Search NASA⌕ Search

SEARCH · Search NASA

Results for “phase stability modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Current driven instabilities of an electromagnetically accelerated plasma

Quantitative measurements of the plasma instability that strongly affects the efficiency and lifetime of electromagnetic plasma accelerators were obtained. Experimental results are presented for the dispersion relations (wave phase velocities), spatial growth rates, and stability boundaries of accelerators. The measured critical wave parameters are found to agree well with theoretical predictions. A kinetic theoretical model was used to study current driven instabilities which are intrinsic to the high-current-carrying magnetized plasma of a magnetoplasmadynamic accelerator. Under certain conditions, marginally stable waves travelling almost perpendicular to the magnetic field are found which travel at a velocity equal to that of the electron current.

Kelly, A. J.↗

Advanced UVOIR Mirror Technology Development for Very Large Space Telescopes

Objective of this work is to define and initiate a long-term program to mature six inter-linked critical technologies for future UVOIR space telescope mirrors to TRL6 by 2018 so that a viable flight mission can be proposed to the 2020 Decadal Review. (1) Large-Aperture, Low Areal Density, High Stiffness Mirrors: 4 to 8 m monolithic & 8 to 16 m segmented primary mirrors require larger, thicker, stiffer substrates. (2) Support System:Large-aperture mirrors require large support systems to ensure that they survive launch and deploy on orbit in a stress-free and undistorted shape. (3) Mid/High Spatial Frequency Figure Error:A very smooth mirror is critical for producing a high-quality point spread function (PSF) for high-contrast imaging. (4) Segment Edges:Edges impact PSF for high-contrast imaging applications, contributes to stray light noise, and affects the total collecting aperture. (5) Segment-to-Segment Gap Phasing:Segment phasing is critical for producing a high-quality temporally stable PSF. (6) Integrated Model Validation:On-orbit performance is determined by mechanical and thermal stability. Future systems require validated performance models. We are pursuing multiple design paths give the science community the option to enable either a future monolithic or segmented space telescope.

Stahl, H. Philip↗

Adaptive control based on retrospective cost optimization

A discrete-time adaptive control law for stabilization, command following, and disturbance rejection that is effective for systems that are unstable, MIMO, and/or nonminimum phase. The adaptive control algorithm includes guidelines concerning the modeling information needed for implementation. This information includes the relative degree, the first nonzero Markov parameter, and the nonminimum-phase zeros. Except when the plant has nonminimum-phase zeros whose absolute value is less than the plant's spectral radius, the required zero information can be approximated by a sufficient number of Markov parameters. No additional information about the poles or zeros need be known. Numerical examples are presented to illustrate the algorithm's effectiveness in handling systems with errors in the required modeling data, unknown latency, sensor noise, and saturation.

Santillo, Mario A.↗

Experimental and Computational Investigation of High Entropy Alloys for Elevated-Temperature Applications

To create and design novel structural materials with enhanced creep-resistance, fundamental studies have been conducted on high-entropy alloys (HEAs), using (1) thermodynamic calculations, (2) mechanical tests, (3) neutron diffraction, (4) characterization techniques, and (5) crystal-plasticity finite-element modeling (CPFEM), to explore future candidates for next-generation power plants. All the constituent binary and ternary systems of the Al-Cr-Cu-Fe-Mn-Ni and Al-Co-Cr-Fe-Ni systems were thermodynamically modeled within the whole composition range. Comparisons between the calculated phase diagrams and literature data are in good agreement. Seven types of HEAs were fabricated from Al-Cr-Cu-Fe-Mn-Ni and Al-Co-Cr-Fe-Ni systems. The Al x CrCuFeMnNi HEAs have disordered [face-centered cubic (FCC) + body-centered cubic (BCC)] crystal structures, not FCC or BCC single structure. Excessive alloying of the Al element results in the change of both microstructural and mechanical properties in Al x CoCrFeNi HEAs. There are mainly three structural features in Al x CoCrFeNi: (1) the morphology, (2) the volume fractions of the constitute phases, and (3) existing temperatures of all six phases. After homogenization, the Al 0.3 CoCrFeNi material is a pure FCC solid solution. After aging at 700 °C for 500 hours, the optimal microstructure combinations, the FCC matrix, needle-like B2 phase within grains, and granular σ phase along grain boundary, is achieved for Al 0.3 CoCrFeNi. The cold-rolling process is utilized to reduce the grain size of Al 0.1 CoCrFeNi and Al 0.3 CoCrFeNi. The chemical elemental partitioning of FCC, BCC, B2, and σphases at different temperatures, before and after mechanical tests, in Al-Cr-Cu-Fe-Mn-Ni and Al-Co-Cr-Fe-Ni systems are quantitatively characterized by both synchrotron X-ray diffraction, neutron diffraction with levitation, scanning electron microscopy (SEM), advanced atom probe tomography (APT), and transmission electron microscopy (TEM). In-situ neutron diffraction experiments were conducted to study the strengthening effect of B2 phase on tensile properties of Al 0.3 CoCrFeNi HEAs directly. The results shows the creep behavior of Al 0.3 CoCrFeNi is superior to conventional alloys, and the heat treatment introduces secondary B2 phase into the FCC matrix, which increase the yielding strength, decrease the ductility, diminish the serrated flow during compression tests at high temperatures. In summary, the outcomes of the development of the HEAs with creep resistance include: (1) Suitable candidates, for the application to boilers and steam and gas turbines at temperatures above 760 °C and a stress of 35 MPa. (2) Fundamental understanding on the precipitate stability and deformation mechanisms of both single-phase and precipitate-strengthened alloys at room and elevated temperatures, and (3) The demonstration of an integrated approach, coupling modeling [thermodynamic calculations and crystal-plasticity finite-element modeling (CPFEM)] and focused experiments, to identify HEAs that outperform conventional alloys for high-temperature applications, which will be applicable for the discovery and development of other high-temperature materials in the power-generating industry.

