Search NASA⌕ Search

SEARCH · Search NASA

Results for “specific correlation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Development of Multi-physics (Multiphase CFD + MCNP) simulation for generic solution vessel power calculation

The current study aims to predict the steady state power of a generic solution vessel and to develop a corresponding heat transfer coefficient correlation for a Moly99 production facility by conducting a fully coupled multi-physics simulation. A prediction of steady state power for the current application is inherently interconnected between thermal hydraulic characteristics (i.e. Multiphase computational fluid dynamics solved by ANSYS-Fluent 17.2) and the corresponding neutronic behavior (i.e. particle transport solved by MCNP6.2) in the solution vessel. Thus, the development of a coupling methodology is vital to understand the system behavior at a variety of system design and postulated operating scenarios. In this study, we report on the k-effective (keff) calculation for the baseline solution vessel configuration with a selected solution concentration using MCNP K-code modeling. The associated correlation of thermal properties (e.g. density, viscosity, thermal conductivity, specific heat) at the selected solution concentration are developed based on existing experimental measurements in the open literature. The numerical coupling methodology between multiphase CFD and MCNP is successfully demonstrated, and the detailed coupling procedure is documented. In addition, improved coupling methods capturing realistic physics in the solution vessel thermal-neutronic dynamics are proposed and tested further (i.e. dynamic height adjustment, mull-cell approach). As a key outcome of the current study, a multi-physics coupling methodology between MCFD and MCNP is demonstrated and tested for four different operating conditions. Those different operating conditions are determined based on the neutron source strength at a fixed geometry condition. The steady state powers for the generic solution vessel at various operating conditions are reported, and a generalized correlation of the heat transfer coefficient for the current application is discussed. The assessment of multi-physics methodology and preliminary results from various coupled calculations (power prediction and heat transfer coefficient) can be further utilized for the system code validation and generic solution vessel design improvement.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRSDate not supplied

A Generalized, Compactly-Supported Correlation Function for Data Assimilation Applications

Correlation functions play an essential role in modern data assimilation, where they are used to model covariances given a set of tunable parameters or applied as tapering functions to localize covariances in ensemble-based schemes. One of the most widely-used correlation functions in data assimilation is the Gaspari and Cohn (1999) piecewise-rational, compactly-supported parametric correlation function (hereafter referred to as GC99). The GC99 correlation function is useful due to its tunable cut-off parameter c and Gaussian-like shape achieved when the parameter a is set to one-half. These properties are attractive for tapering functions in data assimilation applications. However, the GC99 correlation function is homogeneous over Euclidean 3-space and isotropic when restricted to the sphere, properties that may be less than ideal for some geophysical applications. GC99 is also compactly-supported on a sphere of fixed radius, which requires tuning of the cut-off parameter c that can depend on the specific application. This work presents a generalization of the GC99 correlation function that allows the cut-off parameter c and shape parameter a to vary over space to gain more flexibility in shape while maintaining its compact support property. The function, which we call the Generalized Gaspari Cohn (GenGC) correlation function, introduces inhomogeneity in Euclidean 3-space and anisotropy when restricted to the sphere by allowing both parameters c and a to vary, as functions, over the spatial domain. The GC99 correlation function is a special case of GenGC where the functions c and a are held constant, as fixed parameters rather than functions. The GenGC correlation function also generalizes the follow-on to the work of Gaspari and Cohn (1999) presented in Gaspari et al. (2006), which allowed a to vary while keeping c fixed. We illustrate through simple one- and two-dimensional examples the variety of inhomogeneous and anisotropic correlation functions GenGC can produce by varying c and a over space, and suggest applications where they may be useful in data assimilation, such as covariance modeling or localization. In particular, we describe how the GenGC correlation function can be used to construct covariances using correlation length and variance fields derived from dynamics. For example, the correlation length field for advective dynamics is governed by a partial differential equation (PDE) in N spatial dimensions, where N is the number of space dimensions of the state. Correlation length fields can be determined from this PDE and used with GenGC to construct the corresponding correlations. We can then approximate the full covariance by rescaling by the variance, which also satisfies a PDE in N spatial dimensions for advective dynamics. Thus we can approximate the full covariance without solving the covariance PDE, which is in 2N spatial dimensions, by solving just two PDEs each in only N spatial dimensions. This approach to evolving the correlation length and variance fields, then reconstructing the correlations using GenGC, is suggested as an alternative to current methods of covariance modeling in data assimilation algorithms.

