Search NASA⌕ Search

SEARCH · Search NASA

Results for “point cloud”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

The Role of Orograph and Parallax Corrections on High Resolution Geostationary Satellite Rainfall Estimates for Flash Flood Applications

The current generation of geosynchronous satellites exhibits considerably improved capabilities in the area of resolution, gridding accuracy, and sampling frequency as compared to their predecessors. These improvements have made it possible to accurately observe the life cycle of small scale, short-live phenomenon like rapidly developing thunderstorms, at a very high spatial and temporal resolutions. While the gain in the improved resolution is not significant for synoptic scale cloud systems, it plays a major role on the computation of precipitation values for mesoscale and stonn scale systems. Two of the important factor on the accurate precision of precipitation from satellite imagery are the position of the cloud tops as viewed by the satellite and the influence of orographic effects on the distribution of precipitation. The first problem has to do with the fact that the accurate estimation of precipitation from data collected by a satellite in geosynchronous orbit requires the knowledge of the exact position of the cloud tops with respect to the ground below. This is not a problem when a cloud is located directly below the satellite; at large viewing angles the geographic coordinates on satellite images are dependent on cloud heights and distance from the sub-satellite point. The latitude and longitude coordinates for high convective cloud tops are displaced away from the sub-satellite point and may be shifted by as much as 20 Km from the sea level coordinates. The second problem has to do with the variations in rainfall distribution with elevation. Ground observations have shown that precipitation amounts tend to increase with height and that the slope of the hill or mountain that is facing the prevailing wind normally receives greater rainfall then do the lee slopes. The purpose of the study is to show the recent developments at the Office of Research and Applications (ORA) at the National Oceanic and Atmospheric Administration (NOAA/NESDIS) in Camp Springs, MD, USA, to adjust any satellite rainfall estimation technique and account for orographic and parallax corrections. Description and examples of the procedure applied to the current NOAA/NESDIS experimental satellite rainfall estimation technique for flash flood applications will be presented at the conference.

Vicente, Gilberto A.↗

Audits Made Simple

A company just got notified there is a big external audit coming in 3 months. Getting ready for an audit can be challenging, scary, and full of surprises. This Gold Paper describes a typical audit from notification of the intent to audit through disposition of the final report including Best Practices, Opportunities for Improvement (OFI), and issues that must be fixed. Good preparation can improve the chances of success. Ensuring the auditors understand the environment and requirements is paramount to success. It helps the auditors understand that the enterprise really does think that security is important. Understanding and following a structured process ensures a smooth audit process. Ensuring follow-up on OFIs and issues in a structured fashion will also make the next audit easier. It is important to keep in mind that the auditors will use the previous report as a starting point. Now the only worry is the actual audit and subsequent report and how well the company has done. “Virtualization, mobilization, and cloud technology have created new points of entry into business, leaving them vulnerable to covert cyber-attacks,” states a report by Ernst & Young. Executives are struggling with the potential for a data breach, and resolving this business risk is high on their agenda. While most audit committee members are financially solid, they lack knowledge of technology issues, making understanding of this risk difficult. Success with an audit helps management understand the risk management is accepting, highlight gaps in security, and generate ideas on how to improve. These results are an important aspect of managing the business risk.

97 MATHEMATICS AND COMPUTING↗

CAL 83 - A puzzling X-ray source in the Large Magellanic Cloud

Spectroscopic observations of the X-ray point source no. 83 in the Columbia Astrophysics Laboratory Einstein survey of the Large Magellanic Cloud have been accumulated over 4 yr. The optical spectrum shows no stellar absorption features, but only emission lines typical of an accretion disk. Radial velocity measurements reveal a small (K = 30 km/s) velocity variation modulated at 0.93 d, which appears to be the orbital period. No strong constraints can be put on the mass of the collapsed object, but its companion must be a low-mass, evolved star. Evidence for a precessing disk with a possible period of 69 days is presented. Exosat X-ray observations reveal no short-term (less than 6 hr) periodicities, although erratic, random variations were observed. The X-ray spectrum is very soft, reminiscent of some of the candidate black-hole sources. IUE ultraviolet spectra show only weak emission lines of N V and He II. The UV flux is variable with a mean effective temperature of about 19,000 K. Optical B, V photometry during November 1985 showed random variations of about 0.2 mag with a mean V = 17.3 mag.

