Search NASA⌕ Search

SEARCH · Search NASA

Results for “parameter selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Lossy Compression: An Online Multi-Stage Technology for High-Fidelity Synchro- Waveform Measurements

Effective real-time monitoring and analysis of distributed grids necessitate the use of synchro-waveform measurements, which capture almost all high-frequency disturbances and transient phenomena. However, due to limitations in high-speed measurements and network bandwidth, it is challenging to transfer all high-fidelity synchro-waveforms losslessly and successfully. To cope with these challenges, a hybrid-based online multi-stage compression algorithm is proposed to significantly improve the compression efficiency for synchro-waveform measurements. Initially, the multiple discrete Wavelet transformation is deployed to deconstruct the waveform components. The delta encoding is further developed to decrease the magnitude. In conjunction with the Lempel-Ziv-Markov chain, the hybrid compression algorithm is implemented to achieve real-time compression for the synchro-waveform measurements. Moreover, an innovative error index that synergizes the time and frequency domain error and correlation is formulated to evaluate the waveform distortion. By integrating compression ratio, suitable parameters can be optimally selected. Finally, the simulation, laboratory experiments, as well as field tests across a spectrum of sampling frequencies and time intervals are conducted to substantiate the efficacy of the proposed method. Here, the outcomes demonstrated that a compression ratio of approximately 15.5 and 17.83 can be reached for 0.5 s and 1 s data under both offline and online scenarios, which equates to a substantial 93.5% to 94.39% reduction in data storage requirements.

High-fidelity synchro-waveform measurements↗
DOE OSTI2026

Systematics of the chemical freeze-out line in the high baryon density regime explored at SIS100

The systematic uncertainties of chemical freeze-out fits at SIS100 energies (Au+Au reactions at $\sqrt{s_{NN}}$ = 3 – 5 GeV) are studied using UrQMD simulations. Although hadron production in UrQMD does not occur on a sharp chemical freeze-out hyper-surface, the extracted fit quality is shown to be very good. The extracted chemical parameters depend on the selected hadron species as well as the underlying equation of state (EoS) of the matter. Including light nuclei and anti-protons in the fit increases the expected freeze-out temperature, while a stiffer EoS increases the obtained chemical potential. Similarly, the baryon densities extracted by the thermal fits depend on the choice of hadrons as well as the underlying equation of state. These results are important for the upcoming CBM@FAIR physics program and highlight that a degree of caution is advised when one relates the chemical freeze-out curve to features on the QCD phase diagram like the critical endpoint or a possible phase transition.

Hofmann, Emma Lilith [GSI Helmholtzzentrum für Sch↗
DOE OSTI2024

Modeling the Effects of Artificial Drainage on Agriculture-dominated Watersheds using a Fully Distributed Integrated Hydrology Model: Datasets, scripts, model files

This model-data archive supports the research paper that demonstrates the integration of agricultural drainage features—specifically, narrow engineered ditches and tile drains—into a fully distributed, basin-scale integrated surface-subsurface hydrology model (ISSHM), Amanzi-ATS. The model employs innovative computational meshes aligned with agricultural ditches and incorporates the physically based Hooghoudt's drainage equation to simulate tile drainage, offering a novel strategy that enhances the accuracy of hydrological simulations.The archived dataset includes input parameters, model configurations, and select simulation outputs for the Amanzi-ATS model that successfully captured the streamflow patterns in the Portage River Watershed as validated by USGS gauge readings. Jupyter notebook for the preparation of model inputs and post-processing of outputs are also included. The model's predictive performance achieved a normalized Kling-Gupta Efficiency (KGE) of 0.81, surpassing SWAT without the necessity for site-specific calibration.The Amanzi-ATS model presented in this modeL-data archive allows for numerical experiments to explore the shifts in the flow structure under different drainage scenarios. As a tool for advancing the understanding of distributed hydrological responses and nutrient cycling, this archived model provides valuable insights for researchers, modelers, and decision-makers involved in watershed management and environmental modeling.The Watershed Workflow package is implemented in Python3. The Jupyter notebooks can be executed through multiple open-source tools, for example, Anaconda Jupyter Lab, VS Studio Code, etc. Other data files include CSV and HDF5 files, which can be read through Python scripts. The input files for the ATS model, open-source integrated hydrology, and transport model, are in XML format and can be edited in any commonly used text editors.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

The U.S. Agrivoltaic Shading Tool: A National-Scale Interface for Modeling Light and Shade Patterns in Ten Common Agrivoltaic Configurations

