Search NASA⌕ Search

SEARCH · Search NASA

Results for “threshold based”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Ionospheric power beam studies

A power density level of 23 mW/sq cm is presented as a design specification based on theoretical calculations of a threshold for microwave ionosphere nonlinear interaction (thermal runaway). For comparable power densities, enhanced electron heating is observed to change the electron temperature by a factor of two or three, but not by an order of magnitude.

Duncan, L. M.↗

Geometry and starvation effects in hydrodynamic lubrication

Numerical methods were used to determine the effects of lubricant starvation on the minimum film thickness under conditions of a hydrodynamic point contact. Starvation was effected by varying the fluid inlet level. The Reynolds boundary conditions were applied at the cavitation boundary and zero pressure was stipulated at the meniscus or inlet boundary. A minimum-film-thickness equation as a function of both the ratio of dimensionless load to dimensionless speed and inlet supply level was determined. By comparing the film generated under the starved inlet condition with the film generated from the fully flooded inlet, an expression for the film reduction factor was obtained. Based on this factor a starvation threshold was defined as well as a critically starved inlet. The changes in the inlet pressure buildup due to changing the available lubricant supply are presented in the form of three dimensional isometric plots and also in the form of contour plots.

Brewe, D. E.↗

Geometry and starvation effects in hydrodynamic lubrication

Numerical methods were used to detemine the effects of lubricant starvation on the minimum film thickness under conditions of a hydrodynamic point contact. Starvation was effected by varying the fluid inlet level. The Reynolds boundary conditions were applied at the cavitation boundary and zero pressure was stipulated at the meniscus or inlet boundary. A minimum film thickness equation as a function of both the ratio of dimensionless load to dimensionless speed and inlet supply level was determined. By comparing the film generated under the starved inlet condition with the film generated from the fully flooded inlet, an expression for the film reduction factor was obtained. Based on this factor a starvation threshold was defined as well as a critically starved inlet. The changes in the inlet pressure buildup due to changing the available lubricant supply are presented in the form of three dimensional isometric plots and also in the form of contour plots.

Brewe, D.↗

Ageing airplane repair assessment program for Airbus A300

Summary as a result of a commitment between the FAA and ATA the Airworthiness Assurance Task Force (AATF) steering committee requested the transport aircraft manufacturers to develop a program to assess the repairs on in-service aircraft since recent Supplemental Structural Inspection Programs (SSIP) had not been addressed to assessing repairs. The intent of the assessment program is to remove all existing ambiguities and to achieve a sufficient level of safety across the fleet by applying actual fatigue and damage tolerance criteria defined by FAR 25.571 to repaired structures. A general three stage program has been developed with major aircraft manufacturers and airlines cooperation including area/component classification, repair categorization and inspection/removal requirement establishment which is the basis for model specific repair assessment programs. This paper describes the current status of the repair categorization activities and includes all details about the methodologies developed for determination of the inspection program for the skin on pressurized fuselages. For inspection threshold determination two methods are defined based on fatigue life approach, i.e. a simplified and a detailed method. The detailed method considers 15 different parameters to assess the influences of material, geometry, size, location, aircraft usage and workmanship on the fatigue life of the repair and the original structure. For definition of the inspection intervals a general method is developed which applies to all concerned repairs. For this the initial flaw concept is used by considering 6 parameters and the detectable flaw sizes depending on proposed nondestructive inspection methods. An alternative method is provided for small repairs allowing visual inspection with shorter intervals.

Aging Aircraft↗

Convective effects during the physical vapor transport process. I - Thermal convection

The effects of convection on diffusive-convective physical vapor transport process are examined computationally. We analyze conditions ranging from typical laboratory conditions to conditions achievable only in a low gravity environment. This corresponds to thermal Rayleigh numbers Ra(T) ranging from 1.80 to 1.92 x 10 exp 6. Our results indicate that the effect of the sublimation and condensation fluxes at the boundaries is 10 increase the threshold of instability. For typical ground based conditions time dependent oscillatory convection can occur. This results in nonuniform temperature and concentration gradients at the crystal interface. Spectral analysis of the flow field shows regions of both periodic and quasi-periodic states. Low gravity conditions can effectively reduce convective effects, thus resulting in uniform temperature and concentration gradients at the interface, a desirable condition for crystal growth.

