Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTRIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Crystal structure and electric properties of the organic–inorganic hybrid: [(CH{sub 2}){sub 6}(NH{sub 3}){sub 2}]ZnCl{sub 4}

The new organic-inorganic hybrid [(CH{sub 2}){sub 6}(NH{sub 3}){sub 2}]ZnCl{sub 4}, M{sub r}=325.406 crystallized in a triclinic, P1¯, a=7.2816 (5) Å, b=10.0996 (7) Å, c=10.0972 (7) Å, α=74.368 (4)°, β=88.046 (4)°, γ=85.974 (3)°, V=713.24 (9) Å{sup 3} and Z=2, D{sub x}=1.486 Mg m{sup −3}. Differential thermal scanning and x-ray powder diffraction, permittivity and ac conductivity indicated three phase transitions. Conduction takes place via correlated barrier hopping. - Graphical abstract: Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controlling polymorphic structures and investigating electric properties of Ca-doped zirconia using solid state ceramic method

Structural study of Zr{sub 1−x}Ca{sub x}O{sub 2−x} samples with x=0.01–0.15 were prepared using solid state ceramic method. X-ray diffraction analysis revealed a mixture of the high temperature phase and the monoclinic one for the samples with x≤0.05. On the other hand, the formation of a single high temperature cubic phase was observed within a concentration range of x=0.06–0.10. At concentrations higher than 0.10 the calcium zirconate phase was observed besides the dominant high temperature one. Rietveld refinement of the single phase data clearly revealed, that substitution of zirconium by calcium increases both the lattice parameters as well as the tetrahedral bond length. Ionic to electronic conductivity ratio enhanced considerably as Ca-doping level ascends. The dielectric constant shows strong temperature dependence at lower frequencies. The dielectric loss factor increases rapidly with the increase in temperature at lower frequencies, while decreases with the increase in frequency at higher temperatures. The ionic conduction is considered as the dominant process at higher temperatures. - Graphical abstract: Forming a high temperature cubic zirconia phase at 1200 °C using ceramic solid state method and aliovalent cation. - Highlights: • Formation the high temperature cubic polymorph of zirconia using Ca-doping. • Solid state ceramic method was used for preparing the cubic Ca-doped zirconia. • Substitution of zirconium by calcium increases the lattice parameters and the bond length. • Ionic to electronic conductivity ratio enhanced considerably as Ca-doping level increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of the microwave oven on structural, morphological and electrical properties of SrBi{sub 4}Ti{sub 4}O{sub 15} thin films grown on Pt/Ti/SiO{sub 2}/Si substrates by a soft chemical method

Thin films of SrBi{sub 4}Ti{sub 4}O{sub 15} (SBTi), a prototype of the Bi-layered-ferroelectric oxide family, were obtained by a soft chemical method and crystallized in a domestic microwave oven. For comparison, films were also crystallized in a conventional method at 700 deg. C for 2 h. Structural and morphological characterization of the SBTi thin films were investigated by X-ray diffraction (XRD) and atomic force microscopy (AFM), respectively. Using platinum coated silicon substrates, the ferroelectric properties of the films were determined. Remanent polarization P{sub r} and a coercive field E{sub c} values of 5.1 {mu}C/cm{sup 2} and 135 kV/cm for the film thermally treated in the microwave oven and 5.4 {mu}C/cm{sup 2} and 85 kV/cm for the film thermally treated in conventional furnace were found. The films thermally treated in the conventional furnace exhibited excellent fatigue-free characteristics up to 10{sup 10} switching cycles indicating that SBTi thin films are a promising material for use in non-volatile memories.

36 MATERIALS SCIENCE↗

Structural and electrical properties of Na{sub 2}Pb{sub 2}Eu{sub 2}W{sub 2}Ti{sub 4}X{sub 4}O{sub 30} (X = Nb, Ta) ferroelectric ceramics

