Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum modulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Understanding the optoelectronic properties of doped 2D organic-inorganic halide perovskite quantum wells: towards efficient quantum well IR photodetectors

Metal halide perovskite (MHP) multiple quantum wells which consist of multilayers of alternate organic and inorganic layers exhibit large exciton binding energies due to the dielectric confinement between the inorganic and organic layers. These naturally formed multiple quantum wells have strong spin-orbit coupling (SOC) due to the presence of heavy elements in their crystal structures. Although the fundamental properties of 2D MHPs are far from being entirely understood, it is widely accepted that their band edge absorption coefficient results from strong exciton interactions. However, studies demonstrating how different exciton interactions and doping effects influence electronic traps and disorder on the band edge absorption coefficient of 2D MHPs have not been demonstrated. Understanding these interactions in MHPs will allow us to access low energy optical transitions for the fabrication of solution processable short-to-mid-wavelength IR photodetectors (1 – 8 μm). Moreover, upon doping, it is possible to move the Fermi energy into the conduction band (CB) to favorably promote the transport of charges in a working device. Herein, we study the development of 2D MHPs having strong SOC, high carrier mobility, and tunable quantum well structures. Our studies shed light on the design and modulation of fundamental physical phenomena by carefully elucidating the role of dopants (n-type and p-type), exciton heterogeneity, orientation, structure, and bias stress effects on the performance of MHPs as potential IR photodetectors.

36 MATERIALS SCIENCE↗

Optical communication with two-photon coherent states. III - Quantum measurements realizable with photoemissive detectors

Homodyne detection is shown to achieve the same signal-to-noise ratio as the quantum field quadrature measurement, thus providing a receiver which realizes linear modulation TCS performance gain. The full equivalence of homodyne detection and single-quadrature field measurement is established. A heterodyne configuration which uses a TCS image-band oscillator in addition to the usual coherent state local oscillator is studied. Results are obtained by means of a representation theorem which shows that photoemissive detection realizes the photon flux density measurement.

Yuen, H. P.↗

The development and applications of charge-coupled devices for space astronomy

The developments in charge-coupled device technology over the past decade are reviewed, with emphasis on the relevance of these developments to astronomical applications. The characteristics and limitations of current commercial devices are described, and the future requirements on CCDs for space astronomy are summarized for the X-ray and near UV, optical, and infrared wavelength ranges. Emphasis is placed on the commonality of technological development which is called for, including the issues of quantum detection efficiency (photon entrance and depletion depth), charge transfer efficiency, modulation transfer function, output noise level, and array size. The system requirements on focal plane instrumentation for space astronomy are summarized, and shown to have much in common for the different wavelength bands. These requirements are discussed in terms of CCD mosaicing, cryogenic cooling, and electronics. The overlap in CCD developments in the defense, astronomical and commercial arenas is summarized.

Griffiths, R. E.↗

Monolithic III-V/Silicon Spatial Light Modulator

Current techniques for growth of device-quality GaAs on silicon substrates enables fabrication of silicon-based version of photodiode-coupled spatial light modulator. Monolithic photodiode-coupled light-modulator array constructed on silicon substrate by growing InAs/GaAs multiple-quantum-wells over silicon PIN diode layer. Intermediate GaAs buffer layer confines attice-misfit dislocations to vicinity of silicon. Use of silicon makes available wider range of auxiliary on-chip signal-processing circuitry for coding and decoding of data, addition or subtraction of brightness levels, spatial reformatting, and rescaling.

Maserjian, Joseph↗

Feasibility Study of Cargo Airship Transportation Systems Powered by New Green Energy Technologies

The development of transportation systems that use new and sustainable energy technologies is of utmost importance due to the possible future shortfalls that current transportation modes will encounter because of increased volume and costs. The introduction and further research and development of new transportation and energy systems by materials researchers at the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) and the Department of Transportation are discussed in this Technical Memorandum. In this preliminary study, airship concepts were assessed for cargo transportation using various green energy technologies capable of 24-hour operation (i.e., night and day). Two prototype airships were successfully constructed and tested at LaRC to demonstrate their feasibility: one with commercially available solar cells for operation during the daytime and one with microwave rectennas (i.e., rectifying antennas) developed in-house for night-time operation. The test results indicate the feasibility of a cargo transportation airship powered by new green energy sources and wireless power technology. Future applications will exploit new green energy sources that use materials and devices recently developed or are in the process of being developed at LaRC. These include quantum well SiGe solar cells; low, mid-, and high temperature thermoelectric modules; and wireless microwave and optical rectenna devices. This study examines the need and development of new energy sources for transportation, including the current status of research, materials, and potential applications.

