Search NASA⌕ Search

SEARCH · Search NASA

Results for “experimental evolution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Microstructure-sensitive Crystal Viscoplasticity for Ni-base Superalloys Targeting Long-term Creep-Fatigue Interaction Modeling

This report introduces a new temperature-dependent, microstructure-sensitive crystal viscoplasticity model for single-crystal Ni-base superalloys. The model predicts the material response of the single-crystal components in the hot gas path sections of industrial gas turbines. The influence of changes in the microstructure that occur with aging in service, critical to predicting long-term creep-fatigue interactions, is embedded into the model through the γ' precipitate morphology evolution. The model is calibrated to predict the experimental response of CMSX-8, a lower cost variant of the second generation single-crystal superalloy CMSX-4. In addition, the experimentally-measured creep-fatigue and thermomechanical fatigue behavior of CMSX-8 is reported.

03 NATURAL GAS↗

Subcritical transition to turbulence in plane channel flows

A linear three dimensional mechanism for the transition of plane Poiseuille flows to turbulence is presented which provides good agreement with experimental observations. The mechanism is based on the evolution of states within a band of quasi-equilibria which slowly approach the stable upper branch solutions for the evolution of flow energy but which are strongly unstable to infinitesimal three-dimensional disturbances. Numerical simulation has shown that if two-dimensional flow persists long enough for the three-dimensional perturbations to attain finite amplitude, the resulting three dimensional flow quickly develops a turbulent character with nonperiodic behavior, and thus transition can be predicted from knowledge of the initial two- and three-dimensional energies and time scales. The mechanism predicts transition to turbulence at Reynolds numbers greater than 1000, as observed in experiments, and implies higher threshold three-dimensional energies in plane Couette flow.

Orszag, S. A.↗

SiC particles from asymptotic giant branch stars - Mg burning and the s-process

The question of whether isotopically anomalous SiC particles found in meteorites originate in AGB stars is addressed. It is shown that if the peak helium shell flash temperatures of massive (6-9 solar masses) stars are about 10 percent larger than they are normally assumed to be, alpha particle reactions with the magnesium will become significant. Then the (Mg-29)(alpha, n)Si-29 reaction produces a large excess of Si-29. With a light element nuclear reaction network, the evolution of the silicon isotopic composition during AGB evolution is calculated. It is found that the experimentally determined correlation between excess Si-29 and excess Si-30 in SiC particles from carbonaceous chondrites can indeed be naturally produced in this way. It is suggested that if the large isotopically anomalous SiC particles carrying nearly pure-process krypton and xenon do indeed originate in AGB stars, those stars were massive and had peak shell flash temperatures near 450 KM.

Brown, Lawrence E.↗

Multiple Mode Actuation of a Turbulent Jet

The effects of multiple mode periodic excitation on the evolution of a circular turbulent jet were studied experimentally. A short, wide-angle diffuser was attached to the jet exit. Streamwise and cross-stream excitations were introduced at the junction between the jet exit and the diffuser inlet on opposing sides of the jet. The introduction of high amplitude, periodic excitation in the streamwise direction enhances the mixing and promotes attachment of the jet shear-layer to the diffuser wall. Cross-stream excitation applied over a fraction of the jet circumference can deflect the jet away from the excitation slot. The two modes of excitation were combined using identical frequencies and varying the relative phase between the two actuators in search of an optimal response. It is shown that, for low and moderate periodic momentum input levels, the jet deflection angles depend strongly on the relative phase between the two actuators. Optimum performance is achieved when the phase difference is pi +/- pi/6. The lower effectiveness of the equal phase excitation is attributed to the generation of an azimuthally symmetric mode that does not produce the required non-axisymmetric vectoring. For high excitation levels, identical phase becomes more effective, while phase sensitivity decreases. An important finding was that with proper phase tuning, two unsteady actuators can be combined to obtain a non-linear response greater than the superposition of the individual effects.

