Search NASA⌕ Search

SEARCH · Search NASA

Results for “Collective levels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Power increases using wind direction spatial filtering for wind farm control: Evaluation using FLORIS, modified for dynamic settings

As wind energy plays a growing role in the energy sector, new methods for controlling wind turbines and wind farms to maximize performance are garnering industry interest. A developing body of research treats the entire wind farm as a control system, with individual turbines acting as agents in a network, allowing farm-level objectives to be considered. Two promising developments in this research are wake steering control, which seeks to increase the power generated at a wind farm by directing the wakes of upstream turbines away from downstream ones, and communication-based spatial filtering, which seeks to improve the quality of information used by turbine- and farm-level controllers by combining measurements of the wind field collected at the individual turbines. The latter method has been shown to improve the estimates of wind direction at the turbines; however, the resulting potential for increased power capture warrants further investigation. With this paper, we begin to address this gap by combining wake steering with wind direction spatial filtering. To do so, we present a preliminary method for assessing the power capture of dynamic controllers using wind farm codes designed for time-averaged simulation. This allows us to generate results much more rapidly than would be possible using high-fidelity wind farm simulators and may be useful in many wind farm control design applications.

17 WIND ENERGY↗
DOE OSTI2021

Metabolic profiling of epidermal and mesophyll tissues under water-deficit stress in Opuntia ficus-indica reveals stress-adaptive metabolic responses

Cactus pear (Opuntia ficus-indica) is a high productivity species within the Cactaceae grown in many semiarid parts of the world for food, fodder, forage, and biofuels. O. ficus-indica utilises obligate crassulacean acid metabolism (CAM), an adaptation that greatly improves water-use efficiency (WUE) and reduces crop water usage. To better understand CAM-related metabolites and water-deficit stress responses of O. ficus-indica, comparative metabolic profiling was performed on mesophyll and epidermal tissues collected from well-watered and water-deficit stressed cladodes at 50% relative water content (RWC). Tissues were collected over a 24-h period to identify metabolite levels throughout the diel cycle and analysed using a combination of acidic/basic ultra-high-performance liquid chromatography/tandem mass spectrometry (UHPLC/MS/MS) and gas chromatography/mass spectrometry (GC/MS) platforms. A total of 382 metabolites, including 210 (55%) named and 172 (45%) unnamed compounds, were characterised across both tissues. Most tricarboxylic acid (TCA) cycle and glycolysis intermediates were depleted in plants undergoing water-deficit stress indicative of CAM idling or post-idling, while the raffinose family oligosaccharides (RFO) accumulated in both mesophyll and epidermal tissues as osmoprotectants. Levels of reduced glutathione and other metabolites of the ascorbate cycle as well as oxylipins, stress hormones such as traumatic acid, and nucleotide degradation products were increased under water-deficit stress conditions. Notably, tryptophan accumulation, an atypical response, was significantly (24-fold) higher during all time points in water-deficit stressed mesophyll tissue compared with well-watered controls. Many of the metabolite increases were indicative of a highly oxidising environment under water-deficit stress. A total of 34 unnamed metabolites also accumulated in response to water-deficit stress indicating that such compounds might play important roles in water-deficit stress tolerance.

Plant Sciences↗
DOE OSTI2022

Solving nuclear structure problems with the adaptive variational quantum algorithm

Here we use the Lipkin-Meshkov-Glick (LMG) model and the valence-space nuclear shell model to examine the likely performance of variational quantum eigensolvers in nuclear-structure theory. The LMG model exhibits both a phase transition and spontaneous symmetry breaking at the mean-field level in one of the phases, features that characterize collective dynamics in medium-mass and heavy nuclei. We show that with appropriate modifications, the ADAPT-VQE algorithm, a particularly flexible and accurate variational approach, is not troubled by these complications. We treat up to 12 particles and show that the number of quantum operations needed to approach the ground-state energy scales linearly with the number of qubits. We find similar scaling when the algorithm is applied to the nuclear shell model with realistic interactions in the sd and pf shells. Although most of these simulations contain no noise, we use a noise model from real IBM hardware to show that for the LMG model with four particles, weak noise has no effect on the efficiency of the algorithm.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

