Search NASA⌕ Search

SEARCH · Search NASA

Results for “FRACTURES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Frictional stability-permeability relationships for fractures in shales

There is wide concern that fluid injection in the subsurface, such as for the stimulation of shale reservoirs or for geological CO 2 sequestration (GCS), has the potential to induce seismicity that may change reservoir permeability due to fault slip. However, the impact of induced seismicity on fracture permeability evolution remains unclear due to the spectrum of modes of fault reactivation (e.g., stable versus unstable). As seismicity is controlled by the frictional response of fractures, we explore friction-stability-permeability relationships through the concurrent measurement of frictional and hydraulic properties of artificial fractures in Green River shale (GRS) and Opalinus shale (OPS). We observe that carbonate-rich GRS shows higher frictional strength but weak neutral frictional stability. The GRS fracture permeability declines during shearing while an increased sliding velocity reduces the rate of permeability decline. By comparison, the phyllosilicate-rich OPS has lower friction and strong stability while the fracture permeability is reduced due to the swelling behavior that dominates over the shearing induced permeability reduction. Furthermore, we conclude that the friction-stability-permeability relationship of a fracture is largely controlled by mineral composition and that shale mineral compositions with strong frictional stability may be particularly subject to permanent permeability reduction during fluid infiltration.

58 GEOSCIENCES↗
DOE OSTI2017

Three‐Phase CO 2 Flow in a Basalt Fracture Network

Abstract Geologic CO 2 sequestration in basalt reservoirs is predicated on permanent CO 2 isolation via rapid mineralization reactions. This process is supported by a substantial body of evidence, including laboratory experiments documenting rapid mineralization rates, regional storage estimates indicating large, accessible storage reservoirs, and two successful pilot‐scale studies. Nevertheless, there remains significant uncertainty in the behavior of CO 2 flow within basalt fracture networks, particularly in the context estimating physical trapping potential in early time and as CO 2 undergoes phase change. In this study, a Monte Carlo numerical model is designed to simulate a supercritical CO 2 plume infiltrating a low‐permeability flood basalt entablature. The fracture network model is based on outcrop‐scale LiDAR mapping of Columbia River Basalt, and CO 2 flow is simulated within fifty equally probable realizations of the fracture network. The spatial distribution of fracture permeability for each realization is randomly drawn from a basalt aperture distribution, and ensemble results are analyzed with e‐type estimates to compute mean and standard deviation of fluid pressure and CO 2 saturation. Results of this model after 10 years of simulation suggest that (1) CO 2 flow converges on a single dominant flow path, (2) CO 2 accumulates at fracture intersections, and (3) variability in permeability can account for a 1.6 m depth interval within which free CO 2 may change phase from supercritical fluid to subcritical liquid or gas. In the context of CO 2 sequestration in basalt, these results suggest that physical CO 2 trapping may be substantially enhanced as carbonate minerals precipitate within the basalt fracture network.

Gierzynski, Alec O.↗
DOE OSTI2016

Diffusion-Weighted MRI Assessment of Adjacent Disc Degeneration After Thoracolumbar Vertebral Fractures

