Borehole Logging Techniques

Well integrity is important at all potential CCS locations and may play a crucial role establishing leakage risk in areas where there is a high density of existing wells that could be impacted by the storage operations including depleted petroleum fields where EOR or CCS will occur. To address a need for risk quantification methods that can be directly applied to individual wells using borehole logging tools a study was conducted using data from five wells in Wyoming. The objectives of the study were: Objective 1: Develop methods to establish the baseline flow parameters (porosity and permeability or mobility) from individual measurements of the material properties and defects in a well. Objective 2: Develop a correlation between field flow-property data and cement logs that can be used to establish the flow-properties of well materials and well features using cement mapping tools. Objective 3: Establish a method that uses the flow-property model (Objective 2) to analyze the statistical uncertainties associated with individual well leakage that can provide basis for uncertainty in risk calculations. The project objectives were met through the logging of five wells in Carbon and Natrona County Wyoming to collect data that was used to estimate individual and average well flow properties and model the results using ultrasonic data collected during the logging. Three of the five wells provided data on point and average flow properties for well annuli. Data from the other two wells were used to create models of cement permeability and test whether information collected in one well could be used to characterize another well. The results of the in-situ point measurements were confirmed by the lab measurements sidewall cores collected near the same depths Objective 1 was met using the data collected through logging, testing, and sampling. The methods were developed that can establish baseline flow parameters of wells by both point and average test methods. The methods to estimate the flow properties modeling of point pressure tests, modeling of vertical interference tests, and laboratory measurement of cased-hole sidewall cores The wells were in sufficiently good shape to allow the development of the characterization methods while still having enough defects to study differences in results as they relate to well integrity. Samples and tests analyzed from three of five wells studied in showed the cements were largely intact and had not degraded from exposure native brines. Log results taken in conjunction with the core measurements indicate that interfaces and/or problems with cement placement due to eccentering provide preferential flow paths for fluids, which can increase the effective permeability of the barrier several orders of magnitude above the permeability of intact cement. The results of the maps created using logging tools indicating that the cement condition and bond are generally good identify a need for more research to understand how logs can be used to predicteffective well permeabilities such as those measured by the VITs in this study.

42 ENGINEERING↗

Measurements of Turbulence at Two Tidal Energy Sites in Puget Sound, WA

Field measurements of turbulence are pre- sented from two sites in Puget Sound, WA (USA) that are proposed for electrical power generation using tidal current turbines. Rapidly sampled data from multiple acoustic Doppler instruments are analyzed to obtain statistical mea- sures of fluctuations in both the magnitude and direction of the tidal currents. The resulting turbulence intensities (i.e., the turbulent velocity fluctuations normalized by the harmonic tidal currents) are typically 10% at the hub- heights (i.e., the relevant depth bin) of the proposed turbines. Length and time scales of the turbulence are also analyzed. Large-scale, anisotropic eddies dominate the energy spectra, which may be the result of proximity to headlands at each site. At small scales, an isotropic turbulent cascade is observed and used to estimate the dissipation rate of turbulent kinetic energy. Data quality and sampling parameters are discussed, with an emphasis on the removal of Doppler noise from turbulence statistics.

16 TIDAL AND WAVE POWER↗

Global Paleoclimatic Data for 6000 Yr B.P.

To determine regional and global climatic variations during the past 6000 years, pollen, lake level, and marine plankton data from 797 stations were compiled to form a global data set. Radiocarbon dating and dated tephras were used to determine the ages of the specimens. The data available for the pollen data are site number, site name, latitude, longitude, elevation, and percentages of various taxa. For lake-level data, the data are site number, site name, latitude, longitude, and lake-level status. And for marine plankton, the data are site number, site name, latitude, longitude, water depth, date, dating control code, depth of sample, interpolated age of sample, estimated winter and summer sea-surface temperatures, and percentages of various taxa. The data are in 55 files: 5 files for each of 9 geographic regions and 10 supplemental files. The files for each region include (1) a FORMAT file describing the format and contents of the data for that region, (2) an INDEX file containing descriptive information about each site and its data, (3) a DATA file containing the data and available climatic estimates, (4) a PUBINDEX file indexing the bibliographic references associated with each site, and (5) a REFERENCE file containing the bibliographic references. The files range in size from 2 to 66 kB.

