Search NASA⌕ Search

SEARCH · Search NASA

Results for “data taking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Search for the critical point of the nuclear matter phase diagram. first results from the beam energy SCAN program at RHIC

In 2010, the Relativistic Heavy Ion Collider (RHIC) launched a multi-step experimental program to investigate the QCD Phase Diagram in general, and to search for the QCD Critical Point (CP) and/or 1st order phase transition in particular. The BES (Beam Energy Scan) program involves an “energy scan” of Au+Au collisions from the top RHIC energy (√s = 200 GeV) down to energies as low as 5 GeV in NN center of mass. During the first BES run (2010), data were collected at 7.7, 11.5 and 39 GeV. It was complemented in 2011 by two other data sets at 27 and 19.6 GeV. The preparations for the remaining data taking at √s = 5 GeV are in progress. The overview of the BES program and the first experimental results are presented and discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Highlights from the STAR Experiment

Despite the challenges of pandemic, the years 2020-21 were quite successful for STAR. We completed the Beam Energy Scan program phase 2 and installed the forward upgrade with which STAR finished data-taking for polarized p+p collisions at 510 GeV. In this contribution, we discuss STAR results on five different topics that were presented in twenty-one parallel talks, forty-seven posters, and two flash talks at the Quark Matter 11 2022 conference.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

NOvA: Present and Future

NOvA is a next generation neutrino oscillation experiment designed to search for muon neutrino to electron neutrino oscillations by comparing electron neutrino event rates in a Near Detector at Fermilab with the rates observed in a large Far Detector at Ash River, Minnesota, 810 km from Fermilab. The detectors are totally active, segmented, liquid scintillator detectors and are located 14 mrad off the NuMI beam axis. The Far Detector has begun construction and will begin taking data in early 2013. The experiment aims to measure the neutrino mixing angle theta_13 and will push the search for electron neutrino appearance beyond the current limits by more than an order of magnitude. For non-zero theta_13, it is possible for NOvA to observe CP violation in neutrinos and establish the neutrino mass hierarchy. The NOvA prototype near detector on the surface (NDOS) began running at Fermilab in November and registered its first neutrinos from the NuMI beam in December 2010. An overview and current status of the experiment will be presented.

43 PARTICLE ACCELERATORS↗

Status Update for the MINER$\nu$A Experiment

MINER{nu}A (Main INjEctoR {nu}-A) is a few-GeV neutrino cross section experiment that began taking data in the FNAL NuMI beam-line in the fall of 2009. MINER{nu}A employs a fine-grained detector capable of complete kinematic characterization of neutrino interactions. The detector consists of an approximately 6.5 ton active target region composed of plastic scintillator with additional carbon, iron, and lead targets upstream of the active region. The experiment will provide important inputs for neutrino oscillation searches and a pure weak probe of nuclear structure. Here we offer a set of initial kinematic distributions of interest and provide a general status update.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Quadrupole beam-based alignment in the RHIC interaction regions

Continued beam-based alignment (BBA) efforts have provided significant benefit to both heavy ion and polarized proton operations at RHIC. Recent studies demonstrated previously unknown systematic beam position monitor (BPM) offset errors and produced accurate measurements of individual BPM offsets in the experiment interaction regions. Here we describe the algorithm used to collect and analyze data during the 2010 and early 2011 RHIC runs and the results of these measurements. BBA data has been collected over the past two runs for all three of the active experimental IRs at RHIC, updating results from the 2005 run which were taken with incorrectly installed offsets. The technique was successfully applied to expose a systematic misuse of the BPM survey offsets in the control system. This is likely to benefit polarized proton operations as polarization transmission through acceleration ramps depends on RMS orbit control in the arcs, but a quantitative understanding of its impact is still under active investigation. Data taking is ongoing as are refinements to the BBA technique aimed at reducing systematic errors and properly accounting for dispersive effects. Further development may focus on non-triplet BPMs such as those located near snakes, or arc quadrupoles that do not have individually shunted power supplies (a prerequisite for the current method) and as such, will require a modified procedure.

43 PARTICLE ACCELERATORS↗

Gravitational Waves from Coalescing Binary Black Holes: Theoretical and Experimental Challenges

A network of ground-based interferometric gravitational wave detectors (LIGO/VIRGO/GEO/...) is currently taking data near its planned sensitivity. Coalescing black hole binaries are among the most promising, and most exciting, gravitational wave sources for these detectors. The talk will review the theoretical and experimental challenges that must be met in order to successfully detect gravitational waves from coalescing black hole binaries, and to be able to reliably measure the physical parameters of the source (masses, spins, ...).

