Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cartesian”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

661 records · Page 37

Numerical benchmark for very high-temperature reactors based on the CNPS critical experiments.

An evaluation of the Compact Nuclear Power Source (CNPS) experiments conducted at Los Alamos National Laboratory in the 1980s has been done using information available in the open literature. The MCNP4C Monte Carlo results for critical test configurations are in good agreement with the experimental values; the k{sub eff} values are generally within 0.5% of the experimental values. The calculated total and differential rod worths and material worths were also found generally close to experimental values. These good results motivated the utilization of the experimental test data for the specification of two- and three-dimensional numerical benchmark cases that could be used for the verification and validation of core physics codes developed for Very High Temperature Reactor (VHTR) analysis, particularly the deterministic lattice and whole-core physics codes. To define the benchmark cases, the irregular arrangement of channels in the actual CNPS core was simplified to a regular Cartesian geometry arrangement in the benchmark cases, while preserving the important neutronics characteristics of the CNPS. The results of deterministic calculations using the HELIOS/DIF3D code package were compared to MCNP4C results to show the usefulness of the numerical benchmark cases.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

The Prospect of using Three-Dimensional Earth Models To Improve Nuclear Explosion Monitoring and Ground Motion Hazard Assessment

The last ten years have brought rapid growth in the development and use of three-dimensional (3D) seismic models of Earth structure at crustal, regional and global scales. In order to explore the potential for 3D seismic models to contribute to important societal applications, Lawrence Livermore National Laboratory (LLNL) hosted a 'Workshop on Multi-Resolution 3D Earth Models to Predict Key Observables in Seismic Monitoring and Related Fields' on June 6 and 7, 2007 in Berkeley, California. The workshop brought together academic, government and industry leaders in the research programs developing 3D seismic models and methods for the nuclear explosion monitoring and seismic ground motion hazard communities. The workshop was designed to assess the current state of work in 3D seismology and to discuss a path forward for determining if and how 3D Earth models and techniques can be used to achieve measurable increases in our capabilities for monitoring underground nuclear explosions and characterizing seismic ground motion hazards. This paper highlights some of the presentations, issues, and discussions at the workshop and proposes two specific paths by which to begin quantifying the potential contribution of progressively refined 3D seismic models in critical applied arenas. Seismic monitoring agencies are tasked with detection, location, and characterization of seismic activity in near real time. In the case of nuclear explosion monitoring or seismic hazard, decisions to further investigate a suspect event or to launch disaster relief efforts may rely heavily on real-time analysis and results. Because these are weighty decisions, monitoring agencies are regularly called upon to meticulously document and justify every aspect of their monitoring system. In order to meet this level of scrutiny and maintain operational robustness requirements, only mature technologies are considered for operational monitoring systems, and operational technology necessarily lags contemporary research. Current monitoring practice is to use relatively simple Earth models that generally afford analytical prediction of seismic observables (see Examples of Current Monitoring Practice below). Empirical relationships or corrections to predictions are often used to account for unmodeled phenomena, such as the generation of S-waves from explosions or the effect of 3-dimensional Earth structure on wave propagation. This approach produces fast and accurate predictions in areas where empirical observations are available. However, accuracy may diminish away from empirical data. Further, much of the physics is wrapped into an empirical relationship or correction, which limits the ability to fully understand the physical processes underlying the seismic observation. Every generation of seismology researchers works toward quantitative results, with leaders who are active at or near the forefront of what has been computationally possible. While recognizing that only a 3-dimensional model can capture the full physics of seismic wave generation and propagation in the Earth, computational seismology has, until recently, been limited to simplifying model parameterizations (e.g. 1D Earth models) that lead to efficient algorithms. What is different today is the fact that the largest and fastest machines are at last capable of evaluating the effects of generalized 3D Earth structure, at levels of detail that improve significantly over past efforts, with potentially wide application. Advances in numerical methods to compute travel times and complete seismograms for 3D models are enabling new ways to interpret available data. This includes algorithms such as the Fast Marching Method (Rawlison and Sambridge, 2004) for travel time calculations and full waveform methods such as the spectral element method (SEM; Komatitsch et al., 2002, Tromp et al., 2005), higher order Galerkin methods (Kaser and Dumbser, 2006; Dumbser and Kaser, 2006) and advances in more traditional Cartesian finite difference methods (e.g. Pitarka, 1999; Nilsson et al., 2007). The ability to compute seismic observables using a 3D model is only half of the challenge; models must be developed that accurately represent true Earth structure. Indeed, advances in seismic imaging have followed improvements in 3D computing capability (e.g. Tromp et al., 2005; Rawlinson and Urvoy, 2006). Advances in seismic imaging methods have been fueled in part by theoretical developments and the introduction of novel approaches for combining different seismological observables, both of which can increase the sensitivity of observations to Earth structure. Examples of such developments are finite-frequency sensitivity kernels for body-wave tomography (e.g. Marquering et al., 1998; Montelli et al., 2004) and joint inversion of receiver functions and surface wave group velocities (e.g. Julia et al., 2000).

