Search NASA⌕ Search

SEARCH · Search NASA

Results for “CARRIER MODULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Ultrathin Lutetium Oxide Film as an Epitaxial Hole-Blocking Layer for Crystalline Bismuth Vanadate Water Splitting Photoanodes

Here a novel ultrathin lutetium oxide (Lu 2 O 3 ) interlayer is integrated with crystalline bismuth vanadate (BiVO4) thin film photoanodes to facilitate carrier transport through atomic-scale interface control. The epitaxial Lu 2 O 3 2 O 3</sub interlayer modulates the electronic conduction pathways along structural grain boundaries and determines the overall device performance. This study provides more information on the nature of interface-engineered carrier transport for efficient photoelectrode heterostructure design.

36 MATERIALS SCIENCE↗

Metal modulation epitaxy growth for extremely high hole concentrations above 10{sup 19} cm{sup -3} in GaN

The free hole carriers in GaN have been limited to concentrations in the low 10{sup 18} cm{sup -3} range due to the deep activation energy, lower solubility, and compensation from defects, therefore, limiting doping efficiency to about 1%. Herein, we report an enhanced doping efficiency up to {approx}10% in GaN by a periodic doping, metal modulation epitaxy growth technique. The hole concentrations grown by periodically modulating Ga atoms and Mg dopants were over {approx}1.5x10{sup 19} cm{sup -3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Efficient prediction of terahertz quantum cascade laser dynamics from steady-state simulations

Terahertz-frequency quantum cascade lasers (THz QCLs) based on bound-to-continuum active regions are difficult to model owing to their large number of quantum states. We present a computationally efficient reduced rate equation (RE) model that reproduces the experimentally observed variation of THz power with respect to drive current and heat-sink temperature. We also present dynamic (time-domain) simulations under a range of drive currents and predict an increase in modulation bandwidth as the current approaches the peak of the light–current curve, as observed experimentally in mid-infrared QCLs. We account for temperature and bias dependence of the carrier lifetimes, gain, and injection efficiency, calculated from a full rate equation model. The temperature dependence of the simulated threshold current, emitted power, and cut-off current are thus all reproduced accurately with only one fitting parameter, the interface roughness, in the full REs. We propose that the model could therefore be used for rapid dynamical simulation of QCL designs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Active cryogenic electronic envelope

A data acquisition module is disclosed for use with electronic components such as superconductive magnets wherein the electronic components and the data acquisition module may reside inside a cryostat. The data acquisition module allows conventional electronic technologies to work inside cryostats at cryogenic temperatures as low as 4° K. This is achieved by management of heat inside the module to keep the module operating at a temperature above the cryogenic temperature. This approach avoids the difficulties that arise from changes in carrier mobility in semiconductors operating at deep cryogenic temperatures. A cryogenic system comprises a cryostat containing a cryogenic fluid and at least one sensor, and a data acquisition module located within the cryostat, the module in communication with the at least one sensor to acquire data, wherein the module comprises a thermal package, a conditioning and digitizing electronic module, a controller module, a power module, and a thermal management module.

42 ENGINEERING↗

Multiple-carrier-lifetime model for carrier dynamics in InGaN/GaN LEDs with a non-uniform carrier distribution

Here we introduce a multiple-carrier-lifetime model (MCLM) for light-emitting diodes (LEDs) with non-uniform carrier distribution, such as in multiple-quantum-well (MQW) structures. By employing the MCLM, we successfully explain the modulation response of V-pit engineered MQW LEDs, which exhibit an S 21 roll-off slower than –20 dB/decade. Using the proposed model and employing a gradient descent method, we extract effective recombination and escape lifetimes by averaging the carrier behavior across the quantum wells. Our results reveal slower effective carrier recombination and escape in MQW LEDs compared with LEDs emitting from a single QW, indicating the advantages of lower carrier density achieved through V-pit engineering. Notably, the effective carrier recombination time is more than one order of magnitude lower than the effective escape lifetime, suggesting that most carriers in the quantum wells recombine, while the escape process remains weak. To ensure the reliability and robustness of the MCLM, we subject it to a comprehensive threefold validation process. This work confirms the positive impact of spreading carriers into several quantum wells through V-pit engineering. In addition, the MCLM is applicable to other LEDs with a non-uniform carrier distribution, such as micro-LEDs with significant surface recombination and non-uniform lateral carrier profiles.

