Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fuzzy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Multi-region Modeling of Daily Global Solar Radiation with Artificial Intelligence Ensemble

Solar radiation data are crucial for the design and evaluation of solar energy systems, climatic studies, water resources management, estimating crop productivity, etc. As so, for locations where direct measurements are not available, reliable models may be developed to estimate solar radiation from more readily available data. In this study, two artificial intelligence (AI)-based models including artificial neural network and adaptive neuro-fuzzy inference systems, three temperature-based empirical models including Meza–Varas, Hargreaves–Samani, and Chen, and a conventional multi-linear regression (MLR) model were employed for multi-region daily global solar radiation estimation for Iraq. To ensure appropriate selection of input variables, sensitivity analysis was conducted to determine the dominant parameters. Finally, two ensemble approaches, neural average ensemble and simple average ensemble, were applied to improve the performance of the single models. For this purpose, daily meteorological data of maximum temperature (T{sub max}), minimum temperature (T{sub min}), mean temperature (T{sub mean}), relative humidity (R{sub H}), and wind speed (U{sub 2}) were obtained from January 2006 to December 2016 from four major cities in Iraq representing, north, west, south, and east regions. The results revealed that temperatures (T{sub max}, T{sub mean}, T{sub min}) and relative humidity are the dominant parameters. While temperature-based empirical models and MLR model could be employed to achieve reliable results, AI-based models are superior in performance to other models. Also promising improvement in daily global solar radiation modeling could be achieved by model ensemble. The results of this study affirmed that the provided ensemble approaches can increase the performance of single models up to 19.19%, 7.59%, and 16.81% in training, validation, and testing steps, respectively.

58 GEOSCIENCES↗

Morphological Evolution of S-Phase in 2024 Aluminum under Tensile Creep at 448-463 K

The morphological evolution behavior of S-phase in 2024 aluminum alloy under uniaxial tensile creep test at 448 and 463 K under 175, 200 and 225 MPa was studied in detail by HRTEM. Results showed that the S-phase was arranged in the zigzag manner, similar to a zebra pattern, under tensile stress at 448-463 K. And it maintained cubic structure, remarkably grew along the tension direction under uniaxial tensile stress, but grew minimally perpendicular to the stress direction. Compared with applied stress, the temperature had a greater effect on the growth of S-phase. The length of S-phase reached 100 ± 20 nm after testing for 24 h at 448 K under 200 MPa and 200 ± 50 nm after testing for 18 h at 463 K under 175 MPa. The S-phase not only grew significantly in length but also coarsened at 463 K, the lamellar structure becoming fuzzy, which caused the alloy to enter the tertiary creep stage, unsuitable for creep-aging forming.

36 MATERIALS SCIENCE↗

Photon Reconstruction in the Belle II Calorimeter Using Graph Neural Networks

We present the study of a fuzzy clustering algorithm for the Belle II electromagnetic calorimeter using Graph Neural Networks. We use a realistic detector simulation including simulated beam backgrounds and focus on the reconstruction of both isolated and overlapping photons. We find significant improvements of the energy resolution compared to the currently used reconstruction algorithm for both isolated and overlapping photons of more than 30% for photons with energies E γ < 0.5 GeV and high levels of beam backgrounds. Overall, the GNN reconstruction improves the resolution and reduces the tails of the reconstructed energy distribution and therefore is a promising option for the upcoming high luminosity running of Belle II.

Calorimeter↗

Multi-criteria group decision-making based sustainability measurement of wastewater treatment processes

There are various processes which can be used for wastewater treatment (WT), and the selection of the most sustainable one among different processes is a hard task. This study aims at helping the decision-makers (DM) to address this by developing an intuitionistic fuzzy set (IFS) theory based group multi-attribute decision analysis (MADA) method. Ten criteria in environment, economy, society-politic, and technology dimensions were employed to achieve sustainability measurement (SM) of WT processes. The multi-criteria sustainability assessment method developed in this study allow different experts to attend the SM, and enable the participants to employ the natural language/words to depict their intuitionistic opinions. Accordingly, the proposed method can achieve group SM under uncertainties. An illustrative case including four processes for wastewater treatment, namely Anaerobic-Anoxic-Oxic (AAO) process, Triple Oxidation Ditch (TOD) process, Anaerobic single-ditch oxidation (ASD) process, and Sequencing batch reactor activated sludge process (SBR), has been studied, and the results reveal that this method can determine sustainability sequence of different WT processes.