GC99↗
DOE OSTI2017

Determination of critical experiment correlations for experiments involving arrays of low-enriched fuel rods

Quantifying correlations among critical experiments has become a topic of interest over the last 10-15 years. Correlations arise from the shared use of fissile material, non-fissile materials, fixtures, and procedures in multiple experiments or multiple experiment series. A Monte-Carlo sampling technique proposed as a viable technical method to evaluate these correlations has been implemented in the SCALE 6.2 Sampler sequence. This paper presents an investigation of the use of this new tool and technique for low-enriched uranium pin array experiments with a thermal neutron energy spectrum. The Nuclear Energy Agency's Expert Group on Uncertainty Analyses for Criticality Safety Assessments has been examining methods of calculating the correlation coefficients among experiments from the LCT-007 and LCT-039 series. Results for two scenarios are presented to demonstrate the impact of pin pitch uncertainty modeling on the correlation coefficients. The convergence of the correlation coefficients is also investigated. Additional studies examine the impact of the stochastic uncertainty and the use of continuous-energy Monte-Carlo for individual realizations on the correlation coefficients. Correlation coefficients are also determined for the LCT-042 experiment series. This experiment series differs from other experiments because unique poison panels and fuel array separation distances may reduce correlation of the individual experiments within the series. The effects of pin pitch uncertainty and stochastic uncertainty are also examined for this series. Comparing the results of the two sets of experiments shows potential conclusions that can be drawn regarding viability of the Monte-Carlo sampling technique for determining critical experiment correlations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
NASA NTRS2011

An Inverse Modeling Approach to Estimating Phytoplankton Pigment Concentrations from Phytoplankton Absorption Spectra

Phytoplankton absorption spectra and High-Performance Liquid Chromatography (HPLC) pigment observations from the Eastern U.S. and global observations from NASA's SeaBASS archive are used in a linear inverse calculation to extract pigment-specific absorption spectra. Using these pigment-specific absorption spectra to reconstruct the phytoplankton absorption spectra results in high correlations at all visible wavelengths (r(sup 2) from 0.83 to 0.98), and linear regressions (slopes ranging from 0.8 to 1.1). Higher correlations (r(sup 2) from 0.75 to 1.00) are obtained in the visible portion of the spectra when the total phytoplankton absorption spectra are unpackaged by multiplying the entire spectra by a factor that sets the total absorption at 675 nm to that expected from absorption spectra reconstruction using measured pigment concentrations and laboratory-derived pigment-specific absorption spectra. The derived pigment-specific absorption spectra were further used with the total phytoplankton absorption spectra in a second linear inverse calculation to estimate the various phytoplankton HPLC pigments. A comparison between the estimated and measured pigment concentrations for the 18 pigment fields showed good correlations (r(sup 2) greater than 0.5) for 7 pigments and very good correlations (r(sup 2) greater than 0.7) for chlorophyll a and fucoxanthin. Higher correlations result when the analysis is carried out at more local geographic scales. The ability to estimate phytoplankton pigments using pigment-specific absorption spectra is critical for using hyperspectral inverse models to retrieve phytoplankton pigment concentrations and other Inherent Optical Properties (IOPs) from passive remote sensing observations.

Moisan, John R.↗
DOE OSTI2021

The picasso map-making code: application to a simulation of the QUIJOTE northern sky survey

ABSTRACT Map-making is an important step for the data analysis of cosmic microwave background (CMB) experiments. It consists of converting the data, which are typically a long, complex, and noisy collection of measurements, into a map, which is an image of the observed sky. We present in this paper a new map-making code named picasso (Polarization and Intensity CArtographer for Scanned Sky Observations), which was implemented to construct intensity and polarization maps from the Multi Frequency Instrument (MFI) of the QUIJOTE (Q-U-I Joint TEnerife) CMB polarization experiment. picasso is based on the destriping algorithm, and is suited to address specific issues of ground-based microwave observations, with a technique that allows the fit of a template function in the time domain, during the map-making step. This paper describes the picasso code, validating it with simulations and assessing its performance. For this purpose, we produced realistic simulations of the QUIJOTE-MFI survey of the northern sky (approximately ∼20 000 deg2), and analysed the reconstructed maps with picasso, using real and harmonic space statistics. We show that, for this sky area, picasso is able to reconstruct, with high fidelity, the injected signal, recovering all the scales with ℓ > 10 in TT, EE, and BB. The signal error is better than 0.001 per cent at 20 < ℓ < 200. Finally, we validated some of the methods that will be applied to the real wide-survey data, like the detection of the CMB anisotropies via cross-correlation analyses. Despite that the implementation of picasso is specific for QUIJOTE-MFI data, it could be adapted to other experiments.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