ObjectiveThe purpose of this study was to assess, by the mean apparent diffusion coefficient (ADC), if a relationship exists between disc ADC and MR findings of adjacent disc degeneration after thoracolumbar fractures treated by anatomic reduction using vertebral augmentation (VAP).Materials and MethodsTwenty non-consecutive patients (mean age 50.7 years; range 45–56) treated because of vertebral fractures, were included in this study. There were 10 A3.1 and 10 A1.2 fractures (AO classification). Surgical treatment using VAP was applied in 14 cases, and conservative in 6 patients. MRI T2-weighted images and mapping of apparent diffusion coefficient (ADC) of the intervertebral disc adjacent to the fractured segment were performed after a mean follow-up of 32 months. A total of 60 discs, 3 per patient, were analysed: infra-adjacent, supra-adjacent and a control disc one level above the supra-adjacent.ResultsNo differences between patients surgically treated and those following a conservative protocol regarding the average ADC values obtained in the 20 control discs analysed were found. Considering all discs, average ADC in the supra-adjacent level was lower than in the infra-adjacent (1.35 ± 0.12 vs. 1.53 ± 0.06; p < 0.001). Average ADC values of the discs used as a control were similar to those of the infra-adjacent level (1.54 ± 0.06). Compared to surgically treated patients, discs at the supra-adjacent fracture level showed statistically significant lower values in cases treated conservatively (p < 0.001). The variation in the delay of surgery had no influence on the average values of ADC at any of the measured levels.ConclusionsADC measurements of the supra-adjacent discs after a mean follow-up of 32 months following thoracolumbar fractures, showed that restoration of the vertebral collapse by minimally invasive VAP prevents posttraumatic disc degeneration.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2022

A multi-resolution approach to hydraulic fracture simulation

Abstract We present a multi-resolution approach for constructing model-based simulations of hydraulic fracturing, wherein flow through porous media is coupled with fluid-driven fracture. The approach consists of a hybrid scheme that couples a discrete crack representation in a global domain to a phase-field representation in a local subdomain near the crack tip. The multi-resolution approach addresses issues such as the computational expense of accurate hydraulic fracture simulations and the difficulties associated with reconstructing crack apertures from diffuse fracture representations. In the global domain, a coupled system of equations for displacements and pressures is considered. The crack geometry is assumed to be fixed and the displacement field is enriched with discontinuous functions. Around the crack tips in the local subdomains, phase-field sub-problems are instantiated on the fly to propagate fractures in arbitrary, mesh independent directions. The governing equations and fields in the global and local domains are approximated using a combination of finite-volume and finite element discretizations. The efficacy of the method is illustrated through various benchmark problems in hydraulic fracturing, as well as a new study of fluid-driven crack growth around a stiff inclusion.

58 GEOSCIENCES↗
DOE OSTI2021

Characterizing Reactive Transport Behavior in a Three-Dimensional Discrete Fracture Network

While several studies have linked network and in-fracture scale properties to conservative transport behavior in subsurface fractured media, studies on reactive transport cases remain relatively underdeveloped. In this study, we explore the behavior of an irreversible kinetic reaction during the interaction of two solute plumes, one consisting of species A and the other species B. When the plumes converge, these species react kinetically to form a new species C via A+B→kC. This reactive system is studied using a three-dimensional discrete fracture network (DFN) model coupled with reactive Lagrangian particle tracking. We find that the interplay of network topology and chemical properties of the reactive solutes controls reactive transport processes. The network topology drives species A and B together, and the chemical properties dictate whether and how quickly a reaction occurs. Results demonstrate that reactions are most likely to occur in high-velocity fractures that make up the network backbone. The interplay between species’ chemical properties and transport is characterized by a non-dimensional Damköhler (Da) number. We show that the spatial distribution of reactions is sensitive to Da, which subsequently influences late-time tailing behavior in outlet breakthrough time distributions. The results of this study provide initial insights into how an irreversible reaction occurs during transport in a fracture network, using a methodology that can be applied to study reactive transport in a wide range of fractured media environments and contexts.

58 GEOSCIENCES↗
DOE OSTI2017

Effect of Normalizing Temperature on Fracture Characteristic of Tensile and Impact Tested Creep Strength-Enhanced Ferritic P92 Steel

