Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELASTIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Plasma enhanced chemical vapor deposition of wear resistant gradual a-Si{sub 1-x}:C{sub x}:H coatings on nickel-titanium for biomedical applications

Plasma enhanced chemical vapor deposition has been used to deposit thin films with gradual transitions from silicon to carbon on Cu, Ni, stainless steel, and NiTi. Thus show low stress, elasticity, and wear resistance with excellent adhesion on all metals under investigation. Already at low Si concentrations of 10 at. % the intrinsic stress is considerably reduced compared to pure diamondlike carbon (DLC) films. The deposition process is controlled by optical emission spectroscopy. This technique has been applied to monitor the growth precursors and to correlate them with the film composition. The compositions of the films were determined by Rutherford backscattering spectroscopy and XPS measurements. Due to the elastic properties of the gradual transition and the excellent biocompatibility of DLC, the described film systems present a useful coating for biomedical applications.

36 MATERIALS SCIENCE↗

The 650 °C Tensile Deformation of Graded IN718-René41 Superalloy Fabricated by Laser Blown-Powder Directed Energy Deposition

The microstructure and 650 °C tensile properties of a compositionally graded IN718-René41 (718-R41) superalloy fabricated by laser blown-powder directed energy deposition (DED-LB/M) are investigated to understand structure–property relationships and baseline tensile properties. Digital Image Correlation (DIC), in situ neutron diffraction, and conventional characterization techniques are performed to study the as-built and heat-treated states. The applied heat treatment generates static recrystallization and equiaxed grains in 718-rich compositions, while R41-rich compositions remain partially or un-recrystallized possibly influenced by a higher MC carbide fraction (>0.5%). The yield strengths of the 718 and R41 sections in the heat-treated state are comparable to wrought forms but the graded compositions show weakness due to unoptimized heat treatment. Diffraction elastic constants first decrease and then increase along the 718-R41 composition gradient, while a small difference is observed between the as-built and heat-treated states and γ, γ′ phases. Overall, the compositionally graded region shows a smooth transition in the elastic properties. Grain-level load transfer from the (220) to (200) grains shows compositional dependence, and qualitatively agrees with DIC-measured macroscopic yield strength. Within the (200) grains, the γ/γ′ phases deform elastically until the γ phase yields and afterwards, the γ′ phase takes load from the γ phase.

Huang, Shenyan (ORCID:0000000196528114)↗

Effect of Oxygen Nonstoichiometry on the Magnetic Phase Transitions in Frustrated YBaCo{sub 4}O{sub 7+ x} (x = 0, 0.1, 0.2) Cobaltites

The structural and elastic characteristics of YBaCo{sub 4}O{sub 7+ x} (x = 0, 0.1, 0.2) cobaltites synthesized by various technologies and having various excess oxygen contents x are experimentally studied. The distortion of the crystal structure in stoichiometric samples is found to remove frustrations and to bring about a longrange magnetic order in the cobalt subsystem, which is accompanied by well-pronounced anomalies in the elastic properties in the temperature range of a magnetic phase transition T{sub N}. At a weak deviation from oxygen stoichiometry, the structure distortion disappears, frustrations are retained, and the further development of a long-range magnetic order is hindered. As a result of an absent long-range magnetic order, the anomalies of the elastic characteristics at T{sub N} smooth rapidly and disappear. This finding points to the suppression of structural and magnetic transitions in nonstoichiometric samples and to the conservation of only short-range correlations of order parameter. It is found that nonstoichiometric samples can be separated into two phases depending on the ceramic synthesis conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear softening of unconsolidated granular earth materials

Unconsolidated granular earth materials exhibit softening behavior due to external perturbations such as seismic waves, namely, the wave speed and elastic modulus decrease upon increasing the strain amplitude above dynamics strains of about 10 -6 under near-surface conditions. In this letter, we describe a theoretical model for such behavior. The model is based on the idea that shear transformation zones—clusters of grains that are loose and susceptible to contact changes, particle displacement, and rearrangement—are responsible for plastic deformation and softening of the material. We apply the theory to experiments on simulated fault gouge composed of glass beads and demonstrate that the theory predicts nonlinear resonance shifts, reduction of the P wave modulus, and attenuation, in agreement with experiments. The theory thus offers insights on the nature of nonlinear elastic properties of a granular medium and potentially into phenomena such as triggering on earthquake faults.

