Search NASA⌕ Search

SEARCH · Search NASA

Results for “disordered solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Thermoelectric properties of epitaxial ScN films deposited by reactive magnetron sputtering onto MgO(001) substrates

Epitaxial ScN(001) thin films were grown on MgO(001) substrates by dc reactive magnetron sputtering. The deposition was performed in an Ar/N{sub 2} atmosphere at 2 Multiplication-Sign 10{sup -3} Torr at a substrate temperature of 850 Degree-Sign C in a high vacuum chamber with a base pressure of 10{sup -8} Torr. In spite of oxygen contamination of 1.6 {+-} 1 at. %, the electrical resistivity, electron mobility, and carrier concentration obtained from a typical film grown under these conditions by room temperature Hall measurements are 0.22 m{Omega} cm, 106 cm{sup 2} V{sup -1} s{sup -1}, and 2.5 Multiplication-Sign 10{sup 20} cm{sup -3}, respectively. These films exhibit remarkable thermoelectric power factors of 3.3-3.5 Multiplication-Sign 10{sup -3} W/mK{sup 2} in the temperature range of 600 K to 840 K. The cross-plane thermal conductivity is 8.3 W/mK at 800 K yielding an estimated ZT of 0.3. Theoretical modeling of the thermoelectric properties of ScN calculated using a mean-free-path of 23 nm at 300 K is in very good agreement with the experiment. These results also demonstrate that further optimization of the power factor of ScN is possible. First-principles density functional theory combined with the site occupancy disorder technique was used to investigate the effect of oxygen contamination on the electronic structure and thermoelectric properties of ScN. The computational results suggest that oxygen atoms in ScN mix uniformly on the N site forming a homogeneous solid solution alloy. Behaving as an n-type donor, oxygen causes a shift of the Fermi level in ScN into the conduction band without altering the band structure and the density of states.

36 MATERIALS SCIENCE↗

Boundary scattering of phonons: Specularity of a randomly rough surface in the small-perturbation limit

Scattering of normally incident longitudinal and transverse acoustic waves by a randomly rough surface of an elastically isotropic solid is analyzed within the small-perturbation approach. In the limiting case of a large correlation length L compared with the acoustic wavelength, the specularity reduction is given by 4η 2 k 2 ,where η is the rms roughness and k is the acoustic wave vector, which is in agreement with the well-known Kirchhoff approximation result often referred to as Ziman's equation [J. M. Ziman, Electrons and Phonons (Clarendon Press, Oxford, 1960)]. In the opposite limiting case of a small correlation length, the specularity reduction is discovered to be proportional to η 2 k 4 L 2 , with the fourth power dependence on frequency as in Rayleigh scattering. Numerical calculations for a Gaussian autocorrelation function of surface roughness connect these limiting cases and reveal a maximum of diffuse scattering at an intermediate value of L . This maximum becomes increasingly pronounced for the incident longitudinal wave as the Poisson's ratio of the medium approaches 1/2 as a result of increased scattering into transverse and Rayleigh surface waves. The results imply that thermal transport models using Ziman's formula are likely to overestimate the heat flux dissipation due to boundary scattering, whereas modeling interface roughness as atomic disorder is likely to underestimate scattering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tailoring the Angular Mismatch in MoS 2 Homobilayers through Deformation Fields

Ultrathin MoS 2 has shown remarkable characteristics at the atomic scale with an immutable disorder to weak external stimuli. Ion beam modification unlocks the potential to selectively tune the size, concentration, and morphology of defects produced at the site of impact in 2D materials. Combining experiments, first-principles calculations, atomistic simulations, and transfer learning, it is shown that irradiation-induced defects can induce a rotation-dependent moiré pattern in vertically stacked homobilayers of MoS 2 by deforming the atomically thin material and exciting surface acoustic waves (SAWs). Furthermore, the direct correlation between stress and lattice disorder by probing the intrinsic defects and atomic environments are demonstrated. The method introduced in this paper sheds light on how engineering defects in the lattice can be used to tailor the angular mismatch in van der Waals (vdW) solids.