42 ENGINEERING↗

Terahertz metamaterials

In this paper we present our recent developments in terahertz (THz) metamaterials and devices. Planar THz metamaterials and their complementary structures fabricated on suitable substrates have shown electric resonant response, which causes the band-pass or band-stop property in THz transmission and reflection. The operational frequency can be further tuned up to 20% upon photoexcitation of an integrated semiconductor region in the splitring resonators as the metamaterial elements. On the other hand, the use of semiconductors as metamaterial substrates enables dynamical control of metamaterial resonances through photoexcitation, and reducing the substrate carrier lifetime further enables an ultrafast switching recovery. The metamaterial resonances can also be actively controlled by application of a voltage bias when they are fabricated on semiconductor substrates with appropriate doping concentration and thickness. Using this electrically driven approach, THz modulation depth up to 80% and modulation speed of 2 MHz at room temperature have been demonstrated, which suggests practical THz applications.

36 MATERIALS SCIENCE↗

Electric field modulation of thermovoltage in single-layer MoS{sub 2}

We study electric field modulation of the thermovoltage in single-layer MoS{sub 2}. The Seebeck coefficient generally increases for a diminishing free carrier concentration, and in the case of single-layer MoS{sub 2} reaches considerable large values of about S = −5160 μV/K at a resistivity of 490 Ω m. Further, we observe time dependent degradation of the conductivity in single layer MoS{sub 2}, resulting in variations of the Seebeck coefficient. The degradation is attributable to adsorbates from ambient air, acting as p-dopants and additional Coulomb potentials, resulting in carrier scattering increase, and thus decrease of the electron mobility. The corresponding power factors remain at moderate levels, due to the low conductivity of single layer MoS{sub 2}. However, as single-layer MoS{sub 2} has a short intrinsic phonon mean free path, resulting in low thermal conductivity, MoS{sub 2} holds great promise as high-performance 2D thermoelectric material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measuring charge carrier mobility in photovoltaic devices with micron-scale resolution

We present a charge-extraction technique, micron-scale charge extraction by linearly increasing voltage, which enables simultaneous spatially resolved measurements of charge carrier mobility and photocurrent in thin-film photovoltaic devices with micron-scale resolution. An intensity-modulated laser with beam diameter near the optical diffraction limit is scanned over the device, while a linear voltage ramp in reverse bias is applied at each position of illumination. We calculate the majority carrier mobility, photocurrent, and number of photogenerated charge carriers from the resulting current transient. We demonstrate this technique on an organic photovoltaic device, but it is applicable to a wide range of photovoltaic materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mir environmental effects payload handrail clamp/pointing device

The Mir Environmental Effects Payload (MEEP) consists of four International Space Station Alpha (ISSA) Risk mitigation experiments to be transported and deployed in a common carrier. This carrier is to be transported to the Mir Space Station aboard the Space Shuttle and deployed during a US Extravehicular Activity (EVA) on the handrails of the Mir Docking Module (DM). This paper describes the design of the handrail clamp/ pointing device used by the astronauts to attach the carrier to the station.

Hughes, Stephen J.↗

Effects Of Phase Jitter On Lock Detection In QPSK

Report presents study of performances of digital carrier-signal-tracking loops used in reception of radio signals containing quadrature-phase-shift-keyed (QPSK) modulation representing binary non-return-to-zero data. Presents mathematical models of received signal and of noise. Describes lock-detector algorithm and presents equations characterizing lock-detection performance. Equations applied in analyses of three QPSK carrier-tracking loops: Costas crossover loop, maximum a posteriori estimation loop, and generalized Costas loop. Results of computer simulations agree with equations.

