Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffuser Flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Decoupling of redox processes from soil saturation in Arctic tundra

Permafrost thaw in warming Arctic landscapes alters hydrology and saturation-driven biogeochemical processes. Models assume that aerobic respiration occurs in drained soils while saturated soils support methanogenesis; however, saturated soils maintain redox gradients that host a range of anaerobic metabolisms. We evaluated how redox potential and redox-active solutes vary with soil moisture in the active layer of permafrost-affected acidic and non-acidic tundra hillslopes. Oxidizing conditions persisted in highly permeable organic horizons of both unsaturated tussock tundra and saturated wet sedge meadows. Redox potential decreased with depth in all soils as increasing soil bulk density restricted groundwater flow and oxygen diffusion. High concentrations of dissolved iron, phosphate, and organic carbon coincided with redox boundaries below the soil surface in acidic tundra, indicating active iron redox cycling and potential release of adsorbed phosphate during iron (oxyhydr)oxide dissolution. In non-acidic tundra, weatherable minerals affected nutrient dynamics more than redox-driven iron cycling, especially in low-lying, saturated areas where thaw reached mineral soils. The role of thaw depth and the ability of saturated soils to maintain oxidizing conditions in organic surface layers highlight the importance of soil physical properties and hydrology in predicting biogeochemical processes and greenhouse gas emissions.

54 ENVIRONMENTAL SCIENCES↗

Effect of elasticity of wall on diffusion in nano channel

Confining walls of nano channel are taken to be elastic to study their effect on the diffusion coefficient of fluid flowing through the channel. The wall is elastic to the extent that it responses to molecular pressure exerted by fluid. The model to study diffusion is based on microscopic considerations. Results obtained for fluid confining to 20 atomic diameter width contrasted with results obtained by considering rigid and smooth wall. The effect of roughness of wall on diffusion can be compensated by the elastic property of wall.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Eutectic structures in friction spot welding joint of aluminum alloy to copper

A dissimilar joint of AA5083 Al alloy and copper was produced by friction spot welding. The Al-MgCuAl{sub 2} eutectic in both coupled and divorced manners were found in the weld. At a relatively high temperature, mass transport of Cu due to plastic deformation, material flow, and atomic diffusion, combined with the alloy system of AA5083 are responsible for the ternary eutectic melting.

36 MATERIALS SCIENCE↗

Enhanced electrochemical etching of ion irradiated silicon by localized amorphization

A tailored distribution of ion induced defects in p-type silicon allows subsequent electrochemical anodization to be modified in various ways. Here we describe how a low level of lattice amorphization induced by ion irradiation influences anodization. First, it superposes a chemical etching effect, which is observable at high fluences as a reduced height of a micromachined component. Second, at lower fluences, it greatly enhances electrochemical anodization by allowing a hole diffusion current to flow to the exposed surface. We present an anodization model, which explains all observed effects produced by light ions such as helium and heavy ions such as cesium over a wide range of fluences and irradiation geometries.

36 MATERIALS SCIENCE↗

Effects beyond ideal MHD on stability of wide and enhanced pedestal regimes in NSTX

Stability of edge-localized modes (ELMs) in spherical tokamaks is explored using the extended MHD model. Linear NIMROD simulations have been performed for three NSTX discharges 132543, 132588, and 141133, to investigate the role of resistivity, diffusivity, and shear flows on the onset of ELMs. The first discharge represents the wide pedestal regime and the later two discharges represent ELM-free enhanced pedestal H-mode. We first present the effect of toroidal rotation shear and find a flow shear destabilizing effect in these NSTX discharges. Simulations are also extended to include the two-fluid and ion gyroviscosity effects. Simulations show that the flow shear can shift the mode spectrum and alter the critical condition of ELM onset. We also uncover that ELM onset prediction in spherical tokamaks requires effects beyond MHD, in particular gyroviscosity and diamagnetic terms could stabilize Peeling-Ballooning modes consistent with the experimental observation of ELM-free regimes in NSTX. The findings give new insight into the nature of the interplay between resistivity, flows, and diamagnetic stabilization in ELM suppression and have potential applications to ELM control schemes in NSTX-U and next-generation spherical tokamaks. This study identifies the essential physical effects that must be included in future predictive and validation simulations.

NSTX↗

Dispersive transport and symmetry of the dispersion tensor in porous media

The macroscopic laws controlling the advection and diffusion of solute at the scale of the porous continuum are derived in a general manner that does not place limitations on the geometry and time evolution of the pore space. Special focus is given to the definition and symmetry of the dispersion tensor that is controlling how a solute plume spreads out. Here, we show that the dispersion tensor is not symmetric and that the asymmetry derives from the advective derivative in the pore-scale advection-diffusion equation. When flow is spatially variable across a voxel, such as in the presence of a permeability gradient, the amount of asymmetry can be large. As first shown by Auriault [J.-L. Auriault Transp. Porous Med. 85, 771 (2010)TPMEEI0169-391310.1007/s11242-010-9591-y] in the limit of low Péclet number, we show that at any Péclet number, the dispersion tensor D ij satisfies the flow-reversal symmetry D ij (+q)=D ji (-q) where q is the mean flow in the voxel under analysis; however, Reynold's number must be sufficiently small that the flow is reversible when the force driving the flow changes sign. We also demonstrate these symmetries using lattice-Boltzmann simulations and discuss some subtle aspects of how to measure the dispersion tensor numerically. Particularly, the numerical experiments demonstrate that the off-diagonal components of the dispersion tensor are antisymmetric which is consistent with the analytical dependence on the average flow gradients that we propose for these off-diagonal components.