79 ASTRONOMY AND ASTROPHYSICS↗

Video links from TRIUMF (Vancouver), Brookhaven National Laboratory (New York), Fermi National Accelerator Laboratory (Illinois)

A presentation discussing the CMS Experiment at LHC, including the public events of the year, news, and the current state of the collaboration. Information about Exercising the Grid, which took place in May 2008, is provided. Following this test, the result of almost 20 years of design and constuction to begin taking data with LHC beams, the CMS became a running experiment.

Source record↗

RISK COMMUNICATION FOR ES&H PROFESSIONALS AND LINE SUPERVISORS PARTICIPANT MANUAL COURSE NUMBER 004111 REV 0.1 JULY 2011

This course will help you successfully apply risk communication principles when interacting with workers regarding work hazards. What Is the Difference Between a Risk and a Hazard? In many cases, the terms 'risk' and 'hazard' are incorrectly used interchangeably. A hazard is a physical condition or practice with the potential for causing harm/adverse effects. A risk is the probability of harm/adverse effects occurring from an exposure to a hazard. It is modified by the severity of harm (the consequence). Once a hazard is identified, a risk assessment is conducted to determine the severity of the risk. It uses scientific methods and rigorous tests to determine the effects of the risk on people and the environment. Risk Management takes data from the risk assessment and writes policies to help protect people and the environment against the risk. Risk communication is an ongoing process that starts soon after a hazard is identified and continues through the writing of policies. In the past, governing agencies did not do a good job of communicating risk; they would only communicate about risk after studies had been conducted and policies written.

99 GENERAL AND MISCELLANEOUS↗

Last Year of PEP-II B-Factory Operation

The PEP-II B-Factory at SLAC (3.1 GeV e{sup +} x 9.0 GeV e{sup -}) operated from 1999 to 2008, delivering luminosity to the BaBar experiment. The design luminosity was reached after one and a half years of operation. In the end PEP-II surpassed by four times its design luminosity reaching 1.21 x 10{sup 34} cm{sup -2} s{sup -1}. It also set stored beam current records of 2.1 A e{sup -} and 3.2 A e{sup +}. Continuous injection was implemented with BaBar taking data. The total delivered luminosity to the BaBar detector was 557.4 fb{sup -1} spanning five upsilon resonances. PEP-II was constructed by SLAC, LBNL, and LLNL with help from BINP, IHEP, the BaBar collaboration, and the US DOE OHEP.

43 PARTICLE ACCELERATORS↗

Lepton Flavour Violation in Tau Decays at BaBar

Recent results from {tau} physics studies at BABAR are presented with an emphasis on Lepton Flavour Violation measurements. The results from the current generation of B-meson Factories are already beginning to constrain the parameter space of models that go beyond the Standard Model. By the end of their data-taking, the current generation of B-meson factories will have produced nearly 2 billion {tau} pair decays. The physics potential of this legacy has only just begun to be exploited.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Parameters for the PEP-II B-Factory at SLAC in 2008

The PEP-II B-Factory at SLAC (3.1 GeV e{sup +} x 9.0 GeV e{sup -}) operated from 1999 to 2008, delivering luminosity to the BaBar experiment. The design luminosity was reached after one and a half years of operation. In the end PEP-II surpassed, by four times, its design luminosity reaching 1.21 x 10{sup 34} cm{sup -2}s{sup -1}. It also set world stored beam current records of 2.1 A e{sup -} and 3.2 A e{sup +}. Continuous injection was implemented with BaBar successfully taking data. The total delivered luminosity to the BaBar detector was 557.4 fb{sup -1} spanning five upsilon resonances. PEP-II was constructed by SLAC, LBNL, and LLNL with help from BINP, IHEP, the BaBar collaboration, and the US DOE OHEP.

43 PARTICLE ACCELERATORS↗

B Decay and CP Violation: CKM Angles and Sides at the BABAR and BELLE B-Factories

A remarkable success has been achieved by the B-Factories, going beyond expectation in some field, like the measurement of {gamma}. BABAR has now finished its data taking, leaving BELLE alone in the 'race', but still many analyses are going on. The CKM UT is constrained by both measurements of CP-conserving and CP-violating quantities, leading to a picture of the CKM sector consistent with the SM. Measurements of semi-leptonic decays benefit from improving experimental techniques and more precise theoretical computations. The angle {beta} is a precision measurement, reaching accuracy of SM calculation. The angle {alpha} will ultimatly be limited by penguin pollution. The measurement of {gamma} is reaching the 13{sup o} precision.