2D materials↗

Enhancing the Electrode Gravimetric Capacity of Li 1.2 Mn 0.4 Ti 0.4 O 2 Cathode Using Interfacial Carbon Deposition and Carbon Nanotube-Mediated Electrical Percolation

Mn-based cation disordered rocksalt oxides (Mn-DRX) are emerging as promising cathode materials for next-generation Li-ion batteries due to their high specific capacities and cobalt and nickel free characteristic. However, to reach the theoretical capacity, solid-state method synthesized Mn-DRX materials require activation via post-synthetic ball milling, typically incorporating more than 20 wt.% conductive carbon that adversely reduces the electrode level gravimetric capacity. To solve this issue, we firstly deposit amorphous carbon on the surface of the Li 1.2 Mn 0.4 Ti 0.4 O 2 (LMTO) particles to increase the electrical conductivity by a five order of magnitude. Although the cathode material gravimetric first charge capacity reaches 180 mAh/g, its highly irreversible behavior leads to a 70 mAh/g first discharge capacity. Subsequently, to ensure a good electrical percolation network, the LMTO material is ball milled with multi-wall carbon nanotube (CNT) to obtain a 78.7 wt.% LMTO active material loading in the cathode electrode (LMTO-CNT). As a result, a 210 mAh/g cathode electrode gravimetric first charge and 165 mAh/g first discharge capacity are obtained, compared to the respective capacity values of 222 mAh/g and 155 mAh/g for the LMTO ball milled with 20 wt.% SuperP C65 electrode (LMTO-SP). After 50 cycles, the LMTO-CNT delivers a 121 mAh/g electrode gravimetric discharge capacity, largely outperforming the 44 mAh/g value of the LMTO-SP. In conclusion, our study demonstrates that while ball milling is necessary to achieve the theoretical capacity of LMTO, a careful selection of the additive, such as CNT, effectively reduces the required carbon quantity to achieve a higher electrode gravimetric discharge capacity.

25 ENERGY STORAGE↗

Deformation in amorphous–crystalline nanolaminates—an effective-temperature theory and interaction between defects

Experiments and atomic-scale simulations suggest that the transmission of plasticity carriers in deforming amorphous–crystalline nanolaminates is mediated by the biphase interface between the amorphous and crystalline layers. In this study, we present a micromechanics model for these biphase nanolaminates that describes defect interactions through the amorphous–crystalline interface (ACI). The model is based on an effective-temperature framework to achieve a unified description of the slow, configurational atomic rearrangements in both phases when driven out of equilibrium. We show how the second law of thermodynamics constrains the density of defects and the rate of configurational rearrangements, and apply this framework to dislocations in crystalline solids and shear transformation zones (STZs) in amorphous materials. The effective-temperature formulation enables us to interpret the observed movement of dislocations to the ACI and the production of STZs at the interface as a 'diffusion' of configurational disorder across the material. Finally, we demonstrate favorable agreement with experimental findings reported in (Kim et al 2011 Adv. Funct. Mater. 21 4550–4), and demonstrate how the ACI acts as a sink of dislocations and a source of STZs.

36 MATERIALS SCIENCE↗

The Bi{sub 2}O{sub 3}–Fe{sub 2}O{sub 3}–Sb{sub 2}O{sub 5} system phase diagram refinement, Bi{sub 3}FeSb{sub 2}O{sub 11} structure peculiarities and magnetic properties