58 GEOSCIENCES↗

An Approximate Formulation of the Effective Indentation Modulus of Elastically Anisotropic Film-on-Substrate Systems

Frictionless contact between an arbitrarily-shaped rigid indenter and an elastically anisotropic film-on-substrate system can be regarded as being superposed incrementally by a flat-ended punch contact, the shape and size of which are determined by the indenter shape, indentation depth (or applied load) and elastic properties of film and substrate. For typical nanoindentation applications, the indentation modulus can thus be approximated from the response of a circular contact with pressure of the form of [1 - (r/a){sup 2}]{sup -1/2}, where r is the radial coordinate and a is the contact radius. The surface-displacement Green's function for elastically anisotropic film-on-substrate system is derived in closed-form by using the Stroh formalism and the two-dimensional Fourier transform. The predicted dependence of the effective modulus on the ratio of film thickness to contact radius agrees well with detailed finite element simulations. Implications in evaluating film modulus by nanoindentation technique are also discussed.

36 MATERIALS SCIENCE↗

The Ideal Strengths of Superconducting MgCNi{sub 3} and CdCNi{sub 3}

The stress-strain curves under tensile deformation in the 〈100〉, 〈110〉, and 〈111〉 directions and under shear deformation in the (001)〈110〉, (110)〈1̄10〉, (111)〈11̄0〉, and (111)〈112̄〉 slip systems have been systematically calculated by first-principles method to study the ideal strengths of superconducting MgCNi{sub 3} and CdCNi{sub 3}. The ideal strengths in the three tensile directions are found to be reduced in the order of 〈100〉 → 〈110〉 → 〈111〉 and those for the four shear slip systems in the order of (110)〈1̄10〉→(111)〈112̄〉→(111)〈11̄0〉→(001)〈110〉 for both superconductors. Their lowest ideal tensile strengths are found to be larger than the corresponding highest ideal shear strengths, which could explain why both superconductors have the ductility. The obtained lattice constants and elastic properties coincide well with the the available experimental and theoretical values.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Computational design and performance prediction of creep-resistant ferritic superalloys

