Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface morphologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

A Perspective into Operando Methods for Probing Catalytic Interfaces

Rational design of electrocatalysts for (photo)electrochemical (PEC) processes like hydrogen and oxygen evolution and CO2 reduction reactions is aided by the recent improvements in capabilities of operando measurements, where morphology, composition, and/or function are probed during active catalysis. Through operando microscopy and spectroscopy, structure, catalytic microenvironment, oxidation state, adsorbates, and products can be measured to gain a better understanding of catalyst behavior and suggest possible improvements. Visualizing evolving catalyst morphologies, surface compositions, and electrochemical behavior also helps address many fundamental research questions for a better understanding of catalytic mechanisms. Correlating morphology with chemical identity or functional behavior using a variety of innovative microscopy methods is particularly promising for guiding development of next generation catalysts, and there are also many recent examples of using AI and robotics tools to innovate and speed development. In this Perspective, advances made over the past few years in operando imaging of catalysts relevant to solar fuels will be explored, followed by an outlook on technological developments in instrumentation, sample design, and computational power that may be applied to this field.

Catalysts↗

Raman and AFM study of gamma irradiated plastic bottle sheets

In this investigation, the effects of gamma irradiation on the structural properties of plastic bottle sheet are studied. The Plastic sheets were exposed with 1.25MeV {sup 60}Co gamma rays source at various dose levels within the range from 0-670 kGy. The induced modifications were followed by micro-Raman and atomic force microscopy (AFM). The Raman spectrum shows the decrease in Raman intensity and formation of unsaturated bonds with an increase in the gamma dose. AFM image displays rough surface morphology after irradiation. The detailed Raman analysis of plastic bottle sheets is presented here, and the results are correlated with the AFM observations.

36 MATERIALS SCIENCE↗

Shape variation of micelles in polymer thin films

The equilibrium properties of block copolymer micelles confined in polymer thin films are investigated using self-consistent field theory. The theory is based on a model system consisting of AB diblock copolymers and A homopolymers. Two different methods, based on the radius of gyration tensor and the spherical harmonics expansion, are used to characterize the micellar shape. The results reveal that the morphology of micelles in thin films depends on the thickness of the thin films and the selectivity of the confining surfaces. For spherical (cylindrical) micelles, the spherical (cylindrical) symmetry is broken by the presence of the one-dimensional confinement, whereas the top-down symmetry is broken by the selectivity of the confining surfaces. Morphological transitions from spherical or cylindrical micelles to cylinders or lamella are predicted when the film thickness approaches the micellar size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Top-gated chemical vapor deposited MoS{sub 2} field-effect transistors on Si{sub 3}N{sub 4} substrates

We report the electrical characteristics of chemical vapor deposited (CVD) monolayer molybdenum disulfide (MoS{sub 2}) top-gated field-effect transistors (FETs) on silicon nitride (Si{sub 3}N{sub 4}) substrates. We show that Si{sub 3}N{sub 4} substrates offer comparable electrical performance to thermally grown SiO{sub 2} substrates for MoS{sub 2} FETs, offering an attractive passivating substrate for transition-metal dichalcogenides (TMD) with a smooth surface morphology. Single-crystal MoS{sub 2} grains are grown via vapor transport process using solid precursors directly on low pressure CVD Si{sub 3}N{sub 4}, eliminating the need for transfer processes which degrade electrical performance. Monolayer top-gated MoS{sub 2} FETs with Al{sub 2}O{sub 3} gate dielectric on Si{sub 3}N{sub 4} achieve a room temperature mobility of 24 cm{sup 2}/V s with I{sub on}/I{sub off} current ratios exceeding 10{sup 7}. Using HfO{sub 2} as a gate dielectric, monolayer top-gated CVD MoS{sub 2} FETs on Si{sub 3}N{sub 4} achieve current densities of 55 μA/μm and a transconductance of 6.12 μS/μm at V{sub tg} of −5 V and V{sub ds} of 2 V. We observe an increase in mobility at lower temperatures, indicating phonon scattering may dominate over charged impurity scattering in our devices. Our results show that Si{sub 3}N{sub 4} is an attractive alternative to thermally grown SiO{sub 2} substrate for TMD FETs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanocrystalline CuInSSe thin films by chemical bath deposition technique

