Search NASA⌕ Search

SEARCH · Search NASA

Results for “multi scale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Influence of Global Climate on Freshwater Changes in Africa’s Largest Endorheic Basin Using Multi-Scaled Indicators

The poor investments in gauge measurements for hydro-climatic research in Africa has necessitated the need to investigate how decision makers can leverage on sophisticated spaceborne measurements to improve knowledge on surface water hydrology that can feed directly into water accounting processes and risk assessment from extreme droughts and its impacts. To demonstrate such potential, a suite of satellite earth observations (Sentinel-2, altimetry, Landsat, GRACE, and TRMM) and model data are combined with the standardized precipitation evapotranspiration index to assess the impacts of global climate on freshwater dynamics over the LCB (Lake Chad basin), Africa’s largest endorheic basin. As shown in the results of this study, the significant relationship of climate modes (AMO; r = 0.68 and 0.59; and AMM; r = 0.2 and 0.47) with drought patterns in the LCB highlights the evidence of global climate influence in the region. The significant declines in drought extents and their intensities (2004 - 2015) over LCB coincide with the rise in surface water extent of the Lake Chad during the same period. Change detection analysis of open water features in the southern pool of Lake Chad during the 2015 - 2019 period shows that on the average, only 28.4% of inundated areas within the vicinity of the Lake persisted during the period. While the association of terrestrial water storage (TWS) with model-derived surface water storage (SWS) is strongest (r = 0.89) in the catchments that provide the most nourishment to the Lake Chad, the relationship of rainfall (2002 - 2017) with TWS (r = 0.85), model TWS (r = 0.87) and SWS (r = 0.88) confirm that the LCB’s hydrology is predominantly climate-driven. This notion is further reinforced as the predicted SWS over the LCB using a support vector machine regression scheme was found to be strongly correlated (r = 0.95 at = 0.05) with observed SWS.

Sentinel-2↗

BLOOD-BASED MULTI-SCALE MODEL FOR CANCER RISK FROM GCR IN GENETICALLY DIVERSE POPULATIONS

OBJECTIVES AND METHODS This project addresses the challenge of understanding and predicting individual radiation sensitivity by integrating genetics, demographics and biomarker characteristics across species (mice and humans). We hypothesize that ex vivo DNA repair response to GCR components is a central determinant of cancer risk from space radiation and can serve as a biomarker of radiation risk in combination with genetics. Automated image quantification of 53BP1+ radiation-induced foci (RIF) during the first 4-48 h post-irradiation was performed as a function of dose and LET in non-immortalized primary skin fibroblasts derived from 76 mice across 15 strains (5 inbred reference strains and 10 collaborative-cross strains) exposed to X rays (0.1, 1 and 4 Gy), 350 MeV/n 40Ar and 600 MeV/n 56Fe (1.1 and 3 particles/100μm2), as well as in peripheral blood mononuclear cells (PBMCs) from 768 healthy donors (matched ethnicity, 50/50 male/female, 18-70 years old) exposed to gamma rays (0.1 and 1 Gy), 350 MeV/n 28Si, 350 MeV/n 40Ar and 600 MeV/n 56Fe (1.1 and 3 particles/100μm2). QUANTIFICATION OF 53BP1+ FOCI IN VITRO AND ASSOCIATIONS TO IN VIVO RADIATION SUSCEPTIBILITY IN 15 MOUSE STRAINS We reported in vitro repair kinetic and repairable fractions of RIF for the 15 mouse strains and introduced a mathematical model for RIF as a function of time, dose and LET. We noted that the metabolic activity of cells modulates the RIF response, and we introduced the open access tool terRIFic (Tool for Enhanced Results of RIF In Cells, https://radbiolab.shinyapps.io/terrific/) to correct for such bias using confluence level. Notably, at 4h post-irradiation, RIF/Gy decreased with dose or LET: as the dose or LET increases, so does the proximity of DNA double-strand-breaks (DSB) and our data suggest that proximal DSBs are brought together inside isolated RIF for repair. The RIF/Gy trend was inverted at 24h, suggesting RIF with high DSB content are more difficult to repair. We showed that in vitro metrics correlate with in vivo measurements in the same 15 mouse strains, such as survival levels of immune cells or spontaneous cancer incidence, suggesting a relationship between the efficiency of DSB repair and cancer risk or radiation toxicity. In addition to the efficiency of repair and persistent RIF, the amount of spontaneous foci before irradiation was also found to be strain dependent. Finally, we performed genome-wide association study in the same 15 mouse strains using all RIF phenotypes measured in vitro, identifying genes of interest and validating RIF as an ideal biomarker for individual radiation sensitivity. BASELINE 53BP1+ FOCI PREDICTS INDIVIDUAL HUMAN RESPONSE TO GCR COMPONENTS Based on the analysis of radiation responses of 576 donor PBMCs (using quantification of 53BP1+ foci, oxidative stress and cell death), we observed a wide variability of subject- and LET-dependent radiation responses, with radiation-induced DNA repair foci increasing with LET, though oxidative stress being notably reduced by high-LET irradiation, potentially due to a switch between hydrogen peroxide and oxygen radical-based mechanisms. We identified a relationship between few spontaneous DNA foci at baseline and increased DNA repair after irradiation, accompanied by an alteration in immunoregulatory cytokine secretion, which might be adapted as biomarkers to predict ionizing radiation sensitivity. Among demographic variables, only latent cytomegalovirus infection and age were predictive of high baseline foci formation. Finally, we have performed low-throughput whole genome sequencing of all samples and are currently in the process of identifying the genes and pathways associated with low and high-LET ionizing radiation sensitivity in humans.