Pack, LaTunia G.↗

Multiple Mode Actuation of a Turbulent Jet

The effects of multiple mode periodic excitation on the evolution of a circular turbulent jet were studied experimentally. A short, wide-angle diffuser was attached to the jet exit. Streamwise and cross-stream excitations were introduced at the junction between the jet exit and the diffuser inlet on opposing sides of the jet. The introduction of high amplitude, periodic excitation in the streamwise direction enhances the mixing and promotes attachment of the jet shear-layer to the diffuser wall. Cross-stream excitation applied over a fraction of the jet circumference can deflect the jet away from the excitation slot. The two modes of excitation were combined using identical frequencies and varying the relative phase between the two actuators in search of an optimal response. It is shown that, for low and moderate periodic momentum input levels, the jet deflection angles depend strongly on the relative phase between the two actuators. Optimum performance is achieved when the phase difference is pi +/- pi/6. The lower effectiveness of the equal phase excitation is attributed to the generation of an azimuthally symmetric mode that does not produce the required non-axisymmetric vectoring. For high excitation levels, identical phase becomes more effective, while phase sensitivity decreases. An important finding was that with proper phase tuning, two unsteady actuators can be combined to obtain a non-linear response greater than the superposition of the individual effects.

Pack, LaTunia G.↗

Development of a State Machine Sequencer for the Keck Interferometer: Evolution, Development and Lessons Learned using a CASE Tool Approach

This paper presents a discussion of the evolution of a sequencer from a simple EPICS (Experimental Physics and Industrial Control System) based sequencer into a complex implementation designed utilizing UML (Unified Modeling Language) methodologies and a CASE (Computer Aided Software Engineering) tool approach. The main purpose of the sequencer (called the IF Sequencer) is to provide overall control of the Keck Interferometer to enable science operations be carried out by a single operator (and/or observer). The interferometer links the two 10m telescopes of the W. M. Keck Observatory at Mauna Kea, Hawaii. The IF Sequencer is a high-level, multi-threaded, Hare1 finite state machine, software program designed to orchestrate several lower-level hardware and software hard real time subsystems that must perform their work in a specific and sequential order. The sequencing need not be done in hard real-time. Each state machine thread commands either a high-speed real-time multiple mode embedded controller via CORB A, or slower controllers via EPICS Channel Access interfaces. The overall operation of the system is simplified by the automation. The UML is discussed and our use of it to implement the sequencer is presented. The decision to use the Rhapsody product as our CASE tool is explained and reflected upon. Most importantly, a section on lessons learned is presented and the difficulty of integrating CASE tool automatically generated C++ code into a large control system consisting of multiple infrastructures is presented.

interferometer↗

Formation of Complex Organic Molecules (COMs) from Polycyclic Aromatic Hydrocarbons (PAHs): Top-Down Synthesis of organics in planetary systems

Complex, organic molecules have been found in many solar system objects (i.e., dust, comets, meteorites, moons, etc.); however, their origins and formation remain a mystery. Two chemical evolutionary pathways have been proposed to explain the organic inventory of our solar system. The first pathway, the top-down approach, suggests an interstellar (ISM) heritage whereby the organic material found in the solar system formed from the erosion and functionalization of large pre-solar carbon-bearing species (mainly large Polycyclic Aromatic Hydrocarbons or PAHs). The second pathway suggests that the origin of the Solar System prebiotic matter is the result of bottom-up synthesis from small reactive molecules (e.g., formaldehyde – H2CO, acetylene – H2C2, and similar species). In this second scenario, it is supposed that very few, if any, pre-solar large molecules could have survived due to the proto - solar nebula radiation environment. Polycyclic Aromatic Hydrocarbons or PAHs comprise ~20-30% of all available carbon in the Universe. The PAHs found within our Solar System tend to be smaller than those suspected to be in the ISM, comprised of only 14 to 18 carbon atoms in size whereas ISM PAHs are typically 50 to 100 carbon atoms. The disparity in PAH sizes between the ISM and Solar System environments is not understood, but may point to conversion of large ISM PAHs to Solar System Organics. This presentation details recent experiments regarding the stability of large PAHs to the various types of radiation found within a proto - solar disk and the production of smaller, complex, molecules from the degradation of the larger PAHs. The presentation will highlight differences and similarities in degradation products based on experimental conditions (e.g., radiation type) and discuss future work with a new experimental setup known as ICEE (Institute for Carbon Evolution Experiments).

molecukes↗

Three-Dimensional Measurement of the Crater Formation During Plume–Surface Interactions Using Stereo-Photogrammetry

