Search NASA⌕ Search

SEARCH · Search NASA

Results for “Field Operators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Out-of-plane ferroelectricity and robust magnetoelectricity in quasi-two-dimensional materials

Thin-film ferroelectrics have been pursued for capacitive and nonvolatile memory devices. They rely on polarizations that are oriented in an out-of-plane direction to facilitate integration and addressability with complementary metal-oxide semiconductor architectures. The internal depolarization field, however, formed by surface charges can suppress the out-of-plane polarization in ultrathin ferroelectric films that could otherwise exhibit lower coercive fields and operate with lower power. Here, we unveil stabilization of a polar longitudinal optical (LO) mode in the n = 2 Ruddlesden–Popper family that produces out-of-plane ferroelectricity, persists under open-circuit boundary conditions, and is distinct from hyperferroelectricity. Our first-principles calculations show the stabilization of the LO mode is ubiquitous in chalcogenides and halides and relies on anharmonic trilinear mode coupling. We further show that the out-of-plane ferroelectricity can be predicted with a crystallographic tolerance factor, and we use these insights to design a room-temperature multiferroic with strong magnetoelectric coupling suitable for magneto-electric spin-orbit transistors.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Thermo-hydrogeomechanical modeling of vertical ground deformation during the operation of the Mutnovskii Geothermal Field

Vertical ground displacements at the Mutnovskii Geothermal Field were measured annually during the 2004–2013 period using a network of borehole markers. Three areas have been identified where the vertical displacements were different in character. Positive vertical deformation (2–5 mm/yr) was recorded in the middle of the Dachnyi Area in 2005–2006, giving way to a later stabilization. The North Test Area where the exhaust heat carrier was reinjected did not show any substantial deformation during the 2003–2006 period. This was followed by an uplift in 2006–2008 (6–7 mm/yr) and then by a subsidence (5–8 mm/yr) in 2009–2013. No vertical deformation worth mentioning was recorded in the Verkhne-Mutnovskii Area prior to 2008, but a rapid subsidence began at a rate of 6–18 mm/yr after 2008. Here, we used the TOUGH-FLAC software to analyze vertical ground deformation. This program is used to perform thermo-hydrogeomechanical (THM) modeling based on the previous TOUGH2 model. THM modeling can explain relative vertical deformation during the exploitation of the Mutnovskii Geothermal Field by separating the geothermal field into two compartments by the Osnovnoi fault, as the two have different tectonic settings and petrophysical properties.

15 GEOTHERMAL ENERGY↗
DOE OSTI2013

Computer–Based Procedures for Nuclear Power Plant Field Workers: Preliminary Results from Two Evaluation Studies

The Idaho National Laboratory and participants from the U.S. nuclear industry are collaborating on a research effort aimed to augment the existing guidance on computer-based procedure (CBP) design with specific guidance on how to design CBP user interfaces such that they support procedure execution in ways that exceed the capabilities of paper-based procedures (PBPs) without introducing new errors. Researchers are employing an iterative process where the human factors issues and interface design principles related to CBP usage are systematically addressed and evaluated in realistic settings. This paper describes the process of developing a CBP prototype and the two studies conducted to evaluate the prototype. The results indicate that CBPs may improve performance by reducing errors, but may increase the time it takes to complete procedural tasks.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2022

Terahertz nano-imaging of metal-insulator transition in Cd 2 Os 2 O 7

The osmate pyrochlore Cd 2 Os 2 O 7 supports an antiferromagnet insulator ground state with an all-in/all-out (AIAO) spin ordering at low temperature. Above 225 K, Cd 2 Os 2 O 7 becomes a paramagnetic metal whereas the mechanism of this metal-to-insulator transition (MIT) remains elusive. In this letter, we use cryogenic near-field technique operating at terahertz frequencies to study the evolution of low-energy response across the MIT. We observed a systematic variation of the magnitude of nano-THz signal across the transition, consistent with the trend in the direct-current conductivity. Conducting domain walls that dominate the nano-scale landscape of the conductivity of a closely related AIAO system Nd 2 Ir 2 O 7 are not apparent in Cd 2 Os 2 O 7

36 MATERIALS SCIENCE↗
DOE OSTI2020

Ozone Monitor (OZONE) Instrument Handbook

The primary measurement output from the Thermo Scientific Ozone Analyzer is the concentration of the analyte (O3) reported at 1-s resolution in units of ppbv in ambient air. Note that because of internal pneumatic switching limitations the instrument only makes an independent measurement every 4 seconds. Thus, the same concentration number is repeated roughly 4 times at the uniform, monotonic 1-s time base used in the AOS systems. Accompanying instrument outputs include sample temperatures, flows, chamber pressure, lamp intensities and a multiplicity of housekeeping information. There is also a field for operator comments made at any time while data is being collected.

