Search NASA⌕ Search

SEARCH · Search NASA

Results for “FUNCTIONAL INTEGRATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Subsonic potential aerodynamics for complex configurations - A general theory

A general theory of subsonic potential aerodynamic flow around a lifting body having arbitrary shape and motion is presented. By using the Green function method, an integral representation for the velocity potential is obtained for both supersonic and subsonic flow. Under the small perturbation assumption, the potential at any point in the field depends only upon the values of the potential and its normal derivative on the surface of the body. On the surface of the body, this representation reduces to an integro-differential equation relating the potential and its normal derivative (which is known from the boundary conditions) on the surface. The theory is applied to finite-thickness wings in subsonic steady and oscillatory flows.

Morino, L.↗
NASA NTRS1974

Analysis of acoustic radiation in a jet flow environment

The analysis of sound fields from arbitrary source distributions in terms of Legendre and spherical Hankel functions is well known. The purpose of this paper is to extend this classical method of analysis to environments such as jet flows where flow and flow gradients are inherently present. The wave-equation governing the radiation of sound in such an environment is derived. The steady state flow and flow gradients in the axial and transverse directions appear as coefficients in the terms of the wave-equation. A semi-numerical method is used to solve the wave-equation in terms of modified spherical harmonics yielding the phase velocities and the directivities of an infinite set of modes. The directivity of each mode is obtained in terms of modified Legendre functions by numerical integration. Some results of these directivity and phase-velocity calculations are presented for a limited number of frequency and flow parameters. Both convective and shear refraction are shown to be important.

Mungur, P.↗
NASA NTRS1974

A General Theory of Unsteady Compressible Potential Aerodynamics

The general theory of potential aerodynamic flow around a lifting body having arbitrary shape and motion is presented. By using the Green function method, an integral representation for the potential is obtained for both supersonic and subsonic flow. Under small perturbation assumption, the potential at any point, P, in the field depends only upon the values of the potential and its normal derivative on the surface, sigma, of the body. Hence, if the point P approaches the surface of the body, the representation reduces to an integro-differential equation relating the potential and its normal derivative (which is known from the boundary conditions) on the surface sigma. For the important practical case of small harmonic oscillation around a rest position, the equation reduces to a two-dimensional Fredholm integral equation of second-type. It is shown that this equation reduces properly to the lifting surface theories as well as other classical mathematical formulas. The question of uniqueness is examined and it is shown that, for thin wings, the operator becomes singular as the thickness approaches zero. This fact may yield numerical problems for very thin wings.

Morino, L.↗
NASA NTRS1975

The revolution in data gathering systems

Data acquisition systems used in NASA's wind tunnels from the 1950's through the present time are summarized as a baseline for assessing the impact of minicomputers and microcomputers on data acquisition and data processing. Emphasis is placed on the cyclic evolution in computer technology which transformed the central computer system, and finally the distributed computer system. Other developments discussed include: medium scale integration, large scale integration, combining the functions of data acquisition and control, and micro and minicomputers.

Cambra, J. M.↗
NASA NTRS1974

Oscillatory supersonic kernel function method for interfering surfaces

In the method presented in this paper, a collocation technique is used with the nonplanar supersonic kernel function to solve multiple lifting surface problems with interference in steady or oscillatory flow. The pressure functions used are based on conical flow theory solutions and provide faster solution convergence than is possible with conventional functions. In the application of the nonplanar supersonic kernel function, an improper integral of a 3/2 power singularity along the Mach hyperbola is described and treated. The method is compared with other theories and experiment for two wing-tail configurations in steady and oscillatory flow.

Cunningham, A. M., Jr.↗
NASA NTRS1975

A study of the effects of vertical resolution and measurement errors on an iteratively inverted temperature profile

A direct inversion method for inverting the temperature profile from satellite-measured radiation is discussed. The nth power of the weighting function in the integral radiative-transfer equation is used as the weight in the averaging process. The vertical resolution of the inverted temperature profile and the response of the inverted temperature profile to the measurement errors are examined in terms of n. It is found that for smaller values of n, the vertical resolution and the effect of measurement errors are reduced. When n = 0, both the vertical resolution and error effect are minimum. The temperature profile is adjusted by a constant; any structure different from the initial shape cannot be resolved. This is equivalent to the case where the entire atmosphere is treated as one layer with a fixed shape of temperature profile. When n approaches infinity, both the vertical resolution and error effect are maximum. This is equivalent to the case where the entire atmosphere is divided into m (the number of spectral channels) layers. Within each layer, the temperatures are adjusted by a constant, and any structure different from the initial shape cannot be resolved. Also, the shape of the final solution is closer to the initial profile if the value of n is smaller.