The high-temperature Cr-Mo creep strength-enhanced ferritic (CSEF) steels are mainly used in nuclear and thermal power plants. In the present investigation, a systematic study on fracture surface morphologies of tensile and impact tested specimens and mechanical properties of cast and forged (C&F) P92 steel was performed for various heat treatment conditions. The heat treatment was carried out in normalizing temperature range of 950-1150 °C and then tempered to a fixed tempering temperature of 760 °C. The effect of varying normalizing temperatures before and after tempering on microstructure evolution, tensile properties, Vicker’s hardness and Charpy toughness was studied. The normalizing temperature before and after tempering was having a noticeable effect on mechanical properties of as-received P92 steel. The fracture surface of impact and tensile tested samples was also studied for various normalizing temperatures with or without tempering. Fracture surface morphology was affected by the presence of secondary phase carbide particles. The fraction area of cleavage facets on the tensile fracture surface was found to be increased with an increase in the normalizing temperature. The fractured tensile specimens were characterized by transgranular ductile dimples, tear ridges and transgranular cleavage facets for various heat treatments. The fracture mode of impact tested samples was more complex. It showed both quasi-cleavage facets and ductile dimple tearing for various normalizing temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Effect of the As-Forged and Heat-Treated Microstructure on the Room Temperature Anisotropic Ductile Fracture of Inconel 718

The purpose of the present work was to investigate the effect of primary carbides and the δ-phase on the anisotropic ductile fracture of Inconel 718 in the forging process. Inconel 718 alloys were prepared by VIM + VAR processes with various carbon contents (0.009 and 0.027 wt.%). Then, the alloys were forged and annealed at temperatures of 980 and 1030 °C. The room temperature mechanical anisotropy of the alloys was evaluated at the longitudinal direction (LD) and transverse direction (TD). Tensile and impact tests were used to characterize the mechanical properties of the specimens. The microstructural characterization and the fractography of the alloys were carried out by FE-SEM. The obtained results showed that the fracture strain and the impact energy in the TD were 30-50% lower than the LD. The fracture was accelerated by the δ-phase, leading to the reduction of impact energy in the longitudinal and the lateral directions up to 50%. The low-carbon alloy indicated similar characteristics in both the LD and the TD. Aligned carbides changed the fracture path from a zigzag path in the LD to a fibrous path in the TD, while the δ-phase created a flat fracture path. The shear lip area ratio in the tensile fracture cross section was decreased by reducing ductility.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Grain Boundary and Lattice Fracture Toughness of UO 2 Measured Using Small-Scale Mechanics

Small-scale mechanical testing has been used to isolate the properties of individual grain boundaries and regions of the lattice in undoped UO 2 polycrystals. Notched microcantilever specimens were prepared by focused ion beam milling and tested in bending. Fracture toughness values were calculated from finite element analysis of the sample geometry at fracture load using the J-integral method. Lattice and grain boundary fracture toughness values of 1.17 ± 0.16 MPa m 1/2 and 1.08 ± 0.08 MPa m 1/2 , respectively, were obtained. The similarity between the lattice and grain boundary fracture toughness values is consistent with the preference for transgranular room-temperature fracture in UO 2 . The grain boundary and lattice fracture toughness values also agree well with the toughness of dense polycrystals, which suggests that microstructural-scale toughening mechanisms are limited in such samples.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Vertebral Compression Fractures in Elderly: How to Recognize and Report

Purpose of Review: In elderly patients, when there is no obvious evidence of malignancy on plain radiography, it can be difficult to evaluate benign and malignant vertebral fractures, because these patients are predisposed to senile osteoporosis and malignant disease. The only complaint could be back pain, as both types of fractures have the same symptoms and signs. Recent Findings: A reliable imaging modality is always required, as appropriate management and early diagnosis of malignant vertebral fractures are important. Summary: The aim of this study was to highlight the importance of recognizing, through diagnostic techniques, the presence of vertebral fractures, since the majority of vertebral fractures do not come to clinical attention and to determine the parameters that are useful for the early differentiation between benign versus malignant vertebral fractures.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2023

A deep learning upscaling framework: Reactive transport and mineral precipitation in fracture-matrix systems