The refinement of the Bi{sub 2}O{sub 3}–Fe{sub 2}O{sub 3}–Sb{sub 2}O{sub 5} system phase diagram has been performed and the existence of the two ternary compounds has been confirmed. The first one with a pyrochlore-type structure (sp. gr. Fd 3-barm) exists in the wide solid solution region, (Bi{sub 2−x}Fe{sub x})Fe{sub 1+y}Sb{sub 1−y}O{sub 7±δ}, where x=0.1–0.4 and y=−0.13–0.11. The second one, Bi{sub 3}FeSb{sub 2}O{sub 11}, corresponds to the cubic KSbO{sub 3}-type structure (sp. gr. Pn 3-bar) with unit cell parameter a=9.51521(2) Å. The Rietveld structure refinement showed that this compound is characterized by disordered structure. The Bi{sub 3}FeSb{sub 2}O{sub 11} factor group analysis has been carried out and a Raman spectrum has been investigated. According to magnetization measurements performed at the temperature range 2–300 K it may be concluded that the Bi{sub 3}FeSb{sub 2}O{sub 11} magnetic properties can be substantially described as a superposition of strong short-range antiferromagnetic exchange interactions realizing inside the [(FeSb{sub 2})O{sub 9}] 3D-framework via different pathways. - Graphical abstract: The refinement of the Bi{sub 2}O{sub 3}–Fe{sub 2}O{sub 3}–Sb{sub 2}O{sub 5} system phase diagram has been performed and the existence of the solid solution with a pyrochlore-type structure (sp. gr. Fd 3-barm) and Bi{sub 3}FeSb{sub 2}O{sub 11}, correspond of the cubic KSbO{sub 3}-type structure (sp. gr. Pn 3-bar has been confirmed. The structure refinement, Raman spectroscopy as well as magnetic measurements data of Bi{sub 3}FeSb{sub 2}O{sub 11} are presented. - Highlights: • The Bi{sub 2}O{sub 3}–Fe{sub 2}O{sub 3}–Sb{sub 2}O{sub 5} system phase diagram refinement has been performed. • The Bi{sub 3}FeSb{sub 2}O{sub 11} existence along with pyrochlore structure compound is shown. • It was determined that the Bi{sub 3}FeSb{sub 2}O{sub 11} is of disordered cubic KSbO{sub 3}-type structure. • Factor group analysis of Bi{sub 3}FeSb{sub 2}O{sub 11} vibrational spectrum has been performed. • Short-range antiferromagnetic interactions govern Bi{sub 3}FeSb{sub 2}O{sub 11} magnetic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of cathode electrolyte interfacial (CEI) layer on long term cycling of all-solid-state thin-film batteries

All-solid-state lithium-ion batteries have the potential to not only push the current limits of energy density by utilizing Li metal, but also improve safety by avoiding flammable organic electrolyte. However, understanding the role of solid electrolyte – electrode interfaces will be critical to improve performance. In this paper, we conducted long term cycling on commercially available lithium cobalt oxide (LCO)/lithium phosphorus oxynitride (LiPON)/lithium (Li) cells at elevated temperature to investigate the interfacial phenomena that lead to capacity decay. STEM-EELS analysis of samples revealed a previously unreported disordered layer between the LCO cathode and LiPON electrolyte. This electrochemically inactive layer grew in thickness leading to loss of capacity and increase of interfacial resistance when cycled at 80 °C. Finally, the stabilization of this layer through interfacial engineering is crucial to improve the long term performance of thin-film batteries especially under thermal stress.

25 ENERGY STORAGE↗

Non-Markovian Hole Excess Noise in Avalanche Amorphous Selenium Thin Films

Enhancing the signal-to-noise ratio in avalanche photodiodes by utilizing impact ionization gain requires materials exhibiting low excess noise factors. Amorphous selenium (a-Se) as a wide bandgap at ~2.1 eV, a solid-state avalanche layer, demonstrates single-carrier hole impact ionization gain and manifests ultralow thermal generation rates. A comprehensive study of the history dependent and non-Markovian nature of hot hole transport in a-Se was modeled using a Monte Carlo (MC) random walk of single hole free flights, interrupted by instantaneous phonon, disorder, hole–dipole, and impact-ionization scattering interactions. The hole excess noise factors were simulated for 0.1–15 μm a-Se thin-films as a function of mean avalanche gain. The hole excess noise factors in a-Se decreases with an increase in electric field, impact ionization gain, and device thickness. The history dependent nature of branching of holes is explained using a Gaussian avalanche threshold distance distribution and the dead space distance, which increases determinism in the stochastic impact ionization process. An ultralow non-Markovian excess noise factor of ~1 was simulated for 100 nm a-Se thin films corresponding to avalanche gains of 1000. Future detector designs can utilize the nonlocal/non-Markovian nature of the hole avalanche in a-Se, to enable a true solid-state photomultiplier with noiseless gain.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ STEM-EELS observation of nanoscale interfacial phenomena in all-solid-state batteries