36 MATERIALS SCIENCE↗

The Alamo multiphysics solver for phase field simulations with strong-form mechanics and block structured adaptive mesh refinement

Alamo is a high-performance scientific code that uses block-structured adaptive mesh refinement to solve such problems as: the ignition and burn of solid rocket propellant, plasticity, damage and fracture in materials undergoing loading, and the interaction of compressible flow with eroding solid materials. Alamo is powered by AMReX, and provides a set of unique methods, models, and algorithms that enable it to solve solid-mechanics problems (coupled to other physical behavior such as fluid flow or thermal diffusion) using the power of block-structured adaptive mesh refinement.

36 MATERIALS SCIENCE↗

Modeling Mesoscale Processes of Scalable Synthesis (Final Report)

The main objective of the center is to develop tools that can help for the understanding of equilibrium and non-equilibrium properties of nanoparticles in aqueous electrolytes. To achieve this goal, we need to develop new computational methodologies that can integrate molecular level description such as the electronic structure analysis to mesoscale description such as generalized hydrodynamics. The challenge is to develop systematic coarse graining techniques that can adaptively choose the level of description needed for the particular task. For example, if bonding breaking is involved, then one should use appropriate models from quantum mechanics to accurately model the time scale and molecular mechanism for the breaking process. However, to model transport process or the process of self-assembly, much less detailed models can be used. There are two main components to this task. One is to develop accurate models that bridge different levels of description. The classical example is the QM/MM model that bridges quantum mechanics and molecular mechanics for studying chemical reactions of large molecules. This work was awarded the Nobel prize this year. For our purpose, we also need to develop methods that bridge molecular and continuum levels of description. Another main task is to develop systematic coarse-graining methods that can give rise to accurate mesoscale and macroscale models, starting from more detailed models at the atomic or molecular scale. None of these ideas are new. By now they have been fashionable topics for quite some time. But neither problem is satisfactorily resolved. The main problem is that uncontrolled approximations are used. As a result, we have very little idea about the validity and accuracy of these models. The main purpose of the center is to exploit the Mori-Zwanzig formalism to achieve the goals stated above. The Mori-Zwanzig formalism is a general tool for eliminating degrees of freedom from existing models. What is attractive about this formalism is its generality. The flip side is that it is also somewhat of a tautology. In order to make it a practical tool, one has to make approximations and this is where the trouble comes. Instead of focusing on Mori-Zwanzig formalism, the PI proposes to study the closely related renormalization group formalism (RG). Like Mori-Zwanzig, RG is a general strategy for eliminating small scale degrees of freedom in a model. Unlike Mori-Zwanzig, RG has the advantage that at least for some problems, one can write a PDE (partial differential equation) type of model for the exact RG flow, without any approximation. This gives us a solid starting point for discussing and analyzing approximations. The PI studied approximate RG flows for turbulent diffusion and related problems. However, extending it to more practical problems proved to be hard. The second line that the PI has pursued is to develop special numerical algorithms for studying particularly important events for dynamics processes in meso-scale systems. The PI succeeded in doing so for the problem of understanding phase transition in metallic systems.

97 MATHEMATICS AND COMPUTING↗

Multi-physics Preconditioning for Thermally Activated Batteries

Thermal batteries, also known as molten-salt batteries, are single-use reserve power systems activated by pyrotechnic heat generation, which transitions the solid electrolyte into a molten state. The simulation of these batteries relies on multiphysics modeling to evaluate performance and behavior under various conditions. This paper presents advancements in scalable preconditioning strategies for the Thermally Activated Battery Simulator (TABS) tool, enabling efficient solutions to the coupled electrochemical systems that dominate computational costs in thermal battery simulations. We propose a hierarchical block Gauss-Seidel preconditioner implemented through the Teko package in Trilinos, which effectively addresses the challenges posed by tightly coupled physics, including charge transport, porous flow, and species diffusion. The preconditioner leverages scalable subblock solvers, including smoothed aggregation algebraic multigrid (SA-AMG) methods and domain-decomposition techniques, to achieve robust convergence and parallel scalability. Strong and weak scaling studies demonstrate the solver’s ability to handle problem sizes up to 51.3 million degrees of freedom on 2048 processors, achieving near sub-second setup and solve times for the end-to-end electrochemical solve. These advancements significantly improve the computational efficiency and turnaround time of thermal battery simulations, paving the way for higher-resolution models and enabling the transition from 2D axisymmetric to full 3D simulations.