47 OTHER INSTRUMENTATION↗
DOE OSTI2017

Pomona College Dreamers and Achievers Profile

As an undergraduate at Pomona, Carol Meyers ’00 enjoyed proofs and pure math, but she also had a hankering to solve real-world problems. This eventually led her to discover the field of operations research, in which she earned a PhD from MIT, and from there onto a career at a national laboratory. “National labs are great because they serve a role between academia and industry,” she says, “solving problems too large or too applied for academia, and insufficiently profitdriven for industry.” Her workplace, Lawrence Livermore National Laboratory, is home to the world’s largest laser, frequent home to the world’s fastest supercomputer, and the namesake to element 116 (Livermorium) on the periodic table. During her 10+ years at the laboratory Carol has worked in the areas of energy grid modernization, nuclear counterterrorism, cyber security, stockpile stewardship, and supercomputing, often as a consultant providing mathematical modeling and optimization expertise. Carol has two young kids and serves as co-chair of the New Moms’ Group at her workplace. “Being in a supportive community of moms has really helped me at work,” she says, “because let’s face it – moms know how to get things done!” “People talk a lot about the importance of networking, but this doesn’t have to mean starting technical discussions with strangers. The ability to bond with and relate to other people is far more important, and many women do this very well. Some of my best work networking connections have come through our employer-affiliated daycare.”

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2018

Pilot Demonstration Test Bed for ICC Desiccant Based Cooling System Final Report CRADA No. TSB-737-93

In this CRADA project, LLNL provided a field engineering, operation, and maintenance evaluation of ICC’s Desiccant Based Cooling (DBC) System by installing and activating an instrumented test bed in a real application at LLNL. LLNL was approached by two manufacturers of newly emerging heating, ventilation and air-conditioning (HVAC) equipment for technical assistance in obtaining engineering thermodynamic evaluation of their units. Despite promising improvements in technical HVAC performance and the elimination of environmentally sensitive materials (CFC’S), they experienced market resistance in the federal sector because of the need to develop a record of technical and reliability data. LLNL selected three sites as areas where the units could potentially produce significant improvements in energy consumption and healthy air conditions. This project covered the installation activation of the pilot test bed at LLNL. The collaborative effort provided statistical and requirements bases to make a valid evaluation of the units.

42 ENGINEERING↗
DOE OSTI2016

High Fidelity Modeling of Ionic Conduction in Solids

TlBr has the properties to become the leading radiation detection semiconductor. It has not yet been deployed due to a short lifetime of only hours to weeks. While the rapid structural deteriorations must come from ionic conduction under operating electrical fields, detailed aging mechanisms have not been understood. As a result, progress to extend lifetime has been limited despite extensive studies in the past. We have developed new atomistic simulation capabilities to enable study of ionic conduction under electrical fields. Our combined simulations and experiments indicate that dislocations in TlBr climb under electrical fields. This climb is the root cause for structural deterioration. Hence, we discovered new strengthening methods to reduce aging. Our new atomistic simulation approach can have broader impact on other Sandia programs including battery research. Our project results in 4 publications, a new invention, new LAMMPS capabilities, solution to mission relevant materials, and numerous presentations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Field Validation of a Building Operating System Platform

The U.S General Services Administration's (GSA's) Green Proving Ground program, in partnership with the National Renewable Energy Laboratory. completed a large pilot study of an Energy Management Information Systems (EMIS) with Automated System Optimization (ASO). Four test bed facilities, each with different building characteristics and systems, were chosen for the implementation of cloud-based EMIS with ASO. Depending on functionality, this tool can be extremely effective in energy management and energy optimization in buildings. The capabilities evaluated in the pilot ranged from energy savings and energy consumption predictions to evaluations of user acceptance, operability, and ease of installation. This report presents the methodology, lessons learned and best practices, and deployment recommendations for the GSA's portfolio of commercial office space, comprising more than 8,500 properties.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Introducing the 9500 Node Distribution Test System to Support Advanced Power Applications: An Operations-Focused Approach