The present investigation focused on adapting and validating stereo-photogrammetry for obtaining 3-D, time-resolved, non-intrusive, full-domain measurements of crater evolution during the plume-surface interaction (PSI) process. An atmospheric experimental facility was designed and constructed to facilitate the development of the stereo-photogrammetry technique for PSI applications. Stereo-photogrammetry was then used to measure the dynamic crater evolution process at nozzle heights of 25, 40, 55, and 70 nozzle diameters above the sand simulant bed. From the stereo-photogrammetry data, time-resolved 3-D reconstructions of the crater geometry were generated, and crater depth, radius, and volume time histories were extracted. Crater depth was observed to grow logarithmically for the two highest nozzle heights, and the depth growth rate for the lower two nozzle heights was more rapid. Crater volume growth was well characterized by a power law fit. The slope of the collapsed crater post nozzle flow was found to increase with nozzle height, along with the final crater volume. The results show that stereo-photogrammetry can be used to successfully measure the crater geometry in cases where optical access to the crater is not completely degraded by ejected particles.

DC Stubbs↗

Probing intermediate temperature heat release in autoignition of C3-C4 iso-alcohol/gasoline blends

In this work, we report an experimental and modeling study on the blending effects of C3–C4 iso-alcohols, namely iso-propanol and iso-butanol, on the characteristics of intermediate temperature heat release (ITHR) for a research-grade gasoline (FACE-F) in a rapid compression machine operating at diluted/stoichiometric fuel loading, compressed pressure of 43 bar, and compressed temperatures from 700 to 970 K. Changes in ITHR behavior are characterized through ITHR extent and evolution at 0 to 30 vol% iso-alcohol blending levels. Experimental observations reveal the strong promoting and decelerating effects on ITHR extent and evolution, respectively, within the low-temperature regime for both iso-alcohols, with stronger effects seen for iso-propanol; within the intermediate-temperature regime, the influence of both iso-alcohols diminishes greatly. Comprehensive chemical kinetic modeling is undertaken using a recently developed gasoline surrogate/alcohol model in conjunction with a five-component gasoline surrogate (FGF-LLNL), with good agreement obtained with the experiments for all the blends. Sensitivity, rate of production and flux analyses highlight the importance of chemical kinetic interactions via both fuel-specific and non-fuel-specific reactions. Disabling all the chemical kinetic interactions between iso-alcohol and FGF-LLNL in carbonated/non-fuel-specific species leads to somewhat extended ITHR duration and reduced ignition reactivity. Direct comparison between FGF-LLNL/iso-propanol and FGF-LLNL/iso-butanol blends is also made, where iso-propanol and iso-butanol are found to influence ITHR characteristics via significantly different chemical kinetic interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quench dynamics of two-component dipolar fermions subject to a quasiperiodic potential

Motivated by recent experiments in fermionic polar gases, we study the nonequilibrium dynamics of two-component dipolar fermions subject to a quasiperiodic potential. We investigate the localization of charge and spin degrees of freedom time evolving with a long-range spin-SU(2) symmetric fermionic Hamiltonian by calculating experimentally accessible dynamical observables. To study the nonequilibrium dynamics, we start the time evolution with two initial states at half-filling: (i) product state with doublons |↑↓0↑↓0↑↓0↑↓0↑↓$\rangle$ and (ii) product state with singlons |↑↓↑↓↑↓↑↓↑↓$\rangle$. We carried out the real-time evolution via the fermionic Hamiltonian using exact diagonalization (ED) and the time-dependent variational principle (TDVP) for finite matrix product states (MPS), within experimentally relevant timescales. For the product state with doublons, we observe a delocalized to localized phase transition varying disorder strengths by monitoring the decay of charge imbalance with time. For the long-range interacting Hamiltonian of our focus, and in the presence of strong enough disorder, starting the time evolution with singlons we find a strong reduction in the spin delocalization, contrary to results of previous studies using the disordered short-range (on-site) Hubbard model with SU(2) symmetry. In addition to the quench dynamics, we also demonstrate the localization of charge and spin in the full energy spectrum of the long-range spin-SU(2) symmetric Hamiltonian by monitoring spin and charge autocorrelation functions. Finally, our predictions for localization of both charge and spin should be observable in ultracold experiments with fermionic dipolar atoms subject to a quasiperiodic potential.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Co-designing Spectral Transformation Oracles with Hybrid Oscillator-Qubit Quantum Processors: From Algorithms to Compilation