Duval, Walter M. B.↗

Convection in the Physical Vapor Transport Process: Thermal - 1

The effects of convection on diffusive-convective physical vapor transport process are examined computationally. We analyze conditions ranging from typical laboratory conditions to conditions achievable only in a low gravity environment. This corresponds to thermal Rayleigh numbers Ra(sub tau) ranging from 1.80 x 10 to 1.92 x 10(exp 6). Our results indicate that the effect of the sublimation and condensation fluxes at the boundaries is to increase the threshold of instability. For typical ground based conditions, time dependent oscillatory convection can occur. This results in unsteady transport, and non-uniform temperature and concentration gradients at the crystal interface. Spectral analysis of the flow field shows parametric regions exhibiting both an oscillatory approach to steady state and a chaotic transient to a periodic state. Low gravity conditions stabilize the flow field. Convective effects are effectively reduced, thus resulting in uniform temperature and concentration gradients at the interface, a desirable condition for crystal growth.

Duval, Walter M. B.↗

Convection in the Physical Vapor Transport Process-I: Thermal

The effects of convection on diffusive-convective physical vapor transport process are examined computationally. We analyze conditions ranging from typical laboratory conditions to conditions achievable only in a low gravity environment. This corresponds to thermal Rayleigh numbers Ra, ranging from 1.80 x 10 to 1.92 x 10(exp 6). Our results indicate that the effect of the sublimation and condensation fluxes at the boundaries is to increase the threshold of instability. For typical ground based conditions, time dependent oscillatory convection can occur. This results in unsteady transport, and non- uniform temperature and concentration gradients at the crystal interface. Spectral analysis of the flow field shows parametric regions exhibiting both an oscillatory approach to steady state and a chaotic transient to a periodic state. Low gravity conditions stabilize the flow field. Convective effects are effectively reduced, thus resulting in uniform temperature and concentration gradients at the interface, a desirable condition for crystal growth.

Duval, Walter M. B.↗

ESTIMATING THE BENEFIT OF TRMM TROPICAL CYCLONE DATA IN SAVING LIVES

The Tropical Rainfall Measuring Mission (TRMM) is a joint NASA/JAXA research mission launched in late 1997 to improve our knowledge of tropical rainfall processes and climatology (Kummerow et ai., 2000; Adler et ai., 2003). In addition to being a highly successful research mission, its data are available in real time and operational weather agencies in the U.S. and internationally are using TRMM data and images to monitor and forecast hazardous weather (tropical cyclones, floods, etc.). For example, in 2004 TRMM data were used 669 times for determining tropical cyclone location fixes (National Research Council, 2004). TRMM flies at a relatively low altitude, 400 km, and requires orbit adjustment maneuvers to maintain altitude against the small drag of the atmosphere. There is enough fuel used for these maneuvers remaining on TRMM for the satellite to continue flying until 2011-12. However, most of the remaining fuel may be used to perform a controlled re-entry of the satellite into the Pacific Ocean. The fuel threshold for this operation will be reached in the summer of 2005, although the maneuver would actually occur in late 2006 or 2007. The full science mission would end in 2005 under the controlled re-entry option. This re-entry option is related to the estimated probability of injury (1/5,000) that might occur during an uncontrolled re-entry of the satellite. If the estimated probability of injury exceeds 1/10,000 a satellite is a candidate for a possible controlled re-entry. In the TRMM case the NASA Safety Office examined the related issues and concluded that, although TRMM exceeded the formal threshold, the use of TRMM data in the monitoring and forecasting of hazardous weather gave a public safety benefit that compensated for TRMM slightly exceeding the orbital debris threshold (Martin, 2002). This conclusion was based in part on results of an independent panel during a workshop on benefits of TRMM data in concluded that the benefit of TRMM data in saving lives through its use in operational forecasting could not be quantified. The objective of this paper is to describe a possible technique to estimate the number of lives saved per year and apply it to the TRMM case and the use of its data in monitoring and forecasting tropical cyclones.

Adler, Robert F.↗

Wire Crimp Termination Verification Using Ultrasonic Inspection

The development of a new ultrasonic measurement technique to quantitatively assess wire crimp terminations is discussed. The amplitude change of a compressional ultrasonic wave propagating through the junction of a crimp termination and wire is shown to correlate with the results of a destructive pull test, which is a standard for assessing crimp wire junction quality. Various crimp junction pathologies such as undercrimping, missing wire strands, incomplete wire insertion, partial insulation removal, and incorrect wire gauge are ultrasonically tested, and their results are correlated with pull tests. Results show that the nondestructive ultrasonic measurement technique consistently (as evidenced with destructive testing) predicts good crimps when ultrasonic transmission is above a certain threshold amplitude level. A physics-based model, solved by finite element analysis, describes the compressional ultrasonic wave propagation through the junction during the crimping process. This model is in agreement within 6% of the ultrasonic measurements. A prototype instrument for applying this technique while wire crimps are installed is also presented. The instrument is based on a two-jaw type crimp tool suitable for butt-splice type connections. Finally, an approach for application to multipin indenter type crimps will be discussed.