Pore-scale modeling has limited applicability at large scales due to its high computational cost. One common approach to upscale pore-scale models is the use of effective medium theories, which homogenize small-scale features in a porous structure and characterize the medium by macroscale properties (e.g., permeability) and equations (e.g., Darcy’s law). However, there are classes of physical processes for which effective medium approximations may become inaccurate, e.g., mineral precipitation and clogging during reactive transport. We have developed a deep learning upscaling framework, in which pore-scale modeling is directly employed in macroscale systems, without relying on effective medium approximations. The upscaling framework is first developed for general multiscale systems and then applied to modeling reactive transport with mineral precipitation in the altered layer in fracture-matrix structures. Solute transport from the fractures to the matrix is modeled as a wall boundary condition for the fractures, which, in turn, is predicted by recurrent neural networks using the concentration histories at the fracture-matrix boundary. Specifically, we consider a meter-scale fracture network embedded in sandstones, where the smallest feature is at the micron scale. Here the proposed framework allows us to span five orders of magnitude in length scales by capturing mineral precipitation in the altered layer of the rock matrix at the pore scale across the entire meter-scale fracture network.

42 ENGINEERING↗
DOE OSTI2019

Flow behavior of hydraulic fractured tight formations considering Pre-Darcy flow using EDFM

For tight reservoirs/formations, flow in fracture and matrix obey different flow patterns. Pre-Darcy flow always exists in low permeability subsurface porous media while Darcy flow can be applied in fracture. It is an outstanding challenge to understand the flow behavior coupling different flow mechanisms. As numerical simulation can predict field-scale performance so the development of efficient simulation method becomes a key issue to evaluate the flow behavior. In this paper, we develop an improved discrete fracture model based on the widely used embedded discrete facture model (EDFM) to simulate the transport both in homogenous and heterogeneous porous media in the presence of Pre-Darcy flow. The conservation equations are derived for fracture and matrix firstly and then discretized by fully implicit method. The transmissibility of different connection types is defined and the detailed calculation workflow is presented as well. The proposed model is verified through the comparison with the model using local grid refined (LGR) method. It is discovered that our simulation method exhibits good accuracy when analyzing the effect of Pre-Darcy flow. Some examples are shown including 1D scalar transport, 2D heterogeneous, 3D flow, complex fracture system and multiple well system problems with fully-coupled flow in fracture and matrix. The pressure distribution and well flux are demonstrated to analyze the Pre-Darcy flow characteristics. Results indicate that the new model works robustly for different flow problems which provide further insight into the Pre-Darcy flow in low permeability media.

02 PETROLEUM↗
DOE OSTI2018

Effects of initial microstructures on serrated flow features and fracture mechanisms of a nickel-based superalloy

Highlights: • Uniaxial tensile tests are performed on a nickel-based superalloy at 473 K–973 K and low strain rates. • Effects of initial microstructures on serrated flow features, and fracture characteristics are analyzed. • The dislocation across slip in the matrix is responsible for the serrated flow. • Nucleation and growth of micro-voids is the main fracture mechanism of ST and HS superalloys. • The better tensile ductility is obtained with raising the deformation temperatures for the SAT superalloy. - Abstract: The uniaxial tensile experiments are performed on a nickel-based superalloy with different initial microstructures at intermediate temperatures (473–973) K and low strain rates (0.0001–0.001) s{sup −1}. Effects of initial microstructures on plastic deformation mechanisms, serrated flow features, and fracture characteristics are analyzed. It is clearly demonstrated that the plastic deformation mechanism of serrated flow is irrelevant to the initial microstructures, and the dislocation across slip in the matrix is responsible for the serrated flow. However, the effects of initial microstructures on fracture mechanisms are obvious, i.e., the main fracture mechanism of the ST (solution treated) and HS (solution plus γ′/γ″ phases aging precipitation) superalloys are the nucleation and growth of micro-voids, which accelerates the break of carbides and interfacial failure of carbides/matrix. While for the SAT (solution plus δ phases aging precipitation) superalloy, δ phases and carbides play a significant role in the nucleation of micro-voids. Furthermore, the increase of the deformation temperature reduces the elongation to fracture of the ST and HS superalloys. However, the better tensile ductility is obtained with raising the deformation temperatures for the SAT superalloy.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Alteration in micro-mechanical characteristics of wellbore cement fracture surfaces due to fluid exposure

