Search NASA⌕ Search

SEARCH · Search NASA

Results for “oxide interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Correlated memory resistor in epitaxial NdNiO{sub 3} heterostructures with asymmetrical proton concentration

The electronic devices using correlated transition metal oxides are the promising candidates to overcome the limitation of the current electronics due to the rich electronic phases and the extreme sensitivities. Here, we report proton-based resistive switching memory that uses correlated oxides, i.e., epitaxial NdNiO{sub 3} heterostructure with asymmetrical concentration of protons (H{sup +}) to obtain multilevel states. By designing such metal-NdNiO{sub 3}-metal device structures with asymmetrical proton concentration, we demonstrate that the correlated oxides exhibit resistive switching by ionic transport of protons at the metal-hydrogenated NdNiO{sub 3} (H-NNO) interface. This finding will guide the development of energy-efficient switching devices for non-volatile memory and neuromorphic applications.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High-temperature oxidation/corrosion of iron-based superalloys

The oxidation and sulfidation of several novel iron-base superalloys were evaluated in high-temperature cyclic tests. The experimental austenitic alloys examined were modifications of NASAUT-4GA which were developed for Stirling-engine application. The weight gains and resulting surface scales were measured and analyzed. Mixed oxide scales were found to form on all specimens exposed above 871 C. The build-up of these scales led to a depletion of Mn and Cr in a zone adjacent to the oxides. In addition, the initial oxidation of the Fe-rich alloy was inhibited by a thin but tenacious Si layer which formed at the interface between oxides and the parent layer. Sulfidation tests using Na2SO4 coatings resulted in the formation of a protective spinel and alpha-Fe2O3 phases. Preferential attack of the carbide phase by hydrogen was not observed after 350 h at 871 C.

Lemkey, F. D.↗

Magnetic interaction at an interface between manganite and other transition-metal oxides

A general consideration is presented for the magnetic interaction at an interface between a perovskite manganite and other transition-metal (TM) oxides. The latter is specified by the electron number $n$ in the $d_{3z^2-r^2}$ level as $(d_{3z^2-r^2})^n$. Based on the molecular orbitals formed at the interface and the generalized Hund's rule, the sign of the magnetic interaction is rather uniquely determined. The exception is when the $d_{3z^2-r^2}$ orbital is stabilized in the interfacial manganite layer neighboring to a $(d_{3z^2-r^2})^1$ or $(d_{3z^2-r^2})^2$ system. In this case, the magnetic interaction is sensitive to the occupancy of the Mn $d_{3z^2-r2}$ orbital. It is also shown that the magnetic interaction between the interfacial Mn layer and the bulk region can be changed. Manganite-based heterostructures thus show a rich magnetic behavior. We also present how to generalize the argument including $t_{2g}$ orbitals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

p-Type Transparent Conducting Oxide/n-Type Semiconductor Heterojunctions for Efficient and Stable Solar Water Oxidation

Achieving stable operation of photoanodes used as components of solar water splitting devices is essential to realizing the promise of this renewable energy technology. It is demonstrated that p-type transparent conducting oxides (p-TCOs) can function both as a selective hole contact and corrosion protection layer for photoanodes used in light-driven water oxidation. Using NiCo 2 O 4 as the p-TCO and n-type Si as a prototypical light absorber, a rectifying heterojunction capable of light driven water oxidation was created. By placing the charge separating junction in the Si using a np + structure and by incorporating a highly active heterogeneous Ni-Fe oxygen evolution catalyst, efficient light-driven water oxidation can be achieved. In this structure, oxygen evolution under AM 1.5 G illumination occurs at 0.95 V vs RHE, and the current density at the reversible potential for water oxidation (1.23 V vs RHE) is >25 mA cm -2 . Stable operation was confirmed by observing a constant current density over 72 h and by sensitive measurements of corrosion products in the electrolyte. In situ Raman spectroscopy was employed to investigate structural transformation of NiCo 2 O 4 during electrochemical oxidation. The interface among the light absorber and p-TCO is crucial to produce selective hole conduction to the surface under illumination. For example, annealing to produce more crystalline NiCo 2 O 4 produces only small changes in its hole conductivity, while a thicker SiO x layer is formed at the n-Si/p-NiCo 2 O 4 interface, greatly reducing the PEC performance. The generality of the p-TCO protection approach is demonstrated by multihour, stable, water oxidation with n-InP/p-NiCo 2 O 4 heterojunction photoanodes.