Skuza, Jonathan R.↗

Modeling Electro-Optic Frequency Comb Generation as a Pump Source for Quantum Communications

The Quantum Communications group at NASA GRC is focused on developing technologies and system architectures to enable future space-based quantum networks. High-repetition rate pulsed pump lasers are needed because the signal on the quantum channel cannot be amplified, hence entanglement generation rates can only be increased through high-rate pumping. Additionally, tunability in center frequency, pulse width, and repetition rate allows for a wider parameter space over which to optimize quantum channel frequency conversion efficiency, joint spectral engineering, and channel synchronization for high-fidelity entanglement swapping –a necessary stepping-stone towards quantum repeater development. One of the most flexible methods for high-repetition rate pulse generation is through spectral shaping–generating a frequency comb from a continuous-wave(CW)laser using electro-optic modulators (EOMs). As a result, this project focuses on analytically modeling and simulating the effects various EOMs such as phase and intensity modulators have on a CW source. Generating a tunable frequency comb as the pump source allows us to conveniently fine-tune the central frequency, repetition rate, and the spectral shape of our source to match the strict optimal parameters for any given entanglement source considered in the future. These models and simulations are to be used for comparison purposes for future experiments as well as for providing the Quantum Communications group a convenient tool to understand the effects of manipulating various parameters have on the outgoing frequency comb.

Electro-optic modulator↗

Determination of modulation transfer function of a printer by measuring the autocorrelation of the transmission function of a printed Ronchi grating

We show theoretically and verify experimentally that the modulation transfer function (MTF) of a printing system can be determined by measuring the autocorrelation of a printed Ronchi grating. In practice, two similar Ronchi gratings are printed on two transparencies and the transparencies are superimposed with parallel grating lines. Then, the gratings are uniformly illuminated and the transmitted light from a large section is measured versus the displacement of one grating with respect to the other in a grating pitch interval. This measurement provides the required autocorrelation function for determination of the MTF.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Trade-offs in sensitivity and sampling depth in bimodal atomic force microscopy and comparison to the trimodal case

This paper presents experiments on Nafion ® proton exchange membranes and numerical simulations illustrating the trade-offs between the optimization of compositional contrast and the modulation of tip indentation depth in bimodal atomic force microscopy (AFM). We focus on the original bimodal AFM method, which uses amplitude modulation to acquire the topography through the first cantilever eigenmode, and drives a higher eigenmode in open-loop to perform compositional mapping. This method is attractive due to its relative simplicity, robustness and commercial availability. We show that this technique offers the capability to modulate tip indentation depth, in addition to providing sample topography and material property contrast, although there are important competing effects between the optimization of sensitivity and the control of indentation depth, both of which strongly influence the contrast quality. Furthermore, we demonstrate that the two eigenmodes can be highly coupled in practice, especially when highly repulsive imaging conditions are used. Finally, we also offer a comparison with a previously reported trimodal AFM method, where the above competing effects are minimized.

36 MATERIALS SCIENCE↗

Prospects for identifying dark matter with CoGeNT

It has previously been shown that the excess of events reported by the CoGeNT collaboration could be generated by elastically scattering dark matter particles with a mass of approximately 5–15 GeV. This mass range is very similar to that required to generate the annual modulation observed by DAMA/LIBRA and the gamma rays from the region surrounding the Galactic Center identified within the data of the Fermi Gamma Ray Space Telescope. To confidently conclude that CoGeNT's excess is the result of dark matter, however, further data will likely be needed. In this paper, we make projections for the first full year of CoGeNT data, and for its planned upgrade. Not only will this body of data more accurately constrain the spectrum of nuclear recoil events, and corresponding dark matter parameter space, but will also make it possible to identify seasonal variations in the rate. In particular, if the CoGeNT excess is the product of dark matter, then one year of CoGeNT data will likely reveal an annual modulation with a significance of 2-3σ. The planned CoGeNT upgrade will not only detect such an annual modulation with high significance, but will be capable of measuring the energy spectrum of the modulation amplitude. These measurements will be essential to irrefutably confirming a dark matter origin of these events.