We co-design a family of quantum eigenvalue transformation oracles that can be efficiently implemented on hybrid discrete- or continuous-variable (qubit or qumode) hardware. To illustrate the oracle’s representation-theoretic power and near-term experimental accessibility, we encode a Gaussian imaginary time-evolution spectral filter. As a result, we define a continuous linear combination of unitaries block encoding. Due to the ancillary qumode’s infinite-dimensional nature, continuous-variable qumodes constitute a powerful compilation tool for encoding continuous spectral functions without discretization errors while minimizing resource requirements. We then focus on the ubiquitous task of preparing eigenstates in quantum spin models. For completeness, we provide an end-to-end compilation which expresses high-level oracles in terms of an experimentally realizable instruction set architecture in both 1D and 2D. Finally, we examine the leading-order effects of physical errors and highlight open research directions. Our algorithms scale linearly with the spatial extent of the target system and are applicable to both near-term and large-scale quantum processors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Progressive Damage Analysis of Post-Buckled Stiffened Panels under Static Compressive Loading

The validation of progressive damage analysis methods requires experimental data that captures the initiation of damage, its evolution with continued loading, and the morphology of damage throughout its evolution. In support of the NASA Advanced Composites Project, several validation specimens of increasing complexity have been tested and characterized in order to provide the data required to assess the capabilities of several progressive damage analysis methods for fiber-reinforced composite materials. The analytical capabilities of interest for this validation program include networks of interacting matrix cracks and delaminations in post-buckled stiffened structures. A series of single stringer compression specimens was tested and characterized at NASA Langley Research Center. The experimental data from these tests are compared with progressive damage finite element analysis results. Test/analysis comparisons are made in terms of load/displacement histories, damage morphology, and damage size versus load metrics.

Frank A Leone↗

Magma oceanography. I - Thermal evolution

Fractional crystallization and flotation of cumulate plagioclase in a cooling 'magma ocean' provides the simplest explanation for early emplacement of a thick feldspar-rich lunar crust. The complementary mafic cumulates resulting from the differentiation of such a magma ocean have been identified as the ultimate source of mare basalt liquids on the basis or rare-earth abundance patterns and experimental petrology studies. A study is conducted concerning the thermal evolution of the early differentiation processes. A range of models of increasing sophistication are considered. The models developed contain the essence of the energetics and the time scale for magma ocean differentiation. Attention is given to constraints on a magma ocean, modeling procedures, single-component magma oceans, fractionating magma oceans, and evolving magma oceans.

Solomon, S. C.↗

Effect of heat treatment on microstructure and hardness of Grade 91 steel

The modified 9Cr-1Mo steel (Grade 91) is a material of choice in fossil-fuel-fired power plants with increased efficiency, service life, and reduction in emission of greenhouse gases. It is also considered a prospective material for the Next Generation Nuclear Power Plant for application in reactor pressure vessels at temperatures up to 650°C. In this paper, heat treatment of the modified 9Cr-1Mo steel was studied by normalizing and tempering the steel at various temperatures and times, with the ultimate goal of improving its creep resistance and optimizing material hardness. The microstructural evolution of the heat treated steels was correlated with the differential scanning calorimetric results. Optical microscopy, scanning and transmission electron microscopy in conjunction with microhardness profiles and calorimetric plots were used to understand the evolution of microstructure including precipitate structures in modified 9Cr-1Mo steel and relate it to the mechanical behavior of the steel. Thermo-CalcTM calculations were used to support experimental work and provide guidance in terms of the precipitate stability and microstructural evolution. Furthermore, the carbon isopleth and temperature dependencies of the volume fraction of different precipitates were constructed. The predicted and experimentally observed results were found to be in good agreement.

20 FOSSIL-FUELED POWER PLANTS↗

Study of Interfacial Interactions Using Thing Film Surface Modification: Radiation and Oxidation Effects in Materials