The stiffness of wellbore cement fracture surfaces was measured after exposing to the advective flow of nitrogen, silicone oil, and medium sweet dead crude oil for different exposure periods. The test specimens were extracted from fractured cement cylinders, where the cement fracture surfaces were exposed to the different fluids up to 15 weeks. A nanoindenter with a Berkovich indenter tip was used to measure load-indentation depth data, which was used to extract the elastic modulus (E) and nano-hardness (H) of the cement fracture surfaces. A reduction in the elastic modulus compared with an unexposed specimen were observed in all the specimens. Both elastic modulus and nano-hardness for the specimens exposed to silicone oil were lower than specimens exposed to nitrogen gas and varied with the period of exposure. The elastic modulus and nano-hardness of the specimens exposed to crude oil were the lowest with a significant decrement with the exposure period. The frequency distribution of the nanoindentation measurements shows that the volume-fraction ratio of the two types of cement hydrated nanocomposites for both the unexposed and test specimens is about 70:30%. Phase transformation beneath the indenter is observed for all of the specimens, with more obvious plastic deformation in specimens exposed to crude oil. Analytical measurements (SEM, EDS, FT-IR, and XRD) on exposed cement fracture surfaces reveal different levels of physical and chemical alteration that are consistent with the reduction in stiffness measured by nanoindentation. Furthermore, the study suggests that cement stiffness will decrease due to crude oil exposure, and the fracture will be sensitive to stress and pore pressure with time.

42 ENGINEERING↗
DOE OSTI2016

A 2.5D Reactive Transport Model for Fracture Alteration Simulation

Understanding fracture alteration resulting from geochemical reactions is critical in predicting fluid migration in the subsurface and is relevant to multiple environmental challenges. Here in this paper, we present a novel 2.5D continuum reactive transport model that captures and predicts the spatial pattern of fracture aperture change and the development of an altered layer in the near-fracture region. The model considers permeability heterogeneity in the fracture plane and updates fracture apertures and flow fields based on local reactions. It tracks the reaction front of each mineral phase and calculates the thickness of the altered layer. Given this treatment, the model is able to account for the diffusion limitation on reaction rates associated with the altered layer. The model results are in good agreement with an experimental study in which a CO 2 -acidified brine was injected into a fracture in the Duperow Dolomite, causing dissolution of calcite and dolomite that result in the formation of a preferential flow channel and an altered layer. Finally, with an effective diffusion coefficient consistent with the experimentally observed porosity of the altered layer, the model captures the progressive decrease in the dissolution rate of the fast-reacting mineral in the altered layer.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2017

Alteration and Erosion of Rock Matrix Bordering a Carbonate-Rich Shale Fracture

A novel reactive transport model has been developed to examine the processes that affect fracture evolution in a carbonate-rich shale. An in situ synchrotron X-ray microtomography experiment, flowing CO 2 saturated water through a single fracture mini-core of Niobrara Shale provided the experimental observations for the development and testing of the model. The phenomena observed included the development of a porous altered layer, flow channeling, and increasingly limited calcite dissolution. The experimental observations cannot be explained by models that consider only mineral dissolution and development of an altered layer. The difference between the fracture volume change recorded by the microtomography images and what would be expected from mineral dissolution alone suggest that there is erosion of the altered layer as it develops. The numerical model includes this additional mechanism, with the erosion rate based on the thickness of the altered layer, and successfully captures the evolution of the geochemical reactions and morphology of the fracture. The findings imply that the abundance (with a threshold of approximately 35%) and reactivity of the rapidly reacting mineral control the development and erodibility of the altered layer on the fracture surfaces, and therefore fracture opening.