The role of leaf width and conductances to CO 2 in determining water use efficiency in C 4 grasses

C 4 plants achieve higher photosynthesis (An) and intrinsic water use efficiency (iWUE) than C 3 plants, but processes underpinning the variability in An and iWUE across the three C 4 subtypes remain unclear, partly because we lack an integrated framework for quantifying the contribution of diffusional and biochemical limitations to C 4 photosynthesis. We exploited the natural diversity among C 4 grasses to develop an original mathematical approach for estimating eight key processes of C 4 photosynthesis and their relative limitations to An. We also developed a new formulation to estimate mesophyll conductance (gm) based on actual hydration rates of CO 2 by carbonic anhydrases. We found a positive relationship between gm and iWUE and an inverse correlation with gsw among C 4 grasses. We also revealed subtype-specific regulatory processes of iWUE that may be related to known anatomical traits characterising each C 4 subtype. Leaf width was an important determinant of iWUE and showed significant correlations with key limitations of An, especially among NADP-ME species. In conclusion, incorporating leaf width in breeding trials may unlock new opportunities for C 4 crops because the revealed negative relationship between leaf width and iWUE may translate into higher crop and canopy WUE.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2013

Interannual Variation in Phytoplankton Primary Production at a Global Scale

We used the NASA Ocean Biogeochemical Model (NOBM) combined with remote sensing data via assimilation to evaluate the contribution of four phytoplankton groups to the total primary production. First, we assessed the contribution of each phytoplankton groups to the total primary production at a global scale for the period 1998-2011. Globally, diatoms contributed the most to the total phytoplankton production ((is)approximately 50%, the equivalent of 20 PgC·y1). Coccolithophores and chlorophytes each contributed approximately 20% ((is) approximately 7 PgC·y1) of the total primary production and cyanobacteria represented about 10% ((is) approximately 4 PgC·y1) of the total primary production. Primary production by diatoms was highest in the high latitudes ((is) greater than 40 deg) and in major upwelling systems (Equatorial Pacific and Benguela system). We then assessed interannual variability of this group-specific primary production over the period 1998-2011. Globally the annual relative contribution of each phytoplankton groups to the total primary production varied by maximum 4% (1-2 PgC·y1). We assessed the effects of climate variability on group-specific primary production using global (i.e., Multivariate El Niño Index, MEI) and "regional" climate indices (e.g., Southern Annular Mode (SAM), Pacific Decadal Oscillation (PDO) and North Atlantic Oscillation (NAO)). Most interannual variability occurred in the Equatorial Pacific and was associated with climate variability as indicated by significant correlation (p (is) less than 0.05) between the MEI and the group-specific primary production from all groups except coccolithophores. In the Atlantic, climate variability as indicated by NAO was significantly correlated to the primary production of 2 out of the 4 groups in the North Central Atlantic (diatoms/cyanobacteria) and in the North Atlantic (chlorophytes and coccolithophores). We found that climate variability as indicated by SAM had only a limited effect on group-specific primary production in the Southern Ocean. These results provide a modeling and data assimilation perspective to phytoplankton partitioning of primary production and contribute to our understanding of the dynamics of the carbon cycle in the oceans at a global scale.

Coccolithophores↗
DOE OSTI2022

Fractional correlated insulating states at one-third filled magic angle twisted bilayer graphene

Abstract The observation of superconductivity and correlated insulating states in twisted bilayer graphene has motivated much theoretical progress at integer fillings. However, little attention has been given to fractional fillings. Here we show that the three-peak structure of Wannier orbitals, dictated by the symmetry and topology of flat bands, facilitates the emergence of a state we name a “fractional correlated insulator” at commensurate fractional filling of ν = n ± 1/3. Specifically for the filling of 1/3 electrons per moiré unit cell, we show that short-range interactions lead to an extensive entropy due to the “breathing” degree of freedom of an irregular honeycomb lattice that emerges through defect lines. The leading further-range interaction lifts this degeneracy and selects a ferromagnetic nematic state that breaks AB/BA sublattice symmetry. The proposed fractional correlated insulating state might underlie the suppression of superconductivity at ν = 2 − 1/3 filling observed in ref. 1 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1983