Mileant, Alexander↗

Mission Engineering of a Rapid Cycle Spacecraft Logistics Fleet

The requirement for logistics re-supply of the International Space Station has provided a unique opportunity for engineering the implementation of NASA's first dedicated pressurized logistics carrier fleet. The NASA fleet is comprised of three Multi-Purpose Logistics Modules (MPLM) provided to NASA by the Italian Space Agency in return for operations time aboard the International Space Station. Marshall Space Flight Center was responsible for oversight of the hardware development from preliminary design through acceptance of the third flight unit, and currently manages the flight hardware sustaining engineering and mission engineering activities. The actual MPLM Mission began prior to NASA acceptance of the first flight unit in 1999 and will continue until the de-commission of the International Space Station that is planned for 20xx. Mission engineering of the MPLM program requires a broad focus on three distinct yet inter-related operations processes: pre-flight, flight operations, and post-flight turn-around. Within each primary area exist several complex subsets of distinct and inter-related activities. Pre-flight processing includes the evaluation of carrier hardware readiness for space flight. This includes integration of payload into the carrier, integration of the carrier into the launch vehicle, and integration of the carrier onto the orbital platform. Flight operations include the actual carrier operations during flight and any required real-time ground support. Post-flight processing includes de-integration of the carrier hardware from the launch vehicle, de-integration of the payload, and preparation for returning the carrier to pre-flight staging. Typical space operations are engineered around the requirements and objectives of a dedicated mission on a dedicated operational platform (i.e. Launch or Orbiting Vehicle). The MPLM, however, has expanded this envelope by requiring operations with both vehicles during flight as well as pre-launch and post-landing operations. These unique requirements combined with a success-oriented schedule of four flights within a ten-month period have provided numerous opportunities for understanding and improving operations processes. Furthermore, it has increased the knowledge base of future Payload Carrier and Launch Vehicle hardware and requirement developments. Discussion of the process flows and target areas for process improvement are provided in the subject paper. Special emphasis is also placed on supplying guidelines for hardware development. The combination of process knowledge and hardware development knowledge will provide a comprehensive overview for future vehicle developments as related to integration and transportation of payloads.

Holladay, Jon↗

Ferroelectricity‐Enhanced Piezo‐Phototronic Effect in 2D V‐Doped ZnO Nanosheets

Emerging 2D electronic materials have shown great potential for regulating and controlling optoelectronic processes. A 2D ferroelectric semiconductor coupled with the piezo-phototronic effect may bring unprecedented functional characteristics. Here, a heterojunction photodetector made of p-Si/V-doped-ferroelectric-ZnO 2D nanosheets (FESZ-PD) is fabricated, and the ferroelectricity-enhanced piezo-phototronic effect on the photoresponse behavior of the FESZ-PD is carefully investigated. By introducing the ferroelectricity and the piezo-phototronic effect, improved current rectification performance is achieved and the photoresponse performance of the heterojunction is enhanced in a broad spectral range. The applied voltage bias during measurement naturally causes ferroelectric spontaneous polarizations to align, resulting in a change in band structure near the interface and the local piezo-phototronic effect. The modulated energy band promotes the generation, separation, and transportation efficiency of photogenerated carriers greatly. Compared with the Si/ZnO 2D nanosheets photodetector without ferroelectricity under strain-free conditions, the photoresponsivity R of the FESZ-PD increases by 2.4 times when applying a -0.20‰ compressive strain at +1 V forward bias. These results confirm the feasibility of coupling the ferroelectricity with the piezo-phototronic effect in 2D ferroelectric materials to enhance the photoresponse behavior, which provides a good way to enable the development of high-performance electronic and optoelectronic devices.

36 MATERIALS SCIENCE↗

Divergent Mechanistic Routes for the Formation of gem-Dimethyl Groups in the Biosynthesis of Complex Polyketides

The gem-dimethyl groups in polyketide-derived natural products add steric bulk and, accordingly, lend increased stability to medicinal compounds, however, our ability to rationally incorporate this functional group in modified natural products is limited. In order to characterize the mechanism of gem-dimethyl group formation, with a goal toward engineering of novel compounds containing this moiety, the gem-dimethyl group producing polyketide synthase (PKS) modules of yersiniabactin and epothilone were characterized using mass spectrometry. The work demonstrated, contrary to the canonical understanding of reaction order in PKSs, that methylation can precede condensation in gem-dimethyl group producing PKS modules. Experiments showed that both PKSs are able to use dimethylmalonyl acyl carrier protein (ACP) as an extender unit. Interestingly, for epothilone module8, use of dimethylmalonyl-ACP appeared to be the sole route to form a gem-dimethylated product, while the yersiniabactin PKS could methylate before or after ketosynthase condensation.