54 ENVIRONMENTAL SCIENCES↗

Quantitative-qualitative assessments of environmental causal networks to support the DPSIR framework in the decision-making process

Highlights: • DSPIR framework is extended for supporting the decision-making process. • Environmental causal networks are used instead of unidirectional causalities. • Quantitative and qualitative data are combined to improve environmental assessments. • Decision-makers can choose management actions to reach favorable future scenarios. - Abstract: The DPSIR framework helps to identify and situate stressors, drivers and pressure variables within a dynamic environmental process composed of cause-effect relations. However, an important aspect related to its structural deficiency implies the use of unidirectional causalities between variables. In this work, we extend the capacities of the DPSIR framework by addressing three important points. Firstly, causal networks are built instead of unidirectional causalities, the former based on paths represented by sequences of cause-effect relations between involved variables. These paths are derived from the population growth as a driving force variable, along with CO{sub 2} emissions, waste, water and loss of vegetation cover as pressure variables. Trends of these paths are combined to determine and quantitatively assess a global environmental state trend whose impacts on the environment require corrective management actions as a response. Secondly, quantitative assessments of environmental trends are transformed into fuzzy-qualitative data to facilitate their interpretation. Thirdly, a method based on weighted environmental management actions is presented to decision-makers who aspire to change current path trends in order to approach desirable scenarios similar to those put forth by the OECD outlook towards 2030. The results obtained applying this framework to the State of Morelos, México, show that it can be a useful support tool in the selection and monitoring of management actions capable of reaching favorable environmental trends.

54 ENVIRONMENTAL SCIENCES↗

Play-fairway analysis for geothermal resources and exploration risk in the Modoc Plateau region

The region surrounding the Modoc Plateau, encompassing parts of northeastern California, southern Oregon, and northwestern Nevada, lies at an intersection between two tectonic provinces; the Basin and Range province and the Cascade volcanic arc. Both of these provinces have substantial geothermal resource base and resource potential. Geothermal systems with evidence of magmatic heat, associated with Cascade arc magmatism, typify the western side of the region. Systems on the eastern side of the region appear to be fault controlled with heat derived from high crustal heat flow, both of which are typical of the Basin and Range. As it has the potential to host Cascade arc-type geothermal resources, Basin and Range-type geothermal resources, and/or resources with characteristics of both provinces, and because there is relatively little current development, the Modoc Plateau region represents an intriguing potential for undiscovered geothermal resources. It remains unclear however, what specific set(s) of characteristics are diagnostic of Modoc-type geothermal systems and how or if those characteristics are distinct from Basin and Range-type or Cascade arc-type geothermal systems. In order to evaluate the potential for undiscovered geothermal resources in the Modoc area, we integrate a wide variety of existing data in order to evaluate geothermal resource potential and exploration risk utilizing ‘play-fairway’ analysis. Here, we consider that the requisite parameters for hydrothermal circulation are: 1) heat that is sufficient to drive circulation, and 2) permeability that is sufficient to allow for fluid circulation in the subsurface. We synthesize data that indicate the extent and distribution of these parameters throughout the Modoc region. ‘Fuzzy logic’ is used to incorporate expert opinion into the utility of each dataset as an indicator of either heat or permeability, and thus geothermal favorability. The results identify several geothermal prospects, areas that are highly favorable for the occurrence of both heat and permeability. These are also areas where there is sufficient data coverage, quality, and consistency that the exploration risk is relatively low. These unknown, undeveloped, and under-developed prospects are well-suited for continued exploration efforts. The results also indicate to what degree the two ‘play-types,’ i.e. Cascade arc-type or Basin and Range-type, apply to each of the geothermal prospects, a useful guide in exploration efforts.

15 GEOTHERMAL ENERGY↗

Prediction of the thickness of the compensator filter in radiation therapy using computational intelligence

In this study, artificial neural networks (ANNs) and adaptive neuro-fuzzy inference system (ANFIS) are investigated to predict the thickness of the compensator filter in radiation therapy. In the proposed models, the input parameters are field size (S), off-axis distance, and relative dose (D/D{sub 0}), and the output is the thickness of the compensator. The obtained results show that the proposed ANN and ANFIS models are useful, reliable, and cheap tools to predict the thickness of the compensator filter in intensity-modulated radiation therapy.