Crystalline CuInSSe thin films have been deposited on glass substrate by chemical bath deposition technique. The CuCl{sub 2}, InCl{sub 3}, thiourea and SeO{sub 2} were used as source materials for the Cu{sup 2+}, In{sup 3+}, S{sup 2−} and Se{sup 2−} ions and the Cu/In ratio was kept at 1.0. EDC was used as a complexing agent. The XRD, Scanning Electron Microscope (SEM), Energy Dispersive Analysis of X-Ray (EDAX) and Optical transmission studies were used for structural analysis, surface morphology, elemental analysis and optical band gap, of the grown thin films respectively. The deposition parameters such as pH, deposition temperature and deposition time were optimized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tuning Superhydrophilic Nanostructured Surfaces to Maximize Water Droplet Evaporation Heat Transfer Performance

Spraying water droplets on air fin surfaces is often used to augment the performance of air-cooled Rankine power plant condensers and wet cooling tower heat exchangers for building air-conditioning systems. To get the best performance in such processes, the water droplets delivered to the surface should spread rapidly into an extensive, thin film and evaporate with no liquid leaving the surface due to recoil or splashing. This paper presents predictions of theoretical/computational modeling and results of experimental studies of droplet spreading on thin-layer, nanostructured, superhydrophilic surfaces that exhibit very high wicking rates (wickability) in the porous layer. Analysis of the experimental data in the model framework illuminates the key aspects of the physics of the droplet-spreading process and evaporation heat transfer. This analysis also predicts the dependence of droplet-spreading characteristics on the nanoporous surface morphology and other system parameters. The combined results of this investigation indicate specific key strategies for design and fabrication of surface coatings that will maximize the heat transfer performance for droplet evaporation on heat exchanger surfaces. The implications regarding wickability effects on pool boiling processes are also discussed.

Engineering↗

Strained-Induced Morphological Reconstruction of RuO 2 (110) Thin-Film Electrocatalysts

Strain is a widely used strategy for electrocatalyst engineering. Overstraining, however, can lead to unintentional materials transformation. We investigate the impact of strain on the surface morphology of a rutile RuO 2 (110) film grown on a symmetry-matching rutile TiO 2 (110) substrate. When the film thickness exceeds 9 nm, the RuO 2 surface relaxes by forming step edges that expose the {011} plane. Density functional theory (DFT) calculation shows that the (011) facet is among the lower energy surfaces of rutile RuO 2 , suggesting that this formation incurs minimal energetic penalties. In situ atomic force microscopy (AFM) shows that the film maintains the (110) structure of the terrace during electrochemistry. Inductively coupled plasma–mass spectrometry (ICP-MS) further reveals the insensitivity of the Ru dissolution to strain. Here, our findings show a strain-relieving pathway via surface reconstruction in RuO 2 (110) and provide an example of a strain-relieving mechanism that does not affect dissolution.

Evolution reactions↗

Low-temperature atomic layer deposition of Al{sub 2}O{sub 3} on blown polyethylene films with plasma-treated surfaces

In this study, a layer of Al{sub 2}O{sub 3} was deposited on blown polyethylene films by atomic layer deposition (ALD) at low temperatures, and the surface characteristics of these Al{sub 2}O{sub 3}-coated blown polyethylene films were analyzed. In order to examine the effects of the plasma treatment of the surfaces of the blown polyethylene films on the properties of the films, both untreated and plasma-treated film samples were prepared under various processing conditions. The surface characteristics of the samples were determined by x-ray photoelectron spectroscopy, as well as by measuring their surface contact angles. It was confirmed that the surfaces of the plasma-treated samples contained a hydroxyl group, which helped the precursor and the polyethylene substrate to bind. ALD of Al{sub 2}O{sub 3} was performed through sequential exposures to trimethylaluminum and H{sub 2}O at 60 Degree-Sign C. The surface morphologies of the Al{sub 2}O{sub 3}-coated blown polyethylene films were observed using atomic force microscopy and scanning electron microscopy/energy-dispersive x-ray spectroscopy. Further, it was confirmed that after ALD, the surface of the plasma-treated film was covered with alumina grains more uniformly than was the case for the surface of the untreated polymer film. It was also confirmed via the focused ion beam technique that the layer Al{sub 2}O{sub 3} conformed to the surface of the blown polyethylene film.