25 ENERGY STORAGE↗

Tolerance of Mach 2.50 axisymmetric mixed-compression inlets to upstream flow variations

An investigation of the tolerances of two Mach 2.50 axisymmetric mixed-compression inlets to upstream flow variations was conducted. Tolerances of each inlet to angle of attack as a function of decreasing free-stream Mach number were obtained. A local region of overcompression was formed on the leeward side of the inlet at maximum angle of attack before unstart. This region of overcompression corresponded to local subsonic flow conditions ahead of the geometric throat. A uniform Mach number gradient of 0.10 at the cowl lip plane did not affect the inlet's pressure recovery, mass flow ratio, or diffuser exit total-pressure distortion.

Choby, D. A.↗

The chemistry of neutral species in the D and E regions.

The photodissociation of molecular species such as oxygen, nitrogen, and water vapor in the upper atmosphere leads to the formation of a reservoir of chemical energy consisting of highly reactive atomic gases. The reactions of these with each other, and with the rest of the atmosphere, give a complex neutral chemistry involving many species and reactions. Local equilibrium can rarely be assumed for these reactions; transport by the horizontal and vertical mean flow, by eddy diffusion, and by molecular diffusion has quite different effects on the various constituents, depending on the time constants. The entire subject of the neutral chemistry in the D and E regions (between 50 and 160 km altitude) is reviewed, and related to existing experimental results. Needs for further research on the subject are indicated.

Bowhill, S. A.↗

Scale dependence of the 200-mb divergence inferred from EOLE data.

The EOLE experiment with 480 constant-volume balloons distributed over the Southern Hemisphere approximately at the 200-mb level, has provided a unique, highly accurate set of tracer trajectories in the general westerly circulation. The trajectories of neighboring balloons are analyzed to estimate the horizontal divergence from the Lagrangian derivative of the area of one cluster. The variance of the divergence estimates results from two almost comparable effects: the true divergence of the horizontal flow and eddy diffusion due to small-scale, two-dimensional turbulence. Taking this into account, the rms divergence is found to be of the order of 0.00001 per sec and decreases logarithmically with cluster size. This scale dependence is shown to be consistent with the quasi-geostrophic turbulence model of the general circulation in midlatitudes.

Morel, P.↗

On the structure of contact binaries. I - The contact discontinuity

The problem of the interior structure of contact binaries is reviewed, and a simple resolution of the difficulties which plague the theory is suggested. It is proposed that contact binaries contain a contact discontinuity between the lower surface of the common envelope and the Roche lobe of the cooler star. This discontinuity is maintained against thermal diffusion by fluid flow, and the transition layer is thin to the extent that the dynamical time scale is short in comparison with the thermal time scale. The idealization that the transition layer has infinitesimal thickness allows a simple formulation of the structure equations which are closed by appropriate jump conditions across the discontinuity. The further imposition of the standard boundary conditions suffices to define a unique model for the system once the chemical composition, the masses of the two stars, and the orbital separation are specified.

Shu, F. H.↗

A comparative study of tropospheric ground cloud diffusion models

Calculated values obtained from several diffusion models are compared with field measurements. The diffusion models that are examined include: NASA/MSFC multilayer diffusion models, the meteorological effluent transport simulation model, the TREATS model, the atmsopheric diffusion particle in cell model, and a model for diffusion in shear flow (DISF). The atmospheric turbulence in the PBL turbulent wind field above and below 150 m is calculated. Concentrations calculated from the DISF model are found to correlate, in general, quite well with flight measurements.

Hwang, B.↗

Scale model studies for improvement of flow patterns of a low-speed tunnel

Flow along a nacelle was investigated with and without an orifice plate inserted into the airstream. The flow became more uniform in transit through the orifice when compared with the upstream flow and remained more uniform immediately downstream from the orifice. No improvement was found farther downstream with or without the orifice plate. Various windmills were studied to determine their effects on the downstream flow pattern. The windmill retarded flow velocity inside the circle inscribed by the tip of free wheeling propellers (used as substitute windmills), while the main stream passed over the blades seemingly unrestricted and without showing any increase in diameter. Results show that by varying a torque, the flow across a windmill can be effectively redistributed, an effect that could be gainfully employed in situations where the main flow into a diffuser is concentrated near the center. The construction of the 1/24 scale model tunnel and the velocity transverses obtained on the model are discussed. The transverses indicate that the velocity distribution may be considered worse in the vertical than in the horizontal plane.

Barna, P. S.↗

Vacuum applications of metal foams

Several vacuum applications of copper foams in the density range 2-5% and pore sizes of 0.5-0.7 mm are discussed, such as a foreline hydrocarbon trap in a mechanical vacuum pump, a molecular-flow resistor, a diffuser, and a water injector. Other suggested applications include the use of foam copper in the form of an externally heated plug to remove traces of oxygen from inert gases bled into a vacuum system through a stainless steel line and the use of the porous surface for minimizing release of secondary electrons from electrodes in the path of charged particle beams.

Kendall, B. R. F.↗