Search NASA⌕ Search

SEARCH · Search NASA

Results for “map interpretation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Experimental characterization and constitutive modeling of the mechanical behavior of molybdenum under electromagnetically applied compression-shear ramp loading

Magnetically applied pressure-shear (MAPS) is a new experimental technique that provides a platform for direct measurement of material strength at extreme pressures. The technique employs an imposed quasi-static magnetic field and a pulsed power generator that produces an intense current on a planar driver panel, which in turn generates high amplitude magnetically induced longitudinal compression and transverse shear waves into a planar sample mounted on the drive panel. In order to apply sufficiently high shear traction to the test sample, a high strength material must be used for the drive panel. Molybdenum is a potential driver material for the MAPS experiment because of its high yield strength and sufficient electrical conductivity. To properly interpret the results and gain useful information from the experiments, it is critical to have a good understanding and a predictive capability of the mechanical response of the driver. In this work, the inelastic behavior of molybdenum under uniaxial compression and biaxial compression-shear ramp loading conditions is experimentally characterized. It is observed that an imposed uniaxial magnetic field ramped to approximately 10 T through a period of approximately 2500 μs and held near the peak for about 250 μs before being tested appears to anneal the molybdenum panel. In order to provide a physical basis for model development, a general theoretical framework that incorporates electromagnetic loading and the coupling between the imposed field and the inelasticity of molybdenum was developed. Based on this framework, a multi-axial continuum model for molybdenum under electromagnetic loading is presented. The model reasonably captures all of the material characteristics displayed by the experimental data obtained from various experimental configurations. Additionally, data generated from shear loading provide invaluable information not only for validating but also for guiding the development of the material model for multiaxial loadings.

36 MATERIALS SCIENCE↗

Optimizing Alabama’s CO 2 Storage in Shelby County (Project OASIS): Task 4.0 Deliverable – Geologic Analysis Report

Project OASIS (Optimizing Alabama’s CO 2 Storage in Shelby County) is a geologic and reservoir characterization study designed to evaluate deep saline formations for potential long-term carbon dioxide (CO 2 ) storage in central Alabama near the National Carbon Capture Center (NCCC) and Alabama Power’s Plant Gaston. The project centers on the Cambro-Ordovician Knox Group and underlying strata such as the Conasauga and Rome Formations, which were investigated through the drilling of two stratigraphic test wells to obtain electronic well logs, core, and sidewall core plugs. These data provide direct measurements of porosity, permeability, and lithologic variability critical for reservoir characterization. Complementing the well program, a limited 2D seismic survey was acquired to help select the site for Westover #2, and a more regional Seismic Exchange (SEI) seismic survey was licensed and interpreted to define structural and stratigraphic frameworks in a new Static Earth Model (SEM), map reservoir continuity, and identify potential sealing intervals. Integrated with geologic and reservoir modeling, these datasets form the basis for evaluating storage capacity, injectivity, and containment.

20 FOSSIL-FUELED POWER PLANTS↗

Optimizing Alabama’s CO 2 Storage in Shelby County (Project OASIS): Task 6.0 Deliverable – CarbonSAFE Phase III Readiness

The OASIS CarbonSAFE Phase II Project OASIS (Optimizing Alabama’s CO 2 Storage in Shelby County) is a geologic and reservoir characterization study designed to evaluate deep saline formations for potential long-term carbon dioxide (CO 2 ) storage in central Alabama near the National Carbon Capture Center (NCCC) and Alabama Power’s Plant Gaston. The project centers on understanding the potential of the Cambro-Ordovician Knox Group and underlying strata such as the Conasauga and Rome Formations for geologic storage of CO 2 . These formations were investigated as part of SECARB-USA (DE-FE0031830) and Project OASIS through the drilling of two stratigraphic test wells to obtain electronic well logs, core, and sidewall core plugs. These data provide direct measurements of porosity, permeability, and lithologic variability critical for reservoir characterization. Complementing the well program, a limited 2D seismic survey was conducted to help select the site for Westover #2 as part of SECARB-USA (DE-FE0031830), and a more regional Seismic Exchange (SEI) seismic survey was licensed and interpreted to define structural and stratigraphic frameworks in a new Static Earth Model (SEM), map reservoir continuity, and to identify potential sealing intervals. Integrated with geologic and reservoir modeling, these datasets form the basis for evaluating storage capacity, injectivity, and containment. While this document endeavors to provide readers with a high-level overview of Project OASIS activities and its suitability for subsequent CarbonSAFE Phases, such as a Phase III effort. Other project deliverables and milestones will provide more details on individual subjects.

20 FOSSIL-FUELED POWER PLANTS↗

The emission-line velocity field in M82.