Interfaces play a key role in dictating the long-term stability of materials under the influence of radiation and high temperatures. For example, grain boundaries affect corrosion by way of providing kinetically favorable paths for elemental diffusion, but they can also act as sinks for defects and helium generated during irradiation. Likewise, the retention of high-temperature strength in nanostructured, oxide-dispersion strengthened steels depends strongly on the stoichiometric and physical stability of the (Y, Ti)-oxide particles/matrix interface under radiation and high temperatures. An understanding of these interfacial effects at a fundamental level is important for the development of materials for extreme environments of nuclear reactors. The goal of this project is to develop an understanding stability of interfaces by depositing thin films of materials on substrates followed by ion irradiation of the film-substrate system at elevated temperatures followed by post-irradiation oxidation treatments. Specifically, the research will be performed by depositing thin films of yttrium and titanium (~500 nm) on Fe-12%Cr binary alloy substrate. Y and Ti have been selected as thin-film materials because they form highly stable protective oxides layers. The Fe-12%Cr binary alloy has been selected because it is representative of ferritic steels that are widely used in nuclear systems. The absence of other alloying elements in this binary alloy would allow for a clearer examination of structures and compositions that evolve during high-temperature irradiations and oxidation treatments. The research is divided into four specific tasks: (1) sputter deposition of 500 nm thick films of Y and Ti on Fe-12%Cr alloy substrates, (2) ion irradiation of the film-substrate system with 2MeV protons to a dose of 2 dpa at temperatures of 300°C, 500°C, and 700°C, (3) oxidation of as-deposited and ion-irradiated samples in a controlled oxygen environment at 500°C and 700°C, (4) multi-scale computational modeling involving first- principle molecular dynamics (FPMD) and coarse-grained dissipative particle dynamics (DPD) approaches to develop theories underlying the evolution and stability of structures and phases. Samples from Tasks 1 to 3 (above) will be rigorously characterized and analyzed using scanning electron microscopy, Auger electron microscopy, x-ray diffraction, Rutherford back scatter spectroscopy, and transmission electron microscopy. Expected outcomes of the experimental work include a quantitative understanding film-substrate interface mixing, evolution of defects and other phases at the interface, interaction of interfaces with defects, and the ability of the Y and Ti films to mitigate irradiation-assisted oxidation.The aforementioned experimental work will be closely coupled with multi-scale molecular dynamics (MD) modeling to understand the reactions at the surface, the transport of oxidant through the thin film, and the stabilities of the deposited thin films under radiation and oxidation. Simulations of materials property changes under conditions of radiation and oxidation require multiple size domains and a different simulation scheme for each of these domains. This will be achieved by coupling the FPMD and coarse-grained kinetic Monte Carlo (KMC). This will enable the comparison of the results of each simulation approach with the experimental results.

36 MATERIALS SCIENCE↗

Modeling of deformation behavior and texture evolution in magnesium alloy using the intermediate $\phi$-model

The viscoplastic intermediate phi-model was applied in this work to predict the deformation behavior and texture evolution in a magnesium alloy, an HCP material. We simulated the deformation behavior with different intergranular interaction strengths and compared the predicted results with available experimental results. In this approach, elasticity is neglected and the plastic deformation mechanisms are assumed as a combination of crystallographic slip and twinning systems. Tests are performed for rolling (plane strain compression) of random textured Mg polycrystal as well as for tensile and compressive tests on rolled Mg sheets. Simulated texture evolutions agree well with experimental data. Activities of twinning and slip, predicted by the intermediate $\phi$-model, reveal the strong anisotropic behavior during tension and compression of rolled sheets.

$\phi$-Model↗

The Significance of the 'Insignificant': Non-covalent Interactions in CO 2 Reduction Reactions with 3C-TM (TM=Sc-Zn) Single-Atom Catalysts

With energy shortages and excessive CO 2 emissions driving climate change, converting CO 2 into high-value-added products offers a promising solution for carbon recycling. We investigate CO 2 reduction reactions (CO2RR) catalyzed by 10 single-atom catalysts (SACs), incorporating weak non-covalent interactions, specifically lone pair-π and H-π interactions. The SACs, consisting of transition metals coordinated by three carbon atoms in a defective graphene substrate (3C-TM, TM=Sc-Zn), leverage these interactions to influence the energy fluctuations of intermediates and the limiting potentials of CO 2 RR, without altering the overall reaction pathway. Further, our findings show that SACs based on early transition metals (Sc, Ti, V, Cr) can serve as catalysts for C 1 products, including HCOOH, HCHO, CH 3 OH, and CH 4 , while those based on Fe and Co are suitable for CO formation. Driving force analysis helps bridge theoretical results with experimental observations and propose a modified approach for assessing hydrogen evolution reactions (HER) competition. SACs based on Ni and Cu exhibit moderate HER tolerance, while early transition metals excel in selective CO 2 reduction. We also identify a linear scaling relationship between the free energies of *COOH and *CO. This study offers valuable insights for future experimental studies and large-scale computational screenings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