A new group of tungsten bronze family Na{sub 2}Pb{sub 2}Eu{sub 2}W{sub 2}Ti{sub 4}X{sub 4}O{sub 30} (X = Nb, Ta) having all the valence elements (I-VI) were prepared by a high-temperature solid-state reaction technique. The formations of the compounds were confirmed by X-ray diffraction technique with an orthorhombic structure. Surface morphology of the compounds was studied by scanning electron microscope (SEM). Studies of dielectric properties ({epsilon}{sub r} and tan {delta}) of the above compounds at different frequencies in a wide temperature range (300-700 K) with an impedance analyzer exhibit a ferroelectric phase transition at 580 and 394 K for Na{sub 2}Pb{sub 2}Eu{sub 2}W{sub 2}Ti{sub 4}Nb{sub 4}O{sub 30} and Na{sub 2}Pb{sub 2}Eu{sub 2}W{sub 2}Ti{sub 4}Ta{sub 4}O{sub 30}, respectively. Ferroelectric properties of these compounds were confirmed with polarization (hysteresis) study.

36 MATERIALS SCIENCE↗

Electrical properties and thermal expansion of cobalt doped apatite-type lanthanum silicates based electrolytes for IT-SOFC

Graphical abstract: The figure shows the dependence of conductivity on the Co content. It can be seen that La{sub 10}Si{sub 5.2}Co{sub 0.8}O{sub 26.6} exhibits the highest ionic conductivity of 3.33 Multiplication-Sign 10{sup -2} S/cm at 800 Degree-Sign C. When x {<=} 0.8, as doping Co weakens the binding energy and aids the migration of the interstitial oxide ions, the ionic conductivity improves. On the other hand, excess dopant of Co (0.8 < x {<=} 1.5) can decrease the number of interstitial oxide ions and reduce the ionic conductivity. Highlights: Black-Right-Pointing-Pointer The unit volumes of La{sub 10}Si{sub 6-x}Co{sub x}O{sub 27-x/2} increase with increasing cobalt content. Black-Right-Pointing-Pointer Doping Co can increase the thermal expansion because of the larger radius of Co{sup 3+} ion. Black-Right-Pointing-Pointer Conductivities of La{sub 10}Si{sub 6-x}Co{sub x}O{sub 27-x/2} first increase and then decrease with cobalt content. Black-Right-Pointing-Pointer Above 550 Degree-Sign C, La{sub 10}Si{sub 6-x}Co{sub x}O{sub 27-x/2} shows low activation energies of around 0.7 eV. -- Abstract: The thermal expansion and conductivities have been investigated for Co{sup 3+} doped lanthanum silicates. The apatite-type lanthanum silicates with formula La{sub 10}Si{sub 6-x}Co{sub x}O{sub 27-x/2} (x = 0.2, 0.4, 0.6, 0.8, 1.0, 1.5) were synthesized by sol-gel process. The thermal expansion coefficient (TEC) of La{sub 10}Si{sub 6-x}Co{sub x}O{sub 27-x/2} was improved with increasing cobalt content because of the lower valence and larger radius of Co{sup 3+} ion compared to Si{sup 4+}. Analysis of AC impedance spectroscopy showed that conductivity increased first and then decreased with increasing cobalt content. There is an optimum doping amount of cobalt and La{sub 10}Si{sub 5.2}Co{sub 0.8}O{sub 26.6} exhibits the highest conductivity of 3.33 Multiplication-Sign 10{sup -2} S/cm at 800 Degree-Sign C. When x {<=} 0.8, the local distortion caused by doping with Co{sup 3+} can significantly affect the oxygen channels and assist the migration of the interstitial oxide ions, resulting in the improvement of ionic conductivity. However, excess Co{sup 3+} dopant (0.8 < x {<=} 1.5) reduced the number of interstitial oxide ions and decreased the conductivity.