A slit-spectrum study of the apparent velocity field in the peculiar galaxy M82 (NGC 3034) has been completed. Velocity curves were measured from the emission lines of H-alpha, forbidden N II, and forbidden S II, and a contour map of the emission-line velocity field has been constructed. The observations are interpreted from the standpoint that either (1) the radiation which we see in the direction of the filamentary structure is intrinsic to the filaments or, more likely, (2) the radiation originates at the apparent optical nucleus and is subsequently scattered by dust in the filaments. The conclusion is reached that the ejected material, which is probably expanding away from the central region of the galaxy, must have velocity components which are not directed radially with respect to the apparent optical nucleus. The observations imply that the expanding cloud of ejecta is rotating about an axis roughly perpendicular to the fundamental plane of the galaxy even at distances as large as 45 arc seconds from the apparent nucleus of the galaxy.

Heckathorn, H. M.↗

Analysis of ERTS-1 imagery of Wyoming and its application to evaluation of Wyoming's natural resources

The author has identified the following significant results. The Wyoming investigation has progressed according to schedule during the Jan. - Feb., 1973 report period. A map of the maximum extent of Pleistocene glaciation was compiled for northwest Wyoming from interpretations of glacial features seen on ERTS-1 imagery. Using isodensitometry as a tool for image enhancement, techniques were developed which allowed accurate delineation of small urban areas and provided distinction of broad classifications within these small urban centers.

Marrs, R. W.↗

Map synchronization in optical communication systems

The time synchronization problem in an optical communication system is approached as a problem of estimating the arrival time (delay variable) of a known transmitted field. Maximum aposteriori (MAP) estimation procedures are used to generate optimal estimators, with emphasis placed on their interpretation as a practical system device, Estimation variances are used to aid in the design of the transmitter signals for best synchronization. Extension is made to systems that perform separate acquisition and tracking operations during synchronization. The closely allied problem of maintaining timing during pulse position modulation is also considered. The results have obvious application to optical radar and ranging systems, as well as the time synchronization problem.

Gagliardi, R. M.↗

Radiation balance mapping with multispectral scanner data.

Energy budget and radiation balance relationships have been measured from the ground by investigators in several disciplines. Airborne and spaceborne multispectral sensors provide a new measurement capability for large-area synoptic mapping of these quantities. Procedures for estimating and mapping total exitance and radiation balance from multispectral scanner data are discussed, and example maps for an agricultural application are presented. This information extraction technique is an extension of the usual recognition mapping performed with multispectral scanner data, and represents a first step in the quantitative interpretation and assessment of surface conditions with remote sensor data.

Malila, W. A.↗

Geochemical and geological units of Mare Humorum - Definition using remote sensing and lunar sample information

Mare Humorum has been found to contain at least nine distinct units. Mare basalt units typical of those at the Apollo 12 and 15 sites and central Mare Serenitatis exist also in Mare Humorum, but the early, high-titanium basalts typical of Mare Tranquillitatis and southeast Mare Serenitatis are absent. Basalts containing about 5% TiO2, not sampled at any Apollo site, also are found in Mare Humorum. Emplacement of extensive low-titanium basalts occurred in Mare Humorum in roughly the same period as emplacement of similar basalts at Apollo 12 and central Mare Serenitatis. These were followed by emplacement of the higher titanium basalts during a later period. These and other units are characterized and their extent mapped using a combination of remote sensing and Apollo sample studies. The results are interpreted in the context of the evolution of the Humorum region.

Pieters, C.↗

Remote sensing as a tool for estimating soil erosion potential

The Universal Soil Loss Equation is a frequently used methodology for estimating soil erosion potential. The Universal Soil Loss Equation requires a variety of types of geographic information (e.g. topographic slope, soil erodibility, land use, crop type, and soil conservation practice) in order to function. This information is traditionally gathered from topographic maps, soil surveys, field surveys, and interviews with farmers. Remote sensing data sources and interpretation techniques provide an alternative method for collecting information regarding land use, crop type, and soil conservation practice. Airphoto interpretation techniques and medium altitude, multi-date color and color infrared positive transparencies (70mm) were utilized in this study to determine their effectiveness for gathering the desired land use/land cover data. Successful results were obtained within the test site, a 6136 hectare watershed in Dane County, Wisconsin.

Morris-Jones, D. R.↗

Discrimination of unique biological communities in the Mississippi lignite belt

Small scale hardcopy LANDSAT prints were manually interpreted and color infrared aerial photography was obtained in an effort to identify and map large contiguous areas of old growth hardwood stands within Mississippi's lignite belt which do not exhibit signs of recent disturbance by agriculture, grazing, timber harvesting, fire, or any natural catastrophe, and which may, therefore, contain unique or historical ecological habitat types. An information system using land cover classes derived from digital LANDSAT data and containing information on geology, hydrology, soils, and cultural activities was developed. Using computer-assisted land cover classifications, all hardwood remnants in the study area which are subject to possible disturbance from surface mining were determined. Twelve rare plants were also identified by botanists.

Miller, W. F.↗

The use of LANDSAT data to monitor the urban growth of Sao Paulo Metropolitan area

Urban growth from 1977 to 1979 of the region between Billings and the Guarapiranga reservoir was mapped and the problematic urban areas identified using several LANDSAT products. Visual and automatic interpretation techniques were applied to the data. Computer compatible tapes of LANDSAT multispectral scanner data were analyzed through the maximum likelihood Gaussian algorithm. The feasibility of monitoring fast urban growth by remote sensing techniques for efficient urban planning and control is demonstrated.