53BP1↗

A Multi-scaled Analysis of Forest Structure using Individual-Based Modeling in a Costa Rican Rainforest

Consideration of scale is essential when examining structural relationships in forests. In this study, we present a parameterization of the FORMIND individual-based forest model for old growth Atlantic lowland rainforest in La Selva, Costa Rica. Results show that the simulated forest reproduces the structural complexity of Costa Rican rainforest within 2.3% of aboveground biomass values, based on comparisons with CARBONO inventory plot data. The Costa Rica FORMIND simulation was then used to investigate the relationship between canopy height and aboveground biomass (AGB), leaf area index (LAI) and gross primary productivity (GPP) at different spatial scales (20 × 20 m, 60 × 60 m, 100mx100m). The relationship between aboveground biomass and height is of particular importance toward the calibration of various remote sensing products including lidar and radar, whereas the LAI and GPP relationships are understudied in this context. We found that the relationship between all three variables and height varies considerably: the relationship is stronger at finer scales and weaker at coarser resolution. However, in all three comparisons, RMSE also decreased as scales coarsened, with the largest difference shown between 100 m and 10 m resolutions in relating AGB to Lorey's height (R^2 decreased by 0.3; RMSE decreased by 114.5 Mg/ha). This suggests that a trade-off between accuracy and precision exists, and further highlights the importance of spatial scale in determining the relatability of forest structure variables.

A.H.Armstrong↗

Multi-Scale Analysis of Effective Mechanical Properties of 3D Woven Composite Materials

This work aims to compute and analyze the mechanical properties of 3D woven composite materials that share the same yarn structure but differ in their matrix porosity and fiber volume fraction. Assuming linear elastic behavior, the software PuMA, developed at NASA, was used to characterize the different composites from their constituents' data averaging their elastic properties in three main directions to obtain their effective orthotropic mechanical properties. This was performed in three steps: firstly, the different phases (yarns/matrix) were analyzed as anisotropic materials separately at the micro-scale; then, the results from these analyses were homogenized and used to obtain the anisotropic elasticity tensor at the meso-scale for the different woven materials; and finally, assuming orthotropic mechanical behavior for the unit cell the mechanical properties were obtained at the macro-scale. The 3D woven composite materials selected for this study are made of phenolic resin with porosity values between 0 and 0.6, and resin infiltrated carbon fiber with volume fractions between 0.5 and 0.9 for the yarns. Results from PuMA were validated with external FEA simulations for the non-porous 3D woven material with a fiber volume fraction of 0.9 in the yarns. Results will be included in the final paper after completing the study detailed in Section II.

Sergio Fraile Izquierdo↗

Magnetospheric Multi Scale (MMS) Patching Story for DARPA AMP Collaboration

NASA’s Magnetospheric Multiscale (MMS) spacecraft are part of a robotic space mission that studies the Earth's magnetosphere. Launched in March 2015, MMS consists of four identical spacecraft that fly in a tetrahedral formation. The spacecraft gather information about the microphysics of magnetic reconnection including turbulence and energetic particle acceleration ⁠—processes common in many astrophysical plasmas.