Chen, Le↗

Investigation on the Surface Vortex Formation During Mechanical Stirring with an Axial-Flow Impeller Used in an Aluminum Process

The present study investigated the mechanism of surface vortex formation in an aluminum melt vessel stirred by an axial-flow impeller mechanically. The oxide film is formed at the aluminum melt/air interface, and the movement of the interface entrains the oxide film and inclusions. Hence, the transient movement of melt–air interface is significant. The present study conducted a water model experiment and numerical simulation focusing on the movement of gas–liquid interface. The present study found that the oxide film can be entrained by two phenomena: (1) local surface vortex and (2) sloshing near the vessel wall. The local surface vortex is formed due to the pressure distribution around the impeller, and the sloshing is caused by macroinstabilities, which is generated by the discharged flow of axial-flow impeller. Besides, the shape of gas–liquid interface is dependent on the impeller shape. The axial-flow impeller gives rise to steeply curved shape of gas–liquid interface near the impeller shaft.

36 MATERIALS SCIENCE↗

Characterization of Shallow, Undoped Ge/SiGe Quantum Wells Commercially Grown on 8-in. (100) Si Wafers

Hole spins in Ge quantum wells have shown success in both spintronic and quantum applications, thereby increasing the demand for high-quality material. We performed material analysis and device characterization of commercially grown shallow and undoped Ge/SiGe quantum well heterostructures on 8-in. (100) Si wafers. Material analysis reveals the high crystalline quality, sharp interfaces, and uniformity of the material. We demonstrate a high mobility (1.7 × 10 5 cm 2 V –1 s –1 ) 2D hole gas in a device with a conduction threshold density of 9.2 × 10 10 cm –2 . We study the use of surface preparation as a tool to control barrier thickness, density, mobility, and interface trap density. We report interface trap densities of 6 × 10 12 eV –1 . Our results validate the material’s high quality and show that further investigation into improving device performance is needed. We conclude that surface preparations which include weak Ge etchants, such as dilute H 2 O 2 , can be used for postgrowth control of quantum well depth in Ge-rich SiGe while still providing a relatively smooth oxide–semiconductor interface. Our results show that interface state density is mostly independent of our surface preparations, thereby implying that a Si cap layer is not necessary for device performance. Transport in our devices is instead limited by the quantum well depth. Commercially sourced Ge/SiGe, such as studied here, will provide accessibility for future investigations.

36 MATERIALS SCIENCE↗

Photoemission spectroscopy study of the lanthanum lutetium oxide/silicon interface

Rare earth oxides are promising candidates for future integration into nano-electronics. A key property of these oxides is their ability to form silicates in order to replace the interfacial layer in Si-based complementary metal-oxide field effect transistors. In this work a detailed study of lanthanum lutetium oxide based gate stacks is presented. Special attention is given to the silicate formation at temperatures typical for CMOS processing. The experimental analysis is based on hard x-ray photoemission spectroscopy complemented by standard laboratory experiments as Rutherford backscattering spectrometry and high-resolution transmission electron microscopy. Homogenously distributed La silicate and Lu silicate at the Si interface are proven to form already during gate oxide deposition. During the thermal treatment Si atoms diffuse through the oxide layer towards the TiN metal gate. This mechanism is identified to be promoted via Lu-O bonds, whereby the diffusion of La was found to be less important.