54 ENVIRONMENTAL SCIENCES↗

Mapping systematic errors in helium abundance determinations using Markov Chain Monte Carlo

Monte Carlo techniques have been used to evaluate the statistical and systematic uncertainties in the helium abundances derived from extragalactic H II regions. The helium abundance is sensitive to several physical parameters associated with the H II region. In this work, we introduce Markov Chain Monte Carlo (MCMC) methods to efficiently explore the parameter space and determine the helium abundance, the physical parameters, and the uncertainties derived from observations of metal poor nebulae. Experiments with synthetic data show that the MCMC method is superior to previous implementations (based on flux perturbation) in that it is not affected by biases due to non-physical parameter space. The MCMC analysis allows a detailed exploration of degeneracies, and, in particular, a false minimum that occurs at large values of optical depth in the He I emission lines. We demonstrate that introducing the electron temperature derived from the [O III] emission lines as a prior, in a very conservative manner, produces negligible bias and effectively eliminates the false minima occurring at large optical depth. We perform a frequentist analysis on data from several ''high quality'' systems. Likelihood plots illustrate degeneracies, asymmetries, and limits of the determination. In agreement with previous work, we find relatively large systematic errors, limiting the precision of the primordial helium abundance for currently available spectra.

79 ASTRONOMY AND ASTROPHYSICS↗

Deep learning inversion of gravity data for detection of CO 2 plumes in overlying aquifers

In this work, we developed an effective U-Net based deep learning (DL) model for inversion of surface gravity data on a rectangular grid to predict 2-D high-resolution subsurface CO 2 distribution along a vertical cross-section due to CO 2 leakage through a wellbore within a deep CO 2 storage reservoir. We used synthetic data to model two types of CO 2 leakage scenarios: one CO 2 plume in a shallow aquifer (single plume case), and two plumes present at different depths (double plume case). The 3-D synthetic plume samples were created by sampling among predetermined CO 2 plume depths, saturations, and volumes. The corresponding surface gravity data on a rectangular grid were generated by a 3-D forward model. The U-Net model detected 72% of single-plume samples, and one or both plumes in 75% of double-plume samples. Most of the undetected single plumes have small gravity field strengths below the typical noise level of 5 μGal. This model generated reproducible, reliable predictions with acceptable errors and demonstrated improved spatial resolution over the conventional least-squares inversion. In contrast to the conventional least-squares inversion, which often overestimates the size of its target and underestimates its density, this U-Net model accurately delineated the boundary of a target. Furthermore, this DL inversion detected deep, small, or low saturation CO 2 plumes that are often more difficult to resolve with conventional gravity inversion methods. We note the limitations of this feasibility study, including the use of synthetic data with regular CO 2 plume shapes, and the prediction of a 2-D plume cross-section rather than the full 3-D plume, as well, we recognize the lower detection fraction for double-plume scenarios. Nevertheless, this study demonstrates that DL gravity inversion is a promising and potentially superior method to conventional least-squares inversion. Our U-Net based deep learning inversion approach may be adapted for inversion of other types of geophysical data. DL inversion can facilitate near real-time monitoring of geologic carbon sequestration to provide site operators with prompt information about subsurface CO 2 distribution for risk management and mitigation.

58 GEOSCIENCES↗

Using Ancillary Information to Improve Hypocenter Estimation: Bayesian Single Event Location (BSEL).

We have developed and tested an algorithm, Bayesian Single Event Location (BSEL), for esti- mating the location of a seismic event. The estimation approach di*ers from established non-linear regression techniques by using a Bayesian prior probability density function (prior PDF) to incor- porate ancillary physical basis constraints about event location. P wave arrival times from seismic events are used in the development. Depth, a focus of this paper, may be modeled with a prior PDF (potentially skewed) that captures physical basis bounds from ancillary event characteristics. For instance the surface wave Rg is present in a waveform only when an event is shallow. A high- condence Rg detection in one or more event waveforms implies a shallow-skewed prior PDF for the depth parameter. This PDF is constructed from a physically-based Rayleigh wave depth excitation eigenfunction that is based on the minimum period of observation from a spectrogram analysis and estimated near-source elastic parameters. The proposed Bayesian algorithm is illustrated with events that demonstrate its congruity with established hypocenter estimation methods and its application potential. The BSEL method is applied to the Mw 5.6 Dillon, MT earthquake of July 26, 2005 and a shallow Mw 4 earthquake that occurred near Bardwell, KY on June 6, 2003. In both cases we simulate BSEL on a small subset of arrival time data to illustrate the power of the technique. No Rg was actually observed for the Dillon, MT earthquake, but we used the minimum observed period of a Rayleigh wave (7 seconds) to reduce the depth and origin time uncertainty. A strong Rg was observed from the Bardwell, KY earthquake that places very strong constraints on depth and origin time.

