Search NASA⌕ Search

SEARCH · Search NASA

Results for “ELECTROMAGNETIC INSTRUMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

In-medium {omega} mass from the {gamma}+Nb {yields} {pi}{sup 0{gamma}}+X reaction

Data on the photoproduction of {omega} mesons on nuclei have been reanalyzed in a search for in-medium modifications. The data were taken with the crystal barrel (CB)/two-arm photon spectrometer (TAPS) detector system at the ELectron Stretcher Anlage (ELSA) accelerator facility in Bonn. First results from the analysis of the data set were published by Trnka et al. [Phys. Rev. Lett. 94, 192303 (2005)], claiming a lowering of the {omega} mass in the nuclear medium by 14% at normal nuclear matter density. The extracted {omega} line shape was found to be sensitive to the background subtraction. For this reason a reanalysis of the same data set has been initiated, and a new method has been developed to reduce the background and to determine the shape and absolute magnitude of the background directly from the data. Details of the reanalysis and of the background determination are described. The {omega} signal on the Nb target, extracted in the reanalysis, does not show a deviation from the corresponding line shape on a LH{sub 2} target, measured as reference. The earlier claim of an in-medium mass shift is thus not confirmed. The sensitivity of the {omega} line shape to different in-medium modification scenarios is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nonforward Compton scattering in AdS/CFT correspondence

We study the nonforward Compton scattering, in particular, the deeply virtual Compton scattering from AdS/CFT. We first calculate the contributions from the s-channel and u-channel supergravity diagrams as well as the four-point interaction diagram which correspond to the Compton scatterings on a dilaton target in CFT. Furthermore, we study the Compton scattering on a dilatino target. Assuming that protons can be identified as supergravity modes of the dilatino, we compare the calculated deeply virtual Compton scattering cross section to the low-energy experimental data from the H1 and ZEUS collaborations and find good agreement. We also discuss the t-channel graviton exchange contribution and show that it should be dominant in the high-energy limit.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Detailed balance in Horava-Lifshitz gravity

We study Horava-Lifshitz gravity in the presence of a scalar field. When the detailed balance condition is implemented, a new term in the gravitational sector is added in order to maintain ultraviolet stability. The four-dimensional theory is of a scalar-tensor type with a positive cosmological constant and gravity is nonminimally coupled with the scalar and its gradient terms. The scalar field has a double-well potential and, if required to play the role of the inflation, can produce a scale-invariant spectrum. The total action is rather complicated, and there is no analog of the Einstein frame where Lorentz invariance is recovered in the infrared. For these reasons it may be necessary to abandon detailed balance. We comment on open problems and future directions in anisotropic critical models of gravity.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Implementation of barycentric resampling for continuous wave searches in gravitational wave data

We describe an efficient implementation of a coherent statistic for searches of continuous gravitational wave from neutron stars. The algorithm works by transforming the data taken by a gravitational wave detector from a moving Earth bound frame to one that sits at the Solar System barycenter. Many practical difficulties arise in the implementation of this algorithm, some of which have not been discussed previously. These difficulties include constraints of small computer memory, discreteness of the data, losses due to interpolation, and gaps in real data. This implementation is considerably more efficient than previous implementations of these kinds of searches on Laser Interferometer Gravitational Wave (LIGO) detector data. The speed-up factors range from 10, when applied to Einstein-Home, to about 2000 for targeted searches which integrate over months of data.

79 ASTRONOMY AND ASTROPHYSICS↗

Gravitational-wave stochastic background from kinks and cusps on cosmic strings

We compute the contribution of kinks on cosmic string loops to stochastic background of gravitational waves (SBGW). We find that kinks contribute at the same order as cusps to the SBGW. We discuss the accessibility of the total background due to kinks as well as cusps to current and planned gravitational-wave detectors, as well as to the big bang nucleosynthesis (BBN), the cosmic microwave background (CMB), and pulsar timing constraints. As in the case of cusps, we find that current data from interferometric gravitational-wave detectors, such as LIGO, are sensitive to areas of parameter space of cosmic string models complementary to those accessible to pulsar, BBN, and CMB bounds.