61 RADIATION PROTECTION AND DOSIMETRY↗

Optimizing and Exploring Untapped Micro-Hydro Hybrid Systems: a Multi-Objective Approach for Crystal Lake as a Large-Scale Energy Storage Solution

Increasing electricity demand and concerns about climate change and fossil fuel consumption have highlighted the importance of renewable energy resources and storage systems. This paper proposes a method for exploring untapped pumped hydro storage potentials to accommodate intermittent renewable energy generation profiles. Hourly measured data from 2022 in Benzie County, Michigan, United States, were gathered for system sizing and a thorough, realistic analysis. By employing the multi-objective grey wolf optimization algorithm, we formulated optimal sizing and energy-management strategies for three different scenarios. Unlike similar studies, the 3rd with triple objective functions (OFs) scenario aims to maximize both reliability and ecological OFs while minimizing the cost OF. It has shown promising results with multiple solutions, considering economic, environmental, and reliability factors. A case study conducted in Crystal Lake, Michigan, revealed that although Crystal Lake would function only as a micro-hydro power facility, it is a promising and huge storage unit with a substantial storage capacity of around 14.9734GWh. The system investigated is significant in the USA due to its rapid deployment capabilities, minimal construction requirements, and ease of integration with the distribution grid. The fuzzy logic method was employed to identify the best non-dominant solution among the other solutions. Furthermore, these outcomes include a notably low levelized cost of energy at 0.046147$/kWh, a robust index of reliability of 99.705%, and a significant reduction in CO₂ emissions amounting to 7.9142×10 3 tons/year, when considering the triple OFs. The paper’s methodology provides valuable insights for regions aiming to utilize renewable energy from untapped storage sources.

13 HYDRO ENERGY↗

Prediction of global solar irradiance based on time series analysis: Application to solar thermal power plants energy production planning

Due to strong increase of solar power generation, the predictions of incoming solar energy are acquiring more importance. Photovoltaic and solar thermal are the main sources of electricity generation from solar energy. In the case of solar thermal energy plants with storage energy system, its management and operation need reliable predictions of solar irradiance with the same temporal resolution as the temporal capacity of the back-up system. These plants can work like a conventional power plant and compete in the energy stock market avoiding intermittence in electricity production. This work presents a comparisons of statistical models based on time series applied to predict half daily values of global solar irradiance with a temporal horizon of 3 days. Half daily values consist of accumulated hourly global solar irradiance from solar raise to solar noon and from noon until dawn for each day. The dataset of ground solar radiation used belongs to stations of Spanish National Weather Service (AEMet). The models tested are autoregressive, neural networks and fuzzy logic models. Due to the fact that half daily solar irradiance time series is non-stationary, it has been necessary to transform it to two new stationary variables (clearness index and lost component) which are used as input of the predictive models. Improvement in terms of RMSD of the models essayed is compared against the model based on persistence. The validation process shows that all models essayed improve persistence. The best approach to forecast half daily values of solar irradiance is neural network models with lost component as input, except Lerida station where models based on clearness index have less uncertainty because this magnitude has a linear behaviour and it is easier to simulate by models. (author)

14 SOLAR ENERGY↗

A multi-objective approach to solid waste management

The issue addressed in this paper consists in the localization and dimensioning of transfer stations, which constitute a necessary intermediate level in the logistic chain of the solid waste stream, from municipalities to the incinerator. Contextually, the determination of the number and type of vehicles involved is carried out in an integrated optimization approach. The model considers both initial investment and operative costs related to transportation and transfer stations. Two conflicting objectives are evaluated, the minimization of total cost and the minimization of environmental impact, measured by pollution. The design of the integrated waste management system is hence approached in a multi-objective optimization framework. To determine the best means of compromise, goal programming, weighted sum and fuzzy multi-objective techniques have been employed. The proposed analysis highlights how different attitudes of the decision maker towards the logic and structure of the problem result in the employment of different methodologies and the obtaining of different results. The novel aspect of the paper lies in the proposal of an effective decision support system for operative waste management, rather than a further contribution to the transportation problem. The model was applied to the waste management of optimal territorial ambit (OTA) of Palermo (Italy).