Agrivoltaic systems are dual-use configurations that co-locate agriculture and photovoltaic (PV) infrastructure and require careful design to balance crop performance and energy generation. A critical element of agrivoltaic design is the spatial and temporal distribution of irradiance and shade within and around PV arrays. To support research, planning, and stakeholder decision-making, we introduce the U.S. Agrivoltaic Shading Tool, a novel web-based application that delivers high-resolution irradiance and photosynthetically active radiation (PAR) modeling for ten standardized PV configurations across the conterminous United States. The tool leverages the National Laboratory of the Rockies (NLR) System Advisor Model (SAM) to perform detailed irradiance simulations, using meteorological data from the National Solar Radiation Database (NSRDB). Outputs include seasonal, monthly, weekly, and diurnal patterns of available sunlight, amount of shade, irradiance, and PAR at ground level within agrivoltaic system footprints. For a user's selected location, these results are visualized through interactive visualizations, heatmaps, and time-series plots, designed to be accessible to both technical and non-technical users. In addition to facilitating rapid spatial exploration of agrivoltaic light environments, the tool will offer seamless integration with the InSPIRE Agrivoltaics Design and Analysis Model (ADAM). This optional workflow will allow users to port selected site and configuration parameters into a more advanced modeling environment for further customization of structural layouts, crop-system compatibility, power generation, and technoeconomic performance. Finally, to promote open science, the entire dataset will be hosted and available for open access through the OpenEI platform. By standardizing and disseminating high-quality irradiance data and design tools, the U.S. Agrivoltaic Shading Tool supports a wide range of users, including researchers, landowners, energy developers, and policymakers, in evaluating the agronomic and energetic feasibility of agrivoltaic systems across the United States.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Planar Collisionless Shock Simulations with the Semi-implicit Particle-in-cell Model FLEKS

This study investigates the applicability of the semi-implicit particle-in-cell code FLexible Exascale Kinetic Simulator (FLEKS) to heliospheric shock simulations. We examine one- and two-dimensional local planar shock simulations, initialized using MHD states with upstream conditions representative of plasmas in the hypersonic, β ∼ 1 regime, for both quasi-perpendicular and quasi-parallel configurations. The refined algorithm in FLEKS proves robust, enabling accurate shock simulations with a grid resolution on the order of the electron inertial length d e . Our simulations successfully capture key shock features, including shock structures (foot, ramp, overshoot, and undershoot), upstream and downstream waves (fast magnetosonic, whistler, Alfvén ion-cyclotron, and mirror modes), and non-Maxwellian particle distributions. Crucially, we find that at least two spatial dimensions are critical for accurately reproducing downstream-wave physics in quasi-perpendicular shocks and capturing the complex dynamics of quasi-parallel shocks, including surface rippling, shocklets, short, large-amplitude magnetic structures, magnetic reconnection, and jets. Furthermore, our parameter studies demonstrate the impact of mass ratio and grid resolution on shock physics. This work provides valuable guidance for selecting appropriate physical and numerical parameters for shock simulations using a semi-implicit PIC method, paving the way for incorporating kinetic shock processes into large-scale collisionless plasma simulations with the MHD-AEPIC model.

plasma astrophysics↗
NASA NTRS1963

The brayton cycle for space power

This paper reviews the basic features of the Brayton cycle and discusses the selection of such cycle parameters as working fluid, pressure, and temperature. System performance, weight, and reliability characteristics are then considered in order to determine the suitability of this type of system for the intended space applications. It is shown that the Brayton cycle can be considered suitable for low-power solar and intermediate-power nuclear applications where low specific weight is not a critical requirement. To achieve the low specific weights required for electrical propulsion missions, turbine-inlet temperatures in the 3000 R region at power levels in the 500–1000 kw range appear to be necessary.

ELECTRIC PROPULSION↗
NASA NTRS1971

Dynamic errors in strapdown inertial navigation systems

Motion-induced errors in strapdown inertial navigation systems are discussed. The errors generated in single-degree-of-freedom gyros and accelerometers are treated in great detail. These sensor errors are related to errors at the system level and common pulse rebalance techniques are compared. Since instrument single transmission characteristics are found to be important, describing function analysis is applied to nonlinear pulse torqued inertial sensor loops, and the results are compared with simulations. Two means for reducing motion-induced errors are explored: (1) selection of inertial sensor parameters, and (2) active error compensation by measuring the environment, computing the errors generated, and correcting for them.

Source record↗
NASA NTRS1972

Comparison of the effect of two damper sizes on the performance of a low-solidity axial-flow transonic compressor rotor

The experimental performance of a 20-inch-diameter axial-flow transonic compressor rotor with small dampers is presented. The compressor rotor was tested earlier with large dampers which were twice in size, and comparisons of overall performance and radial distributions of selected flow and performance parameters are made. The rotor with small dampers experienced lower losses in the damper region which resulted in locally higher values of temperature rise efficiency and total pressure ratio. However, there was no appreciable effect on overall efficiency and pressure ratio. A greater stall margin was measured for the rotor with small dampers at design speed, but at 70 and 90 percent of design speed the rotor with large dampers had somewhat greater flow range.

Lewis, G. W., Jr.↗
NASA NTRS1972

The use of minimum order state observers in digital flight-control systems.

This paper deals with the problem of selecting the 'arbitrary' design parameters of digital state observers when they are being used as a part of a digital flight-control system. A cost index is developed which indicates the output noise caused by input quantization due to analog-to-digital conversion. The cost index assumes that the input quantization error is uniformly distributed over the least-significant-bit of the conversion. Formulas relating the cost index to the observer design parameters are presented. The cost index is minimized with respect to the design parameters using a conjugate gradient algorithm. An example of the theory is presented in which a digital observer is designed so that a satisfactory digital flight-control system is obtained starting from an unacceptable one.