Perey, Daniel F.↗

Wire Crimp Connectors Verification using Ultrasonic Inspection

The development of a new ultrasonic measurement technique to quantitatively assess wire crimp connections is discussed. The amplitude change of a compressional ultrasonic wave propagating through the junction of a crimp connector and wire is shown to correlate with the results of a destructive pull test, which previously has been used to assess crimp wire junction quality. Various crimp junction pathologies (missing wire strands, incorrect wire gauge, incomplete wire insertion in connector) are ultrasonically tested, and their results are correlated with pull tests. Results show that the ultrasonic measurement technique consistently (as evidenced with pull-testing data) predicts good crimps when ultrasonic transmission is above a certain threshold amplitude level. A physics-based model, solved by finite element analysis, describes the compressional ultrasonic wave propagation through the junction during the crimping process. This model is in agreement within 6% of the ultrasonic measurements. A prototype instrument for applying the technique while wire crimps are installed is also presented.

Cramer, K. Elliott↗

Bridging Empirical and Physical Approaches for Landslide Monitoring and Early Warning

Rainfall-triggered landslides typically occur and are evaluated at local scales, using slope-stability models to calculate coincident changes in driving and resisting forces at the hillslope level in order to anticipate slope failures. Over larger areas, detailed high resolution landslide modeling is often infeasible due to difficulties in quantifying the complex interaction between rainfall infiltration and surface materials as well as the dearth of available in situ soil and rainfall estimates and accurate landslide validation data. This presentation will discuss how satellite precipitation and surface information can be applied within a landslide hazard assessment framework to improve landslide monitoring and early warning by considering two disparate approaches to landslide hazard assessment: an empirical landslide forecasting algorithm and a physical slope-stability model. The goal of this research is to advance near real-time landslide hazard assessment and early warning at larger spatial scales. This is done by employing high resolution surface and precipitation information within a probabilistic framework to provide more physically-based grounding to empirical landslide triggering thresholds. The empirical landslide forecasting tool, running in near real-time at http://trmm.nasa.gov, considers potential landslide activity at the global scale and relies on Tropical Rainfall Measuring Mission (TRMM) precipitation data and surface products to provide a near real-time picture of where landslides may be triggered. The physical approach considers how rainfall infiltration on a hillslope affects the in situ hydro-mechanical processes that may lead to slope failure. Evaluation of these empirical and physical approaches are performed within the Land Information System (LIS), a high performance land surface model processing and data assimilation system developed within the Hydrological Sciences Branch at NASA's Goddard Space Flight Center. LIS provides the capabilities to quantify uncertainty from model inputs and calculate probabilistic estimates for slope failures. Results indicate that remote sensing data can provide many of the spatiotemporal requirements for accurate landslide monitoring and early warning; however, higher resolution precipitation inputs will help to better identify small-scale precipitation forcings that contribute to significant landslide triggering. Future missions, such as the Global Precipitation Measurement (GPM) mission will provide more frequent and extensive estimates of precipitation at the global scale, which will serve as key inputs to significantly advance the accuracy of landslide hazard assessment, particularly over larger spatial scales.

Kirschbaum, Dalia↗

Future Climate Change Impact on Wildfire Danger Over the Mediterranean: the Case of Greece

Recent studies have shown that temperature and precipitation in the Mediterranean are expected to change, contributing to longer and more intense summer droughts that even extend out of season. In connection to this, the frequency of forest fire occurrence and intensity will likely increase. In the present study, the changes in future fire danger conditions are assessed for the different regions of Greece using the Canadian fire weather index (FWI). Gridded future climate output as estimated from three regional climate models from the Coordinated Regional Downscaling Experiment are utilized. We use three representative concentration pathways (RCPs) consisting of an optimistic emissions scenario where emissions peak and decline beyond 2020 (RCP2.6), a middle-of-the-road scenario (RCP4.5) and a pessimistic scenario, in terms of mitigation where emissions continue to rise throughout the century (RCP8.5). Based on established critical fire FWI threshold values for Greece, the future change in days with critical fire danger were calculated for different areas of Greece domains. The results show that fire danger is expected to progressively increase in the future especially in the high-end climate change scenario with southern and eastern regions of Greece expected to have up to 40 additional days of high fire danger relative to the late 20th century, on average. Crete, the Aegean Islands, the Attica region, as well as parts of Peloponnese are predicted to experience a stronger increase in fire danger.

