Search NASA⌕ Search

SEARCH · Search NASA

Results for “ATMOSPHERIC CORRECTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Equivalence of airborne and ground-acquired wheat canopy temperatures

The relationship between airborne and ground-based measurements of soil and crop canopy temperatures is investigated for a partial crop canopy. Daily ground-based measurements using a wide-field-of-view radiometer oriented towards the nadir at a height of 1.5 m and airborne thermal imagery at two-week intervals were obtained throughout the entire growing season of a stand of wheat. When corrected for atmospheric effects, the airborne measurements were found to be virtually identical to ground-based measurements, with a regression line slope of 0.985, a standard deviation of 1.8 C and a correlation coefficient of 0.97.

Millard, J. P.↗
NASA NTRS1980

HCMM energy budget data as a model input for assessing regions of high potential groundwater pollution

The author has identified the following significant results. Day thermal data were analyzed to assess depth to groundwater in the test site. HCMM apparent temperature was corrected for atmospheric effects using lake temperature of the Oahe Reservoir in central South Dakota. Soil surface temperatures were estimated using an equation developed for ground studies. A significant relationship was found between surface soil temperature and depth to groundwater, as well as between the surface soil-maximum air temperature differential and soil water content (% of field capacity) in the 0 cm and 4 cm layer of the profile. Land use for the data points consisted of row crops, small grains, stubble, and pasture.

Moore, D. G.↗
NASA NTRS1979

Comparison of stack plume properties obtained from aircraft and spacecraft measurements

Landsat II imagery data and aircraft nephelometer measurements were analyzed to determine the quantitative properties of a stack plume emitted from a moderate-sized pulpmill. Aircraft measurements were obtained at several heights across the plume at 1.0, 3.0, and 6.5 km downwind from the stack, and for comparative purposes, the Landsat data were also analyzed at these same three locations and at 0.5 and 10.0 km. Overlapping, consecutive-day MSS data provided plume/no-plume radiances upwelling from the stack site. Imagery data from a 10- by 10 km region in the vicinity of the mill were normalized to correct for atmospheric, solar, and viewing angle differences for the 2 observation days, and cloud-shadow data were used to evaluate sky radiance. Particle concentrations, vertical and lateral dispersions, and plume heights determined from both the aircraft and spacecraft measurement techniques are in good agreement.

Staylor, W. F.↗
NASA NTRS1981

Hydrogen production rates from ground-based Fabry-Perot observations of comet Kohoutek

The only ground-based observations of a cometary hydrogen corona that have been obtained up to the present were carried out during the appearance of comet Kohoutek (1973 XII). Hydrogen Balmer alpha (H-alpha) emission from the gas cloud surrounding the comet was detected using a Fabry-Perot spectrometer at Kitt Peak National Observatory. These observations have been reexamined using (1) recently obtained solar full-disk Lyman beta emission line profiles, (2) a new calibration of the absolute sensitivity of the Fabry-Perot spectrometer based on comparison of NGC 7000 with standard stars and the planetary nebula NGC 7662, and (3) corrections for atmospheric extinction instead of the geocoronal H-alpha comparison method used previously to obtain comet H-alpha intensities. The new values for hydrogen production rates are in good agreement with results obtained from Lyman alpha observations of comet Kohoutek.

Scherb, F.↗
NASA NTRS1981

Solar spectrum from 170 to 3200 nanometers

The spectral irradiance of the Sun between 170 and 3200 nanometers was measured to determine accurately the solar constant, its possible variation with the solar cycle, and the wavelength range responsible for the observed variations. It is pointed out that measurements over very long time periods (10 years) involving flights of the same instrument on future Spacelab missions will be required. Few spectral solar irradiation measurements ranging from the near ultraviolet to the near infrared have been performed yet. The most extensive solar irradiation measurements were obtained by a spectrometer onboard an aircraft or from high altitude observatories. The full disk irradiation flux was measured, corrections for atmospheric absorption are applied in all of the measurements.

Thuiller, G.↗
NASA NTRS1982

Solar variability

The variability in the total radiant energy flux, or solar irradiance, is discussed. Direct techniques of measuring irradiance, including ground-based, balloon and rocket-borne, and spacecraft-based measurements are compared; the latter type has led to dramatic advances in accuracy since it eliminates the need for corrections for atmospheric absorption. Correlations of the measured irradiance with solar activity are described. Indirect techniques that monitor other solar parameters such as photospheric conditions or the solar diameter are reviewed, and theoretical studies which attempt to interpret the measurements are discussed. Physical mechanisms which can lead to changes in the solar luminosity are addressed, as is global time-dependent modeling of the response of the sun to structural perturbations. Finally, findings from all techniques are summarized, their weak and strong points are assessed, and suggestions for future research are made.