Chow, M.-D.↗
NASA NTRS1975

Steady subsonic flow around finite-thickness wings

The general method for analyzing steady subsonic potential aerodynamic flow around a lifting body having arbitrary shape is presented. By using the Green function method, an integral representation for the potential is obtained. Under small perturbation assumption, the potential at any point, P, in the field depends only upon the values of the potential and its normal derivative on the surface of the body. Hence if the point P approaches the surface of the body, the representation reduces to an integral equation relating the potential and its normal derivative (which is known from the boundary conditions) on the surface. The question of uniqueness is examined and it is shown that, for thin wings, the operator becomes singular as the thickness approaches zero. This fact may yield numerical problems for very thin wings. However, numerical results obtained for a rectangular wing in subsonic flow show that these problems do not appear even for thickness ratio tau = .001. Comparison with existing results shows that the proposed method is at least as fast and accurate as the lifting surface theories.

Kuo, C. C.↗
NASA NTRS1976

On the formulation of the aerodynamic characteristics in aircraft dynamics

The theory of functionals is used to reformulate the notions of aerodynamic indicial functions and superposition. Integral forms for the aerodynamic response to arbitrary motions are derived that are free of dependence on a linearity assumption. Simplifications of the integral forms lead to practicable nonlinear generalizations of the linear superpositions and stability derivative formulations. Applied to arbitrary nonplanar motions, the generalization yields a form for the aerodynamic response that can be compounded of the contributions from a limited number of well-defined characteristic motions, in principle reproducible in the wind tunnel. Further generalizations that would enable the consideration of random fluctuations and multivalued aerodynamic responses are indicated.

Tobak, M.↗
NASA NTRS1975

A three-dimensional viscoelastic model of a strike slip fault

An analytic approximation to the Green's function for the displacements due to a strike slip point source in an elastic layer over a viscoelastic half-space is developed. This approximate Green's function is useful because it can be analytically integrated over the fault surface. Comparison with a numerical integration of the exact solution integral indicates that the approximation is quite good. The approximate Green's function is integrated analytically to obtain the displacements due to a finite rectangular strike slip fault in an elastic layer over a viscoelastic half-space. Ground displacements and angle changes from a model survey net are computed to illustrate the viscoelastic relaxation which follows a fracture in the elastic region.

Rundle, J. B.↗
NASA NTRS1975

Shear flow aerodynamics - Lifting surface theory

A lifting surface theory based on a parallel shear flow model is presented for steady, incompressible flows. The theory is intended to account approximately for the presence of a boundary layer. The method of Fourier transforms is used to calculate the pressure on a surface of infinite extent and arbitrary contour. Immediately above the surface is a region of sheared flow (the boundary layer), outside of which the flow velocity is constant. The Fourier transform of the pressure on this surface is used to derive the shear flow equivalent to the kernel function of classical potential flow lifting surface theory. The kernel function provides an integral relation between the upwash at a given point on the surface and the pressure everywhere on the surface. This relation is treated as an integral equation for the pressure, and is solved numerically. Computations are presented for the lift and pitching moment on a flat plate in two-dimensional flow, and for flat, rectangular wings of aspect ratio 1, 2, and 5. As expected, the shear layer decreases the lift curve slope; however, the shear layer (whose thickness is constant along the wing chord) has little effect on the center of pressure.

Ventres, C. S.↗
NASA NTRS1976

A separation theorem for the stochastic sampled-data LQG problem

This paper considers the control of a continuous linear plant disturbed by white plant noise when the control is constrained to be a piecewise constant function of time; i.e. a stochastic sampled-data system. The cost function is the integral of quadratic error terms in the state and control, thus penalizing errors at every instant of time while the plant noise disturbs the system continuously. The problem is solved by reducing the constrained continuous problem to an unconstrained discrete one. It is shown that the separation principle for estimation and control still holds for this problem when the plant disturbance and measurement noise are Gaussian.

