Search NASA⌕ Search

SEARCH · Search NASA

Results for “Layout”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Millimeter-wave interferometry and far-forward scattering for density fluctuation measurements on LTX- β

The λ ≈ 1 mm (f = 288 GHz) interferometer for the Lithium Tokamak Experiment- β (LTX- β ) will use a chirped-frequency source and a centerstack-mounted retro-reflector mirror to provide electron line density measurements along a single radial chord at the midplane. The interferometer is unique in the use of a single source (narrow-band chirped-frequency interferometry) and a single beam splitter for separating and recombining the probe and reference beams. The current work provides a documentation of the interferometry hardware and evaluates the capabilities of the system as a far-forward collective scattering diagnostic. As such, the current optical setup is estimated to have a detection range of 0.4 ≲ k ⊥ ≲ 1.7 cm –1 , while an improved layout will extend the upper k ⊥ limit to ~3 cm –1 . Measurements with the diagnostic on LTX are presented, showing interferometry results and scattered signal data. Furthermore, these diagnostics are expected to provide routine measurements on LTX- β for high frequency coherent density oscillations (e.g., Alfvénic modes during neutral beam injection) as well as for broadband turbulence.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

The multi-spectral imaging diagnostic

The Multi-Spectral Imaging system is a new diagnostic that captures simultaneous spectrally filtered images from a common line of sight while maintaining a large étendue and high throughput. Simultaneously imaging several atomic line intensities may enable numerous measurement techniques. By making a novel modification of a polychromator layout, the MSI sequentially filters and focuses images onto commercial CMOS cameras while exhibiting minimal vignetting and aberrations. A four-wavelength system was initially installed and tested on Alcator C-Mod and subsequently moved to TCV. The images are absolutely calibrated and spatially registered enabling 2D mappings of atomic line ratios and absolute line intensities. The spectral transmission of the optical system was calibrated using an integrating sphere of known radiance. The images are inverted by cross-referencing points on TCV with a computer-aided design (CAD) model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

A new approach to vibrational sum frequency generation spectroscopy using near infrared pulse shaping

In this work, we have developed a multipurpose vibrational sum frequency generation (vSFG) spectrometer that is uniquely capable of probing a broad range of chemical species, each requiring different experimental conditions, without optical realignment. Here, we take advantage of arbitrary near infrared (NIR) waveform generation using a 4 f -pulse shaper equipped with a 2D spatial light modulator (SLM) to tailor upconversion pulses to meet sample dependent experimental requirements. This report details the experimental layout, details of the SLM calibration and implementation, and the intrinsic benefits/limitations of this new approach to vSFG spectroscopy. We have demonstrated the competency of this spectrometer by achieving an ~3-fold increase in spectral resolution compared to conventional spectrometers by probing the model dimethyl sulfoxide/air interface. We also show the ability to suppress nonresonant background contributions from electrode interfaces using time delayed asymmetric waveforms that are generated by the NIR pulse shaper. Lastly, it is expected that this advancement in instrumentation will broaden the types of samples researchers can readily study using nonlinear surface specific spectroscopies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

A possible low-energy positron source at Jefferson Lab

Jefferson Lab is interested in the production of positrons for nuclear physics applications but also has the capability of producing low energy positrons that could be used for positron annihilation studies. Using the LERF accelerator at the Thomas Jefferson National Accelerator Facility, it is possible to produce a high brightness source of very low-energy positrons. The accelerator requirements are well within the capabilities of the installed hardware. For these experiments, we only need run at up to 100 MeV. A challenge is the production of the positrons. The gamma converter must be able to absorb the 50 kW of beam power that the linac delivers. At this low an energy, the converter, though challenging, is feasible. The transport of the low energy positrons from the production target to the next stage, where the energy is reduced even further, must have a very large acceptance to be able to efficiently transport the flux of positrons from the positron production target to the moderator. We propose to accomplish such a transport by means of a guiding solenoidal field with a novel endcap design. Finally, it is in principle possible to produce a spin polarized beam by filtering the positrons at low energy. The layout of the proposed device will be described in this presentation.