Sofia, S.↗
NASA NTRS1982

Evaluation of thermal data for geologic applications

Sensitivity studies using thermal models indicated sources of errors in the determination of thermal inertia from HCMM data. Apparent thermal inertia, with only simple atmospheric radiance corrections to the measured surface temperature, would be sufficient for most operational requirements for surface thermal inertia. Thermal data does have additional information about the nature of surface material that is not available in visible and near infrared reflectance data. Color composites of daytime temperature, nighttime temperature, and albedo were often more useful than thermal inertia images alone for discrimination of lithologic boundaries. A modeling study, using the annual heating cycle, indicated the feasibility of looking for geologic features buried under as much as a meter of alluvial material. The spatial resolution of HCMM data is a major limiting factor in the usefulness of the data for geologic applications. Future thermal infrared satellite sensors should provide spatial resolution comparable to that of the LANDSAT data.

Kahle, A. B.↗
NASA NTRS1984

Scanning wind-vector scatterometers with two pencil beams

A scanning pencil-beam scatterometer for ocean windvector determination has potential advantages over the fan-beam systems used and proposed heretofore. The pencil beam permits use of lower transmitter power, and at the same time allows concurrent use of the reflector by a radiometer to correct for atmospheric attenuation and other radiometers for other purposes. The use of dual beams based on the same scanning reflector permits four looks at each cell on the surface, thereby improving accuracy and allowing alias removal. Simulation results for a spaceborne dual-beam scanning scatterometer with a 1-watt radiated power at an orbital altitude of 900 km is described. Two novel algorithms for removing the aliases in the windvector are described, in addition to an adaptation of the conventional maximum likelihood algorithm. The new algorithms are more effective at alias removal than the conventional one. Measurement errors for the wind speed, assuming perfect alias removal, were found to be less than 10%.

Kirimoto, T.↗
NASA NTRS1983

Remote assessment of ocean color for interpretation of satellite visible imagery: A review

An assessment is presented of the state-of-the-art of remote, (satellite-based) Coastal Zone Color (CZCS) Scanning of color variations in the ocean due to phytoplankton. Attention is given to physical problems associated with ocean color remote sensing, in-water algorithms for the correction of atmospheric effects, constituent retrieval algorithms and application of the algorithms to CZCS imagery. The applicability of CZCS to both near-coast and mid-ocean waters is considered, and it is concluded that while differences between the two environments are complex, universal algorithms can be used for the case of mid-ocean waters, and site-specific algorithms are adequate for CZCS imaging of the near-coast oceanic environment. A short description of CVCS and some sample photographs are provided in an appendix.

Gordon, H. R.↗
NASA NTRS1985

Standard value for the radiation length in air

The radiation length in air, was studied. Calculations were finished and give new values for t sub o in atomic oxygen and nitrogen which are entirely free of dependence on the Thomas-Fermi approximate model. With the usual small corrections for atmospheric A and CO2, these give t sub o air = 37.15 g cm/2, in close agreement with a value recommended, but in contrast to t sub o air = 36.66 g cm/2 obtained using the Thomas-Fermi approximation.

Linsley, J.↗
NASA NTRS1984

Reflectance measurements from Landsat Thematic Mapper over rugged terrain

Spectral albedo measurements from the Landsat-4/5 Thematic Mapper require that spacecraft upwelling radiances be corrected for atmospheric absorption and scattering and for local surface illumination. A two-stream model is developed, with a lower boundary condition that varies with incidence angle. TM data must be registered to digital terrain data. Reflectance from points in shadows can be used to estimate optical depth. The primary application here is determination of the spectral albedo of snow. The TM is better-suited for this purpose than the MSS because of its larger dynamic range.

Dozier, J.↗
NASA NTRS1986

Absolute solar flux measurement shortward of 575 A

A rare-gas ionization chamber was used to obtain an accurate measurement of the absolute solar EUV flux in the 50- to 575-A region. The instrument, operating in total and near-total absorption, was flown on a solar-pointing sounding rocket on August 16, 1983. For the day of the flight, the solar activity indices were F sub 10.7 = 132.1 and R sub I = 80, and the integrated solar irradiance at the earth, corrected for atmospheric absorption, was found to be 4.31 + or - 0.31 x 10 to the 10th photons sq cm s. Almost exactly a year earlier (August 10, 1982) the same instrument measured an integrated solar flux of 5.71 + or - 0.42 x 10 to the 10th photons/sq cm s during a time of enhanced solar activity (F sub 10.7 = 209.5 and R sub I = 155).