Halyo, N.↗
NASA NTRS1975

The evolution of the Tracking and Data Relay Satellite System /TDRSS/

Certain limitations of a ground-based network of remote tracking stations for communications with spacecraft are to be overcome by making use of a space-based network. Studies related to the development of a Tracking and Data Relay Satellite System (TDRSS) are discussed. The TDRSS is to function as an integral part of the post-1980 NASA Spaceflight Tracking and Data Network (STDN). The TDRSS will consist of two operational Tracking and Data Relay (TDR) spacecraft separated by at least 130 deg in longitude. According to current planning, the STDN will also include five ground-based sites, for support of users with orbital altitudes greater than approximately 2000 km, and two launch support sites.

Godfrey, R. D.↗
NASA NTRS1976

Atmospheric, Magnetospheric and Plasmas in Space (AMPS) spacelab payload definition study; volume 4: Part 2, Labcraft payload general specification

The Labcraft Payload General Specification (LPGS) amplifies those general requirements in the Labcraft Program Specification (LPS) to ensure that all hardware, software, and STS elements will successfully function as an integrated system to accomplish the objectives of the first Labcraft mission. Contract End Item Specifications (CEIS) and Procurement Drawings (PDs) prepared and implemented for all deliverable hardware and software elements are discussed.

Keeley, J. T.↗
NASA NTRS1977

Advanced space program studies. Overall executive summary

NASA and DoD requirements and planning data were used in multidiscipline advanced planning investigations of space operations and associated elements (including man), identification of potential low cost approaches, vehicle design, cost synthesis techniques, technology forecasting and opportunities for DoD technology transfer, and the development near-, mid-, and far-term space initiatives and development plans with emphasis on domestic and military commonality. An overview of objectives and results are presented for the following studies: advanced space planning and conceptual analysis, shuttle users, technology assessment and new opportunities, standardization and program practice, integrated STS operations planning, solid spinning upper stage, and integrated planning support functions.

Wolfe, M. G.↗
NASA NTRS1978

Gamma ray spectroscopy in astrophysics: Solar gamma ray astronomy on solar maximum mission

The SMM gamma ray experiment and the important scientific capabilities of the instrument are discussed. The flare size detectable as a function of spectrum integration time was studied. A preliminary estimate indicates that a solar gamma ray line at 4.4 MeV one-fifth the intensity of that believed to have been emitted on 4 August 1972 can be detected in approximately 1000 sec with a confidence level of 99%.

Forrest, D. J.↗
NASA NTRS1980

Overview of integrated programs for aerospace-vehicle design (IPAD)

An overview of a joint industry/government project, denoted Integrated Programs for Aerospace-Vehicle Design (IPAD), which focuses on development of technology and associated software for integrated company-wide management of engineering information is presented. Results to date are summarized and include an in-depth documentation of a representative design process for a large engineering project, the definition and design of computer-aided design software needed to support that process, and the release of prototype software to integrated selected design functions.

Fulton, R. E.↗
NASA NTRS1979

A tactile-output paging communication system for the deaf-blind

A radio frequency paging communication system that has coded vibrotactile outputs suitable for use by deaf-blind people was developed. In concept, the system consists of a base station transmitting and receiving unit and many on-body transmitting and receiving units. The completed system has seven operating modes: fire alarm; time signal; repeated single character Morse code; manual Morse code; emergency aid request; operational status test; and message acknowledge. The on-body units can be addressed in three ways: all units; a group of units; or an individual unit. All the functions developed were integrated into a single package that can be worn on the user's wrist. The control portion of the on-body unit is implemented by a microcomputer. The microcomputer is packaged in a custom-designed hybrid circuit to reduce its physical size.

Baer, J. A.↗
NASA NTRS1981

Support systems of the orbiting quarantine facility

The physical support systems, the personnel management structure, and the contingency systems necessary to permit the Orbiting Quarantine Facility (OQF) to function as an integrated system are described. The interactions between the subsystems within the preassembled modules are illustrated. The Power Module generates and distributes electrical power throughout each of the four modules, stabilizes the OQF's attitude, and dissipates heat generated throughout the system. The Habitation Module is a multifunctional structure designed to monitor and control all aspects of the system's activities. The Logistics Module stores the supplies needed for 30 days of operation and provides storage for waste materials generated during the mission. The Laboratory Module contains the equipment necessary for executing the protocol, as well as an independent life support system.

Source record↗