Benson, Stephen↗
DOE OSTI2020

Demonstration of transmission high energy electron microscopy

Charged particle radiography with 800 MeV protons has been used for decades at LANL and developed around the world to study dynamic material properties. Recently, charged particle radiography has been demonstrated with the use of high-energy electrons. Because of the difference in the mass of the electron compared to the mass of the proton, the radiographic processes are substantially different and well suited to the study of fast dynamic processes in relatively thin systems. This presentation will show the layout required for such measurements, along with data collected from this recent demonstration performed with 14 GeV electrons generated at the SLAC National Accelerator Laboratory. The radiographic performance for flash measurements will be presented, along with the limitations of this measurement technique.

Merrill, F. E.↗
DOE OSTI2020

Comparison of modular analytical wake models to the Lillgrund wind plant

Efficient and accurate wake models are required for wind plant performance modeling and the suite of engineering processes that support wind plant layout, control, and monitoring. Although many analytical and engineering wake models with low computational costs have been proposed, their ability to represent the power production of large wind plants in a wide range of atmospheric conditions is not completely understood. The following validation study reviews the underlying theory for analytical wake models, outlines quality control procedures for observational data, and compares model results with observational data from the Lillgrund Wind Plant. Lillgrund makes a valuable case study for wake modeling because of its regular arrangement and the relatively close spacing of constituent wind turbines, which lead to regular and significant wake interactions within the wind plant and the development of deep array flow conditions. Formulations for the velocity deficit, wake-added turbulence, and wake superposition methods are considered in a modular sense, yielding many possible configurations to represent wind turbine wakes, of which seven are examined in detail. Velocity deficit models that account for flow conditions in the near wake are better able to reproduce power production for wind turbines in the transitional region of the wind plant, where wind turbines experience as many as five wakes from upstream turbines. Finally, in the deep array, where power production reaches asymptotic values and wake statistics become quasi-periodic, wake superposition schemes become the largest driver in error reduction; using the linear or maximum wake superposition methods can reduce the relative root mean square error by as much as 40% in the deep array.

17 WIND ENERGY↗
DOE OSTI2021

Quantum Chemistry Common Driver and Databases (QCDB) and Quantum Chemistry Engine (QCEngine): Automation and interoperability among computational chemistry programs

We report that community efforts in the computational molecular sciences (CMS) are evolving toward modular, open, and interoperable interfaces that work with existing community codes to provide more functionality and composability than could be achieved with a single program. The Quantum Chemistry Common Driver and Databases (QCDB) project provides such capability through an application programming interface (API) that facilitates interoperability across multiple quantum chemistry software packages. In tandem with the Molecular Sciences Software Institute and their Quantum Chemistry Archive ecosystem, the unique functionalities of several CMS programs are integrated, including CFOUR, GAMESS, NWChem, OpenMM, Psi4, Qcore, TeraChem, and Turbomole, to provide common computational functions, i.e., energy, gradient, and Hessian computations as well as molecular properties such as atomic charges and vibrational frequency analysis. Both standard users and power users benefit from adopting these APIs as they lower the language barrier of input styles and enable a standard layout of variables and data. These designs allow end-to-end interoperable programming of complex computations and provide best practices options by default.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Engineering local strain for single-atom nuclear acoustic resonance in silicon

Mechanical strain plays a key role in the physics and operation of nanoscale semiconductor systems, including quantum dots and single-dopant devices. In this report we describe the design of a nanoelectronic device, where a single nuclear spin is coherently controlled via nuclear acoustic resonance (NAR) through the local application of dynamical strain. The strain drives spin transitions by modulating the nuclear quadrupole interaction. We adopt an AlN piezoelectric actuator compatible with standard silicon metal–oxide–semiconductor processing and optimize the device layout to maximize the NAR drive. We predict NAR Rabi frequencies of order 200 Hz for a single 123Sb nucleus in a wide region of the device. Spin transitions driven directly by electric fields are suppressed in the center of the device, allowing the observation of pure NAR. Using electric field gradient-elastic tensors calculated by the density-functional theory, we extend our predictions to other high-spin group-V donors in silicon and to the isoelectronic 73Ge atom.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Faraday-effect polarimetry for current profile measurement in the tokamak plasma edge