Forest fires↗

Improving Cyber-Security of Smart Grid Systems via Anomaly Detection and Linguistic Domain Knowledge

The planned large scale deployment of smart grid network devices will generate a large amount of information exchanged over various types of communication networks. The implementation of these critical systems will require appropriate cyber-security measures. A network anomaly detection solution is considered in this work. In common network architectures multiple communications streams are simultaneously present, making it difficult to build an anomaly detection solution for the entire system. In addition, common anomaly detection algorithms require specification of a sensitivity threshold, which inevitably leads to a tradeoff between false positives and false negatives rates. In order to alleviate these issues, this paper proposes a novel anomaly detection architecture. The designed system applies the previously developed network security cyber-sensor method to individual selected communication streams allowing for learning accurate normal network behavior models. Furthermore, the developed system dynamically adjusts the sensitivity threshold of each anomaly detection algorithm based on domain knowledge about the specific network system. It is proposed to model this domain knowledge using Interval Type-2 Fuzzy Logic rules, which linguistically describe the relationship between various features of the network communication and the possibility of a cyber attack. The proposed method was tested on experimental smart grid system demonstrating enhanced cyber-security.

97 MATHEMATICS AND COMPUTING↗

Application of Low Dose Radiation Adaptive Response to Control Aging-Related Disease

Oxidative damage has been implicated in the pathogenesis of most aging-related diseases including neurodegenerative diseases. Antioxidant supplementation has been found to be ineffective in reducing such diseases, but increased endogenous production of antioxidants from the adaptive response due to physical and cognitive exercises (which increase oxidative metabolism and oxidative stress) has been effective in reducing some of the diseases. Low dose radiation (LDR), which increases oxidative stress and results in adaptive response of increased antioxidants, may provide an alternative method of controlling the aging-related diseases. We have studied the effect of LDR on the induction of adaptive response in rat brains and the effectiveness of the LDR in reducing the oxidative damage caused by subsequent high dose radiation. We have also investigated the effect of LDR on apomorphine-induced rotations in the 6-hydroxydopamine (6-OHDA) unilaterally-lesioned rat model of Parkinson's disease (PD). LDR was observed to initiate an adaptive response in the brain, and reduce the oxidative damage from subsequent high dose radiation exposure, confirming the effectiveness of LDR adaptive response in reducing the oxidative damage from the free radicals due to high dose radiation. LDR resulted in a slight improvement in Tyrosine hydroxylase expression on the lesioned side of substantia nigra (indicative of its protective effect on the dopaminergic neurons), and reduced the behavioral symptoms in the 6-OHDA rat model of PD. Translation of this concept to humans, if found to be applicable, may be a possible approach for controlling the progression of PD and other neurodegenerative diseases. Since any translation of the concept to humans would be hindered by the currently prevalent carcinogenic concerns regarding LDR based on the linear no-threshold (LNT) model, we have also studied the justifications for the use of the LNT model. One of the shortcomings of the LNT model is that it ignores the effects of any adaptive response of the body to the LDR. The importance of considering adaptive response becomes obvious when one considers the sharp contrast between (i) the failure of well-designed anti-angiogenesis therapies which resulted in aggressive tumors because of ignoring adaptive response and (ii) the occasional cure of untreated metastatic lesions likely due to the incidental adaptive response from the LDR exposure to parts of the body during radiation therapy of a primary tumor, known as the abscopal effect. Another shortcoming of the LNT model is that it pays exclusive attention to increase in mutations, which is not a decisive factor in the occurrence of clinical cancers, as the cause of excess cancers. On the other hand, LNT model ignores the immune system response, which plays a very important role in preventing occult cancers from becoming clinical cancers, as demonstrated by the large increase in cancers in organ transplant patients whose immune system is suppressed. There is also recent epidemiological evidence against the LNT model. A re-analysis of the latest update to the atomic bomb survivor data has shown that the data no longer support the LNT model but are consistent with the radiation hormesis hypothesis. A re-analysis of cancer incidence data of Taiwanese apartment dwellers that were exposed to LDR from contaminated building materials has also shown a reduction in cancers from the LDR. The present LDR carcinogenic concerns would preclude any human study of cancer prevention using LDR, since the study would require subjecting a large asymptomatic population to LDR. However, pilot studies of radiation hormesis in cancer patients may be more acceptable since these would require irradiation of limited numbers of patients in order to assess the effectiveness of the LDR treatments. Some of the LDR applications that may be considered for cancer patients are: LDR treatment of early stage cancers without the adverse side effects of current treatments such as radiation therapy or chemotherapy, adjuvant LDR treatment of cancer patients undergoing radiation therapy for better tumor control and reduced metastasis, and the use of LDR treatment following radiation therapy to reduce the risk of second cancers from the radiation therapy. Studies of LDR for the control of early-stage neurodegenerative diseases may also be more acceptable since currently there are no effective treatments available for controlling these diseases, and since such studies would require LDR exposure to limited parts of the brain, and the carcinogenic risk from such treatments would be very small due to the low radiation tissue-weighting factor for the brain. Success in these studies can lead to the study of LDR for preventing and controlling other aging-related diseases.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