36 MATERIALS SCIENCE↗

Structure, Morphology, and Mechanical Properties of AlCrN Coatings Deposited by Cathodic Arc Evaporation

AlCrN coatings were deposited on steel substrates (HS6-5-2) using cathodic arc evaporation. The effect of nitrogen pressure on the properties of CrAlN coatings formed from Al{sub 80}Cr{sub 20} cathode, such as chemical and phase composition of the coatings, surface morphology, deposition rate, hardness and adhesion to the substrate, and friction and wear were investigated. The coating deposited at nitrogen pressure of 3 Pa shows the highest deposition rate. The roughness parameter Ra of the coating surface decreases with increasing nitrogen pressure during its formation. The test results showed that the AlCrN coatings deposited under nitrogen pressure in the range from 1 to 5 Pa show similar hardness for all the coatings, which is around 17 GPa. The increase in the negative bias voltage of the substrate during the formation of the coating deteriorates its adhesion to the substrate, although the wear rate is rather good, about 1.4 × 10{sup −7} mm{sup 3}/Nm. The coatings deposited at nitrogen pressure of 3-4 Pa are characterized by the highest critical load, 95 N. Despite worse adhesion, these coatings are characterized by high resistance to wear, the wear rate is about 1.4 × 10{sup −7} mm{sup 3}/Nm.

36 MATERIALS SCIENCE↗

Studying Near-Surface Layers of Germanium Implanted with Cobalt Ions

Results of an investigation of the surface of germanium nanostructured by means of ion implantation are presented. Single-crystalline germanium (c-Ge) plates were irradiated by 40-keV cobalt Co{sup +} ions in a dose range of (2–8) × 10{sup 16} ion/cm{sup 2}. Evolution of the germanium surface morphology with increasing ion dose was studied by method of scanning electron microscopy. It is established that an increase in the ion implantation dose is accompanied by gradual formation of a surface layer consisting of spherical particles with diameters of ~150 nm. Analysis of the X-ray diffraction patterns of samples was indicative of the appearance of nanosized cobalt germanide (CoGe) particles in the ion-implanted surface layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Water-assisted pulsed Er:YAG laser interaction with silicon

Silicon is virtually transparent to the Er:YAG laser with a wavelength of 2.94 μm. In this study, we report that moderately doped silicon (1–10 Ω cm) can be processed by a pulsed Er:YAG laser with a pulse duration of 350 μs and a peak laser intensity of 1.7 × 10{sup 5} W/cm{sup 2} by applying a thin water layer on top of silicon as a light absorbing medium. In this way, water is heated first by strongly absorbing the laser energy and then heats up the silicon wafer indirectly. As the silicon temperature rises, the free carrier concentration and therefore the absorption coefficient of silicon will increase significantly, which may enable the silicon to get directly processed by the Er:YAG laser when the water is vaporized completely. We also believe that the change in surface morphology after melting could contribute to the increase in the laser beam absorptance. It was observed that 525 nm-thick p-type wafer specimens were fully penetrated after 15 laser pulses were irradiated. Bright yellow flames were observed during the process, which indicates that the silicon surface reached the melting point.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Concurrent Amorphization and Nanocatalyst Formation in Cu‐Substituted Perovskite Oxide Surface: Effects on Oxygen Reduction Reaction at Elevated Temperatures