Shuttle orbiter boundary layer transition at flight and wind tunnel conditions

Hypersonic boundary layer transition data obtained on the windward centerline of the Shuttle orbiter during entry for the first five flights are presented and analyzed. Because the orbiter surface is composed of a large number of thermal protection tiles, the transition data include the effects of distributed roughness arising from tile misalignment and gaps. These data are used as a benchmark for assessing and improving the accuracy of boundary layer transition predictions based on correlations of wind tunnel data taken on both aerodynamically rough and smooth orbiter surfaces. By comparing these two data bases, the relative importance of tunnel free stream noise and surface roughness on orbiter boundary layer transition correlation parameters can be assessed. This assessment indicates that accurate predications of transition times can be made for the orbiter at hypersonic flight conditions by using roughness dominated wind tunnel data. Specifically, times of transition onset and completion is accurately predicted using a correlation based on critical and effective values of a roughness Reynolds number previously derived from wind tunnel data.

Goodrich, W. D.↗
NASA NTRS2008

CFD Modeling of Superheated Fuel Sprays

An understanding of fuel atomization and vaporization behavior at superheat conditions is identified to be a topic of importance in the design of modern supersonic engines. As a part of the NASA aeronautics initiative, we have undertaken an assessment study to establish baseline accuracy of existing CFD models used in the evaluation of a ashing jet. In a first attempt towards attaining this goal, we have incorporated an existing superheat vaporization model into our spray solution procedure but made some improvements to combine the existing models valid at superheated conditions with the models valid at stable (non-superheat) evaporating conditions. Also, the paper reports some validation results based on the experimental data obtained from the literature for a superheated spray generated by the sudden release of pressurized R134A from a cylindrical nozzle. The predicted profiles for both gas and droplet velocities show a reasonable agreement with the measured data and exhibit a self-similar pattern similar to the correlation reported in the literature. Because of the uncertainty involved in the specification of the initial conditions, we have investigated the effect of initial droplet size distribution on the validation results. The predicted results were found to be sensitive to the initial conditions used for the droplet size specification. However, it was shown that decent droplet size comparisons could be achieved with properly selected initial conditions, For the case considered, it is reasonable to assume that the present vaporization models are capable of providing a reasonable qualitative description for the two-phase jet characteristics generated by a ashing jet. However, there remains some uncertainty with regard to the specification of certain initial spray conditions and there is a need for experimental data on separate gas and liquid temperatures in order to validate the vaporization models based on the Adachi correlation for a liquid involving R134A.

Raju, M. S.↗
DOE OSTI2024

Imaging the Wake of a Jet with Energy Correlators

In heavy ion collisions, jets are formed during the initial hard scattering event and move through the quark-gluon plasma (QGP) as it evolves. The evolution of the medium manifests itself on the jet via various jet-medium interactions, modifying its substructure as compared to vacuum QCD. Recently, the energy correlator observable has been shown to be a powerful method to decode correlations in pp collisions through measurements in ALICE, CMS and STAR. Additionally, recent studies have shown the sensitivity of this observable to medium modification due to the QGP. In this work [1], we perform the first study of the three-point energy correlator for medium modified jets, to show how it can be used to map out the shape of medium induced modifications. We illustrate this for the specific case of the Hybrid Model, where we show how higher-point correlation functions can image the wake of a jet.

Rai, Ananya [Yale University, New Haven, CT (Unite↗
DOE OSTI2018

Correlative Raman spectroscopy and focused ion beam for targeted phase boundary analysis of titania polymorphs

Site-specific preparation of specimens using focused ion beam instruments for transmission electron microscopy is at the forefront of targeting regions of interest for nanoscale characterization. Typical methods of pinpointing desired features include electron backscatter diffraction for differentiating crystal structures and energy-dispersive X-Ray spectroscopy for probing compositional variations. Yet there are situations, notably in the titanium dioxide system, where these techniques can fail. Differentiating between the brookite and anatase polymorphs of titania is either excessively laborious or impossible with the aforementioned techniques. However, due to differences in bonding structure, Raman spectroscopy serves as an ideal candidate for polymorph differentiation. In this work, a correlative approach utilizing Raman spectroscopy for targeted focused ion beam specimen preparation was employed. Dark field imaging and diffraction in the transmission electron microscope confirmed the region of interest located via Raman spectroscopy and demonstrated the validity of this new method. Correlative Raman spectroscopy, scanning electron microscopy, and focused ion beam is shown to be a promising new technique for identifying site-specific preparation of nanoscale specimens in cases where conventional approaches do not suffice.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Discerning element and site-specific fluctuations of the charge-orbital order in Fe 3 O 4 below the Verwey transition