Crampton, David↗

Buoyant production and consumption of turbulence kinetic energy in cloud-topped mixed layers

It is pointed out that studies of the entraining planetary boundary layer (PBL) have generally emphasized the role of buoyancy fluxes in driving entrainment. The buoyancy flux is proportional to the rate of conversion of the potential energy of the mean flow into the kinetic energy of the turbulence. It is not unusual for conversion to proceed in both directions simultaneously. This occurs, for instance, in both clear and cloudy convective mixed layers which are capped by inversions. A partitioning of the net conversion into positive parts, generating turbulence kinetic energy (TKE), and negative parts (TKE-consuming), would make it possible to include the positive part in the gross production rate, and closure would be achieved. Three different approaches to partitioning have been proposed. The present investigation is concerned with a comparison of the three partitioning theories. Particular attention is given to the cloud-topped mixed layer because in this case the differences between two partitioning approaches are most apparent.

Randall, D. A.↗

INFERENCE OF INHOMOGENEOUS CLOUDS IN AN EXOPLANET ATMOSPHERE

We present new visible and infrared observations of the hot Jupiter Kepler-7b to determine its atmospheric properties. Our analysis allows us to (1) refine Kepler-7b's relatively large geometric albedo of Ag = 0.35 ± 0.02, (2) place upper limits on Kepler-7b thermal emission that remains undetected in both Spitzer bandpasses and (3) report a westward shift in the Kepler optical phase curve. We argue that Kepler-7b's visible flux cannot be due to thermal emission or Rayleigh scattering from H{sub 2} molecules. We therefore conclude that high altitude, optically reflective clouds located west from the substellar point are present in its atmosphere. We find that a silicate-based cloud composition is a possible candidate. Kepler-7b exhibits several properties that may make it particularly amenable to cloud formation in its upper atmosphere. These include a hot deep atmosphere that avoids a cloud cold trap, very low surface gravity to suppress cloud sedimentation, and a planetary equilibrium temperature in a range that allows for silicate clouds to potentially form in the visible atmosphere probed by Kepler. Our analysis does not only present evidence of optically thick clouds on Kepler-7b but also yields the first map of clouds in an exoplanet atmosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Creating User-Friendly Tools for Data Analysis and Visualization in K-12 Classrooms: A Fortran Dinosaur Meets Generation Y

During the summer of 2007, as part of the second year of a NASA-funded project in partnership with Christopher Newport University called SPHERE (Students as Professionals Helping Educators Research the Earth), a group of undergraduate students spent 8 weeks in a research internship at or near NASA Langley Research Center. Three students from this group formed the Clouds group along with a NASA mentor (Chambers), and the brief addition of a local high school student fulfilling a mentorship requirement. The Clouds group was given the task of exploring and analyzing ground-based cloud observations obtained by K-12 students as part of the Students' Cloud Observations On-Line (S'COOL) Project, and the corresponding satellite data. This project began in 1997. The primary analysis tools developed for it were in FORTRAN, a computer language none of the students were familiar with. While they persevered through computer challenges and picky syntax, it eventually became obvious that this was not the most fruitful approach for a project aimed at motivating K-12 students to do their own data analysis. Thus, about halfway through the summer the group shifted its focus to more modern data analysis and visualization tools, namely spreadsheets and Google(tm) Earth. The result of their efforts, so far, is two different Excel spreadsheets and a Google(tm) Earth file. The spreadsheets are set up to allow participating classrooms to paste in a particular dataset of interest, using the standard S'COOL format, and easily perform a variety of analyses and comparisons of the ground cloud observation reports and their correspondence with the satellite data. This includes summarizing cloud occurrence and cloud cover statistics, and comparing cloud cover measurements from the two points of view. A visual classification tool is also provided to compare the cloud levels reported from the two viewpoints. This provides a statistical counterpart to the existing S'COOL data visualization tool, which is used for individual ground-to-satellite correspondences. The Google(tm) Earth file contains a set of placemarks and ground overlays to show participating students the area around their school that the satellite is measuring. This approach will be automated and made interactive by the S'COOL database expert and will also be used to help refine the latitude/longitude location of the participating schools. Once complete, these new data analysis tools will be posted on the S'COOL website for use by the project participants in schools around the US and the world.