58 GEOSCIENCES↗
DOE OSTI2019

Insights into a Greener Stimuli-Responsive Fracturing Fluid for Geothermal Applications

StimuFracTM, is a non-toxic stimuli-responsive fracturing fluid consisting on a CO2-reactive polymer which has shown at the lab-scale to consistently fracture rock cores at significantly lower net pressures in a range of representative geothermal pressure/temperature conditions. In this work, we report on the two main mechanisms responsible for fracturing rock at lower net pressures with this novel fracturing fluid. The first mechanism is the additional work / overpressure generated by aqueous polymer solution during its CO2-triggered volume expansion. The second mechanism is associated to a reduction in pore invasion pressure as a result of the lower interfacial tension of StimuFrac. This reduction in pore invasion pressure results in a reduction in fracturing net pressure as previously reported. The results presented in this work illustrate the potential of StimuFrac as a greener and less-energy intensive fracturing fluid for geothermal and fossil energy production.

Fernandez, Carlos A.↗
DOE OSTI2020

Flow Channeling in Fracture Networks: Characterizing the Effect of Density on Preferential Flow Path Formation

Flow channelization is a commonly observed phenomenon in fractured subsurface media where the flow of fluids is restricted primarily to highly transmissive fracture networks surrounded by a low-permeability rock matrix. The multiscale structural heterogeneity of these networks results in multiscale flow channelization where preferential flow paths form at length scales ranging from the entire system down to the subfracture size. We present an analysis of how one of the largest scales in fractured media, the network density, influences the degree of flow channeling that occurs using an ensemble of semigeneric three-dimensional discrete fracture network (DFN) simulations. We construct 10 DFNs, whose fracture lengths follow a power law distribution, at four densities for a total of 40 networks. We characterize their structure in terms of the network topology and geometry. Eulerian and Lagrangian observations of the steady-state flow fields obtained within the networks are used to quantify the degree of flow channelization at the network scale. We introduce a measure for the importance-ranking/hierarchy of different flow paths in the network using graph-based analysis of Lagrangian transport by which the degree of flow channeling between networks is compared. These flow observations are then linked to the structural properties of the networks. In general, network-scale flow channeling decreases as the network density increases. However, at low densities, there is more uniform flow within the entire connected network than in high-density networks. We also demonstrate how standard transport observables can be used to infer the degree of flow channelization occurring within a fracture network.

58 GEOSCIENCES↗
DOE OSTI2024

Quartz Dissolution Effects on Flow Channelization and Transport Behavior in Three‐Dimensional Fracture Networks

We perform a set of reactive transport simulations in three-dimensional fracture networks to characterize the impact of geochemical reactions on flow channelization. Flow channelization, a frequently observed phenomenon in porous and fractured subsurface rock formations, results from the spatially variable hydraulic resistance offered by a geological structure. In addition to geo-structural features such as network connectivity, geometry, and hydraulic resistance, geochemical reactions, for example, dissolution and precipitation, can dynamically inhibit or enhance flow channelization. These geochemical processes can change the fracture permeability leading to increased flow channelization, which are localized connected regions of high volumetric flow rates that are seemingly ubiquitous in the subsurface. In our simulations, fractures partially filled with quartz are gradually dissolved until quasi-steady state conditions are obtained. We compare the flow field's initial unreacted and final dissolved states in terms of flow and transport observations. We observe that the dissolved fracture networks provide less resistance to flow and exhibit increased flow channelization when compared to their unreacted counterparts. However, there is substantial variability in the magnitude of these changes which implies that the channelization strongly depends on the network structure. In turn, we identify the interplay between the particular network structure and the impact of geochemical dissolution on flow channelization. The presented results indicate that geological systems that have been weathering or reactive for longer times in older landscapes are likely to have increased flow channelization compared to their equivalent but younger counterparts, which implies a time dependence on flow channelization in fractured media.

Hyman, Jeffrey D.↗