EAGLE-I Power Outage Data 2014 - 2022

The provided EAGLE-I historic dataset includes eight years of power outage information at the county level from 2014 to 2022 at 15-minute intervals collected by the EAGLE-I program at ORNL. The data has been collected from utility's public outage maps using an ETL process. The dataset details FIPS code, county name, state name, total number of customers without power, and a date/timestamp. Also included is the EAGLE-I coverage of each state for each year. For detailed metadata, refer to the metadata DOI.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Smart Manufacturing Pathways for Industrial Decarbonization and Thermal Process Intensification

Rapid decarbonization is fast becoming the primary environmental and sustainability initiative for many economic sectors. Industry consumes more than 30 % of all primary energy in the United States and accounts for nearly 25 % of all greenhouse gas (GHG) emissions. More than 70 % of energy consumed by the industrial sector is related to thermal processes, which are also the largest contributors of carbon emissions, overwhelmingly due to the combustion of fossil fuels. Thermal process intensification (TPI) seeks to dramatically improve the energy performance of thermal systems through technology pillars focusing on alternative energy sources and processes, supplemental technologies, and waste heat management. The impacts of TPI have significant overlap with the goals of industrial decarbonization (ID) that seeks to phase out all GHG emissions from industrial activities. Emerging supplemental technologies such as smart manufacturing (SM) and the industrial internet of things (IoT) enable significant opportunities for the optimization of manufacturing processes. Combining strategies for TPI and ID with SM and IoT can open and enhance existing opportunities for saving time and energy via approaches such as tighter control of temperature zones, better adjustment of thermal systems for variations in production levels and feedstock properties, and increased process throughput. Data collected by smart processes will also enable new advanced solutions such as digital twins and machine learning algorithms to further improve thermal system savings. Herein, this paper examines the individual pathways of TPI, ID, and SM and how the combination of all three can accelerate energy and GHG reductions.

42 ENGINEERING↗
DOE OSTI2021

Load Forecasting for the Moroccan Electricity Sector

The Moroccan electricity sector is undergoing rapid transformation as it seeks to increase its utilization of renewable energy from its abundant domestic supply. Key to implementing variable renewable energy is understanding current electricity demand and forecasting this demand on the long, medium, and short timescales. This report leverages existing Moroccan electricity sector data to build basic load forecasts on these timescales. Taking these forecasts, the report recommends next steps in terms of additional algorithms, mathematical models, data collection, and scenarios (such as vehicle electrification or high levels of distributed generation) that should be examined for advanced load forecasts.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Advancing Post-Combustion CO 2 Capture through Increased Mass Transfer and Lower Degradation

The over-arching goal of the proposed project is to develop three techniques to enable aqueous post-combustion CO 2 capture technologies to meet the DOE performance and cost targets of 90% CO 2 capture, 95% purity, at a cost of less than $30/tonne CO 2 captured. This will be accomplished by the development of materials and processes to increase mass transfer in the absorber and reduce the environmental impacts. While constantly working to reduce the cost of CO 2 capture via solvent development and process & heat integration, increasing CO 2 mass transfer through development of custom dynamic packing materials and tuning solvent physical properties may offer a route to increased solvent capacity, lower energy consumption and reduced aerosol formation. The environmental concerns that have been identified in amine-based CO 2 capture systems, nitrosamines specifically, are another critical element that will be addressed in this project. The specific objectives of the project were to: 1) conduct detailed studies to understand how solvent physical properties and aerosol formation are impacted by additives; 2) quantify the CO 2 mass transfer improvement from the dynamic polarity packing in the absorber and the additive-modified solvent using the existing UK bench-scale CO 2 capture unit; 3) quantify the energy consumption savings associated with enhanced mass transfer; 4) quantify the benefits of the UK’s electrochemical cell to decompose nitrosamines; and 5) collect the necessary information/data to conduct a high-level TEA assessment of the proposed technologies. The project involved the fabrication and installation of customized dynamic polarity packing and an investigation into the understanding of the impact of chemical additives on solvent properties to increase CO 2 mass transfer in the absorber column, and lastly the design of an electrochemical cell to decompose nitrosamines in a water wash. After both systems were fabricated, they were tested at UK facilities, including on the bench-scale CO 2 capture unit under parametric and long-term operation.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Sodar - NREL Scintex SFAS Wind Profiler, Condon - Raw Data

The dataset includes 15-minute average wind speed and direction records from 10 m to 250 m above ground level (AGL) in 5-m range gates. Data were collected by a Scintec SFAS wind profiler installed at the Condon State Airport in Oregon, about 1.8 km northeast of the center of Condon, Ore., and are intended for validating WFIP2 model improvements.