79 ASTRONOMY AND ASTROPHYSICS↗

Omniscopes: Large area telescope arrays with only NlogN computational cost

We show that the class of antenna layouts for telescope arrays allowing cheap analysis hardware (with correlator cost scaling as NlogN rather than N{sup 2} with the number of antennas N) is encouragingly large, including not only previously discussed rectangular grids but also arbitrary hierarchies of such grids, with arbitrary rotations and shears at each level. We show that all correlations for such a 2D array with an n-level hierarchy can be efficiently computed via a fast Fourier transform in not two but 2n dimensions. This can allow major correlator cost reductions for science applications requiring exquisite sensitivity at widely separated angular scales, for example, 21 cm tomography (where short baselines are needed to probe the cosmological signal and long baselines are needed for point source removal), helping enable future 21 cm experiments with thousands or millions of cheap dipolelike antennas. Such hierarchical grids combine the angular resolution advantage of traditional array layouts with the cost advantage of a rectangular fast Fourier transform telescope. We also describe an algorithm for how a subclass of hierarchical arrays can efficiently use rotation synthesis to produce global sky maps with minimal noise and a well-characterized synthesized beam.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SGR 1806-20 and the gravitational wave detectors EXPLORER and NAUTILUS

The activity of the soft gamma ray repeater SGR 1806-20 is studied in correlation with the EXPLORER and NAUTILUS data, during the year 2004, for gravitational wave (GW) short signal search. Corresponding to the most significant triggers, the bright outburst on October 5th and the giant flare (GF) on December 27th, the associated GW signature is searched. Two methods are employed for processing the data. With the average-modulus algorithm, the presence of short pulses with energy E{sub gw{>=}}1.8x10{sup 49} erg is excluded with 90% probability, under the hypothesis of isotropic emission. This value is comparable to the upper limits obtained by LIGO regarding similar sources. Using the cross-correlation method, we find a discrepancy from the null-hypothesis of the order of 1%. This statistical excess is not sufficient to claim a systematic association between the gravitational and the electromagnetic radiations, because the estimated GW upper limits are yet several orders of magnitude far away from the theoretically predicted levels, at least three for the most powerful SGR flare.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Beam-Helicity Asymmetries in Double-Pion Photoproduction off the Proton

Beam-helicity asymmetries have been measured at the MAMI accelerator in Mainz in the three isospin channels gamma-vectorp->pi{sup +}pi{sup 0}n, gamma-vectorp->pi{sup 0}pi{sup 0}p, and gamma-vectorp->pi{sup +}pi{sup -}p. The circularly polarized photons, produced from bremsstrahlung of longitudinally polarized electrons, were tagged with the Glasgow magnetic spectrometer. Charged pions and the decay photons of pi{sup 0} mesons were detected in a 4pi electromagnetic calorimeter which combined the Crystal Ball detector with the TAPS detector. The precisely measured asymmetries are very sensitive to details of the production processes and are thus key observables in the modeling of the reaction dynamics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Observation of Ultrahigh-Energy Cosmic Rays with the ANITA Balloon-Borne Radio Interferometer

We report the observation of 16 cosmic ray events with a mean energy of 1.5x10{sup 19} eV via radio pulses originating from the interaction of the cosmic ray air shower with the Antarctic geomagnetic field, a process known as geosynchrotron emission. We present measurements in the 300-900 MHz range, which are the first self-triggered, first ultrawide band, first far-field, and the highest energy sample of cosmic ray events collected with the radio technique. Their properties are inconsistent with current ground-based geosynchrotron models. The emission is 100% polarized in the plane perpendicular to the projected geomagnetic field. Fourteen events are seen to have a phase inversion due to reflection of the radio beam off the ice surface, and two additional events are seen directly from above the horizon. Based on a likelihood analysis, we estimate angular pointing precision of order 2 deg. for the event arrival directions.