58 GEOSCIENCES↗

Efficient fluid-structure interaction simulation of viscoplastic and fracturing thin-shells subjected to underwater shock loading

The fluid-structure interaction simulation of shock-loaded thin-walled structures requires numerical methods that can cope with large deformations as well as local topology changes. We present a robust level-set-based approach that integrates a Lagrangian thin-shell finite element solver with fracture and fragmentation capabilities into an Eulerian Cartesian fluid solver with embedded boundary and mesh adaptation capability. As main computational applications, we consider the plastic deformation and rupture of thin plates subjected to explosion and piston-induced pressure waves in water.

42 ENGINEERING↗

Interface Reconstruction with Directional Walking

Young's interface reconstruction with three-dimensional arbitrary mesh, in general, is rather tedious to implement compared to the case of a regular mesh. The main difficulty comes from the construction of a planar facet that bounds a certain volume inside a cell. Unlike the five basic configurations with a Cartesian mesh, there can be a great number of different configurations in the case of a general mesh. We represent a simple method that can derive the topology/geometry of the intersection of arbitrary planar objects in a uniform way. The method is based on a directional walking on the surface of objects, and links the intersection points with the paths of the walking naturally defining the intersection of objects. The method works in both two and three dimensions. The method does not take advantage of convexity, thus decomposition of an object is not necessary. Therefore, the solution with this method will have a reduced number of edges and less data storage, compared with methods that use shape decomposition. The treatment is general for arbitrary polyhedrons, and no look-up tables are needed. The same operation can easily be extended for curved geometry. The implementation of this new algorithm shall allow the interface reconstruction on an arbitrary mesh to be as simple as it is on a regular mesh. Furthermore, we exactly compute the integral of partial cell volume bounded by quadratic interface. Therefore, interface reconstruction with higher than second order accuracy can be achieved on an arbitrary mesh.

99 GENERAL AND MISCELLANEOUS↗

TOWARD END-TO-END MODELING FOR NUCLEAR EXPLOSION MONITORING: SIMULATION OF UNDERGROUND NUCLEAR EXPLOSIONS AND EARTHQUAKES USING HYDRODYNAMIC AND ANELASTIC SIMULATIONS, HIGH-PERFORMANCE COMPUTING AND THREE-DIMENSIONAL EARTH MODELS

This paper describes new research being performed to improve understanding of seismic waves generated by underground nuclear explosions (UNE) by using full waveform simulation, high-performance computing and three-dimensional (3D) earth models. The goal of this effort is to develop an end-to-end modeling capability to cover the range of wave propagation required for nuclear explosion monitoring (NEM) from the buried nuclear device to the seismic sensor. The goal of this work is to improve understanding of the physical basis and prediction capabilities of seismic observables for NEM including source and path-propagation effects. We are pursuing research along three main thrusts. Firstly, we are modeling the non-linear hydrodynamic response of geologic materials to underground explosions in order to better understand how source emplacement conditions impact the seismic waves that emerge from the source region and are ultimately observed hundreds or thousands of kilometers away. Empirical evidence shows that the amplitudes and frequency content of seismic waves at all distances are strongly impacted by the physical properties of the source region (e.g. density, strength, porosity). To model the near-source shock-wave motions of an UNE, we use GEODYN, an Eulerian Godunov (finite volume) code incorporating thermodynamically consistent non-linear constitutive relations, including cavity formation, yielding, porous compaction, tensile failure, bulking and damage. In order to propagate motions to seismic distances we are developing a one-way coupling method to pass motions to WPP (a Cartesian anelastic finite difference code). Preliminary investigations of UNE's in canonical materials (granite, tuff and alluvium) confirm that emplacement conditions have a strong effect on seismic amplitudes and the generation of shear waves. Specifically, we find that motions from an explosion in high-strength, low-porosity granite have high compressional wave amplitudes and weak shear waves, while an explosion in low strength, high-porosity alluvium results in much weaker compressional waves and low-frequency compressional and shear waves of nearly equal amplitude. Further work will attempt to model available near-field seismic data from explosions conducted at NTS, where we have accurate characterization of the sub-surface from the wealth of geological and geophysical data from the former nuclear test program. Secondly, we are modeling seismic wave propagation with free-surface topography in WPP. We have model the October 9, 2006 and May 25, 2009 North Korean nuclear tests to investigate the impact of rugged topography on seismic waves. Preliminary results indicate that the topographic relief causes complexity in the direct P-waves that leads to azimuthally dependent behavior and the topographic gradient to the northeast, east and southeast of the presumed test locations generate stronger shear-waves, although each test gives a different pattern. Thirdly, we are modeling intermediate period motions (10-50 seconds) from earthquakes and explosions at regional distances. For these simulations we run SPECFEM3D{_}GLOBE (a spherical geometry spectral element code). We modeled broadband waveforms from well-characterized and well-observed events in the Middle East and central Asia, as well as the North Korean nuclear tests. For the recent North Korean test we found that the one-dimensional iasp91 model predicts the observed waveforms quite well in the band 20-50 seconds, while waveform fits for available 3D earth models are generally poor, with some exceptions. Interestingly 3D models can predict energy on the transverse component for an isotropic source presumably due to surface wave mode conversion and/or multipathing.