79 ASTRONOMY AND ASTROPHYSICS↗

Large-area SnO{sub 2}: F thin films by offline APCVD

Highlights: {yields} Large-area (1245 mm x 635 mm) FTO thin films were successfully deposited by offline APCVD process. {yields} The as-prepared FTO thin films with sheet resistance 8-11 {Omega}/{open_square} and direct transmittance more than 83% exhibited better than that of the online ones. {yields} The maximum quantum efficiency of the solar cells based on offline FTO substrate was 0.750 at wavelength 540 nm. {yields} The power of the solar modules using the offline FTO as glass substrates was 51.639 W, higher than that of the modules based on the online ones. -- Abstract: In this paper, we reported the successful preparation of fluorine-doped tin oxide (FTO) thin films on large-area glass substrates (1245 mm x 635 mm x 3 mm) by self-designed offline atmospheric pressure chemical vapor deposition (APCVD) process. The FTO thin films were achieved through a combinatorial chemistry approach using tin tetrachloride, water and oxygen as precursors and Freon (F-152, C2H4F2) as dopant. The deposited films were characterized for crystallinity, morphology (roughness) and sheet resistance to aid optimization of materials suitable for solar cells. We got the FTO thin films with sheet resistance 8-11 {Omega}/{open_square} and direct transmittance more than 83%. X-ray diffraction (XRD) characterization suggested that the as-prepared FTO films were composed of multicrystal, with the average crystal size 200-300 nm and good crystallinity. Further more, the field emission scanning electron microscope (FESEM) images showed that the films were produced with good surface morphology (haze). Selected samples were used for manufacturing tandem amorphous silicon (a-Si:H) thin film solar cells and modules by plasma enhanced chemical vapor deposition (PECVD). Compared with commercially available FTO thin films coated by online chemical vapor deposition, our FTO coatings show excellent performance resulting in a high quantum efficiency yield for a-Si:H solar cells and ideal open voltage and short circuit current for a-Si:H solar modules.

36 MATERIALS SCIENCE↗

Wave-function engineering and absorption spectra in Si{sub 0.16}Ge{sub 0.84}/Ge{sub 0.94}Sn{sub 0.06}/Si{sub 0.16}Ge{sub 0.84} strained on relaxed Si{sub 0.10}Ge{sub 0.90} type I quantum well

We theoretically investigate germanium-tin alloy as a semiconductor for the design of near infrared optical modulators in which the Ge{sub 1−x}Sn{sub x} alloy is the active region. We have calculated the electronic band parameters for heterointerfaces between strained Ge{sub 1−x}Sn{sub x} and relaxed Si{sub 1−y}Ge{sub y}. Then, a type-I strain-compensated Si{sub 0.10}Ge{sub 0.90}/Si{sub 0.16}Ge{sub 0.84}/Ge{sub 0.94}Sn{sub 0.06} quantum well heterostructure optimized in terms of compositions and thicknesses is studied by solving Schrödinger equation without and under applied bias voltage. The strong absorption coefficient (>1.5 × 10{sup 4} cm{sup −1}) and the shift of the direct transition under large Stark effect at 3 V are useful characteristics for the design of optoelectronic devices based on compressively strained IV-IV heterostructures at near infrared wavelengths.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Roadmap for Photonics with 2D Materials

Triggered by advances in atomic-layer exfoliation and growth techniques, along with the identification of a wide range of extraordinary physical properties in self-standing films consisting of one or a few atomic layers, two-dimensional (2D) materials such as graphene, transition metal dichalcogenides (TMDs), and other van der Waals (vdW) crystals now constitute a broad research field expanding in multiple directions through the combination of layer stacking and twisting, nanofabrication, surface-science methods, and integration into nanostructured environments. Photonics encompasses a multidisciplinary subset of those directions, where 2D materials contribute remarkable nonlinearities, long-lived and ultraconfined polaritons, strong excitons, topological and chiral effects, susceptibility to external stimuli, accessibility, robustness, and a completely new range of photonic materials based on layer stacking, gating, and the formation of moiré patterns. These properties are being leveraged to develop applications in electro-optical modulation, light emission and detection, imaging and metasurfaces, integrated optics, sensing, and quantum physics across a broad spectral range extending from the far-infrared to the ultraviolet, as well as enabling hybridization with spin and momentum textures of electronic band structures and magnetic degrees of freedom. The rapid expansion of photonics with 2D materials as a dynamic research arena is yielding breakthroughs, which this Roadmap summarizes while identifying challenges and opportunities for future goals and how to meet them through a wide collection of topical sections prepared by leading practitioners.