36 MATERIALS SCIENCE↗

2015 Progress Report/July 2016: Iron Oxide Redox Transformation Pathways: The Bulk Electrical Conduction Mechanism

Despite decades of research on the reactivity and stable isotope properties of Fe oxides, the ability to describe the redox behavior of Fe oxides in the environment is still quite limited. This is due, in large part, to the analytical and spatial complexities associated with studying microscopic processes at the Fe oxide-water interface. This project had the long-term vision of filling this gap by developing a detailed understanding of the relationship between interfacial ET processes, surface structure and charge, and mineral semiconducting properties. We focused on the Fe(III)-oxides and oxyhydroxides because of their geochemical preponderance, versatility in synthesis of compositionally, structurally, and morphologically tailored phases, and because they are amenable to a wide range of surface and bulk properties characterization. In particular, reductive transformation of phases such as hematite (α-Fe 2 O 3 ) and goethite (α-FeOOH) in aqueous solution can serve as excellent model systems for studies of electron conduction processes, as well as provide valuable insights into effect of nanoscale conductive materials on contaminant fate at DOE sites. More specifically, the goal of the Iowa component of this project was to use stable Fe isotope measurements to simultaneously measure isotope specific oxidation states and concentrations of Fe at the hematite-water and goethite-water interface. This work builds on our previous work where we used an innovative combination of 57 Fe Mössbauer spectroscopy and high precision isotope ratio measurements (MC-ICP-MS) to probe the dynamics of the reaction of aqueous Fe(II) with goethite. Mössbauer spectroscopy detects 57 Fe only among all other Fe isotopes and we have capitalized on this to spectroscopically demonstrate Fe(II)-Fe(III) electron transfer between sorbed Fe(II) and Fe(III) oxides (Handler, et al., 2009; Gorski, et al. 2010; Rosso et al., 2010). By combining the Mössbauer spectroscopy and stable isotopes measurements, we have been able to simultaneously track the oxidation state and isotope concentration of the bulk Fe oxide and aqueous Fe. One of our most compelling findings is that despite the apparent stability of the Fe(II)-goethite system, there is actually a tremendous amount of Fe atom cycling occurring between the aqueous phase and the bulk goethite as indicated by the isotopic composition of both phases approaching the mass balance average (Handler et al., 2009). How such extensive re-crystallization and Fe atom exchange can occur with no significant morphological change is a fascinating question. Based on previous work from PI Rosso’s group showing that a potential gradient across hematite crystal faces leads to conduction through hematite and growth and dissolution at separate crystal faces we proposed that a redox-driven recrystallization could be occurring that would explain the extensive mixing observed with the isotope data. From our previous studies utilizing Mössbauer spectroscopy, we know that sorption of Fe(II) onto goethite results in electron transfer between the sorbed Fe(II) and the structural Fe(III) in goethite. Oxidation of the sorbed Fe(II) produces growth of goethite on goethite (i.e., homoepitaxy), as well as injection of an electron into goethite. It is possible that electron transfer from sorbed Fe(II) occurs across a potential gradient, and that Fe(II) atoms are dissolved at a different location on the goethite surface. These newly-reduced Fe(II) atoms could then dissolve into the aqueous phase, exposing fresh Fe(III) goethite to the aqueous phase. Through a repeated series of these five steps of sorption–electron transfer–crystal growth–conduction– dissolution, a redox-driven conveyor belt, could be established that would allow all of the goethite to be eventually exposed to the aqueous phase and exchanged. This surface-mediated recrystallization process would result in similar Fe isotope distributions in the aqueous phase and goethite particle, as we have observed here. It would also result in a stable aqueous Fe(II) concentration, if there were equal rates of goethite growth and dissolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear–electronic orbital approach to quantization of protons in periodic electronic structure calculations

The nuclear–electronic orbital (NEO) method is a well-established approach for treating nuclei quantum mechanically in molecular systems beyond the usual Born–Oppenheimer approximation. In this work, we present a strategy to implement the NEO method for periodic electronic structure calculations, particularly focused on multicomponent density functional theory (DFT). The NEO-DFT method is implemented in an all-electron electronic structure code, FHI-aims, using a combination of analytical and numerical integration techniques as well as a resolution of the identity scheme to enhance computational efficiency. After validating this implementation, proof-of-concept applications are presented to illustrate the effects of quantized protons on the physical properties of extended systems, such as two-dimensional materials and liquid–semiconductor interfaces. Specifically, periodic NEO-DFT calculations are performed for a trans-polyacetylene chain, a hydrogen boride sheet, and a titanium oxide–water interface. The zero-point energy effects of the protons as well as electron–proton correlation are shown to noticeably impact the density of states and band structures for these systems. These developments provide a foundation for the application of multicomponent DFT to a wide range of other extended condensed matter systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Borate Accelerates Rates of Steady Oxygen–Isotope Exchange for Polyoxoniobate Ions in Water