Abstract The activity and durability of chemical/electrochemical catalysts are significantly influenced by their surface environments, highlighting the importance of thoroughly examining the catalyst surface. Here, Cu‐substituted La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3‐δ is selected, a state‐of‐the‐art material for oxygen reduction reaction (ORR), to explore the real‐time evolution of surface morphology and chemistry under a reducing atmosphere at elevated temperatures. Remarkably, in a pioneering observation, it is discovered that the perovskite surface starts to amorphize at an unusually low temperature of approximately 100 °C and multicomponent metal nanocatalysts additionally form on the amorphous surface as the temperature raises to 400 °C. Moreover, this investigation into the stability of the resulting amorphous layer under oxidizing conditions reveals that the amorphous structure can withstand a high‐temperature oxidizing atmosphere (≥650 °C) only when it has undergone sufficient reduction for an extended period. Therefore, the coexistence of the active nanocatalysts and defective amorphous surface leads to a nearly 100% enhancement in the electrode resistance for the ORR over 200 h without significant degradation. These observations provide a new catalytic design strategy for using redox‐dynamic perovskite oxide host materials.

Jeon, SungHyun↗

Synthesis and electrochemical characterizations of nano-La{sub 2}O{sub 3}-coated nanostructure LiMn{sub 2}O{sub 4} cathode materials for rechargeable lithium batteries

LiMn{sub 2}O{sub 4} spinel cathode materials were coated with 1.0, 2.0 and 3.0 wt.% of La{sub 2}O{sub 3} by polymeric process, followed by calcinations at 850 {sup o}C for 6 h in air. The surface coated LiMn{sub 2}O{sub 4} cathode materials were physically characterized using X-ray diffraction, scanning electron microscopy, transmission electron microscopy and XPS. XRD patterns of La{sub 2}O{sub 3}-coated LiMn{sub 2}O{sub 4} revealed that the coating did not affect the crystal structure and space group Fd3m of the cathode materials, compared to the uncoated LiMn{sub 2}O{sub 4}. The surface morphology and particle agglomeration were investigated using scanning electron microscopy and the TEM image showed a compact coating layer on the surface of the core materials that had average thickness of about 100 nm. XPS data illustrated that the La{sub 2}O{sub 3} was completely coated over the surface of the LiMn{sub 2}O{sub 4} core cathode materials. The galvanostatic charge and discharge of the uncoated and La{sub 2}O{sub 3}-coated LiMn{sub 2}O{sub 4} cathode materials were carried out in the potential range of 3.0 and 4.5 V at 30 {sup o}C and 60 {sup o}C. Among them, 2.0 wt.% of La{sub 2}O{sub 3}-coated spinel LiMn{sub 2}O{sub 4} cathode has improved the structural stability, high reversible capacity and excellent electrochemical performances of the rechargeable lithium batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoconductivity in reactively evaporated copper indium selenide thin films

Copper indium selenide thin films of composition CuInSe{sub 2} with thickness of the order of 130 nm are deposited on glass substrate at a temperature of 423 ±5 K and pressure of 10{sup −5} mbar using reactive evaporation, a variant of Gunther's three temperature method with high purity Copper (99.999%), Indium (99.999%) and Selenium (99.99%) as the elemental starting materials. X-ray diffraction (XRD) studies shows that the films are polycrystalline in nature having preferred orientation of grains along the (112) plane. The structural type of the film is found to be tetragonal with particle size of the order of 32 nm. The structural parameters such as lattice constant, particle size, dislocation density, number of crystallites per unit area and strain in the film are also evaluated. The surface morphology of CuInSe{sub 2} films are studied using 2D and 3D atomic force microscopy to estimate the grain size and surface roughness respectively. Analysis of the absorption spectrum of the film recorded using UV-Vis-NIR Spectrophotometer in the wavelength range from 2500 nm to cutoff revealed that the film possess a direct allowed transition with a band gap of 1.05 eV and a high value of absorption coefficient (α) of 10{sup 6} cm{sup −1} at 570 nm. Photoconductivity at room temperature is measured after illuminating the film with an FSH lamp (82 V, 300 W). Optical absorption studies in conjunction with the good photoconductivity of the prepared p-type CuInSe{sub 2} thin films indicate its suitability in photovoltaic applications.