79 ASTRONOMY AND ASTROPHYSICS↗

PLC-based Impedance Measurement and Current Injection Response Analysis

Studying and mitigating the vulnerabilities of Programmable Logic Controllers (PLCs) to electromagnetic pulse is important for the reliability of the power system. In this paper, an effective impedance measurement scheme is proposed to estimate the susceptibility of PLCs to an electromagnetic pulse. The equivalent non-uniform transmission line model is established to eliminate the impact of the fixture in the de-embedding process. Based on the measured impedance, the equivalent circuit is established to calculate the response of the device when subjected to the electromagnetic pulse. The voltage and current responses of different interfaces are compared utilizing the developed pulse Current Injection (CI) method. Finally, the impedance measurement scheme is verified through testing using three measuring instruments. And the CI simulation experiments reveal the characteristics and susceptibilities of different PLCs interfaces, indicating that some protection measures are required for the reliable operation of PLC.

Qiu, Wei↗

High resolution, high signal-to-noise crystal spectrometer for measurements of line shifts in high-density plasmas

The Orion high-resolution x-ray (OHREX) spectrometer has been a successful tool for measuring the shapes of density-broadened spectral lines produced in short-pulse heated plasmas at the Orion laser facility. We have recently outfitted the instrument with a charge-couple device (CCD) camera, which greatly increased the accuracy with which we can perform line-shift measurements. Because OHREX is located on the outside of the Orion target chamber, no provisions for the shielding of electromagnetic pulses are required. With the CCD, we obtained a higher signal-to-noise ratio than we previously obtained with an image-plate detector. As a result, this allowed us to observe structure in the image produced by the diffraction from the two OHREX crystals, which was highly reproducible from shot to shot. This structure will ultimately limit the accuracy of our spectroscopic measurements

47 OTHER INSTRUMENTATION↗

Targeting ultra-high energy neutrinos with the ARIANNA experiment

The measurement of ultra-high energy (UHE) neutrinos (E > 10 16 eV) opens a new field of astronomy with the potential to reveal the sources of ultra-high energy cosmic rays especially if combined with observations in the electromagnetic spectrum and gravitational waves. The ARIANNA pilot detector explores the detection of UHE neutrinos with a surface array of independent radio detector stations in Antarctica which allows for a cost-effective instrumentation of large volumes. Twelve stations are currently operating successfully at the Moore's Bay site (Ross Ice Shelf) in Antarctica and at the South Pole. In this work, we will review the current state of ARIANNA and its main results. We report on a newly developed wind generator that successfully operates in the harsh Antarctic conditions and powers the station for a substantial time during the dark winter months. The robust ARIANNA surface architecture, combined with environmentally friendly solar and wind power generators, can be installed at any deep ice location on the planet and operated autonomously. We discuss the detector capabilities to determine the neutrino direction by reconstructing the signal arrival direction of a 800 m deep calibration pulser, and the reconstruction of the signal polarization using the more abundant cosmic-ray air showers. Lastly, we describe a large-scale design – ARIA – that capitalizes on the successful experience of the ARIANNA operation and is designed sensitive enough to discover the first UHE neutrino.

79 ASTRONOMY AND ASTROPHYSICS↗

A new B-dot probe-based diagnostic for amplitude, polarization, and wavenumber measurements of ion cyclotron range-of frequency fields on ASDEX Upgrade

A new B-dot probe-based diagnostic has been installed on an ASDEX Upgrade tokamak to characterize ion cyclotron range-of frequency (ICRF) wave generation and interaction with magnetized plasma. The diagnostic consists of a field-aligned array of B-dot probes, oriented to measure fast and slow ICRF wave fields and their field-aligned wavenumber (k{sub //}) spectrum on the low field side of ASDEX Upgrade. A thorough description of the diagnostic and the supporting electronics is provided. In order to compare the measured dominant wavenumber of the local ICRF fields with the expected spectrum of the launched ICRF waves, in-air near-field measurements were performed on the newly installed 3-strap ICRF antenna to reconstruct the dominant launched toroidal wavenumbers (k{sub tor}). Measurements during a strap current phasing scan in tokamak discharges reveal an upshift in k{sub //} as strap phasing is moved away from the dipole configuration. This result is the opposite of the k{sub tor} trend expected from in-air near-field measurements; however, the near-field based reconstruction routine does not account for the effect of induced radiofrequency (RF) currents in the passive antenna structures. The measured exponential increase in the local ICRF wave field amplitude is in agreement with the upshifted k{sub //}, as strap phasing moves away from the dipole configuration. An examination of discharges heated with two ICRF antennas simultaneously reveals the existence of beat waves at 1 kHz, as expected from the difference of the two antennas’ operating frequencies. Beats are observed on both the fast and the slow wave probes suggesting that the two waves are coupled outside the active antennas. Although the new diagnostic shows consistent trends between the amplitude and the phase measurements in response to changes applied by the ICRF antennas, the disagreement with the in-air near-field measurements remains. An electromagnetic model is currently under development to address this issue.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Precision Timing with shower maximum detectors based on pixelated micro-channel plates