Understanding simple oxygen exchange reactions is important to a variety of communities concerned with the chemistry of oxides with water. Limitations in the methods available for studying reactions at these oxide-water interfaces, as well as difficulties in characterizing their structures, have led to the use of polyoxometalates (POMs) as model molecules. POMs are metal-oxide ions comprised of group 5 and 6 metals. These ions constitute discrete and often soluble clusters than can be spectroscopically probed with great confidence. In addition, POMs are interesting in their own right owing to their structural and chemical diversity, and are finding an increasing number of applications. We have been investigating the oxygen-isotope-exchange kinetics in these ions and aqueous solution by 17 O-Nuclear Magnetic Resonance (NMR) to help better recognize what controls molecule-water interface processes on the level of individual oxygen sites. Furthermore, these structures are chosen because the isotope-exchange reactions could be followed separately from dissociation or condensation of the structure.

58 GEOSCIENCES↗

Oxygen vacancies at the surface of SrTiO{sub 3} thin films

The two-dimensional electron gas (2DEG) observed at the surface of oxide thin films and at the interface between two oxides has been widely discussed, but the mechanism responsible for this behavior is still not well understood. In this work, we study the properties of the SrTiO{sub 3} (001) surface and show that defects are necessary in order to explain this 2DEG. We study the properties of oxygen vacancies at the TiO{sub 2} and SrO terminated surface, and conclude they can explain the metallic behavior experimentally observed. There is a strong tendency for these vacancies to be localized at the surface, where the formation energy is less than 2.92 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning Two Interfaces with Fluoroethylene Carbonate Electrolytes for High-Performance Li/LCO Batteries

Various electrolytes have been reported to enhance the reversibility of Li metal electrodes. However, for these electrolytes, concurrent and balanced control of Li metal and positive electrode interfaces is a critical step toward fabrication of high performance Li metal batteries. Here, we report the tuning of Li metal and lithium cobalt oxide (LCO) interfaces with fluoroethylene carbonate (FEC)-containing electrolytes to achieve high cycling stability of Li/LCO batteries. Reversibility of Li metal electrode is considerably enhanced for electrolytes with high FEC contents, confirming the positive effect of FEC on the stabilization of Li metal. electrode. However, for FEC content of 50 wt% and above, the discharge capacity is significantly reduced due to the formation of a passivation layer on the LCO cathodes. Using balanced tuning of the two interfaces, stable cycling over 350 cycle at 1.5 mA cm-2 is achieved for an Li/LCO cell with 1M PF6 FEC/DMC=30/70 electrolyte. The enhanced reversibility of the Li metal electrode is associated with the formation of LiF and polycarbonate in the FEC-derived solid electrolyte interface (SEI) layer. In addition, electrolytes with high FEC content lead to lateral Li deposition on the sides of Li deposits and larger dimensions of rod-like Li deposits, suggesting the elastic and ion conductive nature of the FEC-derived SEI layer.

Lee, Jinhong↗

Gold, Copper, and Platinum Nanoparticles Dispersed on CeOx/TiO2(110) Surfaces: High Water-Gas Shift Activity and the Nature of the Mixed-Metal Oxide at the Nanometer Level