Data center cooling system

A data center cooling system may include heat transfer equipment to cool a liquid coolant without vapor compression refrigeration, and the liquid coolant is used on a liquid cooled information technology equipment rack housed in the data center. The system may also include a controller-apparatus to regulate the liquid coolant flow to the liquid cooled information technology equipment rack through a range of liquid coolant flow values based upon information technology equipment temperature thresholds.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Data center cooling method

A method aspect for removing heat from a data center may use liquid coolant cooled without vapor compression refrigeration on a liquid cooled information technology equipment rack. The method may also include regulating liquid coolant flow to the data center through a range of liquid coolant flow values with a controller-apparatus based upon information technology equipment temperature threshold of the data center.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Assessing Edge Localized Mode (ELM) Mitigation by Pellet Triggering in Smallest-Possible Affordable Robust Compact (SPARC) Low-Collisionality Discharges

Simulations of pellet edge-localized mode (ELM) triggering with the M3D-C1 code confirmed experimentally observed pellet mass thresholds in low-collisionality DIII-D discharges and predicted extremely large thresholds in ITER [A. Wingen et al, Nucl. Fusion 64, 066015(2024)]. The linear (static) and nonlinear (dynamic) workflows developed in this previous work are now applied to the SPARC tokamak. Multiple synthetic equilibria for the high-performance H-mode scenario are tested for MHD stability without pellets using the linear workflow and ELITE simulations; a stable one is identified. Pellets of various mass are injected along an inboard, near-midplane trajectory in the M3D-C1 simulation. No pellet mass threshold for ELM triggering can be found for realistic pellet masses, concluding that fueling from this injection location would not trigger ELMs. A poloidal scan of possible injection locations shows very high thresholds on the high-field side and reasonable thresholds on the low-field-side (LFS). Based on results of this work the location for a LFS injection was finalized in the SPARC design. For this LFS injection the pellet mass threshold is determined using the linear workflow, aligning well with the poloidal scan.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Assessing Edge Localized Mode (ELM) Mitigation by Pellet Triggering in Smallest-Possible Affordable Robust Compact (SPARC) Low-Collisionality Discharges

Simulations of pellet edge-localized mode (ELM) triggering with the M3D-C1 code confirmed experimentally observed pellet mass thresholds in low-collisionality DIII-D discharges and predicted extremely large thresholds in ITER. The linear (static) and nonlinear (dynamic) workflows developed in this previous work are now applied to the SPARC tokamak. Multiple synthetic equilibria for the high-performance H-mode scenario are tested for MHD stability without pellets using the linear workflow and ELITE simulations; a stable one is identified. Pellets of various mass are injected along an inboard, near-midplane trajectory in the M3D-C1 simulation. No pellet mass threshold for ELM triggering can be found for realistic pellet masses, concluding that fueling from this injection location would not trigger ELMs. A poloidal scan of possible injection locations shows very high thresholds on the high-field side and reasonable thresholds on the low-field-side (LFS). Based on results of this work the location for a LFS injection was finalized in the SPARC design. For this LFS injection the pellet mass threshold is determined using the linear workflow, aligning well with the poloidal scan.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