Toroidal current profile measurements in the tokamak plasma edge are critical for fusion plasma physics research and model validation. A three-wave Faraday-effect polarimeter-interferometer with a sub-centimeter spatial resolution is proposed on the DIII-D tokamak to determine the edge current profile via Abel inversion. By using probe beams with 316 µm wavelength, a low-field-side, vertical-view, single-pass optical layout covering the plasma edge region (R = 2.15–2.27 m) is assessed. Measurements with no greater than 0.1° polarimetric systematic uncertainty, no greater than 0.01° polarimetric root-mean-square noise (1 kHz bandwidth), and a 0.8 cm radial chord spacing are considered feasible based on the achieved performance of existing systems using similar wavelengths on fusion devices. Furthermore, synthetic diagnostic calculations taking various factors into account, such as diagnostic uncertainty and quality of magnetic flux surfaces, find that the edge current profile can be determined with up to 0.12 MA/m 2 uncertainty, or about 10% of the peak current density in the pedestal of an investigated high-confinement plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

High-performance strategies for the recent MRSF-TDDFT in GAMESS

Multiple ERI (Electron Repulsion Integral) tensor contractions (METC) with several matrices are ubiquitous in quantum chemistry. In response theories, the contraction operation, rather than ERI computations, can be the major bottleneck, as its computational demands are proportional to the multiplicatively combined contributions of the number of excited states and the kernel pre-factors. Here, this paper presents several high-performance strategies for METC. Optimal approaches involve either the data layout reformations of interim density and Fock matrices, the introduction of intermediate ERI quartet buffer, and loop-reordering optimization for a higher cache hit rate. The combined strategies remarkably improve the performance of the MRSF (mixed reference spin flip)-TDDFT (time-dependent density functional theory) by nearly 300%. The results of this study are not limited to the MRSF-TDDFT method and can be applied to other METC scenarios.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Exploration of cross-beam energy transfer mitigation constraints for designing an ignition-scale direct-drive inertial confinement fusion driver

The compression of direct-drive inertial confinement fusion (ICF) targets is strongly impacted by cross-beam energy transfer (CBET), a laser-plasma instability that limits ablation pressure by redirecting laser energy outward and that is projected to be mitigated by laser bandwidth. Here, we explore various CBET mitigation constraints to guide the design of future ICF facilities. First, we find that the flat, Gaussian, and Lorentzian spectral shapes have similar CBET mitigation properties, and a flat shape with nine spectral lines is a good surrogate for what can be obtained with other spectral shapes. Then, we conduct a comprehensive study across energy scales and ignition designs. 3D hydrodynamic simulations are used to derive an analytical model for the expected CBET mitigation as a function of laser and plasma parameters. From this model, we study the bandwidth requirements of conventional and shock ignition designs across four different energy scales and find that they require between 0.5 and 3±0.2% relative bandwidth. Further, best mitigation is achieved when the beam radius over critical radius R b /R c is kept low during the drive while the plasma temperature is kept high. In a steady state, we find that the bandwidth required to mitigate 85% of CBET scales as (R b /R c ) 2.15 L n –0.58 I 0.7 , where L n is the density scale length, and I the laser intensity. Finally, we find that the chamber beam port layout does not influence CBET mitigation. In the case of a driver using many monochromatic beamlets, we find that ~10 beamlets per port is required, with diminishing returns above ~20.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Quantum bath augmented stochastic nonequilibrium atomistic simulations for molecular heat conduction