At small coverages of ceria on TiO{sub 2}(110), the CeO{sub x} nanoparticles have an unusual coordination mode. Scanning tunneling microscopy and density-functional calculations point to the presence of Ce{sub 2}O{sub 3} dimers, which form diagonal arrays that have specific orientations of 0, 24, and 42{sup o} with respect to the [1 -1 0] direction of the titania substrate. At high coverages of ceria on TiO{sub 2}(110), the surface exhibits two types of terraces. In one type, the morphology is not very different from that observed at low ceria coverage. However, in the second type of terrace, there is a compact array of ceria particles with structures that do not match the structures of CeO{sub 2}(111) or CeO{sub 2}(110). The titania substrate imposes on the ceria nanoparticles nontypical coordination modes, enhancing their chemical reactivity. This phenomenon leads to a larger dispersion of supported metal nanoparticles (M = Au, Cu, Pt) and makes possible the direct participation of the oxide in catalytic reactions. The M/CeO{sub x}/TiO{sub 2}(110) surfaces display an extremely high catalytic activity for the water-gas shift reaction that follows the sequence Au/CeO{sub x}/TiO{sub 2}(110) < Cu/CeO{sub x}/TiO{sub 2}(110) < Pt/CeO{sub x}/TiO{sub 2}(110). For low coverages of Cu and CeO{sub x}, Cu/CeO{sub x}/TiO{sub 2}(110) is 8-12 times more active than Cu(111) or Cu/ZnO industrial catalysts. In the M/CeO{sub x}/TiO{sub 2}(110) systems, there is a strong coupling of the chemical properties of the admetal and the mixed-metal oxide: The adsorption and dissociation of water probably take place on the oxide, CO adsorbs on the admetal nanoparticles, and all subsequent reaction steps occur at the oxide-admetal interface. The high catalytic activity of the M/CeO{sub x}/TiO{sub 2}(110) surfaces reflects the unique properties of the mixed-metal oxide at the nanometer level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Gold, Copper and Platinum Nanoparticles Dispersed on CeOx/TiO2(110) Surfaces: High Water-Gas Shift Activity and the Nature of the Mixed-Metal Oxide at the Nanometer Level

At small coverages of ceria on TiO{sub 2}(110), the CeO{sub x} nanoparticles have an unusual coordination mode. Scanning tunneling microscopy and density-functional calculations point to the presence of Ce{sub 2}O{sub 3} dimers, which form diagonal arrays that have specific orientations of 0, 24, and 42{sup o} with respect to the [1 -1 0] direction of the titania substrate. At high coverages of ceria on TiO{sub 2}(110), the surface exhibits two types of terraces. In one type, the morphology is not very different from that observed at low ceria coverage. However, in the second type of terrace, there is a compact array of ceria particles with structures that do not match the structures of CeO{sub 2}(111) or CeO{sub 2}(110). The titania substrate imposes on the ceria nanoparticles nontypical coordination modes, enhancing their chemical reactivity. This phenomenon leads to a larger dispersion of supported metal nanoparticles (M = Au, Cu, Pt) and makes possible the direct participation of the oxide in catalytic reactions. The M/CeO{sub x}/TiO{sub 2}(110) surfaces display an extremely high catalytic activity for the water-gas shift reaction that follows the sequence Au/CeO{sub x}/TiO{sub 2}(110) < Cu/CeO{sub x}/TiO{sub 2}(110) < Pt/CeO{sub x}/TiO{sub 2}(110). For low coverages of Cu and CeO{sub x}, Cu/CeO{sub x}/TiO{sub 2}(110) is 8-12 times more active than Cu(111) or Cu/ZnO industrial catalysts. In the M/CeO{sub x}/TiO{sub 2}(110) systems, there is a strong coupling of the chemical properties of the admetal and the mixed-metal oxide: The adsorption and dissociation of water probably take place on the oxide, CO adsorbs on the admetal nanoparticles, and all subsequent reaction steps occur at the oxide-admetal interface. The high catalytic activity of the M/CeO{sub x}/TiO{sub 2}(110) surfaces reflects the unique properties of the mixed-metal oxide at the nanometer level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coherent growth of oxide films on a cleaved layered metal oxide substrate

Understanding oxide interface-induced effects requires controlled epitaxial growth of films on well-defined substrate surfaces. While conventional film growth on ex situ prepared substrates has proven to be a successful route, the choices of appropriate substrates with atomically defined surfaces are limited. Here, by depositing La 2/3 Sr 1/3 Mn O 3 on Sr 2 Ru O 4 (001), we present an alternative method of growing oxide thin films on in situ cleaved surfaces of layered-structured substrates. Cleaving Sr 2 Ru O 4 at low temperature in ultrahigh vacuum exposes an atomically flat, solely SrO-terminated surface with up to micrometer-scale terraces. The deposition of La 2/3 Sr 1/3 Mn O 3 spontaneously diminishes the surface Ru O 6 in-plane rotational distortion of the substrate and results in a cubic-like perovskite film structure with (La/Sr)-O layer termination. The interface is atomically sharp without obvious deviation of lattice spacing and chemical valence, except in the first unit cell where Ru-Mn intermixing is observed. Finally, these results demonstrate that film growth on a cleaved substrate can be an alternative route to obtain well-defined interfaces and in addition increase the availability of substrates for future oxide films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of hydride precipitation on the corrosion kinetics of Zircaloy-4: effect of the nano-structure and grain boundary properties of the zirconium oxide layer on oxygen diffusion flux - 2016-0073