Ferritic superalloys containing the B2 phase with the parent L21 phase precipitates in a disordered solid-solution matrix, also known as a hierarchical-precipitate-strengthened ferritic alloy (HPSFA), had been developed for high-temperature structural applications in fossil-energy power plants. These alloys were designed by adding Ti into a previously-studied NiAl-strengthened ferritic alloy (denoted as FBB8 in this study). Following with the concept of HPSFAs, in the present research, a systematic investigation on adding other elements, such as Hf and Zr, and optimizing the Ti content within the alloy system, has been conducted, in order to further improve the creep resistance of the model alloys. Studies include advanced experimental techniques, first-principles calculations on thermodynamic and mechanical properties, and numerical simulations on precipitation hardening, have been integrated and conducted to characterize the complex microstructures and excellent creep resistance of alloys. The experimental techniques include transmission-electron microscopy (TEM), scanning-electron microscopy (SEM), neutron diffraction (ND), and atom-probe tomography (APT), which provide the detailed microstructural information of the model alloys. Systematic tension/compression creep tests have also been conducted in order to verify the creep resistance of the potential alloy compositions. The results show that when replacing Ti with Hf and Zr, it does not form the L21 phase. Instead, the hexagonal Laves phase forms and distributes majorly along the grain boundary, or large segregation within grains. Since the Laves phase does not form parent to the B2-phase precipitates, it cannot bring the strengthening effect of HPSFAs. As a result, the FBB8 + 2 wt. % Hf and FBB8 + 2 wt. % Zr alloys have similar mechanical properties to the original FBB8. The FBB8 + Ti series alloys had also been studied, from the creep tests and microstructural characterizations, the FBB8 + 3.5 wt.% Ti possesses the greatest creep resistance, with the L21/B2 phase ratio of 4 (80% of the precipitates is the L21 phase, and 20% is the B2 phase). First-principles calculations include thermodynamics, elastic properties, and interfacial properties, which have been conducted for the understanding of the thermodynamic and mechanical properties of HPSFAs. In addition to the systematic experimental approach and first-principles calculations, a series of numerical tools and algorithms, which assist in the optimization of creep properties of ferritic superalloys, are utilized and developed. These numerical simulation results are compared with the available experimental data and previous first-principles calculations, providing the deep insight of creep mechanisms of the creep-resistant ferritic superalloys. To conclude the present research, we’ve found that (1) only FBB8 + Ti alloys have the potential of forming HPSFA, and FBB8 + Hf and FBB8 + Zr do not work. Therefore, only FBB8 + Ti alloys have desirable creep resistance, (2) the optimum composition for the FBB8 + Ti alloys is FBB8 + 3.5% Ti, which has the greatest creep resistance (218.8 MPa as the threshold stress at 700 oC), (3) first-principle calculations obtained results that could not be obtained in experiments, which are relevant to develop ferritic superalloys with the improved creep resistance, and (4) two-dimensional dislocation-dynamics simulations investigate effects of factors like precipitate volume fractions and precipitate radii in the alloy systems, which helps in developing the most desirable microstructure with greatest strengthening.

20 FOSSIL-FUELED POWER PLANTS↗

Binary, ternary and quaternary silicates of CaO, BaO and ZnO in high thermal expansion seals for solid oxide fuel cells studied by high-temperature X-ray diffraction (HT-XRD)

Highlights: Black-Right-Pointing-Pointer We examined the thermal expansion of various silicates of CaO, BaO and ZnO. Black-Right-Pointing-Pointer Thermal expansions were determined by dilatometry and high-temperature X-ray diffraction. Black-Right-Pointing-Pointer High-temperature X-ray diffraction enabled to determine anisotropic thermal expansion. Black-Right-Pointing-Pointer CaSiO{sub 3}, Ca{sub 3}Si{sub 2}O{sub 7} and BaCa{sub 2}Si{sub 3}O{sub 9} exhibit the highest thermal expansion. Black-Right-Pointing-Pointer CaSiO{sub 3}, Ca{sub 3}Si{sub 2}O{sub 7} and BaCa{sub 2}Si{sub 3}O{sub 9} are suitable as components in high temperature seals. -- Abstract: Gas-tight seals based on glasses suitable for joining of materials with high thermal expansion coefficients are for example required for solid-oxide fuel cells. If these seals are to be used at high temperatures, they can only be fabricated from glasses which enable the crystallization of phases with high thermal expansion coefficients. This paper reports on some components from systems suitable for high thermal expansion seals: binary calcium silicates, CaSiO{sub 3}, Ca{sub 3}Si{sub 2}O{sub 7} and Ca{sub 2}SiO{sub 4} zinc silicates, Zn{sub 2}SiO{sub 4}, ternary silicates of BaO, CaO and ZnO, BaCa{sub 2}Si{sub 3}O{sub 9}, Ca{sub 2}ZnSi{sub 2}O{sub 7}, and one quaternary silicate, Ba{sub 2}CaZn{sub 2}Si{sub 6}O{sub 17,} studied by high-temperature X-ray diffraction. Only CaSiO{sub 3}, Ca{sub 3}Si{sub 2}O{sub 7} and BaCa{sub 2}Si{sub 3}O{sub 9} exhibit thermal expansion coefficients in the range suitable for high thermal expansion seals of 11.2-11.8 Multiplication-Sign 10{sup -6} K{sup -1} (100-800 Degree-Sign C). The thermal expansions strongly depend on the respective crystallographic axis. The coefficient of thermal expansion of a sealing glass is not only affected by the thermal expansions of the crystalline phases, but also by that of the residual glassy phase as well as by the elastic properties. The phase formation should carefully be controlled also with respect to aging.