Poust, S↗

Gate-tunable ReS{sub 2}/MoTe{sub 2} heterojunction with high-performance photodetection

Van der Waals heterojunctions based on atomically thin two-dimensional (2D) materials have attracted numerous attention for their special scientific research value and promising applications in photoelectric and micro-nano electronic devices. Especially, the carrier generation, separation, and extraction process in 2D materials can be easily modulated by external field, which may facilitate some multifunctional electronics and optoelectronics. In this paper, we report a unique type-II band alignment ReS{sub 2}/MoTe{sub 2} heterojunction with rectification inversion due to the fact the bottom few-layer MoTe{sub 2} can be easily tuned from p-type to n-type state through the applied back-gate voltage. Then we study photodetection properties of ReS{sub 2}/MoTe{sub 2} heterojunction, a relatively fast photoresponse time of 109 μs and a considerable photoresponsivity of 0.34 AW{sup −1} for 520 nm at room temperature show great potential in photodetection. Our studies of ReS{sub 2}/MoTe{sub 2} heterojunction with rectification inversion and high-performance photodetection will facilitate the development of electronics and optoelectronics based on atomically-thin heterojunctions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Charge Transport across DNA-Based Three-Way Junctions

DNA-based molecular electronics will require charges to be transported from one site within a 2D or 3D architecture to another. While this has been shown previously in linear, π-stacked DNA sequences, the dynamics and efficiency of charge transport across DNA three-way junction (3WJ) have yet to be determined. Here, we present an investigation of hole transport and trapping across a DNA-based three-way junction systems by a combination of femtosecond transient absorption spectroscopy and molecular dynamics simulations. Hole transport across the junction is proposed to be gated by conformational fluctuations in the ground state which bring the transiently populated hole carrier nucleobases into better aligned geometries on the nanosecond time scale, thus modulating the π–π electronic coupling along the base pair sequence.

59 BASIC BIOLOGICAL SCIENCES↗

Ultrafast charge transfer coupled with lattice phonons in two-dimensional covalent organic frameworks

Covalent organic frameworks (COFs) have emerged as a promising light-harvesting module for artificial photosynthesis and photovoltaics. For efficient generation of free charge carriers, the donor–acceptor (D-A) conjugation has been adopted for two-dimensional (2D) COFs recently. In the 2D D-A COFs, photoexcitation would generate a polaron pair, which is a precursor to free charge carriers and has lower binding energy than an exciton. Although the character of the primary excitation species is a key factor in determining optoelectronic properties of a material, excited-state dynamics leading to the creation of a polaron pair have not been investigated yet. Here, we investigate the dynamics of photogenerated charge carriers in 2D D-A COFs by combining femtosecond optical spectroscopy and non-adiabatic molecular dynamics simulation. From this investigation, we elucidate that the polaron pair is formed through ultrafast intra-layer hole transfer coupled with coherent vibrations of the 2D lattice, suggesting a mechanism of phonon-assisted charge transfer

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring the coercivity in ferromagnetic ZnO thin films by 3d and 4f elements codoping

Cluster free, Co (3d) and Eu (4f) doped ZnO thin films were prepared using ion implantation technique accompanied by post annealing treatments. Compared with the mono-doped ZnO thin films, the samples codoped with Co and Eu exhibit a stronger magnetization with a giant coercivity of 1200 Oe at ambient temperature. This was further verified through x-ray magnetic circular dichroism analysis, revealing the exchange interaction between the Co 3d electrons and the localized carriers induced by Eu{sup 3+} ions codoping. The insight gained with modulating coercivity in magnetic oxides opens up an avenue for applications requiring non-volatility in spintronic devices.

36 MATERIALS SCIENCE↗