36 MATERIALS SCIENCE↗

Stability of fissile solution systems - 14614

A Dynamic System Simulation (DSS) has been developed for aqueous homogenous reactors (AHR) and subcritical accelerator-driven system employing fissile solution fuel. These models are comprised of coupled non-linear differential equations describing the neutronics, thermal hydraulic and radiolytic gas behavior in the time domain. Models of specific historic AHR, SUPO (Super Power), KEWB (Kinetics Experiment Water Boiler), and SILENE exhibit close agreement with experimental data in all operating modes including steady-state, ramp and step reactivity insertions. The set of non-linear equations have been utilized to generate a generic transfer function for this class of systems. Output from specific DSS models operating at steady-state is then utilized as input parameters into a transfer function specific to each. Traditional Bode amplitude and phase, Nyquist and Nichols plots, are then generated to examine stability. Results for SUPO and a generic accelerator-driven system suggest these systems are unconditionally stable in the linear approximation. This treatment offers a method to examine the physics and time-based evolution of a critical excursion in a fissile solution system and provides a means to examine the severity of the consequence. This approach provides insight into the characteristics of such and even and sensitivity to materials involved and configuration of the physical system. (authors)

42 ENGINEERING↗

Overpotential-Dependent Phase Transformation Pathways in Lithium Iron Phosphate Battery Electrodes

An objective in battery development for higher storage energy density is the design of compounds that can accommodate maximum ion concentration change over useful electrochemical windows. Not surprisingly, many storage compounds undergo phase transitions in-situ, including production of metastable phases. Unique to this environment is the frequent application of electrical over- and underpotentials, which are the electrical analogs to undercooling and superheating. Surprisingly, overpotential effects on phase stability and transformation mechanisms have not been studied in detail. Here we use synchrotron X-ray diffraction performed in-situ during potentiostatic and galvanostatic cycling, combined with phase-field modeling, to reveal a remarkable dependence of phase transition pathway on overpotential in the model olivine Li1-xFePO4. At both low (e.g., <20 mV) and high (>75 mV) overpotentials a crystal-to-crystal olivine transformation is preferred, whereas at intermediate overpotentials a crystalline-to-amorphous phase transition dominates. At nanoscale particle size, amorphization is further emphasized. Implications for battery use and design are considered.

43 PARTICLE ACCELERATORS↗

Morphological Instability of Grain Boundaries in Two-Phase Coherent Solids

We show both computationally and analytically that grain boundaries that exhibit shear-coupled motion become morphologically unstable in solid alloys that phase separate into coherent domains of distinct chemical compositions. Here, we carry out simulations of continuum models demonstrating that this instability is mediated by long-range elastic interaction between compositional domains and grain boundaries. In addition, we perform a linear stability analysis that predicts the range of unstable wavelengths in good quantitative agreement with simulations. In nonlinear stages, this pattern-forming instability leads to the breakup of low-angle grain boundaries, thereby strongly impacting microstructural evolution in a wide range of phase-separating materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular interactions underlying liquid-liquid phase separation of the FUS low-complexity domain