36 MATERIALS SCIENCE↗

The role of surface diffusion and wing tilt in the formation of localized stacking faults in high In-content InGaN MQW nanostructures

Yellow and green emitting multiple quantum well structures are grown on nanostripe templates with {10-11} facets. SEM and cathodoluminescence measurements show a correlation between rough surface morphology near the bottom of the stripes and non-radiative recombination centers. Transmission electron microscopy (TEM) analysis shows that these surface instabilities are a result of stacking faults generated from the quantum well (QW) regions near the bottom of the pyramid that propagate to the surface. HRTEM images show that the stacking faults are I{sub 1} type which is formed by removal of one half basal plane to relieve the compressive strain in the InGaN QW. Thicker QWs near the bottom as a result of growth rate enhancement due to the surface diffusion of the precursors from the mask regions cause increased strain. Additionally, the compressive strain induced by the bending of the nanostructure towards the growth mask further increases the strain experienced by the QW thereby causing the localized defect generation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Oxygen Chemistry on Transition Metals: First-principles DFT and Monte Carlo Studies

Electro-chemical and thermo-chemical processes occurring at multi-phase interfaces are the basis of many devices facilitating conversion between forms of energy including solar, electrical, and chemical in a number of devices from fuel cells to batteries. Large electric fields, high potential bias and inherent inaccessibility of these interfaces to many conventional experimental probes contribute to an absence of fundamental insight into mechanistic behavior of chemical species and interfacial environment. Modern first-principles tools including Density Functional Theory (DFT) can be used to study these interfaces from a first-principles approach and provide insight for molecular transformations. In our studies we also coarse-grain DFT calculations with the Cluster Expansion (CE) and extend quantum-mechanical ab-initio information to larger systems and include environmental factors such as temperature, partial pressure of oxygen, and surface morphology (undercoordinated step and edge sites). We investigate two case studies: recharge cycle of lithium/oxygen batteries and oxygen on a metal surface in ethylene epoxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Topographic Characterization of Niobium Films on Copper for SRF Applications

Niobium films on copper substrates are being actively developed as a low-cost alternative to bulk niobium for superconducting radio-frequency (SRF) cavities, offering superior thermal conductivity, reduced material cost, and the potential for scalable cavity fabrication. The performance of such films can be limited by imperfect surfaces that reduce the peak achievable magnetic field. Nb films deposited under varied electron cyclotron resonance conditions were characterized via atomic force microscopy. The films exhibit a corrugated surface morphology which can be characterized by the depth of the corrugation, slope angle, and standard roughness parameters. The influence of this surface roughness on field limitations is examined within the framework of London theory. These measurements and models aid in understanding how ECR deposition conditions influence the nanometer-scale roughness of Nb films on Cu and its impact on high-field SRF cavity performance.

Redman, Brandi [Old Dominion Univ., Norfolk, VA (U↗

Investigation of Contact Properties and Device Performance for Bifacial Double-Side Textured Silicon Solar Cells With Polysilicon Based Passivating Contacts

We investigate the impact of the surface morphology on the contact properties of phosphorus doped poly-Si layers. If the poly-Si layer on a textured surface remains intact after high-temperature metallization using a fire-through (FT) silver (Ag) paste, the J0,metal is not expected to increase significantly while the specific contact resistivity can improve with a textured surface. The contact properties of the FT Ag contacts to n+ poly-Si deposited on both textured and planar surfaces are investigated by measuring and evaluating ρc and J0,metal. The reasons for differences in contact resistance and recombination are further investigated with SEM imaging. Solar cells with n-type polysilicon based passivating contacts on the rear side are fabricated and characterized. The scientific approach used, and the insights presented in this work, help to understand the mechanisms and behavior of screen-printed and fired-through contacts to polysilicon layers deposited onto textured silicon surfaces.

Padhamnath, Pradeep (ORCID:0000000202510624)↗