Dejesusparada, N.↗

Study of LANDSAT-D thematic mapper performance as applied to hydrocarbon exploration

Analysis of the tapes of the Detroit, Michigan scene, which were received in fully processed format with geometric and radiometric correction, shows evidence of an along line data slip every sixteenth line in TM channel 2. Very large scale products were therefore generated in false color using channels 1, 3, and 4. Subjective evaluation of these enhanced scenes indicates that they are acceptable for interpretation at scales up to 1:50,000 and should be useful for change mapping probably up to 1:24,000 scale. The significant striping visible in water bodies for both the natural color and false color products indicates that the detector calibration is probably performing below the preflight specification. Variance-covariance matrices were computed and principal component analysis were performed for a set of 512 x 512 windows within the Arkansas scene. Initial analysis shows the shortwave infrared channels (TM 5 and 6) are a highly significant data source. The thermal channel (TM 7) shows negative correlation with TM 1 through 4.

Source record↗

Mars - Stratigraphy and gravimetry of Olympus Mons and its aureole

The relative ages of the major geologic units on and around Olympus Mons are considered, together with an interpretation of the gravity anomaly found for this area. The crater data for this investigation have been acquired and interpreted according to the method outlined by Neukum and Hiller (1981). After careful geological mapping, craters clearly identified as impacts are measured and counted. Crater frequency values per sq km for craters greater than or equal to 1 km ('crater retention ages') are read from the individual counts by fitting the Martian cumulative crater production size-frequency distribution to the individual counts. In addition to age dating, the problem of the origin and nature of the aureole materials using gravity data is addressed. This is done by determining whether the line-of-sight gravity extending from Olympus Mons to the northwestern part of the aureole can be explained by the aureole masses alone or whether additional high-density intrusive masses must be assumed in the aureola area.

Hiller, K. H.↗

LANDSAT 4 investigations of Thematic Mapper and Multispectral Scanner applications

Structural and stratigraphic characteristics of the Drum Mountains in Utah were obtained using LANDSAT 5 TM data that were digitally enhanced using band ratioing, principal components analysis, and spatial filtering techniques. Color ratioing composite images proved most useful for distinguishing between and identifying exposure of hyroxly bearing hydrothermally altered inclusive rocks and bleached contact metamorphic rocks dominated by calc-silicate mineral assemblages. The amount and detail of geologic information interpreted from TM images is more significant than that from MSS and in geologic maps. Enhanced LANDSAT 5 TM data also identified and mapped hydrothermal alteration and distinguished between altered and unaltered limonitic assemblages in the Tonopath, Nevada quadrangle.

Lauer, D. T.↗

Late Tertiary and Quaternary river systems of the eastern Sahara as mapped on shuttle radar and LANDSAT images

SIR-A pictures of the Eastern Sahara show segments of what are interpreted as relics of once major Tertiary and Quaternary stream valleys. These previously unmapped features have a dark to very dark radar response and are generally concealed below a thin cover of flat to slightly undulating deposits, mostly of eolian origin. In most of the 150 pits and trenches we have studied to date, unconsolidated surface deposits range from a few centimeters to about a meter thick. The SIR-A system was able to "see through" this loose, dry material, to a depth of about a meter or two.

Mccauley, J. F.↗

Patterns of vegetation in the Owens Valley, California

Spectral characteristics of semi-arid shrub communities were examined using Airborne Imaging Spectrometer (AIS) data collected in the tree mode on 23 May 1985. Mesic sites with relatively high vegetation density and distinct zonation patterns exhibited greater spectral signature variations than sites with more xeric shrub communities. Spectral signature patterns were not directly related to vegetation density or physiognomy, although spatial maps derived from an 8-channel maximum likelihood classification were supported by photo-interpreted surface features. In AIS data, the principal detected effect of shrub vegetation on the alluvial fans is to lower reflectance across the spectrum. These results are similar to those reported during a period of minimal physiological activity in autumn, indicating that shadows cast by vegetation canopies are an important element of soil-vegetation interaction under conditions of relatively low canopy cover.

Ustin, S. L.↗

Areal and time distributions of volcanic formations on Mars

The analysis of igneous rock distribution has been fulfilled on the basis of the geomorphological map of Mars at scale 1:5,000,000, according to data obtained from interpretation of 1:2,000,000 scale pictures of Mariner 9, Mars 4, Mars 5, Viking 1 and 2. Areological areas are listed as having been distinguished as the stratigraphic basis for a martian time scale. The area of volcanic eruptions and the number of eruptive centers are calculated on 10 x 10 deg cells and for each areological eras. The largest area of eruptive happening at different times is related with Tharsis tectonic uplift. The study of distribution of igneous rock area and volcanic centers number on 10 deg sectors and zones revealed the concentration belts of volcanic formations.

Katterfeld, G. N.↗