54 ENVIRONMENTAL SCIENCES↗

Status of EXO-200

EXO-200 is the first phase of the Enriched Xenon Observatory (EXO) experiment, which searches for neutrinoless double beta decay in {sup 136}Xe to measure the mass and probe the Majorana nature of the neutrino. EXO-200 consists of 200 kg of liquid Xe enriched to 80% in {sup 136}Xe in an ultra-low background TPC. Energy resolution is enhanced through the simultaneous collection of scintillation light using Large Area Avalanche Photodiodes (LAAPD's) and ionization charge. It is being installed at the WIPP site in New Mexico, which provides a 2000 meter water-equivalent overburden. EXO-200 will begin taking data in 2009, with the expected two-year sensitivity to the half-life for neutrinoless double beta decay of 6.4 x 10{sup 25} years. According to the most recent nuclear matrix element calculations, this corresponds to an effective Majorana neutrino mass of 0.13 to 0.19 eV. It will also measure the two neutrino mode for the first time in {sup 136}Xe.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Beam-Beam Interaction at the PEP-II E+ E- Collider

The PEP-II B-Factory at SLAC (3.1 GeV e{sup +} x 9.0 GeV e{sup -}) operated from 1999 to 2008, delivering luminosity to the BaBar experiment. The design luminosity was reached after one and a half years of operation. PEP-II ultimately surpassed by four times its design luminosity reaching 1.21 x 10{sup 34} cm{sup -2} s{sup -1}. It also set world records for stored beam currents of 2.1 A e{sup -} and 3.2 A e{sup +}. Continuous injection was implemented with BaBar taking data. The total delivered luminosity to the BaBar detector was 557.4 fb{sup -1} spanning five upsilon resonances. PEP-II was constructed by SLAC, LBNL, and LLNL with help from BINP, IHEP, the BaBar collaboration, and the US DOE OHEP. In order to reach four times the design luminosity the PEP-II accelerator had to manage higher beam currents, lower {beta}{sub y}*s, more bunches, and increased beam-beam tune shifts. In this note the effects of these changes on the beam-beam interaction are discussed.

43 PARTICLE ACCELERATORS↗

High precision measurements of the neutron spin structure in Hall A at Jlab

Conclusions of this presentation are: (1) JLab energy upgrade will offer new exciting opportunities to study the nucleon (spin) structure such as high precision, unexplored phase space, flavor decomposition; (2) Large technological efforts is in progress to optimally exploit these opportunities; (3) HallA will be the first hall to get the new beam, first experiment expected to run in 2014; (4) A1n likely one of the first experiments to take data in the new 12 GeV era; and (5) SIDIS exp. will follow in couple of years.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A Future Polarized Drell-Yan Experiment at Fermilab

The topic is treated in a series of slides under the following headings: Motivation (Nucleon Spin Puzzle, Quark Orbital Momentum and the Sivers Function, Accessing Sivers via Polarized Drell-Yan (p+p↑ → μ + μ - )); Transition of Seaquest (E906 → E1039) (Building a Polarized proton Target, Status of Polarized Target); and Outlook. The nucleon spin puzzle: when the quark and gluon contributions to the proton spin are evaluated, nearly 50% of the measured spin is missing; lattice QCD calculations indicate as much as 50% may come from quark orbital angular momentum. Sea quarks should carry orbital angular momentum (O.A.M.). The E1039 Polarized Target Drell-Yan Experiment provides opportunity to study possible Sea Quark O.A.M. Data taking is expected to begin in the spring of 2017.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The DAMIC Dark Matter Experiment

The DAMIC (DArk Matter In CCDs) experiment uses high-resistivity, scientific-grade CCDs to search for dark matter. The CCD’s low electronic noise allows an unprecedently low energy threshold of a few tens of eV; this characteristic makes it possible to detect silicon recoils resulting from interactions of low-mass WIMPs. In addition, the CCD’s high spatial resolution and the excellent energy response results in very effective background identification techniques. The experiment has a unique sensitivity to dark matter particles with masses below 10 GeV/c 2 . Previous results have motivated the construction of DAMIC100, a 100 grams silicon target detector currently being installed at SNOLAB. The mode of operation and unique imaging capabilities of the CCDs, and how they may be exploited to characterize and suppress backgrounds are discussed, as well as physics results after one year of data taking.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Status of the DAMIC Direct Dark Matter Search Experiment

The DAMIC experiment uses fully depleted, high resistivity CCDs to search for dark matter particles. With an energy threshold $\sim$50 eV$_{ee}$, and excellent energy and spatial resolutions, the DAMIC CCDs are well-suited to identify and suppress radioactive backgrounds, having an unrivaled sensitivity to WIMPs with masses $<$6 GeV/$c^2$. Early results motivated the construction of a 100 g detector, DAMIC100, currently being installed at SNOLAB. This contribution discusses the installation progress, new calibration efforts near the threshold, a preliminary result with 2014 data, and the prospects for physics results after one year of data taking.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