58 GEOSCIENCES↗

Determination of the Electron Escape Depth for NEXAFS Spectropy

A novel method was developed to determine carbon atom density as a function of depth by analyzing the postedge signal in near-edge X-ray absorption fine structure (NEXAFS) spectra. We show that the common assumption in the analysis of NEXAFS data from polymer films, namely, that the carbon atom density is constant as a function of depth, is not valid. This analysis method is then used to calculate the electron escape depth (EED) for NEXAFS in a model bilayer system that contains a perfluorinated polyether (PFPE) on top of a highly oriented pyrolitic graphite (HOPG) sample. Because the carbon atom densitites of both layers are known, in addition to the PFPE surface layer thickness, the EED is determined to be 1.95 nm. This EED is then used to measure the thickness of the perfluorinated surface layer of poly(4-(1H,1H,2H,2H-perfluorodecyl)oxymethylstyrene) (PFPS).

36 MATERIALS SCIENCE↗

Data associated with the manuscript “Radiative impact of record-breaking wildfires from integrated ground-based data” collected in Richland, Washington in September 2020

This data package is associated with the publication “Radiative impact of record-breaking wildfires from integrated ground-based data” submitted to Nature Scientific Reports (Kassianov et al., 2024). Data from ground-based measurements of shortwave and spectrally resolved irradiance and aerosol optical depth (AOD) in the visible and near-infrared spectral ranges were assessed to quantify the radiative impact of the September 2020 wildfires that occurred in the Western United States. Data were collected in September 2020 by several ground-based instruments at the Atmospheric Measurements Laboratory (AML) located in Richland, Washington (46.3451, -119.2792). These data include (1) Aerosol Optical Depth (AOD); (2) spectrally resolved and shortwave (SW) irradiances; (3) backscatter profiles; (4) total sky images; and (5) near-surface ambient air temperatures.The data package consists of five sub-directories: (1) “AML_Ceilometer_”; (2)” AML_CSPHOT_”; (3) “AML_MFRSR_irradiances_”; (4) “AML_SW_irradiances_and_Temp_”; (5) “AML_TSI_images_”; and 6 files stored at the directory level, including the readme, file-level metadata file, and data dictionary. The file-level metadata file (the file ending in “_flmd.csv”) lists all files contained in this data package and descriptions for each. The data dictionary (the file ending in “_dd.csv”) describes each tabular column header’s unit, definition, and structure. Below are descriptions of each sub-directory:“AML_Ceilometer_” includes ceilometer data collected at the AML. These files contain the corresponding narratives of data. Details related to the ceilometer data can be found in Morris (2016). “AML_CSPHOT_” includes ascii files with high-temporal resolution (about 10-15 min) AML CSPHOT data and their daily-averaged counterparts. These two files contain the corresponding narratives of data. Details related to the CSPHOT data can be found in Gregory (2011). “AML_MFRSR_irradiances_” includes ascii files with the AML MFRSR-measured diffuse, normal, and total spectrally resolved irradiance. Details related to the MFRSR data can be found in Hodges and Michalsky (2016) and Koontz et al. (2013). “AML_SW_irradiances_+_Temp_” includes near-surface ambient air temperature and SW irradiances, namely direct normal, diffuse hemispherical, and total hemispheric (global), measured at the AML. These files also incorporate the corresponding narratives of data. Details related to the SW irradiances can be found in Andreas et al. (2018). “AML_TSI_images_” includes Total Sky Images (TSIs) collected at the AML. Details related to the TSI data can be found in Morris (2005).

54 ENVIRONMENTAL SCIENCES↗