The 9500 Node Test System is a representative section of distribution power system model developed as a part of the GridAPPS-D™ project, an effort funded by DOE as a part of the Grid Modernization Lab Consortium (GMLC) program. The test system was developed to fulfill a growing need to represent the rapidly evolving state of electric distribution systems by combining elements of legacy infrastructure systems, modern feeder topologies, and an anticipated future with smart grid technologies. It also provides a network model capable of supporting the simulation of operational scenarios such as the ones in a utility distribution control center. This test system allows the evaluation of the performance of advanced power applications in real-time, such as one that simulates the operations of an Advanced Distribution Management Systems (ADMS), Distributed Energy Resource Management Systems (DERMS), etc. in a Distribution control center. This model is an extension of the widely used IEEE 8500 Node Test Feeder and is currently being validated to become an IEEE test case to help increase adoption and widespread usage among both academia and industry. It is a full-size model representative of a section of a utility’s distribution system with multiple feeders fed from different substations. The model includes multiple distribution circuits, a sub-transmission system, multiple substations, behind the meter customer rooftop photovoltaics (PV), and multiple utility-scale distributed energy resources. To enable accurate simulations of operational scenarios, the 9500 Node Test System is designed to support procedure-based operations, with the ability to realistically demonstrate switching operations, feeder reconfiguration, adjustment of volt-var control equipment, dispatch of distributed generation, and response to planned and unplanned outages. The 9500 Node Test System includes three radial distribution feeders with 12.3 MVA of average load, consisting of both medium voltage and low voltage equipment each supplied by a different distribution substation. The three distribution feeders are connected to each other through Normally-Open switches which can be closed when needed to simulate restoration scenarios due to a fault. One feeder represents today’s grid with low penetration of customer-side renewables. The second represents a potential future grid with microgrids and 100% renewable penetration. The third has no customer generation resources, a district steam plant, and a utility-scale solar farm. The three diverse circuits were created to allow the simulation of both today’s situation as well as potential future scenarios. All three feeders have customers connected by low-voltage secondary triplex lines. This test system meets all requirements outlined in the report for creating a simulation environment that would enable discussion between key technical stakeholders as well as having the potential to accelerate operational application development and their subsequent testing and integration. The new model is a possible representation of what we believe the distribution grid may look like in the future: a high penetration of renewables, reconfigurable radial and mesh topology, numerous DERs, islanded microgrids, and significantly increased data and measurement density. The system supports both the solution of existing and newer algorithms but also enables the evaluation of applications in a realistic operational environment defined by task oriented procedural steps that represent the interaction between the control center operator and field personnel.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Support of domain decomposition-based solvers in Chroma

In multilevel integration, the correlation functions are decomposed into factors that depend only on fields localized into lattice subdomains so that they can be independently integrated. Although the standard formulation of the LQCD action is not local in the presence of fermions, past studies have shown approximations of the quark propagator and the fermionic determinant dependent on the gauge fields within specific subdomains can still be effective. We will present our current progress in supporting domain decomposition within Chroma, which is necessary for multilevel integration approaches. The efforts are focused on extending the code base to efficiently manipulate subdomains for lattice fields and operators and performing inversions and eigendecompositions within domains.

Alcalde, Eloy Romero↗
DOE OSTI2024

Domain decomposition efforts in Chroma

Multilevel integration is a technique used in lattice quantum chromodynamics (LQCD) simulations, where the correlation functions are decomposed into factors that depend only on fields localized within specific lattice subdomains. The approach significantly improves the efficiency of the calculations because the factors can be independently integrated. The main challenge in implementing multilevel integration is that the standard formulation of the LQCD action is not local in the presence of fermions. However, past studies have shown that approximations of the quark propagator and the fermionic determinant, which depend on the gauge fields within specific subdomains, can still be effective. We will present the current progress in supporting domain decomposition within the Chroma software, which is necessary for implementing multilevel integration approaches. Most of the efforts have focused on extending the Chroma code base to efficiently manipulate subdomains for lattice fields and operators, as well as performing inversions and eigendecompositions within these domains.