36 MATERIALS SCIENCE↗

Electrical properties of niobium doped barium bismuth-titanate ceramics

Highlights: ► Pure and doped BaBi{sub 4}Ti{sub 4}O{sub 15} were prepared via the solid-state reaction method. ► The grain size was suppressed in Nb-doped samples. ► The diffuseness of the dielectric peak increased with dopant concentration. ► Niobium affected on relaxor behavior of barium bismuth titanate ceramics. ► The conductivity change was noticed in doped samples. -- Abstract: BaBi{sub 4}Ti{sub 4–5/4x}Nb{sub x}O{sub 15} (BBNTx, x = 0, 0.05, 0.15, 0.30) ceramics have been prepared by solid state method. XRD data indicate the formation of single-phase-layered perovskites for all compositions. SEM micrographs suggest that the grain size decreases with Nb doping. The effect of niobium doping on the dielectric and relaxor behavior of BaBi{sub 4}Ti{sub 4}O{sub 15} ceramics was investigated in a wide range of temperatures (20–777 °C) and frequencies (1.21 kHz to 1 MHz). Nb doping influences T{sub c} decrease as well as the decrease of dielectric permittivity at Curie temperature. At room temperature, undoped BaBi{sub 4}Ti{sub 4}O{sub 15} exhibits dielectric constant of ∼204 at 100 kHz, that slightly increases with Nb doping. The conductivity of BBNT5 ceramics is found to be lower than that of other investigated compositions. The value of activation energy of σ{sub DC} was found to be 0.89 eV, 1.01 eV, 0.93 eV and 0.71 eV for BBT, BBNT5, BBNT15 and BBNT30, respectively.

36 MATERIALS SCIENCE↗

Microstructure, magnetic and electric properties of BaTiO{sub 3}–Ni{sub 0.5}Zn{sub 0.5}Fe{sub 1.5}Cr{sub 0.5}O{sub 4} nanocomposite

Highlights: ► BaTiO{sub 3}/Ni{sub 0.5}Zn{sub 0.5}Fe{sub 1.5}Cr{sub 0.5}O{sub 4} nanocomposites were synthesized by the sol–gel method. ► A large induced strain is induced in the composite. ► The ferroelectric phase transition dependence on the amount of ferrite. - Abstract: xBaTiO{sub 3} + (1 − x)Ni{sub 0.5}Zn{sub 0.5}Fe{sub 1.5}Cr{sub 0.5}O{sub 4} (x = 0.35, 0.5, 0.65) nanocomposites were synthesized by the sol–gel method. The two corresponding intended nanocomposites phases were confirmed by X-ray diffraction, no other foreign phases were present. The microstrain of the nanocomposite was found to depend on the ratio amount of BaTiO{sub 3} (BTO) in the nanocomposites. The tetragonality ratio c/a of BTO approximates its values to be (a = c) at concentration of 65% BTO. Magnetic properties showed superparamgnetic behavior at room temperature. The temperature dependent of dielectric constant measurements showed that the Curie temperature (T{sub c}) of the ferroelectric phase transition varies with different composites ratio. The dielectric properties of the composite increased with increase of ferrite content. The compressed stress generated by the lattice mismatch of the in planes at the interface of the ferroelectric and magnetic phases cause large strain. The mediation of this strain causes strong electromagnetic coupling creating new materials with good quality.

36 MATERIALS SCIENCE↗

The effects of lithium doping level on the structural, electrical properties of Li{sup +}-doped BPO{sub 4} solid electrolyte

Graphical abstract: - Highlights: • Better ionic conductivities when 0.05 ≤ x ≤ 0.13. • V{sup ‴}{sub B}+3Li{sub i} model was preferred. • Grain size, lattice strain and Li{sup +}conductivity are closely related. - Abstract: A series of lithium ion conducting solid electrolytes Li{sub x}B{sub 1−x/3}PO{sub 4}(x = 0.01, 0.05, 0.09, 0.13, 0.17, 0.20) is synthesized by a soft-chemistry route. FTIR and XRD measurements reveal that the electrolyte is pure phase of tetragonal structure. AC-impedance spectroscopy (AC-IS) at room temperature shows that Li{sub x}B{sub 1−x/3}PO{sub 4} exhibits higher ionic conductivities in the range 0.05 ≤ x ≤ 0.13, beyond which, the ionic conductivities decrease quickly. Maximum ionic conductivity of the Li{sub x}B{sub 1−x/3}PO{sub 4} reaches 3.35 × 10{sup −5} S cm{sup −1} at room temperature for x = 0.05. Direct current polarizing (DCP) measurement indicates that the decomposition voltage for the solid electrolyte reaches up to 3.7 V. Micro-structure parameters of synthesized Li{sub x}B{sub 1−x/3}PO{sub 4} samples are calculated by Rietveld refinement of X-ray diffraction spectra. The unit-cell parameters, lattice strain, crystal grain size and ionic conductivities of the samples are correlated with the lithium ion doping level x.

36 MATERIALS SCIENCE↗