Future calorimeters and shower maximum detectors at high luminosity colliders need to be highly radiation resistant and very fast. One exciting option for such a detector is a calorimeter composed of a secondary emitter as the active element. Here, we outline the study and development of a secondary emission calorimeter prototype using micro-channel plates (MCP) as the active element, which directly amplify the electromagnetic shower signal. We also demonstrate the feasibility of using a bare MCP within an inexpensive and robust housing without the need for any photo cathode, which is a key requirement for high radiation tolerance. Test beam measurements of the prototype were performed with 120 GeV primary protons and secondary beams at the Fermilab Test Beam Facility, demonstrating basic calorimetric measurements and precision timing capabilities. Using multiple pixel readout on the MCP, we demonstrate a transverse spatial resolution of 0.8 mm, and time resolution better than 40 ps for electromagnetic showers.

47 OTHER INSTRUMENTATION↗

Deep Geothermal Drilling Using Millimeter Wave Technology (Final Technical Research Report)

Conventional drilling methods are very mature, but still have difficulty drilling through very deep,very hard and hot rocks for geothermal, nuclear waste entombment and oil and gas applications.This project demonstrated the capabilities of utilizing only high energy beams to drill such rocks,commonly called ‘Direct Energy Drilling’, which has been the dream of industry since the invention of the laser in the 1960s. A new region of the electromagnetic spectrum, millimeter wave (MMW) wavelengths at 30-300 giga-hertz (GHz) frequency was used to accomplish this feat. To demonstrate MMW beam drilling capabilities a lab bench waveguide delivery, monitoring and instrument system was designed, built and tested around an existing (but non-optimal) 28 GHz frequency, 10 kilowatt (kW) gyrotron. Low waveguide efficiency, plasma generation and reflected power challenges were overcome. Real-time monitoring of the drilling process was also demonstrated. Then the technical capability of using only high power intense millimeter waves to melt (with some vaporization) four different rock types (granite, basalt, sandstone, limestone) was demonstrated through 36 bench tests. Full bore drilling up to 2” diameter (size limited by the available MMW power) was demonstrated through granite and basalt samples. The project also demonstrated that MMW beam transmission losses through high temperature (260°C, 500oF), high pressure (34.5 MPa, 5000 psi) nitrogen gas was below the error range of the meter long path length test equipment and instruments utilized. To refine those transmission losses closer, to allow extrapolation to very great distances, will require a new test cell design and higher sensitivity instruments. All rock samples subjected to high peak temperature by MMW beams developed fractures due to thermal stresses, although the peak temperature was thermodynamically limited by radiative losses. Therefore, this limited drill rate and rock strength data were not able to be determined experimentally. New methods to encapsulate larger rock specimens must be developed and higher power intensities are needed to overcome these limitations. It was demonstrated that rock properties are affected (weakening then strengthened) by exposure to high temperatures. Since only MMW beams can economically reach rock temperatures of over 1650°C, even exceeding 3000°C, that can cause low viscosity melts or vaporization of rocks. Future encapsulated rock specimens must provide sufficiently large sizes of thermally impacted material to provide for the necessary rock strength, permeability and other analyzes required. Multiple MMW field systems, tools and methods for drilling and lining were identified. It was concluded that forcing a managed over-pressure drilling operation would overcome water influx and hot rock particulates handling problems, while simultaneously forming the conditions necessary to create a strong, sealing rock melt liner. Materials that contact hot rock surfaces were identified for further study. High power windows and gases for beam transmission under high pressures are critical paths for some of the MMW drilling systems. Straightness/ alignment can be a great benefit or a problem, especially if a MMW beam is transmitted through an existing, conventionally drilled bore.

04 OIL SHALES AND TAR SANDS↗