Despite countless experimental probes into magnetite's electronic structure across the Verwey transition Fe 3 O 4 , the exact origin of this archetypical metal-insulator transition remains a puzzle. Advanced x-ray diffraction techniques have mostly resolved the monoclinic structure of the insulating phase, including interatomic bond lengths, but the complexity of the charge-orbitally ordered state is difficult to disentangle. Here we combined resonant elastic x-ray scattering and x-ray photon correlation spectroscopy to probe charge-orbital fluctuations in the insulating state of magnetite. By accessing the Bragg forbidden $(00\frac{1}{2})_{c}$ peak at the oxygen K-edge, we complement our previous study on the iron L 3 – edge to reveal the dynamics of the iron 3d and oxygen 2p orbital domains. Our new results reveal a decoupling of the orbital correlation lengths between the oxygen 2p states and site-specific iron 3d states, and we further show charge-orbital domain fluctuations at the iron t 2g orbital sites of trimeron chains. These results also demonstrate an experimental method capable of distinguishing electronic dynamics between the oxygen ligands and the transition metal that underpins emergent behaviors in complex oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Study of rare earth local moment magnetism and strongly correlated phenomena in various crystal structures

Benefiting from unique properties of 4f electrons, rare earth based compounds are known for offering a versatile playground for condensed matter physics research as well as industrial applications. This thesis focuses on three specific examples that further explore the rare earth local moment magnetism and strongly correlated phenomena in various crystal structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2017

Gaining the most utility from our geospace observational system: Network analysis of total electron content as a means to understand space weather to the point of prediction

We present the first network analysis of interplanetary magnetic field (IMF) clock angle dependent, high-latitude, hemispheric-specific total electron content (TEC) data. We examine network parameters to describe spatio-temporal correlations in the TEC data for January 2016. We find that significant network structure exists distinguishing the dayside and nightside ionosphere, and specific features in the high-latitudes (cusp/ionospheric footpoints of magnetospheric boundary layers, polar cap, and auroral zone), and that these features vary with IMF clock angle. In this brief summary paper, we provide proof of concept results and identify important areas of future research, providing a basis for the discussion of network analysis and machine learning approaches for space weather applications.

Malik, Nishant↗
DOE OSTI2025

A Review of the Influence of Processing Parameters on ODS Steels Produced via Additive Manufacturing Techniques

Abstract This paper reviews current observations regarding processing conditions for oxide dispersion-strengthened steels consolidated through additive manufacturing techniques. Variations in ODS steels observed across process parameters include changes in grain size, grain texture, oxide size, density of oxides, porosity, melt pool characteristics, and mechanical properties. These properties were then compared across techniques to understand which techniques and processing conditions lead to the highest strength, ductility, and oxide density. Current literature suggests that a mix of grain types, in the form of either morphology or phase, can significantly increase the strength of printed ODS steels. Meanwhile, the most ductile samples, regardless of consolidation technique or matrix material, were made from feedstock with oxide additions located on the powder surface. Reported grain and oxide sizes were plotted against the ratio of laser power to scan speed, volumetric energy density, and normalized enthalpy. No strong correlation between these values and microstructural features was observed. The plots that were made suggest that a larger data set, more in-depth representative equations, and more defined material properties as a function of specific feedstock used are necessary to determine a value that can be correlated to the printed ODS steel microstructure.

deJong, Matthew↗
DOE OSTI2020

Conservative Release Fraction Correlation for Spray Releases

Washington River Protection Solutions, LLC (WRPS) is planning to conduct repairs in the Liquid Effluent Retention Facility (LERF), and prior to conducting this work they will re-evaluate the hazard category designation for LERF. As part of this evaluation, WRPS needs estimates of the release fraction of potential accidental sprays, because a spray release is a potential bounding accident. Pacific Northwest National Laboratory previously developed a conservative correlation for the cumulative generation rate (volume per time) of aerosol droplets less than or equal to specific sizes from spray releases as a function of the spray pressure, orifice area, and droplet diameter. To obtain release fraction estimates from the conservative generation rate correlation, the correlation needs to be recast by dividing the aerosol generation rate by the flow rate of a spray. In the current study, a conservative release fraction correlation was developed from the conservative aerosol generation rate correlation developed previously by dividing the generation rate correlation by the flow rate of a spray using an orifice flow rate equation and then this correlation was adjusted to be conservative. Test data were also extrapolated to a lower pressure than the lowest pressure tested (100 psig) for the spray data used for developing the previous conservative generation rate correlation. The new conservative release fraction correlation was then used to predict release fractions of respirable droplets (droplets = 10 µm) for four specific pipes that are part of LERF.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