Ogawa, H. S.↗
NASA NTRS1986

Detection of hydrothermal alteration at Virginia City, Nevada using Airborne Imaging Spectrometry (AIS)

Airborne Imaging Spectrometer (AIS) data were collected over Virginia City, Nevada; an area of gold and silver mineralization with extensive surface exposures of altered volcanic rocks. The data were corrected for atmospheric effects by a flat-field method, and compared to library spectra of various alteration minerals using a spectral analysis program SPAM. Areas of strong clay alteration were identified on the AIS images that were mapped as kaolinitic, illitic, and sericitic alterations zones. Kaolinitic alteration is distinguishable in the 2.1 to 2.4 and 1.2 to 1.5 micrometer wavelength regions. Montmorillonite, illite, and sericite have absorption features similar to each other at 2.2 micrometer wavelength. Montnorillonite and illite also may be present in varying proportions within one Ground Instantaneous Field of View (GIFOV). In general AIS data is useful in identifying alteration zones that are associated with or lie above precious metal mineralization at Virginia City.

Hutsinpiller, A.↗
NASA NTRS1987

Using the thermal infrared multispectral scanner (TIMS) to estimate surface thermal responses

A series of measurements was conducted over the H.J. Andrews, Oregon, experimental coniferous forest, using airborne thermal infrared multispectral scanner (TIMS). Flight lines overlapped, with a 28-min time difference between flight lines. Concurrent radiosonde measurements of atmospheric profiles of air temperature and moisture were used for atmospheric radiance corrections of the TIMS data. Surface temperature differences over time between flight lines were used to develop thermal response numbers (TRNs) which characterized the thermal response (in KJ/sq m/C, where K is the measured incoming solar radiation) of the different surface types. The surface types included a mature forest (canopy dominated by dense crowns of Pseudosuga menziesii, with a secondary canopy of dense Tsuga heterophylla, and also a tall shrub layer of Acer circinatum) and a two-year-old clear-cut. The temperature distribution, within TIMS thermal images was found to reflect the surface type examined. The clear-cut surface had the lowest TRN, while mature Douglas fir the highest.

Luvall, J. C.↗
NASA NTRS1989

Measurements of short-term thermal responses of coniferous forest canopies using thermal scanner data

Thermal Infrared Multispectral Scanner (TIMS) data were collected over a coniferous forest in western Oregon. Concurrent radiosonde measurements of atmospheric profiles of air temperature and moisture provided inputs to LOWTRAN6 for atmospheric radiance corrections of the TIMS data. Surface temperature differences measured by the TIMS over time between flight lines were combined with surface radiative energy balance estimates to develop thermal response numbers (TRN). These numbers characterized the thermal response of the diffent surface types. Barren surfaces had the lowest TRN, whereas the forested surfaces had the highest.

Luvall, J. C.↗
NASA NTRS1989

Modeling surface temperature distributions in forest landscapes

A model of the frequency distributions of the spatial variability in surface temperature is presented. Surface temperature data are obtained from two daytime and two nighttime flights of the Thermal IR Multispectral Scanner (TIMS) over forest land in western Oregon in August, 1985. The temperature values are corrected for atmospheric attenuation and thermal radiation emission with the LOWTRAN-6 algorithm. The temperature distributions were modeled with a two-parameter beta probability density distribution and the fit of the model was evaluated by comparison with the TIMS data set. Use of the model's parameters to identify and classify surface types shows good discrimination among various surfaces for the daytime images, with less distinct discrimination for the nighttime images.

Holbo, H. R.↗
NASA NTRS1990

Limits on the antiproton/proton ratio in the cosmic radiation from 100 MeV to 1580 MeV

A search for antiprotons (p-bars) in the cosmic radiation with energies below 1580 MeV at the top of the atmosphere was performed using the PBAR balloon-borne magnetic spectrometer. No antiprotons were observed in 124,000 proton events. For the energy interval 100-640 MeV, an upper limit is reported to the p-bar/p ratio of 2.8 x 10 to the -5th at the top of the atmosphere, after correcting for instrumental efficiencies and contributions from secondary particles. No antiproton was observed in the energy interval 640-1580 MeV, which yields an upper limit to the p-bar/p ratio of 6.1 x 10. By combining both data sets, the limits on the p-bar/p ratio can be improved to 2.0 x 10 to the -5th. The detector performance and instrumental efficiencies of the individual detector components are discussed. A detail Monte Carlo calculation was used to evaluate the instrumental efficiency for both antiprotons and protons as a function of momentum.

Salamon, M. H.↗
NASA NTRS1989

Photometric lightcurve observations and reduction techniques

Photoelectric light curves were used to determine the period of rotation, obtain the estimates of shape and pole orientation, and define the phase relation, or brightness as a function of solar phase angle, of asteroids. Methods for taking and reducing observations are described, with particular consideration given to the correction for atmospheric extinction, the use of Fourier analysis in constructing composite light curves, and the analysis of errors. Also discussed are computer programs that solve two principal problems: the determination of the time-variable extinction function for a night and the constuction of composite light curves.

Harris, A. W.↗