58 GEOSCIENCES↗

Considerations for autofocus of spotlight-mode SAR imagery created using a beamforming algorithm.

In recent papers the authors discussed the advantages of forming spotlight-mode SAR imagery from phase history data via a technique that is rooted in the principles of phased-array beamforming, which is closely related to back-projection. The application of a traditional autofocus algorithm, such as Phase Gradient Autofocus (PGA), requires some care in this situation. Specifically, a stated advantage of beamforming is that it easily allows for reconstruction of the SAR image onto an arbitrary imaging grid. One very useful grid, for example, is a Cartesian grid in the ground plane. Autofocus via PGA for such an image, however, cannot be performed in a straightforward manner, because in PGA a Fourier transform relationship is required between the image domain and the range-compressed phase history, and this is not the case for such an imaging grid. In this paper we propose a strategy for performing autofocus in this situation, and discuss its limitations. We demonstrate the algorithm on synthetic phase errors applied to real SAR imagery.

47 OTHER INSTRUMENTATION↗

Robust and Accurate Filtered Spherical Harmonics Expansions for Radiative Transfer

We present a novel application of lters to the spherical harmonics (PN) expansion for radiative transfer problems in the high energy density regime. The lter we use is based on non-oscillatory spherical splines and a lter strength chosen to (i) preserve the equilibrium di usion limit and (ii) vanish as the expansion order tends to in nity. Our implementation is based on modi ed equations that are derived by applying the lter after every time step in a simple rst-order time integration scheme. The method is readily applied to existing codes that solve the PN equations. Numerical results demonstrate that the solution to the ltered PN equations are (i) more robust and less oscillatory than standard PN solutions and (ii) more accurate than discrete ordinates solutions of comparable order. In particular, the ltered P7 solution demonstrates comparable accuracy to an implicit Monte Carlo solution for a benchmark hohlraum problem in 2-D Cartesian geometry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

kasacrgridppi.c1

This datastream is made by kasacrgridppi VAP. It has (time, Y, X) gridded Ka-band PPI radar data, using nearest neighbor algorithm, with calibrated (.b1) input. This datastream is very similar to kasacrgridrhi, with the output grid changed from (time, height, h_distance) to (time, Y, X). output c1 level data use calibrated b1 data as input.

54 ENVIRONMENTAL SCIENCES↗

xsacrgridppi.c0

This datastream is made by xsacrgridppi VAP. It has (time, Y, X) gridded Ka-band PPI radar data, using nearest neighbor algorithm, with uncalibrated (.a1) input.

54 ENVIRONMENTAL SCIENCES↗

xsacrgridppi.c1

This datastream is made by xsacrgridppi VAP. It has (time, Y, X) gridded Ka-band PPI radar data, using nearest neighbor algorithm, with calibrated (.b1) input.

54 ENVIRONMENTAL SCIENCES↗

Multi-Doppler radar analysis from CSAPR, CHIVO, COW, and RMA-1 radars during the CACTI/RELAMPAGO experiments in Argentina in 2018

This data set contains multi-Doppler radar analysis from CSAPR-2, CSU-CHIVO, COW, and RMA-1 radars. These radars were collecting dual-polarization data during the CACTI/RELAMPAGO experiments in Argentina in 2018. Doppler analysis is systematically conducted for 31 days with convection. Three-dimensional wind fields are retrieved using the PyDDA algorithm. Dual-polarization information is also included in the data set.

3D cartesian gridded corrected mean Doppler veloci↗