The low-complexity domain of the RNA-binding protein FUS (FUS LC) mediates liquid-liquid phase separation (LLPS), but the interactions between the repetitive SYGQ-rich sequence of FUS LC that stabilize the liquid phase are not known in detail. By combining NMR and Raman spectroscopy, mutagenesis, and molecular simulation, we demonstrate that heterogeneous interactions involving all residue types underlie LLPS of human FUS LC. Furthermore, we find no evidence that FUS LC adopts conformations with traditional secondary structure elements in the condensed phase; rather, it maintains conformational heterogeneity. We show that hydrogen bonding, π/sp 2 , and hydrophobic interactions all contribute to stabilizing LLPS of FUS LC. In addition to contributions from tyrosine residues, we find that glutamine residues also participate in contacts leading to LLPS of FUS LC. These results support a model in which FUS LC forms dynamic, multivalent interactions via multiple residue types and remains disordered in the densely packed liquid phase.

59 BASIC BIOLOGICAL SCIENCES↗

Multisublattice cluster expansion study of short-range ordering in iron-substituted strontium titanate

Owing to the challenges in obtaining realistic atomic configurations in large chemical phase spaces, it is not straightforward to describe structure–property relations in materials exhibiting configurational disorder. One example is iron-substituted strontium titanate (SrTi 1–x Fe x O 3–d , STF), a promising perovskite-derivative cathode material in solid oxide fuel cells that exhibits full solid solubility 0 ≤ x ≤ 1 and a tendency to exhibit short-range order. Here we demonstrate a multisublattice cluster expansion (CE) framework and apply it to STF across the full composition range. The CE approach is distinct from more traditional CE formulations in that clusters are defined explicitly by the chemical species distributed among multiple sublattices, rather than via cluster functions of occupation variables with decoration. The modified CE approach makes it easy to distinguish meaningful chemical interactions that are harder to extract from conventional CE, since for the latter chemical identity in a cluster is expressed as a product of site occupations. The least absolute shrinkage and selection operator (LASSO) is implemented as a regression analysis tool to select key clusters and avoid overfitting. We demonstrate this formulation on STF, and show that it can accurately predict configurational energies in comparison to conventional CE. From the key clusters, we identify that short-range ordering between substitutional Fe and oxygen vacancies (V O ) results in the formation of Fe–VO strings. In addition, we consider the stability of STF through CE-based Monte Carlo (MC) simulations and confirm the presence of superstructures that were previously observed in transmission electron microscopy. In this work, analysis of atomic configurations from MC samples reveals variations in the oxidation state of Fe atoms, which can be explained by the ordering tendency of Fe and V O . The cluster description and selection formalism described here may be applied to other disordered multisublattice systems for accurate and efficient material modeling.

36 MATERIALS SCIENCE↗

Phase instabilities in austenitic steels during particle bombardment at high and low dose rates

Disruption of phase stability by energetic particle bombardment is a major challenge in designing advanced radiation-tolerant alloys and ion beam processing of nanocomposites. Particularly, ballistic dissolution susceptibility of different solute nanocluster species in alloys is poorly understood. Here, low dose rate neutron irradiations were conducted on a Fe-Cr-Ni based austenitic steel in the BOR-60 reactor (9.4 × 10 -7 dpa/s, 318 °C) followed by accelerated dose rate ion irradiations at multiple temperatures ( 10 -3 dpa/s, 380 – 420 °C). Using atom probe tomography, the stability of radiation-enhanced Cu-rich and radiation-induced Ni-Si-Mn-rich nanoclusters was evaluated. During neutron irradiation, Cu-rich clusters nucleated with their core concentrations progressively increasing with dose, while Ni-Si-Mn-rich clusters formed and evolved into G-phase precipitates. Ion irradiations dramatically altered the nanoclusters. Cu-rich clusters were ballistically dissolved, but Ni-Si-Mn-rich clusters remained stable and coarsened with dose at 400 and 420 °C, highlighting that different nanocluster species in a single microstructure can have innately distinct ballistic dissolution susceptibilities. Solute-specific recoil rates were incorporated into the Heinig precipitate stability model, which shows that in addition to radiation-enhanced diffusion, recovery from ballistic dissolution depends on solute concentration gradient near cluster interfaces. Finally, the combined experimental-modeling study quantified the critical temperatures and damage rates where ballistic dissolution dominates for each cluster species.