09 BIOMASS FUELS↗

Microtron Modelling and Control

The article describes the design of the mathematical model and automatic control system of the microtron (high frequency cyclic electron accelerator). This type of accelerator was controlled manually till now. The critical values have been set up empirically on the basis of the previous operational experiences. The designed automatic control system with fuzzy controller should increase the accelerated electrons current value and improve the beam stability.

97 MATHEMATICS AND COMPUTING↗

Intelligent-based Structural Damage Detection Model

This paper presents the application of a novel Artificial Neural Network (ANN) model for the diagnosis of structural damage. The ANN model, denoted as the GRNNFA, is a hybrid model combining the General Regression Neural Network Model (GRNN) and the Fuzzy ART (FA) model. It not only retains the important features of the GRNN and FA models (i.e. fast and stable network training and incremental growth of network structure) but also facilitates the removal of the noise embedded in the training samples. Structural damage alters the stiffness distribution of the structure and so as to change the natural frequencies and mode shapes of the system. The measured modal parameter changes due to a particular damage are treated as patterns for that damage. The proposed GRNNFA model was trained to learn those patterns in order to detect the possible damage location of the structure. Simulated data is employed to verify and illustrate the procedures of the proposed ANN-based damage diagnosis methodology. The results of this study have demonstrated the feasibility of applying the GRNNFA model to structural damage diagnosis even when the training samples were noise contaminated.

97 MATHEMATICS AND COMPUTING↗

Uncertainty Modeling of Pollutant Transport in Atmosphere and Aquatic Route Using Soft Computing

Hazardous radionuclides are released as pollutants in the atmospheric and aquatic environment (ATAQE) during the normal operation of nuclear power plants. Atmospheric and aquatic dispersion models are routinely used to assess the impact of release of radionuclide from any nuclear facility or hazardous chemicals from any chemical plant on the ATAQE. Effect of the exposure from the hazardous nuclides or chemicals is measured in terms of risk. Uncertainty modeling is an integral part of the risk assessment. The paper focuses the uncertainty modeling of the pollutant transport in atmospheric and aquatic environment using soft computing. Soft computing is addressed due to the lack of information on the parameters that represent the corresponding models. Soft-computing in this domain basically addresses the usage of fuzzy set theory to explore the uncertainty of the model parameters and such type of uncertainty is called as epistemic uncertainty. Each uncertain input parameters of the model is described by a triangular membership function.

54 ENVIRONMENTAL SCIENCES↗

Evidence Theory Based Uncertainty Quantification in Radiological Risk due to Accidental Release of Radioactivity from a Nuclear Power Plant

Consequence of the accidental release of radioactivity from a nuclear power plant is assessed in terms of exposure or dose to the members of the public. Assessment of risk is routed through this dose computation. Dose computation basically depends on the basic dose assessment model and exposure pathways. One of the exposure pathways is the ingestion of contaminated food. The aim of the present paper is to compute the uncertainty associated with the risk to the members of the public due to the ingestion of contaminated food. The governing parameters of the ingestion dose assessment model being imprecise, we have approached evidence theory to compute the bound of the risk. The uncertainty is addressed by the belief and plausibility fuzzy measures.

54 ENVIRONMENTAL SCIENCES↗

New Phenomena in NC Field Theory and Emergent Spacetime Geometry

We give a brief review of two nonperturbative phenomena typical of noncommutative field theory which are known to lead to the perturbative instability known as the UV-IR mixing. The first phenomena concerns the emergence/evaporation of spacetime geometry in matrix models which describe perturbative noncommutative gauge theory on fuzzy backgrounds. In particular we show that the transition from a geometrical background to a matrix phase makes the description of noncommutative gauge theory in terms of fields via the Weyl map only valid below a critical value g*. The second phenomena concerns the appearance of a nonuniform ordered phase in noncommutative scalar {phi}{sup 4} field theory and the spontaneous symmetry breaking of translational/rotational invariance which happens even in two dimensions. We argue that this phenomena also originates in the underlying matrix degrees of freedom of the noncommutative field theory. Furthermore it is conjectured that in addition to the usual WF fixed point at {theta} = 0 there must exist a novel fixed point at {theta} = {infinity} corresponding to the quartic hermitian matrix model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