36 MATERIALS SCIENCE↗

Surface acoustic wave velocity of gold films deposited on silicon substrates at different temperatures

Au thin films have been deposited by DC magnetron sputtering on Si (001) substrates at different substrate temperatures, ranging from 200 K to 450 K. With increasing temperature, the expected crystallinity and morphology of the Au thin film are clearly improved, as shown by x ray diffraction, atomic force microscopy and scanning electron microscopy experiments. Parallel to this, the surface acoustic wave propagation velocity shows a clear enhancement toward the ideal values obtained from numerical simulations of a Au thin film on Si (001) substrate. Moreover, a very thin and slightly rough interlayer between the Si (001) substrate and the Au thin film is developed for temperatures above 350 K. The composition and nature of this interlayer is not known. This interlayer may be responsible for the steep change in the structural and elastic properties of the Au thin films at the higher temperatures and possibly also for an improvement of the adhesion properties of the Au on the Si (001) substrate.

36 MATERIALS SCIENCE↗

Negligible substrate clamping effect on piezoelectric response in (111)-epitaxial tetragonal Pb(Zr, Ti)O{sub 3} films

The converse piezoelectric responses of (111)- and (001)-epitaxial tetragonal Pb(Zr{sub 0.35}Ti{sub 0.65})O{sub 3} [PZT] films were compared to investigate the orientation dependence of the substrate clamping effect. Synchrotron X-ray diffraction (XRD) and piezoelectric force microscopy revealed that the as-grown (111)-PZT film has a polydomain structure with normal twin boundaries that are changed by the poling process to inclined boundaries, as predicted by Romanov et al. [Phys. Status Solidi A 172, 225 (1999)]. Time-resolved synchrotron XRD under bias voltage showed the negligible impact of substrate clamping on the piezoelectric response in the (111)-PZT film, unlike the case for (001)-PZT film. The origin of the negligible clamping effect in the (111)-PZT film is discussed from the viewpoint of the elastic properties and the compensation of lattice distortion between neighboring domains.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computational modeling of high-entropy alloys: Structures, thermodynamics and elasticity

This study provides a short review on computational modeling on the formation, thermodynamics, and elasticity of single-phase high-entropy alloys (HEAs). Hundreds of predicted single-phase HEAs were re-examined using various empirical thermo-physical parameters. Potential BCC HEAs (CrMoNbTaTiVW, CrMoNbReTaTiVW, and CrFeMoNbReRuTaVW) were suggested based on CALPHAD modeling. The calculated vibrational entropies of mixing are positive for FCC CoCrFeNi, negative for BCC MoNbTaW, and near-zero for HCP CoOsReRu. The total entropies of mixing were observed to trend in descending order: CoCrFeNi > CoOsReRu > MoNbTaW. Calculated lattice parameters agree extremely well with averaged values estimated from the rule of mixtures (ROM) if the same crystal structure is used for the elements and the alloy. The deviation in the calculated elastic properties from ROM for select alloys is small but is susceptible to the choice used for the structures of pure components.

36 MATERIALS SCIENCE↗

The Effect of Nonuniform Temperature Distributions on the Stresses and Distortions of Stiffened-Shell Structures

The structural effects of nonuniform temperature distributions, such as those produced by aerodynamic heating or thermal ice-prevention systems, are discussed and found to be of two types: The introduction of thermal stresses and distortions as a result of restrained thermal expansion and a change in the stresses and distortions produced by the applied loads as a result of the variation of elastic properties of materials with temperature. These effects are illustrated by sample analyses of the stress and distortion distributions of simple box beams and by calculation of the stresses on a typical wing section.