Gilberto Alves Vicente↗

Multi-Scale Analysis of Effective Mechanical Properties of Porous 3D Woven Composite Materials

This work aims to compute and analyze the mechanical properties of 3D woven composite materials that share the same yarn structure but differ in their matrix porosity and yarn's fiber volume fraction. Assuming linear elastic behavior, NASA's PuMA software was used to characterize the different composites from their constituents' data, averaging their elastic properties in three main directions to obtain their effective orthotropic mechanical properties. This was performed in three steps: firstly, the porous matrix phase was analyzed at the micro-scale; then, these results were used, along with the mechanical properties of the fibers, to model the yarns at the meso-scale; finally, results from the constituents were homogenized and used to model the mechanical behavior of the unit cell at the macro-scale. The 3D woven composite materials selected for this study are made of a mixture of phenolic resin with porosity values between 0 and 0.6, and infiltrated carbon fiber yarns with fiber volume fractions between 0.5 and 0.8. Results from this study show the effect of different matrix porosities and fiber volume fractions on the macro-scale mechanical properties, and were validated through theoretical and semi-empirical expressions found in the literature.

3D woven materials↗

Characteristics of Multi-scale Current Sheets in the Solar Wind at 1 au Associated with Magnetic Reconnection and the Case for a Heliospheric Current Sheet Avalanche

Wind spacecraft measurements are analyzed to obtain a current sheet (CS) normal width dcs-distribution of 3374 confirmed magnetic reconnection exhausts in the ecliptic plane of the solar wind at 1 AU. The dcs-distribution displays a nearly exponential decay from a peak at dcs=25 di to a median at dcs=85 di and a 95th percentile at dcs=905 di with a maximum exhaust width at dcs=8077 di. A magnetic field ϴ-rotation angle distribution increases linearly from a relatively few high-shear events toward a broad peak at 35o<ϴ<65o. The azimuthal φ-angles of the CS normal directions of 430 thick dcs≥500 di exhausts are consistent with a dominant Parker-spiral magnetic field and a CS normal along the ortho-Parker direction. The CS normal orientations of 370 kinetic-scale dcs<25 di exhausts are isotropic in contrast, and likely associated with Alfvénic solar wind turbulence. We propose that the alignment of exhaust normal directions from narrow dcs~15-25 di widths to well beyond dcs~500 di with an ortho-Parker azimuthal direction of a large-scale HCS is a consequence of CS bifurcation and turbulence within the HCS exhaust that may trigger reconnection of the adjacent pair of bifurcated CSs. The proposed HCS-31 avalanche scenario suggests that the underlying large-scale parent HCS closer to the Sun evolves with heliocentric distance to fracture into many, more or less aligned, secondary current sheets due to reconnection. A few wide exhaust-associated HCS-like CSs could represent a population of HCSs that failed to reconnect as frequently between the Sun and 1 AU as other HCSs.

Stefan Eriksson↗

Multi-Scale Analysis of an Ilmenite Microcrater in Lunar Sample 71055

Micrometeorite impacts are a key space weathering process on the lunar surface, generating a variety of physical and chemical changes in the lunar regolith. Several experiments using nanosecond pulsed lasers to simulate micrometeorite impact have been published in the past two decades, providing a wealth of knowledge, including how minerals vary in their response to laser irradiation. Although these experiments have produced many features analogous to those observed in natural samples, none could be attributed to the passage of a shock wave, resulting instead from hot ablation. Recent femtosecond laser irradiation of olivine and enstatite have more accurately reproduced the shock textures observed in lunar samples, improving our ability to coordinate experimental and lunar sample data. Both pulsed laser experiments and studies of lunar impact craters have focused on silicates, as they comprise the bulk of the regolith. Ilmenite (FeTiO 3 ) is the most abundant opaque mineral in lunar rocks and an important sink of solar wind implanted helium. Ilmenite is known to vary in its response to radiation processing relative to the silicates, but its response to micrometeorite impact has not yet been studied in natural samples nor in the laboratory. In this investigation, we characterize an ilmenite microcrater using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) to learn how ilmenite responds to impact and if there are implications for helium cycling in the regolith.

B A Cymes↗