17 WIND ENERGY↗
DOE OSTI2023

Sodar - NREL Scintec MFAS Wind Profiler, Decker Ranch Airstrip - Raw Data

The dataset includes 15-minute average wind speed and direction records from 30 m to 330 m above ground level (AGL) in 10-m range gates. Data were collected by a Scintec MFAS wind profiler installed at the Decker Ranch in Oregon, about 4.4 km southeast of Kent, Ore., and are intended for validating WFIP2 model improvements.

17 WIND ENERGY↗
DOE OSTI2023

Sodar - NREL Scintec MFAS Wind Profiler, Decker Ranch Airstrip - Reviewed Data

The dataset includes 15-minute average wind speed and direction records from 30 m to 330 m above ground level (AGL) in 10-m range gates. Data were collected by a Scintec MFAS wind profiler installed at the Decker Ranch in Oregon, about 4.4 km southeast of Kent, Ore., and are intended for validating WFIP2 model improvements.

17 WIND ENERGY↗
DOE OSTI2023

Sodar - NREL Scintex SFAS Wind Profiler, Condon - Reviewed Data

The dataset includes 15-minute average wind speed and direction records from 10 m to 250 m above ground level (AGL) in 5-m range gates. Data were collected by a Scintec SFAS wind profiler installed at the Condon State Airport in Oregon, about 1.8 km northeast of the center of Condon, Ore., and are intended for validating WFIP2 model improvements.

17 WIND ENERGY↗
DOE OSTI2021

SPRUCE Warming Promotes the Use of Organic Matter as an Electron Acceptor in a Peatland: Supporting Data

These data are provided in support of the publication: Warming Promotes the Use of Organic Matter as an Electron Acceptor in a Peatland (Rush et al., 2021). Rush et al. (2021) reported on the effect of temperature on microbial organic matter reduction at the SPRUCE study site and S1 bog. Specifically, electron shuttling capacity (ESC), CH4 production, CO2 production, and acetate concentration were measured to explore both direct and indirect (through changes in soil quality and water-table level) effects of warming on microbial activity. Samples were collected in the summer of 2016 and 2017 depending on the experiment. This dataset contains five files in comma separated (*.csv) format. The SPRUCE Experiment Site is located in a Picea mariana [black spruce] Sphagnum spp. bog forest in northern Minnesota, 40 km north of Grand Rapids, in the USDA Forest Service Marcell Experimental Forest (MEF). This ecosystem, which is located at the southern margin of the boreal forest, is considered especially vulnerable to climate change and anticipated to be near its tipping point.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Powering the Woods Hole X-Spar Buoy with Ocean Wave Energy—A Control Co-Design Feasibility Study

Despite its success in measuring air–sea exchange, the Woods Hole Oceanographic Institution’s (WHOI) X-Spar Buoy faces operational limitations due to energy constraints, motivating the integration of an energy harvesting apparatus to improve its deployment duration and capabilities. This work explores the feasibility of an augmented, self-powered system in two parts. Part 1 presents the collaborative design between X-Spar developers and wave energy researchers translating user needs into specific functional requirements. Based on requirements like desired power levels, deployability, survivability, and minimal interference with environmental data collection, unsuitable concepts are pre-eliminated from further feasibility study consideration. In part 2, we focus on one of the promising concepts: an internal rigid body wave energy converter. We apply control co-design methods to consider commercial of the shelf hardware components in the dynamic models and investigate the concept’s power conversion capabilities using linear 2-port wave-to-wire models with concurrently optimized control algorithms that are distinct for every considered hardware configuration. During this feasibility study we utilize two different control algorithms, the numerically optimal (but acausal) benchmark and the optimized damping feedback. We assess the sensitivity of average power to variations in drive-train friction, a parameter with high uncertainty, and analyze stroke limitations to ensure operational constraints are met. Our results indicate that a well-designed power take-off (PTO) system could significantly extend the WEC-Spar’s mission by providing additional electrical power without compromising data quality.

