Search NASA⌕ Search

SEARCH · Search NASA

Results for “Identification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Tug ground operations - An approach to early identification of operational impacts

An approach to early identification of operational requirements is discussed together with an assessment of the impact of these requirements on the development and acquisition phase of a program. The approach is applied to the Space Tug program. Some of the more salient results of the Tug Fleet and Ground Operations Schedules and Controls study performed under a NASA/Marshall Space Flight Center contract are provided. Ground-processing requirements and flows are presented, including a summary of facility requirements, timelines, activities and options/contingency-provision recommendations. Programmatic recommendations resulting from the study are presented in areas of payload integration, activation requirements, fleet utilization, fleet sizing, costs, and WTR delta requirement for the Tug.

Best, J. L.↗
NASA NTRS1975

Optimal policies for identification of stochastic linear systems

The problem of designing closed-loop policies for identification of multiinput-multioutput linear discrete-time systems with random time-varying parameters is considered in this paper using a Bayesian approach. A sensitivity index gives a measure of performance for the closed-loop laws. The computation of the optimal laws is shown to be nontrivial, an exercise in stochastic control, but open-loop, affine, and open-loop feedback optimal inputs are shown to yield tractable problems. Numerical examples are given. For time-invariant systems, the criterion considered is shown to be related to the trace of the information matrix associated with the system.

Lopez-Toledo, A. A.↗
NASA NTRS1975

Ultraviolet solar identifications based on extended absorption series observed in the laboratory spectrum of Si I

The absorption spectrum of Si I in the wavelength region between 1500 and 1900 A has been photographed at high resolution. The silicon vapor was produced in a 122-cm-long King furnace at 1800 to 2300 C. Forty-two Rydberg series have been observed from the ground state terms 3p(2)3P and 1D to terms associated with the 3pns and 3pnd configurations. All of the series from these configurations with J less than 4 have been extended with the 3pnd 3D(3) levels reaching n = 56. Numerous perturbations have been observed. This laboratory work has provided the basis for extending the identification of silicon lines in the solar spectrum. Nearly all lines found in the laboratory spectrum are also found in rocket spectrograms of the solar chromosphere. More than 300 lines have been attributed to Si I. The excellent correlation between laboratory and solar Si I lines is illustrated.

Moore, C. E.↗
NASA NTRS1976

A multispectral cloud type identification method developed for tropical ocean areas with Nimbus-3 MRIR measurements

A four-channel multispectral cloud type identification technique is developed on the basis of Nimbus-3 Resolution Infrared Radiometer (MRIR) measurements, with the four channels being spectrally located at 0.2-4.0, 6.5-7, 10-11, and 20-23 microns. The technique requires the use of a radiative transfer model with information on the vertical temperature and moisture profiles and climatological knowledge of the upper boundaries of cloud surfaces associated with expected cloud types within a given area. Experimental verification of the technique indicates that deletion of the 20-23 micron channel has no adverse effect on method capability, and that the 6.5-7 micron channel alone is well suited for successful mapping of the areas where cirrus is reasonably dense, while indicating the regions where cirrus is not present.

Shenk, W. E.↗
NASA NTRS1976

Rotor dynamic state and parameter identification from simulated forward flight transients, part 1

State and parameter identifications from simulated forward flight blade flapping measurements are presented. The transients were excited by progressing cyclic pitch stirring or by hub stirring with constant stirring acceleration. Rotor dynamic inflow models of varying degree of sophistication were used from a one parameter inflow model (equivalent Lock number) to an eight parameter inflow model. The maximum likelihood method with assumed fixed measurement error covariance matrix was applied. The rotor system equations for both fixed hub and tilting hub are given. The identified models were verified by comparing true responses with predicted responses. An optimum utilization of the simulated measurement data can be defined. From the numerical results it can be anticipated that brief periods of either accelerated cyclic pitch stirring or of hub stirring are sufficient to extract with adequate accuracy up to 8 rotor dynamic inflow parameters plus the blade Lock number from the transients.

Hohenemser, K. H.↗
NASA NTRS1975

Methods Studies on System Identification from Transient Rotor Tests

Some of the more important methods are discussed that have been used or proposed for aircraft parameter identification. The methods are classified into two groups: Equation error or regression estimates and Bayesian estimates and their derivatives that are based on probabilistic concepts. In both of these two groups the cost function can be optimized either globally over the entire time span of the transient, or sequentially, leading to the formulation of optimum filters. Identifiability problems and the validation of the estimates are briefly outlined, and applications to lifting rotors are discussed.

Hohenemser, K. H.↗
NASA NTRS1977

Crop identification and area estimation over large geographic areas using LANDSAT MSS data

The author has identified the following significant results. LANDSAT MSS data was adequate to accurately identify wheat in Kansas; corn and soybean estimates in Indiana were less accurate. Computer-aided analysis techniques were effectively used to extract crop identification information from LANDSAT data. Systematic sampling of entire counties made possible by computer classification methods resulted in very precise area estimates at county, district, and state levels. Training statistics were successfully extended from one county to other counties having similar crops and soils if the training areas sampled the total variation of the area to be classified.