36 MATERIALS SCIENCE↗

Linear response strength functions with iterative Arnoldi diagonalization

We report on an implementation of a new method to calculate random phase approximation (RPA) strength functions with iterative non-Hermitian Arnoldi diagonalization method, which does not explicitly calculate and store the RPA matrix. We discuss the treatment of spurious modes, numerical stability, and how the method scales as the used model space is enlarged. We perform the particle-hole RPA benchmark calculations for double magic nucleus {sup 132}Sn and compare the resulting electromagnetic strength functions against those obtained within the standard RPA.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Symmetry adapted states and the quantum phase transition in the Dicke model

We study the phase transition properties of the ground state of the Dicke model by means of a variational procedure together with the catastrophe formalism. The proposed variational state is the tensorial product of the SU(2) and Weyl coherent states, and the expectation value of the Dicke Hamiltonian with respect this state is calculated. The stability properties of the energy surface exhibit a phase transition from the normal to the super-radiant behavior of the two-level atoms, when {omega}-tilde{sub a{omega}}-tilde{sub F} = {+-}4{gamma}-tilde{sup 2}. At the same time, the analytic form of the ground state in terms of the minimum critical points of the system is obtained. The Dicke Hamiltonian is invariant under transformations of the point group C{sub 2} = {l_brace}I,exp(i{pi}{Lambda}-circumflex){r_brace}, with {Lambda} circumflex the excitation number operator. To restore this parity symmetry, we separate the variational proposed states into orthogonal even and odd components, which give rise to analytic expressions for the ground and first excited states. The fidelity of these projected variational states is verified by studying their overlap with the exact quantum results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Arrested Phase Separation in Double-Exchange Models: Large-Scale Simulation Enabled by Machine Learning

In this work, we present large-scale dynamical simulations of electronic phase separation in the single-band double-exchange model based on deep-learning neural-network potentials trained from small-size exact diagonalization solutions. We uncover an intriguing correlation-induced freezing behavior as doped holes are segregated from half filled insulating background during equilibration. While the aggregation of holes is stabilized by the formation of ferromagnetic clusters through Hund’s coupling between charge carriers and local magnetic moments, this stabilization also creates confining potentials for holes when antiferromagnetic spin-spin correlation is well developed in the background. The dramatically reduced mobility of the self-trapped holes prematurely disrupts further growth of the ferromagnetic clusters, leading to an arrested phase separation. Implications of our findings for phase separation dynamics in materials that exhibit colossal magnetoresistance effect are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Agro-waste shaped porous Al2O3/Ni composites: Corrosion resistance performance and artificial neural network modelling

Highlights: • Porous Al{sub 2}O{sub 3}/Ni composites were developed with agro-waste pore-forming agents. • The RH and SCB graded composites showed Ni{sub 3}Al{sub 2}SiO{sub 8} and NiAl{sub 2}O{sub 4} spinels respectively. • Superior chemical stability was demonstrated by the Al{sub 2}O{sub 3}-2Ni-RH composite. • The ANN model demonstrated a good performance with R{sup 2} value of approx. 0.99. - Abstract: In the present study, an analysis on the combined effect of nickel (Ni) reinforcement and pore former type in characterizing the corrosion behavior of composite porous alumina ceramics was performed. In order to showcase the potential of the new porous ceramics, pore-forming agents (PFAs) from rice husk (RH) and sugarcane bagasse (SCB) were used in shaping the plain and composite porous alumina samples having sample formulation of Al{sub 2}O{sub 3}-xNi-PFA; x = 0, 2, 4, 6 and 8 wt%. Results showed that the emergence of a highly stable Ni{sub 3}Al{sub 2}SiO{sub 8} spinelloid phase in the RH-graded composites enhanced their chemical stability in the corrosive mediums (10 wt% NaOH and 20 wt% H{sub 2}SO{sub 4}) relative to the plain and the corresponding SCB-graded counterparts. An artificial neural network (ANN) model has been developed for predicting the corrosion behavior of the plain and composite porous alumina ceramics based on the experimental data. The developed ANN model satisfactorily predicted the percent mass losses of the porous ceramics in strong alkali and strong acid solutions with coefficient of determination (R{sup 2}) of approximately 0.99.