Chambers, L. H.↗

Droplet Number Concentration Value-Added Product

The ndrop_mfrsr value-added product (VAP) provides an estimate of the cloud droplet number concentration of overcast water clouds retrieved from cloud optical depth from the multi-filter rotating shadowband radiometer (MFRSR) instrument and liquid water path (LWP) retrieved from the microwave radiometer (MWR). When cloud layer information is available from vertically pointing lidar and radars in the Active Remote Sensing of Clouds (ARSCL) product, the VAP also provides estimates of the adiabatic LWP and an adiabatic parameter (beta) that indicates how divergent the LWP is from the adiabatic case. quality control (QC) flags (qc_drop_number_conc), an uncertainty estimate (drop_number_conc_toterr), and a cloud layer type flag (cloud_base_type) are useful indicators of the quality and accuracy of any given value of the retrieval. Examples of these major input and output variables are given in sample plots in section 6.0.

97 MATHEMATICS AND COMPUTING↗

wacraux (a0)

The W-band ARM Cloud Radar (WACR) systems are zenith-pointing Doppler radars that probe the extent and composition of clouds at 95.04 GHz. The main purpose of this radar is to determine cloud boundaries (e.g., cloud bottoms and tops). This radar reports estimates for the first three spectra moments for each range gate up to 15 km. The 0th moment is reflectivity, the 1st moment is radial velocity, and the 2nd moment is spectral width. Also available are the raw spectra files. Unlike the millimeter wavelength cloud radar (MMCR), the WACR does not use pulse coding and operates in only copolarization and cross-polarization modes.

54 ENVIRONMENTAL SCIENCES↗

wacr (a1)

The W-band ARM Cloud Radar (WACR) systems are zenith-pointing Doppler radars that probe the extent and composition of clouds at 95.04 GHz. The main purpose of this radar is to determine cloud boundaries (e.g., cloud bottoms and tops). This radar reports estimates for the first three spectra moments for each range gate up to 15 km. The 0th moment is reflectivity, the 1st moment is radial velocity, and the 2nd moment is spectral width. Also available are the raw spectra files. Unlike the millimeter wavelength cloud radar (MMCR), the WACR does not use pulse coding and operates in only copolarization and cross-polarization modes.

54 ENVIRONMENTAL SCIENCES↗

Overview of the Nephele Perturbed Parameter Ensemble for Aerosol‐Cloud Interactions in E3SMv3

Aerosol-cloud interactions (aci) are the leading source of uncertainty in inferring climate sensitivity from the historical record. Earth system models (ESMs) struggle to represent aci because the processes responsible for these phenomena occur at much finer time and space scales than can be resolved by any ESM. Observational constraints provide key benchmarks to test ESMs, but cannot be used alone to fully understand aci processes except in very specific cases where causality is controlled; some degree of modeling is required to infer aci and estimate radiative forcing. Here, we generate and characterize a perturbed parameter ensemble (PPE) in version 3 of the Energy Exascale ESM (E3SMv3). We perturb 25 parameters that govern aci processes over 250 members and integrate the model over present-day and preindustrial aerosol emissions. We find that the process representation in E3SMv3 is flexible and can generate global-mean effective radiative forcings due to aci (ERFaci) ranging from −3.0 to +0.9 W m −2 . The positive ERFaci values simulated by a portion of the PPE are implausible and result from parameter combinations that produce unrealistic top-of-atmosphere energy fluxes. While global-mean cloud droplet number concentration always increases in response to anthropogenic aerosol, cloud liquid water path can both increase and decrease, suggesting that precipitation suppression is not the only aerosol-cloud adjustment represented by E3SMv3. Analysis of which processes control liquid cloud adjustment in the PPE points toward stratiform precipitation processes and aerosol activation, which is consistent with many previous ESMs, as well as the new two-moment convective cloud microphysics in E3SMv3.