Bauer, M. E.↗
NASA NTRS1977

Application of system identification to analytic rotor modeling from simulated and wind tunnel dynamic test data, part 2

An introduction to aircraft state and parameter identification methods is presented. A simplified form of the maximum likelihood method is selected to extract analytical aeroelastic rotor models from simulated and dynamic wind tunnel test results for accelerated cyclic pitch stirring excitation. The dynamic inflow characteristics for forward flight conditions from the blade flapping responses without direct inflow measurements were examined. The rotor blades are essentially rigid for inplane bending and for torsion within the frequency range of study, but flexible in out-of-plane bending. Reverse flow effects are considered for high rotor advance ratios. Two inflow models are studied; the first is based on an equivalent blade Lock number, the second is based on a time delayed momentum inflow. In addition to the inflow parameters, basic rotor parameters like the blade natural frequency and the actual blade Lock number are identified together with measurement bias values. The effect of the theoretical dynamic inflow on the rotor eigenvalues is evaluated.

Hohenemser, K. H.↗
NASA NTRS1977

Identification of 180 million years old, probably unchanged melanine

The comparison of the infrared spectra of recent sepia melanine and of the content of the ink sac of fossilized cuttlefish indicates that the 180 million years old substance is unchanged melanine. Both substances behave identically on heating. Other procedures for identification of melanine are surveyed critically.

Beyermann, K.↗
NASA NTRS1976

Elemental composition of airborne particulates and source identification - An extensive one year survey

Concentrations of 60 chemical elements in the airborne particulate matter were measured at 16 sites in Cleveland, OH over a 1 year period during 1971 and 1972 (45 to 50 sampling days). Analytical methods used included instrumental neutron activation, emission spectroscopy, and combustion techniques. Uncertainties in the concentrations associated with the sampling procedures, the analytical methods, the use of several analytical facilities, and samples with concentrations below the detection limits are evaluated in detail. The data are discussed in relation to other studies and source origins. The trace constituent concentrations as a function of wind direction are used to suggest a practical method for air pollution source identification.

King, R. B.↗
NASA NTRS1976

A spectral identification technique for adaptive attitude control and pointing of the Space Telescope

The Space Telescope is a 2.4 m class aperture optical telescope having near-diffraction-limited performance. It will be placed into earth orbit by 1980 via the Space Shuttle. The problem considered is how to achieve negligible degradation of the astronomy imaging capability (to 0.005 arc second) due to smearing by pointing motions during observations. Initially, pointing instability sources were identified and a linear stability was used to assess the magnitude of elastic body modes and to design control system compensation regions necessary for subsequent adaptive control. A spectral identification technique for this adaptive attitude control and pointing has been investigated that will alleviate requirements for comprehensive dynamic ground testing. Typical all-digital simulation results describing motions of the telescope line of sight are presented.

Teuber, D. L.↗
NASA NTRS1977

Remote sensing applied to geological mapping; comparative geomorphology and identification of mineral zones of zinc and lead in the region of Vazante, MG

The author has identified the following significant results. Results showed that the black and white aerial photographs and the color infrared transparencies were efficient for mapping of three lithological units of the Paraopeba formation and for mineralized zones identification, respectively. Multispectral transparencies of I2S made it easier to separate dolomites, which were the rocks conditioning zinc and lead mineralization. Statistical analysis of morphometric indexes obtained from black and white photographs and topographic charts showed significant difference among three lithological units of Paraopeba formation which can be defined as Crest, Hilly, and Karstic reliefs.

Nascimento, F. S. D.↗
NASA NTRS1977

Prediction and identification of some transitions associated with 2p/k/ and 2p/k-1/3l configurations in six-, seven- and eight-electron ions

Calculations of fine structure and transition probabilities, using the superstructure program developed at University College London, have been carried out for the 2p(k) and 2p(k-1)3l configurations of ions with six, seven, or eight electrons. The predicted line patterns are compared with existing observations for silicon, sulfur, argon, and calcium to yield some new identifications in laboratory and solar spectra and to indicate some transitions, as yet unobserved, that may be of observational importance.

Kastner, S. O.↗
NASA NTRS1977

Identification of water frost on Callisto

A description is presented of broadband (J, K, and L) and narrowband (3.0-3.8 micrometers) observations of Ganymede and Callisto which were made on the nights of November 7 and November 29, 1976 with a 28-inch infrared telescope. Based on the previous identification of water frost on the surface of Ganymede from shorter wavelength data, it is concluded that there is also water frost on the surface of Callisto, taking into account the presence of similar bands for both satellites in the spectral range from 3 to 4 micrometers.

Lebofsky, L. A.↗
NASA NTRS1977

New frequency domain methods for system identification

This paper presents two new techniques for frequency domain identification of linear system parameters. The first technique uses the instrumental variables approach. The frequency domain formulation is shown to give a considerable insight into the selection of efficient and convergent instrumental variables. The new maximum likelihood formulation affords simplier numerical solution and provides a way to select parameter starting values in the gradient based optimization method.

Gupta, N. K.↗
NASA NTRS1978

Dynamic response and input identification of MDOF structures subjected to coupled random vector inputs

A method of random dynamic analysis is presented which is based on the classical approach applied to a discretized structure. The method assumes that the system identification is available in the form of natural modes and frequencies. These modes and frequencies can be found from either available solutions or approximately from finite element programs. A computer program has been developed to perform the computations required in the analysis. All computations are performed with transformed modal variables, which results in significant economy since the number of modal degrees of freedom is almost always less than the number of physical degrees of freedom. The program computes the response to force and base inputs which are statistically coupled. A method is also presented for predicting one of the inputs if the second input and the acceleration response at a point on the structure are known. Finally, results are presented for the random response of a rectangular plate subjected to a random pressure and a random base input. The inputs are considered individually and with various degrees of statistical coupling.

Ocallahan, J. C.↗