Hydride precipitation at the oxide-metal interface is frequently proposed as causing the corrosion acceleration of Zircaloy-4 at high burnup in pressurized water reactors (PWRs). In order to identify the local mechanisms possibly involved, we studied the nano-structure of oxides formed on massive zirconium hydrides and reference Zircaloy-4 with an innovative grain mapping technique with the use of transmission electron microscopy (TEM). In autoclave PWR-conditions, the presence of a precipitated hydride phase, previously formed by a cathodic charging technique at the surface of Zircaloy-4, clearly increased the corrosion rate, and a higher oxygen diffusion flux along oxide grain boundaries is observed compared with the reference Zircaloy-4. The texture, grain size, and adjacent grain misorientation in the oxide layer were studied in detail along the direction of the oxide growth using an automated crystal orientation mapping technique associated with TEM for both pre-hydrided and reference Zircaloy-4 samples. The texture in the growth direction is similar on pre-hydrided and reference samples, but the grain-to-grain mis-orientations showed differences. Indeed, on the pre-hydrided sample, the misorientation of 90 deg. C with respect to the [001] monoclinic axis is less probable than in the reference oxide, and more mis-orientations of 50-70 deg. C and 120-150 deg. C, corresponding to larger mismatches between neighboring grain boundaries, are observed. A smaller average diameter of the columnar monoclinic grains is also clearly revealed for the oxide grown on the pre-hydrided sample that leads to a larger number of diffusion paths for oxidizing species. These results are discussed and used for simulating oxygen diffusion flux through the polycrystalline microstructure of the oxide layer as a function of the grain size. (authors)

36 MATERIALS SCIENCE↗

Space-charge behavior of 'Thin-MOS' diodes with MBE-grown silicon films

Basic theoretical and experimental characteristics of a novel 'Thin-MOS' technology, which has promising aspects for integrated high-frequency devices up to several hundred gigahertz are presented. The operation of such devices depends on charge injection into undoped silicon layers of about 1000-A thickness, grown by molecular beam epitaxy on heavily doped substrates, and isolation by thermally grown oxides of about 100-A thickness. Capacitance-voltage characteristics measured at high and low frequencies agree well with theoretical ones derived from uni and ambipolar space-charge models. It is concluded that after oxidation the residual doping in the epilayer is less than approximately 10 to the 16th/cu cm and rises by 3 orders of magnitude at the substrate interface within less than 100 A and that interface states at the oxide interface can be kept low.

Lieneweg, U.↗

Thermally Assisted Adhesion Enhancement in High-Phosphorous Electroless Nickel Plating

High-phosphorus electroless nickel is a widely recognized protective plating for oilfield metallic parts subject to corrosion and wear. In the present investigation, thermally activated diffusion treatment was applied to enhance electroless nickel (10-13 wt.% P) plating adhesion on low-alloy steel (UNS G41400) and reduce the risks of spalling. High-phosphorus electroless nickel (10-13 wt.% P) was applied to a variety of UNS G41400 low-alloy steel test samples as per ASTM B733 that were subsequently heat-treated in air for four distinct temperatures, i.e., 510, 540, 570, and 600 °C for 2-10 h. Following post-plating diffusion heat treatments, the initial amorphous electroless nickel was replaced by Ni{sub 3}P precipitates dispersed in a crystalline nickel-rich phase, with an average hardness improvement from 500 to 700 HK. An increased atomic interdiffusion (from 400 to 3.5 µm) was observed at plating–substrate interfaces, resulting in enhanced adhesion and reduced susceptibility toward spalling. This improvement in adhesion was measured repeatedly through post-bending crack analyses and subsequently validated by interface microindentation. Along with diffusion across plating–substrate interface, nickel oxide formation on surface by oxidation was observed to grow at quasi-parabolic rate with no detrimental impact on spalling. In all cases, plating adhesion was improved by heat treatments due to the diffusion-controlled formation of a seemingly ductile layer.

36 MATERIALS SCIENCE↗