Alcalde, Eloy Romero↗
DOE OSTI2025

Impacts of Small-Scale Heterogeneity on Large-Scale Subsurface Flow

Discussion of NETL's CT scanning and core characterization capabilities, followed by a rapid review of several recent publications that utilize these capabilities to answer reservoir questions at the micro scale with relevance to field scale operations.

core characterization↗
DOE OSTI2022

Modeling Subsurface Performance of a Geothermal Reservoir Using Machine Learning

Geothermal power plants typically show decreasing heat and power production rates over time. Mitigation strategies include optimizing the management of existing wells—increasing or decreasing the fluid flow rates across the wells—and drilling new wells at appropriate locations. The latter is expensive, time-consuming, and subject to many engineering constraints, but the former is a viable mechanism for periodic adjustment of the available fluid allocations. In this study, we describe a new approach combining reservoir modeling and machine learning to produce models that enable such a strategy. Our computational approach allows us, first, to translate sets of potential flow rates for the active wells into reservoir-wide estimates of produced energy, and second, to find optimal flow allocations among the studied sets. In our computational experiments, we utilize collections of simulations for a specific reservoir (which capture subsurface characterization and realize history matching) along with machine learning models that predict temperature and pressure timeseries for production wells. We evaluate this approach using an “open-source” reservoir we have constructed that captures many of the characteristics of Brady Hot Springs, a commercially operational geothermal field in Nevada, USA. Selected results from a reservoir model of Brady Hot Springs itself are presented to show successful application to an existing system. In both cases, energy predictions prove to be highly accurate: all observed prediction errors do not exceed 3.68% for temperatures and 4.75% for pressures. In a cumulative energy estimation, we observe prediction errors that are less than 4.04%. A typical reservoir simulation for Brady Hot Springs completes in approximately 4 h, whereas our machine learning models yield accurate 20-year predictions for temperatures, pressures, and produced energy in 0.9 s. This paper aims to demonstrate how the models and techniques from our study can be applied to achieve rapid exploration of controlled parameters and optimization of other geothermal reservoirs.

15 GEOTHERMAL ENERGY↗
NASA NTRS1969

some comments on the use of infrared radiometry for remote atmospheric probing

A critique is presented of the lead paper by L.D. Kaplan on infrared radiometry. The following topics are analyzed: the extent to which the desirable thermal resolution of the lower troposphere can be achieved, the effects of complex cloud structure on infrared data, the effective weighting function if linearization is possible, remote sounding from below the atmosphere, first-guess fields and operational techniques to blend satellite infrared data into a mix of data from various meteorological systems, a simple inversion procedure for thermal structure, and problems arising from cloud and haze layers of variable amount and emissivity.

Godson, W. L.↗
NASA NTRS1974

Multispectral signatures in relation to ground control signature using nested sampling approach

The author has identified the following significant results. In a cooperative study with USGS personnel, it has been possible to detect a 1.5 by 1 mile anomaly on ERTS CCT data, in the pine-covered mountains of western Nevada. This anomalous area is about 3-5 times larger than that of the known geobotanical anomaly which lies centrally within the area. The site has been studied on the ground and bi-directional reflectances, relative to BaS04 obtained for 40 trees, using both in-vivo techniques (similar to cherry picker operations) and field determinations of cut branches. The anomaly can be seen best by color transparencies made from 5/4, 6/4, 7/4 ratioed digital data, the 3 ratios each being coded by one of 3 colors (blue, green, and red).

Lyon, R. J. P.↗
NASA NTRS1978

Preamplifier Noise in VLF Receivers

Noise specifications for junction field-effect transistors are presented in different ways depending on the particular semiconductor manufacturer. Arithmetic involved in converting these specifications to equivalent RMS noise in microvolts developed at the preamplifier input terminal is reviewed. These methods were useful for estimating the noise performance of high input impedance preamplifiers used with E-field antennas operating in the range of 1 KHz to 10 MHz. Both the JFET MPF-102 transistor and the COS/MOS CA3600 transistor array provided amplification for VLF receivers where the internally generated noise was well below the atmospheric noise level. The CA3600 transistor array provided better performance because of the more symmetrical complementary MOS transistor transfer characteristics than a single N-type biased JFET transistor. The CMOS amplifier resulted in self-compensating gain characteristics over a very wide temperature range from -55 to +125 C.

Burhans, R. W.↗