Classical molecular dynamics (MD) has been shown to be effective in simulating heat conduction in certain molecular junctions since it inherently takes into account some essential methodological components which are lacking in the quantum Landauer-type transport model, such as many-body full force-field interactions, anharmonicity effects and nonlinear responses for large temperature biases. However, the classical MD reaches its limit in the environments where the quantum effects are significant (e.g. with low-temperatures substrates, presence of extremely high frequency molecular modes). Here, we present an atomistic simulation methodology for molecular heat conduction that incorporates the quantum Bose–Einstein statistics into an “effective temperature” in the form of a modified Langevin equation. We show that the results from such a quasi-classical effective temperature MD method deviates drastically when the baths temperature approaches zero from classical MD simulations and the results converge to the classical ones when the bath approaches the high-temperature limit, which makes the method suitable for full temperature range. In addition, we show that our quasi-classical thermal transport method can be used to model the conducting substrate layout and molecular composition (e.g. anharmonicities, high-frequency modes). Anharmonic models are explicitly simulated via the Morse potential and compared to pure harmonic interactions to show the effects of anharmonicities under quantum colored bath setups. Finally, the chain length dependence of heat conduction is examined for one-dimensional polymer chains placed in between quantum augmented baths.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

3-center and 4-center 2-particle Gaussian AO integrals on modern accelerated processors

We report an implementation of the McMurchie–Davidson (MD) algorithm for 3-center and 4-center 2-particle integrals over Gaussian atomic orbitals (AOs) with low and high angular momenta l and varying degrees of contraction for graphical processing units (GPUs). This work builds upon our recent implementation of a matrix form of the MD algorithm that is efficient for GPU evaluation of 4-center 2-particle integrals over Gaussian AOs of high angular momenta (l ≥ 4) [A. Asadchev and E. F. Valeev, J. Phys. Chem. A 127, 10889–10895 (2023)]. The use of unconventional data layouts and three variants of the MD algorithm allow for the evaluation of integrals with double precision and sustained performance between 25% and 70% of the theoretical hardware peak. Performance assessment includes integrals over AOs with l ≤ 6 (a higher l is supported). Preliminary implementation of the Hartree–Fock exchange operator is presented and assessed for computations with up to a quadruple-zeta basis and more than 20 000 AOs. The corresponding C++ code is part of the experimental open-source LibintX library available at https://github.com/ValeevGroup/libintx.

Chemistry↗
DOE OSTI2024

Fast photodiode arrays for high frequency fluctuation measurements of reconnecting flux ropes

An array of compact, high-bandwidth (>200 MHz) and low-cost optical photodiodes has been developed and implemented on the PHASe MApping (PHASMA) experiment. Using purpose-built electronics, an array of 16 photodetectors was constructed and used to monitor broadband (1–5 MHz) fluctuations in light intensity emitted by flux ropes undergoing electron-only magnetic reconnection. These measurements reveal a swath of oscillatory behavior, including wave propagation inward toward the diffusion region at approximately the local electron Alfvén speed. Custom 3D-printed collection optics and mounting hardware allow quick reconfiguration of the array for radial or axial measurements. The electronics design is flexible enough to be used with other current-sourcing transducers, such as avalanche photodiodes; silicon photomultipliers; and infrared, x-ray, and UV photodiodes. A noise-rejecting electrical layout allows for low-noise operation close to pulsed plasma discharges. A 16-channel, 64-pixel tomographic array was constructed and initial reconstructions are presented.