2D materials↗

Electric field-induced transport modulation in VO{sub 2} FETs with high-k oxide/organic parylene-C hybrid gate dielectric

We report on the observation of reversible and immediate resistance switching by high-k oxide Ta{sub 2}O{sub 5}/organic parylene-C hybrid dielectric-gated VO{sub 2} thin films. Resistance change ratios at various temperatures in the insulating regime were demonstrated to occur in the vicinity of phase transition temperature. We also found an asymmetric hole-electron carrier modulation related to the suppression of phase transition temperature. The results in this research provide a possibility for clarifying the origin of metal-insulator transition in VO{sub 2} through the electrostatic field-induced transport modulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Amplification of dissipative solitons with a polarisation-maintaining tapered fibre amplifier

The generation of strongly chirped dissipative solitons offers great opportunities for generating high-power laser pulses of short duration. We demonstrate the possibility of amplifying such pulses in a polarisation-maintaining tapered fibre having 32 μm mode diameter at the output end. Highly chirped pulses with a repetition rate of 14.3 MHz and a duration of 10 ps at 1055 nm centre wavelength are amplified in an all-fibre circuit to 2.11 μJ energy and compressed by diffraction gratings to a duration of ∼297 fs. Reducing the pulse repetition rate to 1 MHz allows a 16.5 μJ output pulse energy to be achieved without manifestations of SRS and self-phase modulation in the spectrum. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced modulation rates via field modulation in spin torque nano-oscillators

Spin Transfer Nano-Oscillators (STNOs) are promising candidates for telecommunications applications due to their frequency tuning capabilities via either a dc current or an applied field. This frequency tuning is of interest for Frequency Shift Keying concepts to be used in wireless communication schemes or in read head applications. For these technological applications, one important parameter is the characterization of the maximum achievable rate at which an STNO can respond to a modulating signal, such as current or field. Previous studies of in-plane magnetized STNOs on frequency modulation via an rf current revealed that the maximum achievable rate is limited by the amplitude relaxation rate Γ{sub p}, which gives the time scale over which amplitude fluctuations are damped out. This might be a limitation for applications. Here, we demonstrate via numerical simulation that application of an additional rf field is an alternative way for modulation of the in-plane magnetized STNO configuration, which has the advantage that frequency modulation is not limited by the amplitude relaxation rate, so that higher modulation rates above GHz are achievable. This occurs when the modulating rf field is oriented along the easy axis (longitudinal rf field). Tilting the direction of the modulating rf field in-plane and perpendicularly with respect to the easy axis (transverse rf field), the modulation is again limited by the amplitude relaxation rate similar to the response observed in current modulation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dependence of the molecular iodine B-state predissociation induced by a femtosecond laser pulse on pulse phase modulation

The processes of pumping and laser-induced predissociation of B-states of the I{sub 2} molecule under the action of femtosecond laser pulses are considered theoretically. An analytical formula is derived, which describes the dependence of the predissociation on such parameters of femtosecond pulses as spectral chirp, spectral width and delay time between pulses. The formula is used to calculate numerically the dependence of the predissociation yield on the parameters of the phase modulation of the pump pulse and coupling pulse.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synchronization of dust density waves in anodic plasmas

Dust clouds can be confined in anodic plasmas by an equilibrium of the electric field force and the ion drag force. In these dust clouds self-excited dust density waves are observed as soon as the cloud length exceeds typical wavelengths. By superimposing an external modulation signal on the anode bias, the self-excited wave can be synchronized at the modulation frequency when the frequency is close to the natural frequency of the self-excited wave. For very low frequencies, an interaction of the center of mass motion of the cloud with the self-excited wave is found. For intermediate frequencies, close to the natural frequency of the self-excited modes, entrainment is observed, and for slightly higher frequencies a spatial cascade to subharmonic modes is found. At the highest frequencies, an influence of the modulation is still present, the wave is entrained if the modulation frequency is close to a rational factor of the natural frequency, as can be seen by the narrowing of the spectral components.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Singlet fission efficiency in tetracene-based organic solar cells

Singlet exciton fission splits one singlet exciton into two triplet excitons. Using a joint analysis of photocurrent and fluorescence modulation under a magnetic field, we determine that the triplet yield within optimized tetracene organic photovoltaic devices is 153% ± 5% for a tetracene film thickness of 20 nm. The corresponding internal quantum efficiency is 127% ± 18%. These results are used to prove the effectiveness of a simplified triplet yield measurement that relies only on the magnetic field modulation of fluorescence. Despite its relatively slow rate of singlet fission, the measured triplet yields confirm that tetracene is presently the best candidate for use with silicon solar cells.

36 MATERIALS SCIENCE↗