Nugent, Jacqueline M. [Univ. of Wyoming, Laramie, ↗

An X-ray image of the large magellanic cloud

We have used archival ROSAT Position Sensitive Proportional Counter (PSPC) pointed observations to construct maps of the Large Magellanic Cloud (LMC) in four energy bands between 0.5 and 2.0 keV. These represent the most complete, deepest, and most detailed X-ray images of the LMC to date. While confirming the general morphology of the diffuse LMC emission observed by Wang et al. with Einstein IPC data, these images reveal a wealth of detailed structure of high statistical significance on angular scales from a few arcminutes to a few degrees. In addition, at least twice as many discrete sources are detected as were found using the IPC.

Snowden, S. L.↗

Vertically Resolved Convective–Stratiform Echo-Type Identification and Convectivity Retrieval for Vertically Pointing Radars

Using data from the airborne HIAPER Cloud Radar (HCR), a partitioning algorithm (ECCO-V) that provides vertically resolved convectivity and convective versus stratiform radar-echo classification is developed for vertically pointing radars. The algorithm is based on the calculation of reflectivity and radial velocity texture fields that measure the horizontal homogeneity of cloud and precipitation features. The texture fields are translated into convectivity, a numerical measure of the convective or stratiform nature of each data point. The convective–stratiform classification is obtained by thresholding the convectivity field. Subcategories of low, mid-, and high stratiform, shallow, mid-, deep, and elevated convective, and mixed echoes are introduced, which are based on the melting-layer and divergence-level altitudes. As the algorithm provides vertically resolved classifications, it is capable of identifying different types of vertically layered echoes, and convective features that are embedded in stratiform cloud layers. Its robustness was tested on data from four HCR field campaigns that took place in different meteorological and climatological regimes. The algorithm was adapted for use in spaceborne and ground-based radars, proving its versatility, as it is adaptable not only to different radar types and wavelengths, but also different research applications.

54 ENVIRONMENTAL SCIENCES↗

A Somewhat Detailed Overview of Cloud Impact on the Earth's Radiation Budget

Using a recent edition of CERES EBAF data I will provide an overview of how present-day clouds affect the shortwave and longwave radiation budget of the planet as a whole, and separately its surface and atmosphere. The overview will make the point that different classes of clouds have distinct radiative effects which are also seasonally varying to a substantial degree. I will then show results from my recent work where cloud classes have been defined from active observations according to their vertical stratification. The observed contribution of the various classes to cloud radiative effect components will be detailed, followed by a comparison with a global model where a similar cloud decomposition yields mixed results about the verisimilitude of its cloud-radiation coupling. Time permitting, I will show how cloud classes allow us to build a framework to study the various factors that contribute to cloud radiative effect anomalies.

cloud radiative effect↗

Cloud Condensation Nuclei in Cumulus Humilis — selected Case Study During the CHAPS Campaign

The Cumulus Humilis Aerosol Processing Study (CHAPS) provided a unique opportunity to study aerosol and cloud processing. Clouds play an active role in the processing and cycling of atmospheric constituents. Gases and particles can partition to cloud droplets by absorption and condensation as well as activation and impact scavenging. The U.S. Department of Energy (DOE) G-1 aircraft was used as one of the main platforms in CHAPS. Flight tracks were designed and implemented to characterize freshly emitted aerosols at cloud top and cloud base as well as within the cloud, i.e., cumulus humilis (or fair-weather cumulus), in the vicinity of Oklahoma City. Measurements of interstitial aerosols and residuals of activated condensation cloud nuclei were conducted simultaneously. The interstitial aerosols were measured downstream of an isokinetic inlet, and the activated particles downstream of a counter-flow virtual impactor (CVI). The sampling line to the Aerodyne Aerosol Mass Spectrometer (AMS) was switched between the isokinetic inlet and the CVI to allow characterization of non-activated interstitial particles outside of clouds in contrast to particles activated in clouds. Trace gases including ozone, carbon monoxide, sulfur dioxide, and a series of volatile organic compounds (VOCs) were also measured, as were key meteorological state parameters including liquid water content, cloud drop size, and dew point. We will report on the CCN properties in cumulus humilis. Several approaches will be taken. The first is single-particle analysis of particles collected by the Time-Resolved Aerosol Sampler (TRAC) by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) coupled with energy disperse X-ray spectroscopy (EDX). Specifically, we examine differences between activated and interstitial ones, such as differences in chemical composition and morphology. The second analysis will link in situ measurements by AMS and PTRMS with the observations by TRAC. For instance, by comparing the characteristic m/z obtained by AMS and the CO or isoprene, one can gain more insight into the role of primary and secondary organic aerosols in CCN and background aerosols. Combined with observations of cloud properties, our goal is to provide an improved picture of CCN activation in cumulus humilis.