Behaviors of functional interfaces are crucial factors in the performance and safety of energy storage and conversion devices. Indeed, solid electrode–solid electrolyte interfacial impedance is now considered the main limiting factor in all-solid-state batteries rather than low ionic conductivity of the solid electrolyte. In this paper, we present a new approach to conducting in situ scanning transmission electron microscopy (STEM) coupled with electron energy loss spectroscopy (EELS) in order to uncover the unique interfacial phenomena related to lithium ion transport and its corresponding charge transfer. Our approach allowed quantitative spectroscopic characterization of a galvanostatically biased electrochemical system under in situ conditions. Using a LiCoO 2 /LiPON/Si thin film battery, an unexpected structurally disordered interfacial layer between LiCoO 2 cathode and LiPON electrolyte was discovered to be inherent to this interface without cycling. During in situ charging, spectroscopic characterization revealed that this interfacial layer evolved to form highly oxidized Co ions species along with lithium oxide and lithium peroxide species. These findings suggest that the mechanism of interfacial impedance at the LiCoO 2 /LiPON interface is caused by chemical changes rather than space charge effects. Finally, insights gained from this technique will shed light on important challenges of interfaces in all-solid-state energy storage and conversion systems and facilitate improved engineering of devices operated far from equilibrium.

25 ENERGY STORAGE↗

A Fluorination Method for Improving Cation-Disordered Rocksalt Cathode Performance

In Li-rich cation-disordered rocksalt oxide cathodes (DRX), partial fluorine substitution in the oxygen anion sublattice can increase the capacity contribution from transition-metal (TM) redox while reducing that from the less reversible oxygen redox. To date, limited fluorination substitution has been achieved by introducing LiF precursor during the solid-state synthesis. To take full advantage of the fluorination effect, however, a higher F content is desired. In the present study, the successful use of a fluorinated polymeric precursor is reported to increase the F solubility in DRX and the incorporation of F content up to 10–12.5 at% into the rocksalt lattice of a model Li-Mn-Nb-O (LMNO) system, largely exceeding the 7.5 at% limit achieved with LiF synthesis. Higher F content in the fluorinated-DRX (F-DRX) significantly improves electrochemical performance, with a reversible discharge capacity of ≈255 mAh g –1 achieved at 10 at% of F substitution. After 30 cycles, up to a 40% increase in capacity retention is achieved through the fluorination. Overall, the study demonstrates the feasibility of using a new and effective fluorination process to synthesize advanced DRX cathode materials.

25 ENERGY STORAGE↗

Quantum Magnetic Properties in Perovskite with Anderson Localized Artificial Spin‐1/2

Abstract Quantum magnetic properties in a geometrically frustrated lattice of spin‐1/2 magnet, such as quantum spin liquid or solid and the associated spin fractionalization, are considered key in developing a new phase of matter. The feasibility of observing the quantum magnetic properties, usually found in geometrically frustrated lattice of spin‐1/2 magnet, in a perovskite material with controlled disorder is demonstrated. It is found that the controlled chemical disorder, due to the chemical substitution of Ru ions by Co‐ions, in a simple perovskite CaRuO 3 creates a random prototype configuration of artificial spin‐1/2 that forms dimer pairs between the nearest and further away ions. The localization of the Co impurity in the Ru matrix is analyzed using the Anderson localization formulation. The dimers of artificial spin‐1/2, due to the localization of Co impurities, exhibit singlet‐to‐triplet excitation at low temperature without any ordered spin correlation. The localized gapped excitation evolves into a gapless quasi‐continuum as dimer pairs break and create freely fluctuating fractionalized spins at high temperature. Together, these properties hint at a new quantum magnetic state with strong resemblance to the resonance valence bond system.