36 MATERIALS SCIENCE↗

The minimal fermionic model of electroweak baryogenesis

We present the minimal model of electroweak baryogenesis induced by fermions. The model consists of an extension of the Standard Model with one electroweak singlet fermion and one pair of vector like doublet fermions with renormalizable couplings to the Higgs. A strong first order phase transition is radiatively induced by the singlet-doublet fermions, while the origin of the baryon asymmetry is due to asymmetric reflection of the same set of fermions on the expanding electroweak bubble wall. The singlet-doublet fermions are stabilized at the electroweak scale by chiral symmetries and the Higgs potential is stabilized by threshold corrections coming from a multi-TeV ultraviolet completion which does not play any significant role in the phase transition. We work in terms of background symmetry invariants and perform an analytic semiclassical calculation of the baryon asymmetry, showing that the model may effectively generate the observed baryon asymmetry for percent level values of the unique invariant CP violating phase of the singlet-doublet sector. We include a detailed study of electron electric dipole moment and electroweak precision limits, and for one typical benchmark scenario, we also recast existing collider constraints, showing that the model is consistent with all current experimental data. We point out that fermion induced electroweak baryogenesis has irreducible phenomenology at the 13 TeV LHC since the new fermions must be at the electroweak scale, have electroweak quantum numbers and couple strongly to the Higgs. The most promising searches involve topologies with multiple leptons and missing energy in the final state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Phase-field simulations of thickness-dependent domain stability in PbTiO3 thin films

Phase-field approach is used to predict the thickness effect on the domain stability in ferroelectric thin films. The strain relaxation mechanism and critical thickness for dislocation formation from both Matthews-Blakeslee (MB) and People-Bean (PB) models are employed. Thickness - strain domain stability diagrams are obtained for PbTiO3 thin films under different strain relaxation models. The relative domain fractions as a function of film thickness are also calculated and compared with experiment measurements in PbTiO3 thin films grown on SrTiO3 and KTaO3 substrates.

domain stability↗

Alstom’s Chemical Looping Combustion Technology for CO 2 Capture for New and Retrofit Coal-Fired Power Plants

Cold Flow Modeling (CFM) is a critical tool to understand solid transport, corresponding process stability, and the impact on the performance of the LCL-CTM technology. As such it plays a central role in the development of the LCL-CTM process and deserves a standalone report in the final reporting on Phase II of the collaboration with DOE under award DE FE0009484. The 40-Foot Cold Flow Model (CFM) was constructed before the 3 MWth Prototype. The purpose of the CFM is to: develop design and operational information to design the Prototype help resolve solids transport problems that occur with the Prototype provide Prototype operator training. This report provides a review on the use of the CFM to achieve better understanding, design, and operation of solid transport for the LCL-CTM technology. Significant progress was made by iteratively designing, operating, and testing between the CFM and the Prototype scale. Fundamental understanding of the transport of reactive solids was acquired based on the reported effort. Unfortunately, the technical gaps identified for Phase II of the LCL-CTM technology development could not all be eliminated and the transport of solids under high fuel load remained unstable at the Prototype scale. The nature of the iterative learning going back and forth between CFM and Prototype scale became cost-prohibitive and forced the project to pivot at a relatively late date in the project. The LCL-CTM process switched from a Transport reactor design to a Bubbling Fluidized Bed (BFB) design in order to successfully achieve all process criteria but at the 100-kWth scale to accommodate the residual funding. The CFM remains a very relevant tool for future LCL-CTM process development. While the LCL-CTM technology still must be demonstrated under scale up conditions (and the success of the BFB testing would push to scale up in that configuration), the CFM will remain a preferred tool for troubleshooting and reducing the technical gaps of LCL-CTM.

01 COAL, LIGNITE, AND PEAT↗

Catalytic Activity and Water Stability of the MgO(111) Surface for 2-Pentanone Condensation

Nanomaterials derived from earth-abundant metal oxides have gained tremendous interest as catalysts; although, water stability remains a challenge. This study examines MgO(111) surfaces for 2-pentanone condensation and their evolution during D2O hydration. Catalyst screening confirmed the high activity of fresh MgO(111) for 2-pentanone condensation relative to conventionally prepared MgO(100). Computational modeling suggests that the (111) surface is readily hydroxylated, and that surface hydroxyls help stabilize the surface and reduce the barrier for 2-pentanone condensation. Vapor-phase D2O hydration after 3 min increased MgO(111) hydroxyls and retained surface area and activity; however, after 1 h, deuteroxide formation reduced the surface area and activity by >30 %. After 24 h, deuteroxide growth slowed down, and surface area and activity remained stable. This suggests MgO(111)-derived hydroxide may be the dominant surface responsible for 2-pentanone condensation following water exposure. Thermal regeneration of the 24-h sample restored 86 % of the surface area and 94 % of the activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