autonomous systems↗
DOE OSTI2025

Snow ALbedo eVOlution (SALVO) Campaign Spectral Albedo and Related Measurements from April - June, 2024 in Utqiagivk, AK

A field-portable spectroradiometer, referred to herein as an ‘ASD’, was used to make spatially-distributed spectral albedo (350 – 2500 nm) measurements on tundra and sea ice surfaces. The ASD detector is carried in a backpack and controlled via a computer mounted on the front of the operator (see Figure 1). The ASD measures the spectral irradiance from a fiber optic cable that is routed from the backpack to a custom, gooseneck cosine collector mounted on the end of a 1-m long boom (Grenfell and Perovich, 2008). The boom was held at hip height (approximately 1 m) and had an integrated bubble level for levelling. To make an albedo measurement, first the operator collect an incident (down-welling) irradiance, followed by a reflected (up-welling) measurement. The time between incident and reflected measurements was typically between 11 and 26 seconds (interquartile range). For each measurement, 10 spectra are averaged together. Albedo is calculated as the ratio of the reflected to incident measurement, which obviates the need for absolute radiometric calibration. Albedo measurements were taken parallel to the 200-m albedo lines at 5-m increments (41 measurements) ~1 m south of the line. While the ASD operator was making measurements, an assistant kept notes on the scan number associated with each measurement, the surface type (see below), and collected photos of each measurement (see companion oblique photos data archive). Measurements were made within 3 hours of solar noon.

ASD Spectroradiometer↗
NASA NTRS1974

Use of remote sensing technology for inventorying and planning utilization of land resources in South Dakota

A comprehensive land use planning process model is being developed in Meade County, South Dakota, using remote sensing technology. The proper role of remote sensing in the land use planning process is being determined by interaction of remote sensing specialists with local land use planners. The data that were collected by remote sensing techniques are as follows: (1) level I land use data interpreted at a scale of 1:250,000 from false color enlargement prints of ERTS-1 color composite transparencies; (2) detailed land use data interpreted at a scale of 1:24,000 from enlargement color prints of high altitude RB-57 photography; and (3) general soils map interpreted at a scale of 1:250,000 from false color enlargement prints of ERTS-1 color composite transparencies. In addition to use of imagery as an interpretation aid, the utility of using photographs as base maps was demonstrated.

Source record↗
NASA NTRS1982

Partial discharge testing under direct voltage conditions

DC partial discharge (PD) (corona) testing is performed using a multichannel analyzer for pulse storing, and data is collected during increase of voltage and at quiescent voltage levels. Thus high voltage ceramic disk capacitors were evaluated by obtaining PD data interspersed during an accelerated life test. Increased PD activity was found early in samples that later failed catastrophically. By this technique, trends of insulation behavior are revealed sensitively and nondestructively in high voltage dc components.

Bever, R. S.↗
NASA NTRS1984

Magnetic flare model of gamma-ray bursts

The thermal synchrotron (TS) interpretation of gamma-ray burst continuum spectra requires an emission region which is hot, optically thin, and possessed of a super-Eddington flux of 10 to the 30 ergs/sq cm per sec for a 10-km neutron star. In order to maintain a pair population close to the Maxwellian, the collision excitation rate into higher Landau levels must exceed the cyclotron decay rates. Even if collective processes whose rates are close to the electron plasma frequency, or scattering by heavy ions, are invoked, a particle density of 10 to the 25th/cu cm is still needed. Both hypotheses point in the direction of a dense but thin emitting sheet, to whose structure attention is presently given together with the generation, propagation and coupling of the electromagnetic energy fluxes. A flare-like model can account for most of gamma ray bursts' general features.

Liang, E. P.↗