74 ATOMIC AND MOLECULAR PHYSICS↗

From Linear Molecular Chains to Extended Polycyclic Networks: Polymerization of Dicyanoacetylene

Dicyanoacetylene (C 4 N 2 ) is an unusual energetic molecule with alternating triple and single bonds (think miniature, nitrogen-capped carbyne), which represents an interesting starting point for the transformation into extended carbon–nitrogen solids. While pressure-induced polymerization has been documented for a wide variety of related molecular solids, precise mechanistic details of reaction pathways are often poorly understood and the characterization of recovered products is typically incomplete. In this work, we study the high-pressure behavior of C 4 N 2 and demonstrate polymerization into a disordered carbon–nitrogen network that is recoverable to ambient conditions. The reaction proceeds via activation of linear molecules into buckled molecular chains, which spontaneously assemble into a polycyclic network that lacks long-range order. The recovered product was characterized using a variety of optical spectroscopies, X-ray methods, and theoretical simulations and is described as a predominately sp 2 network comprising “pyrrolic” and “pyridinic” rings with an overall tendency toward a two-dimensional structure. This understanding offers valuable mechanistic insights into design guidelines for next-generation carbon nitride materials with unique structures and compositions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determining the Conformation of an Adsorbed Br-PEG-Peptide by Long Period X-Ray Standing Wave Fluorescence

Long-period X-ray standing wave fluorescence (XSW) and X-ray reflectivity techniques are employed to probe the conformation of a Br-poly(ethylene glycol) (PEG)-peptide adsorbate at the hydrated interface of a polystyrene substrate. The Br atom on this Br-PEG-peptide construct serves as a marker atom allowing determination by XSW of its position and distribution with respect to the adsorption surface with angstrom resolution. Adsorption occurs on native or ion-beam-modified polystyrene films that are spin-coated onto a Si substrate and display either nonpolar or polar surfaces, respectively. A compact, oriented monolayer of Br-PEG-peptide can be formed with the peptide end adsorbed onto the polar surface and the PEG end terminating with the Br tag extending into the aqueous phase. The 108-141 {angstrom} distance of the Br atom from the polystyrene surface in this oriented monolayer is similar to the estimated {approx}150 {angstrom} length of the extended Br-PEG-peptide. This Br-polystyrene distance depends on adsorption time and surface properties prior to adsorption. Incomplete multilayers form on the polar surface after sufficient adsorption time elapses. By contrast, adsorption onto the nonpolar surface is submonolayer, patchy, and highly disordered with an isotropic Br distribution. Overall, this combination of X-ray surface scattering techniques with a novel sample preparation strategy has several advantages as a real space probe of adsorbed or covalently bound biomolecules at the liquid-solid interface.

59 BASIC BIOLOGICAL SCIENCES↗

Multiphase phase-field approach for solid–solid phase transformations via propagating interfacial phase in HMX

In this study, a thermodynamically consistent multiphase phase-field theory has been formulated to describe temperature-induced solid–solid phase transformations via an interfacial phase. This theory satisfies all thermodynamic equilibrium and stability conditions. It allows us to formulate the analytical solutions of the interface profile, energy, width, and velocity for each of the propagating solid–melt and solid–solid interfaces. The formation of the intermediate melt during solid–solid phase transformation has been studied hundreds of degrees below melting temperature in the HMX energetic crystal. The effect of the penalizing term in the phase-field model and two nanoscale material parameters on the appearance and degree of disordering of intermediate melt has been analyzed for the non-equilibrium interface. The developed approach is applicable to phase transitions in geological, pharmaceutical, ferroelectric, colloidal, and superhard materials where phase transformations occur via the intermediate phase.

Roy, Arunabha M. (ORCID:000000034790726X)↗

Phase separation and antisite defects in the thermoelectric TiNiSn half-Heusler alloys