Instruments & Instrumentation↗
DOE OSTI2025

Advanced Simulation of ITER Core X-ray Crystal Spectroscopy

X-Ray Simulation Analysis (XRSA) is an analytical ray-tracing mixed code developed specifically for the ITER Core X-Ray Crystal Spectroscopy (XRCS-Core) diagnostic, which employs a dual-reflection configuration incorporating multiple pre-reflectors made of Highly Oriented Pyrolytic Graphite (HOPG) and spherically curved analyzing crystals. The ITER XRCS-Core is designed for high spectral resolution measurement in specific wavelength ranges, including narrow bands around 1.354 Å for W 64+ , 2.19 Å for Xe 51+ , and 2.555 Å for Xe 44+ and Xe 47+ , enabling diagnostic capability across a broad electron temperature range in the ITER plasma. XRSA facilitates efficient simulation of the spectral performance of this complex X-ray spectroscopic system. Recent updates to the XRSA code have incorporated two critical effects: auto-focusing, which specifically applies to HOPG, and polarization. These two effects are particularly important in the dual-reflection configuration used in the ITER XRCS-Core system to provide more accurate modeling results. Here, simulations conducted with the updated code demonstrate that polarization has a substantial impact on the performance of the dual-reflection system. Additionally, the combined influence of polarization and system layout introduces performance variations across channels through the same crystal.

Computer graphics↗
DOE OSTI2025

Testing strong-field QED with the avalanche precursor

A two-beam high-power laser facility is essential for the study of one of the most captivating phenomena predicted by strong-field quantum electrodynamics (QED) and yet unobserved experimentally: the avalanche-type cascade. In such a cascade, the energy of intense laser light can be efficiently transformed into high-energy radiation and electron–positron pairs. The future 50-petawatt-scale laser facility NSF OPAL will provide unique opportunities for studying such strong-field QED effects, as it is designed to deliver two ultra-intense, tightly focused laser pulses onto the interaction point. In this work, we investigate the potential of such a facility for studying elementary particle and plasma dynamics deeply in the quantum radiation-dominated (RD) regime, and the generation of QED avalanches. With three-dimensional particle-in-cell simulations, we demonstrate that QED avalanche precursors can be reliably triggered under realistic laser parameters and layout (namely, focusing f/2, tilted optical axes, and non-ideal co-pointing) with the anticipated capabilities of NSF OPAL. We demonstrate that seed electrons can be efficiently injected into the laser focus by using targets of three types: a gas of heavy atoms, an overcritical plasma, and a thin foil. A strong positron and high-energy photon signal is generated in all cases. The cascade properties can be identified from the final particle distributions, which have a clear directional pattern. At increasing laser field intensity, such distributions provide signatures of the transition, first, to the RD interaction regime, and then to a QED avalanche. Our findings can also be used for designing related future experiments.

Lasers↗
DOE OSTI2014

Multiterawatt femtosecond laser system with kilohertz pulse repetition rate

The basic principles, layout and components are presented for a multiterawatt femtosecond laser system with a kilohertz pulse repetition rate f, based on their parametric amplification and laser amplification of picosecond radiation that pumps the stages of the parametric amplifier. The results of calculations for a step-by-step increase in the output power from the LBO crystal parametric amplifier channel up to the multiterawatt level are presented. By using the developed components in the pump channel of the laser system, the parameters of the regenerative amplifier with the output energy ∼1 mJ at the wavelength 1030 nm and with f = 1 kHz are experimentally studied. The optical scheme of the diode-pumped multipass cryogenic Yb:Y{sub 2}O{sub 3} laser ceramic amplifier is developed and its characteristics are determined that provide the output energy within the range 0.25 – 0.35 J. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Acousto-optic gyrotropic-crystal-based modulator with a rotating polarisation vector

We study the influence of ellipticity of gyrotropic-crystal eigenwaves on the output characteristics of an acousto-optic (AO) modulator based on the interferometer scheme. The schemes of AO modulators are considered, which provide the polarisation vector rotation frequency fn /2, where f is the frequency of the acoustic wave, and n is the integer. Preference is given to the scheme combining cascade and polarisation-independent diffraction. An experimental layout of the AO modulator operating at f = 44.5 MHz is described, the modulation frequency of the output laser light intensity being 89 MHz. The frequency of the electrical signal from the photodetector is equal to 179.5 MHz. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