54 ENVIRONMENTAL SCIENCES↗

Pollutant dispersal in a nonuniform flow

Closed-form solutions are presented for the diffusion of an inert pollutant in a nonuniform flow; matrix analysis is employed to facilitate the solutions. In particular, cases involving an instantaneous point release, a constant point source, and an instantaneous line release are treated. Computations with and without the effects of velocity nonuniformities are given for the dispersal of the ground cloud resulting from the launch of a large rocket (the cloud considered as an instantaneous point source) and the dispersal of an aircraft exhaust (the exhaust considered as an instantaneous line release). In both cases the velocity nonuniformities have important effects on the computations.

Smith, G. L.↗

Factors Governing Cloud Growth and Entrainment Rates in Shallow Cumulus and Cumulus Congestus During GoAmazon2014/5

Shallow cumulus and cumulus congestus clouds play an important role in the large-scale tropical circulation by mixing heat and moisture vertically and preconditioning the environment for deeper convection. Different representations of these shallow clouds account for much of the spread in General Circulation Model (GCMs) climate sensitivity, potentially because of how entrainment is represented in GCM parameterizations. This study uses observations from the Department of Energy's Atmospheric Radiation Measurement (ARM) mobile facility deployed at Manacapuru, Brazil, during the Green Ocean Amazon (GoAmazon2014/5) Campaign. Environmental thermodynamic profiles and observations of cloud top height (CTH) are used to constrain an entraining plume model to estimate bulk entrainment rates (ERs). Estimates of CTH are obtained from a combination of vertically pointing W-band ARM cloud radar and 1,290 MHz Radar Wind Profiler observations. A combination of radiosonde, microwave radiometer profiler, and microwave radiometer observations provides new best estimates of the environmental thermodynamic state. We quantify uncertainty in ERs considering uncertainties in estimated CTH, environmental thermodynamic properties, and assumed initial parcel characteristics. We find ERs ranging from 0.16 to 2.8 km -1 with an average of 0.58 ± 0.10 km -1 over a selected population of 469 shallow cumulus and cumulus congestus clouds. Using the retrieved estimates of ER, we evaluate several entrainment closures that are currently used in atmospheric models or have been proposed based on theory or large eddy simulation. Finally, entrainment rates in cumulus clouds are weakly correlated with low-level buoyancy, cloud depth, and cloud size.

54 ENVIRONMENTAL SCIENCES↗

Lidar Studies of Clouds at Toronto During the ECLIPS Program

The Experimental Cloud Lidar Pilot Study (ECLIPS) measurement program involves the measurement of cloud optical and physical parameters with vertically pointing ground-based lidars simultaneously with satellites observing the same cloud system from above. Our frequency doubled Nd:YAG lidar transmits about 500 mJ of linearly polarized radiation at each wavelength (532, 1064 nm) with a prf of 20 Hz. An overview of the statistical behavior of cloud physical parameters and optical parameters is presented.

Pal, S. R.↗

Measuring interstellar dust grains from the haloes of binary X-ray sources

A method for determining the location, size distribution, and composition of interstellar dust grains from the haloes of binary X-ray sources is described. The method is based on the time dependence of the halo X-ray emission during an eclipse of the point source. The distance of the dust cloud is inferred directly from observations of the growth of the dark circle around the eclipsed point source. Grain size distribution in the interstellar dust clouds is derived from the halo brightness profile at a given photon energy. The composition of the grains is obtained by observing the spectral features in the total optical depth due to X-ray scattering near the photoionization thresholds of the elements in the grains. The haloes become dim just below the ionization threshold, and sharply increase in function brightness as the photon energy increases beyond the absorption edge of the relevant atom. The method makes it possible to observe and analyze the halo emission during eclipse even without imaging the source. It is suggested that haloes probably account for the soft X-rays observed during eclipses and dips observed in sources including 4U1915-05 and X1755-338.

Xu, Y.↗