The half-Heusler TiNiSn alloys have recently gained an attention as promising candidates for thermoelectric applications. Improvement of these alloys for such applications can be obtained by both electronic and compositional optimizations. The latter can result in a miscibility gap, allowing a phase separation in the nano-scale and consequently a thermal conductivity reduction. Combination of ab initio calculations and statistical thermodynamics was applied for studying the relative stability of a number of superstructures in TiNiSn based alloys. The quasi-binary phase diagram beyond T=0 K for TiNiSn–TiNi{sub 2}Sn solid solutions was calculated using energy parameters extracted from the total energy calculations for ordered structures in the Ni sublattice. We demonstrated that a decomposition of the off-stoichiometric Ni-rich half-Heusler alloy into the stoichiometric TiNiSn phase and into Ni deficient Heusler TiNi{sub 2}Sn phase occurs at elevated temperatures—an effect which recently had been observed experimentally. Furthermore, favorable energetic conditions for antisite defects formation were deduced, based on calculations of the energy of formation, an effect which was explained as a cooperative process of partial disordering on the Ni sublattice. The influence of these two effects on improvement of the thermoelectric performance of TiNiSn based half Heusler compounds is discussed. - Graphical abstract: Phase separation and antisite defects in the thermoelectric TiNiSn alloy, are covered as methods for nanostructuring and thereby enhancement of the thermoelectric potential. - Highlights: • Ab initio calculations/statistical thermodynamics was applied for studying the TiNiSn system. • The phase diagram for TiNiSn–TiNi{sub 2}Sn solid solutions was calculated. • Decomposition of the Ni-rich HH into TiNiSn and Ni deficient TiNi{sub 2}Sn phases was observed. • Favorable energetic conditions for antisite defects formation were deduced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stabilization of Ca1-dFe2-xMnxO4 (0.44 lt x lt 2) with CaFe2O4-type Structure and Ca2plus Defects in 1D Channels

Solid solutions of Ca{sub 1-{delta}}Fe{sub 2-x}Mn{sub x}O{sub 4} (0.45 {<=} x {<=} 2) were synthesized from CaCl{sub 2} as flux at 850 C in air. The entire series, even with x = 2, crystallizes in the CaFe{sub 2}O{sub 4}-type structure (Pnma), rather than in the CaMn{sub 2}O{sub 4}-type structure (Pbcm). Rietveld refinements confirmed mixed-valency Mn{sup 3+}/Mn{sup 4+} and a substantial level of Ca{sup 2+} deficiency ({delta} {approx} 0.25) at high x. With increasing x, the unit-cell dimensions a and b decrease, while that of c increases. Detailed structural analyses, together with Mn K-edge X-ray absorption and {sup 57}Fe Moessbauer spectroscopy studies, revealed that the stabilization of CaFe{sub 2}O{sub 4}-type structure, even at high values of x, is due to the existence of non-Jahn-Teller active Mn{sup 4+} (and Fe{sup 3+}), which is compensated by the formation of the Ca{sup 2+} deficiencies in the one-dimensional (1D) channels of Ca{sub 1-{delta}}Fe{sub 2-x}Mn{sub x}O{sub 4} during the flux synthesis. Antiferromagnetic (AFM) long-range ordering is achieved for all compounds at low temperature, because of strong AFM interactions between Mn{sup 3+}/Mn{sup 4+} and Fe{sup 3+}. In addition, a spin (or cluster) glass component was also observed, as expected, because of the extensive Mn/Fe structural and Mn{sup 3+}/Mn{sup 4+} charge disordering.

36 MATERIALS SCIENCE↗

Anomalous Self-Assembly and Ion Transport in Nanostructured Organic–Inorganic Solid Electrolytes

Nanostructured solid electrolytes containing ion-conducting domains and rigid non-conducting domains are obtained by block copolymer self-assembly. In this work, we report on the synthesis and characteristics of mixtures of a hybrid diblock copolymer with an organic and inorganic block: poly(ethylene oxide)-b-poly(acryloisobutyl polyhedral oligomeric silsesquioxane) (PEO-POSS) and a lithium salt. In the neat state, PEO-POSS exhibits a classical order-to-disorder transition upon heating.Dilute electrolytes exhibit a dramatic reversal; a disorder-to-order transition upon heating is obtained, indicating that the addition of salt fundamentally changes interactions between the organic and inorganic chains. At higher salt concentrations, the electrolytes primarily form a lamellar phase. Coexisting lamellae and cylinders are found at intermediate salt concentrations and high temperatures. The conductivity and shear modulus of PEO-POSS are significantly higher than that of an all organic block copolymer electrolyte with similar molecular weight and morphology, demonstrating that organic-inorganic block copolymers provide a promising route for developing the next generation of solid electrolytes for lithium batteries.

25 ENERGY STORAGE↗