An application of different dioids in public key cryptography

Dioids provide a natural framework for analyzing a broad class of discrete event dynamical systems such as the design and analysis of bus and railway timetables, scheduling of high-throughput industrial processes, solution of combinatorial optimization problems, the analysis and improvement of flow systems in communication networks. They have appeared in several branches of mathematics such as functional analysis, optimization, stochastic systems and dynamic programming, tropical geometry, fuzzy logic. In this paper we show how to involve dioids in public key cryptography. The main goal is to create key – exchange protocols based on dioids. Additionally the digital signature scheme is presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Towards intelligent diagnostic system employing integration of mathematical and engineering model

The development of medical diagnostic system has been one of the main research fields during years. The goal of the medical diagnostic system is to place a nosological system that could ease the diagnostic evaluation normally performed by scientists and doctors. Efficient diagnostic evaluation is essentials and requires broad knowledge in order to improve conventional diagnostic system. Several approaches on developing the medical diagnostic system have been designed and tested since the earliest 60s. Attempts on improving their performance have been made which utilizes the fields of artificial intelligence, statistical analyses, mathematical model and engineering theories. With the availability of the microcomputer and software development as well as the promising aforementioned fields, medical diagnostic prototypes could be developed. In general, the medical diagnostic system consists of several stages, namely the 1) data acquisition, 2) feature extraction, 3) feature selection, and 4) classifications stages. Data acquisition stage plays an important role in converting the inputs measured from the real world physical conditions to the digital numeric values that can be manipulated by the computer system. One of the common medical inputs could be medical microscopic images, radiographic images, magnetic resonance image (MRI) as well as medical signals such as electrocardiogram (ECG) and electroencephalogram (EEG). Normally, the scientist or doctors have to deal with myriad of data and redundant to be processed. In order to reduce the complexity of the diagnosis process, only the significant features of the raw data such as peak value of the ECG signal or size of lesion in the mammogram images will be extracted and considered in the subsequent stages. Mathematical models and statistical analyses will be performed to select the most significant features to be classified. The statistical analyses such as principal component analysis and discriminant analysis as well as mathematical model of clustering technique have been widely used in developing the medical diagnostic systems. The selected features will be classified using mathematical models that embedded engineering theory such as artificial intelligence, support vector machine, neural network and fuzzy-neuro system. These classifiers will provide the diagnostic results without human intervention. Among many publishable researches, several prototypes have been developed namely NeuralPap, Neural Mammo, and Cervix Kit. The former system (NeuralPap) is an automatic intelligent diagnostic system for classifying and distinguishing between the normal and cervical cancerous cells. Meanwhile, the Cervix Kit is a portable Field-programmable gate array (FPGA)-based cervical diagnostic kit that could automatically diagnose the cancerous cell based on the images obtained during sampling test. Besides the cervical diagnostic system, the Neural Mammo system is developed to specifically aid the diagnosis of breast cancer using a fine needle aspiration image.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fault detection and analysis in nuclear research facility using artificial intelligence methods

In this article, an online detection of transducer and actuator condition is discussed. A case study is on the reading of area radiation monitor (ARM) installed at the chimney of PUSPATI TRIGA nuclear reactor building, located at Bangi, Malaysia. There are at least five categories of abnormal ARM reading that could happen during the transducer failure, namely either the reading becomes very high, or very low/ zero, or with high fluctuation and noise. Moreover, the reading may be significantly higher or significantly lower as compared to the normal reading. An artificial neural network (ANN) and adaptive neuro-fuzzy inference system (ANFIS) are good methods for modeling this plant dynamics. The failure of equipment is based on ARM reading so it is then to compare with the estimated ARM data from ANN/ ANFIS function. The failure categories in either ‘yes’ or ‘no’ state are obtained from a comparison between the actual online data and the estimated output from ANN/ ANFIS function. It is found that this system design can correctly report the condition of ARM equipment in a simulated environment and later be implemented for online monitoring. This approach can also be extended to other transducers, such as the temperature profile of reactor core and also to include other critical actuator conditions such as the valves and pumps in the reactor facility provided that the failure symptoms are clearly defined.

42 ENGINEERING↗