ALUMINUM ALLOYS - ALCOA 75ST6 - ELASTICITY↗

On the brittle nature of rare earth pnictides

The high-pressure structural phase transition and pressure as well temperature induced elastic properties in ReY; (Re = La, Sc, Pr; Y = N, P, As, Sb, Bi) pnictides have been performed using effective interionic interaction potential with emphasis on charge transfer interactions and covalent contribution. Estimated values of phase transition pressure and the volume discontinuity in pressure-volume phase diagram indicate the structural phase transition from NaCl to CsCl structure. From the investigations of elastic constants the pressure (temperature) dependent volume collapse/expansion, second order Cauchy discrepancy, anisotropy, hardness and brittle/ductile nature of rare earth pnictides are computed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Experimental aspects of inelastic x-ray scattering studies on liquids under extreme conditions (P-T).

In this study, collective excitations of liquid indium are studied just above the melting point at different pressures (1.7 GPa, 240 C; 3.0 GPa, 300 C; 4.0 GPa, 360 C). The pressures and temperatures are achieved by the use of an externally heated diamond anvil cell. Clear evidence for the existence of propagating modes is observed from the dynamical structure factor at constant momentum transfer (Q) up to about 18 nm{sup -1}. The reason for the observed high elastic-scattering background is identified, and its effects on the determination of elastic properties such as viscosity are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An ab-initio Investigation: The Physical Properties of ScIr{sub 2} Superconductor

Using ab initio technique the physical properties of ScIr{sub 2} superconductor have been investigated with T{sub c} 1.03 K with a MgCu{sub 2}-type structure. We have carried out the plane-wave pseudopotential approach within the framework of the first-principles density functional theory (DFT) implemented within the CASTEP code. The calculated structural parameters confirm a good agreement with the experimental and other theoretical results. Using the Voigt-Reuss-Hill (VRH) averaging scheme the most important elastic properties including the bulk modulus B, shear modulus G, Young’s modulus E and Poisson’s ratio ν of ScIr{sub 2} are determined. At ambient condition, the values of Cauchy pressure and Pugh’s ratio exhibit ductile nature of ScIr{sub 2}. The electronic and optical properties of ScIr{sub 2} were investigated for the first time. The electronic band structure reveals metallic conductivity and the major contribution comes from Ir-5d states. In the ultraviolet region the reflectivity is high up to 50 eV as evident from the reflectivity spectrum.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Graph neural networks predict energetic and mechanical properties for models of solid solution metal alloy phases

Here, we developed a PyTorch-based architecture called HydraGNN that implements graph convolutional neural networks (GCNNs) to predict the formation energy and the bulk modulus for models of solid solution alloys for various atomic crystal structures and relaxed volumes. We trained the GCNN surrogate model on a dataset for nickel–niobium (NiNb) generated by the embedded atom model (EAM) empirical interatomic potential for demonstration purposes. The dataset was generated by calculating the formation energy and the bulk modulus as a prototypical elastic property for optimized geometries starting from initial body-centered cubic (BCC), face-centered cubic (FCC), and hexagonal compact packed (HCP) crystal structures, with configurations spanning the possible compositional range for each of the three types of initial crystal structures. Numerical results show that the GCNN model effectively predicts both the formation energy and the bulk modulus as function of the optimized crystal structure, relaxed volume, and configurational entropy of the model structures for solid solution alloys.

36 MATERIALS SCIENCE↗

An Assessment of Variability in the Average Tensile Properties of a Melt-Infiltrated SiC/SiC Composite

Woven SiC/SiC Ceramic Matrix Composites (CMCs), manufactured by the slurry-cast, melt-infiltration process are under consideration as combustor liner materials in aircraft gas turbine engines. Tensile properties (elastic modulus, proportional limit strength, in-plane tensile strength and strain to failure) of the CMC, manufactured during two separate time periods (9/99 and 1/01) were determined at 816 and 1024 C by conducting tensile tests on specimens machined from the CMC plates. A total of 24 tensile tests were conducted for each temperature and CMC variant combination. In this study average tensile properties of the two cMC variants were statistically compared to evaluate significant differences, if any, within the CMC's properties.

Kalluri, Sreeramesh↗