Montgomery, R. C.↗
NASA NTRS1973

Drag characteristics of circular cylinders in a laminar boundary layer at supersonic free-stream velocities

Drag measurements were obtained with circular cylinders attached to a flat-plate surface with their longitudinal axes perpendicular to the plate surface. When more than one cylinder was tested, they were alined in a spanwise row perpendicular to the free-stream velocity vector. The drag measurements were obtained through a range of Mach numbers from 2.3 to 4.6, cylinder heights ranging from approximately 0.4 to 3 times the undisturbed laminar boundary-layer thickness, and cylinder height-to-diameter ratios of 1.0 and approximately 2. Included in the paper is a complete presentation in figure form of the experimental results and a discussion of the more significant findings. An attempt is made to select the most appropriate parameters for correlating the experimental results and, where possible, these results are compared with theoretical calculations.

Stallings, R. L., Jr.↗
NASA NTRS1973

Influence of noise constraints on supersonic transport engine design

The challenge to meet or better FAR 36 noise level requirements is particularly difficult in the SST due to the relatively high jet velocities required to give an acceptable supersonic powerplant. This requires careful tailoring of the powerplant cycle to give good flight performance with a jet velocity low enough to meet the noise requirements with a practical jet noise suppressor. The effect on engine cycle selection of meeting various noise levels will be reviewed. The range of engine cycles will cover turbojet and turbofan cycles, as well as variable cycle engines. The selection of the cycle parameters such as turbine temperature, bypass ratio, and fan pressure ratio as required to meet various noise levels will be reviewed. The effect on the engine design of jet noise suppression and engine acoustic treatment will also be reviewed. The impact of designing the engines at the different noise levels will be evaluated on an overall supersonic transport systems basis.

Hines, R. W.↗
NASA NTRS1974

Some observations of the effects of radial distortions on performance of a transonic rotating blade row

A single rotating blade row was tested with two magnitudes of tip radial distortion and two magnitudes of hub radial distortion imposed on the inlet flow. The rotor was about 50 centimeters (20 in.) in diameter and had a design operating tip speed of approximately 420 meters per second (1380 ft/sec). Overall performance at 60, 80, and 100 percent of equivalent design speed generally showed a decrease (compared to undistorted flow) in rotor stall margin with tip radial distortion but no change, or a slight increase, in rotor stall margin with hub radial distortion. At design speed there was a decrease in rotor overall total pressure ratio and choke flow with all inlet flow distortions. Radial distributions of blade element parameters are presented for selected operating conditions at design speed.

Sandercock, D. M.↗
NASA NTRS1975

Evaluation of ultrasonics and optimized radiography for 2219-T87 aluminum weldments

Ultrasonic studies are described which are specifically directed toward the quantitative measurement of randomly located defects previously found in aluminum welds with radiography or with dye penetrants. Experimental radiographic studies were also made to optimize techniques for welds of the thickness range to be used in fabricating the External Tank of the Space Shuttle. Conventional and innovative ultrasonic techniques were applied to the flaw size measurement problem. Advantages and disadvantages of each method are discussed. Flaw size data obtained ultrasonically were compared to radiographic data and to real flaw sizes determined by destructive measurements. Considerable success was achieved with pulse echo techniques and with 'pitch and catch' techniques. The radiographic work described demonstrates that careful selection of film exposure parameters for a particular application must be made to obtain optimized flaw detectability. Thus, film exposure techniques can be improved even though radiography is an old weld inspection method.

Clotfelter, W. N.↗
NASA NTRS1974

Design of state-feedback controllers including sensitivity reduction, with applications to precision pointing

The design procedure of feedback controllers was described and the considerations for the selection of the design parameters were given. The frequency domain properties of single-input single-output systems using state feedback controllers are analyzed, and desirable phase and gain margin properties are demonstrated. Special consideration is given to the design of controllers for tracking systems, especially those designed to track polynomial commands. As an example, a controller was designed for a tracking telescope with a polynomial tracking requirement and some special features such as actuator saturation and multiple measurements, one of which is sampled. The resulting system has a tracking performance comparing favorably with a much more complicated digital aided tracker. The parameter sensitivity reduction was treated by considering the variable parameters as random variables. A performance index is defined as a weighted sum of the state and control convariances that sum from both the random system disturbances and the parameter uncertainties, and is minimized numerically by adjusting a set of free parameters.

Hadass, Z.↗
NASA NTRS1976

Mission analysis to define satellite orbits for earth radiation budget measurements

Information is presented concerning the number of satellites, the orbit altitude, and the inclinations which will provide the spatial and temporal earth coverage required for accurate radiation measurements on regional, zonal, and global scales. Measurement considerations are discussed and an analysis is conducted regarding the selection of suitable orbit parameters. Attention is also given to the results of a simulation model study for the determination of the radiation which can be measured by satellite sensors in different orbits.

Harrison, E. F.↗