Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC BEARINGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

High-stability Shuttle pointing system

It was recognized that precision pointing provided by the Orbiter's attitude control system would not be good enough for Shuttle payload scientific experiments or certain Defense department payloads. The Annular Suspension Pointing System (ASPS) is being developed to satisfy these more exacting pointing requirements. The ASPS is a modular pointing system which consists of two principal parts, including an ASPS Gimbal System (AGS) which provides three conventional ball-bearing gimbals and an ASPS Vernier System (AVS) which magnetically isolates the payload. AGS performance requirements are discussed and an AGS system description is given. The overall AGS system consists of the mechanical hardware, sensors, electronics, and software. Attention is also given to system simulation and performance prediction, and support facilities.

Van Riper, R.↗

Fiber-Optic Lateral-Displacement Sensor

Proposed fiber-optic sensor monitors axial position of shaft or bearing in turbomachine. Device senses position of non-magnetic as well as magnetic material and calibrates before assembly in machine. More compact. Concept extends to measure rotational speed of shaft.

Roschak, Edmund J.↗

Arcsecond grating drive mechanism for operation at 4 K

A grating drive mechanism that achieves arcsecond positional control at both room temperature and 4 K is described. The mechanism accommodates eight equally spaced facets on a 360-deg drum, with each facet having arcsecond control over an angular range of +/-3 deg. The cryogenic portion consists of dry lubricated angular contact bearings, a dc brushless torque motor, and a compact magnetic position sensor capable of less than 1 arcsec rms resolution. Test results demonstrate angular repeatability of less than 2 arcsec rms at 4 K and static power dissipation to the helium bath of less than 100 microW.

Downey, C. H.↗

Recovering rare earth metals from magnet scrap

A method is provided for treating a rare earth metal-bearing scrap material by melting an extractant selected from the group consisting of bismuth (Bi) and lead (Pb) and contacting the melted extractant and the scrap material at a temperature and time to recover at least one of the light rare earth metal content and the heavy rare earth metal content as a metallic extractant alloy, which can be subjected to vacuum distillation or sublimation to recover the rare earth metal(s). The method can be practiced to recover the light rare earth metal content and the heavy rare earth metal content concurrently in a one-step process or separately and sequentially in a two-step process.

Ott, Ryan T.↗

Nickel-Titanium Alloys: Corrosion "Proof" Alloys for Space Bearing, Components and Mechanism Applications

An intermetallic nickel-titanium alloy, 60NiTi (60wt%Ni, 40wt%Ti), is shown to be a promising candidate tribological material for space mechanisms. 60NiTi offers a broad combination of physical properties that make it unique among bearing materials. 60NiTi is hard, electrically conductive, highly corrosion resistant, readily machined prior to final heat treatment, and is non-magnetic. Despite its high titanium content, 60NiTi is non-galling even under dry sliding. No other bearing alloy, metallic or ceramic, encompasses all of these attributes. Since 60NiTi contains such a high proportion of titanium and possesses many metallic properties, it was expected to exhibit poor tribological performance typical of titanium alloys, namely galling type behavior and rapid lubricant degradation. In this poster-paper, the oil-lubricated behavior of 60NiTi is studied.

DellaCorte, Christopher↗

Nickel-Titanium Alloys: Corrosion "Proof" Alloys for Space Bearing, Components and Mechanism Applications

An intermetallic nickel-titanium alloy, 60NiTi (60 wt% Ni, 40 wt% Ti), is shown to be a promising candidate tribological material for space mechanisms. 60NiTi offers a broad combination of physical properties that make it unique among bearing materials. 60NiTi is hard, electrically conductive, highly corrosion resistant, readily machined prior to final heat treatment, and is non-magnetic. Despite its high Ti content, 60NiTi is non-galling even under dry sliding. No other bearing alloy, metallic or ceramic, encompasses all of these attributes. Since 60NiTi contains such a high proportion of Ti and possesses many metallic properties, it was expected to exhibit poor tribological performance typical of Ti alloys, namely galling type behavior and rapid lubricant degradation. In this poster-paper, the oil-lubricated behavior of 60NiTi is presented.

DellaCorte, Christopher↗

Combining paleointensity methods - A dual-valued determination on lunar sample 10017,135

A single-heating procedure for the determination of two partially independent values of paleofield intensity for one sample is presented. The procedure combines data for Shaw-type and 'ARM-method' determinations furnishing the ratio thermoremanent magnetization (TRM) to ARM acquisition efficiency corrected for physicochemical alteration to the magnetic carriers. Applicability of the Shaw-method to Fe-bearing samples is demonstrated by simulated paleointensity determinations on synthetic samples containing multidomain grains. The combined Shaw-ARM procedure was applied to a linear basalt sample, but the Thellier-Thellier method could not provide a meaningful determination of the neighboring chip. These conflicting findings may be explained by multiple step-wise heatings causing more damage to carriers than a single heating procedure, and by the natural remanent magnetization in this lunar basalt not being a simple TRM.

Hoffman, K. A.↗

Current Status of Hybrid Bearing Damage Detection

Advances in material development and processing have led to the introduction of ceramic hybrid bearings for many applications. The introduction of silicon nitride hybrid bearings into the high pressure oxidizer turbopump, on the space shuttle main engine, led NASA to solve a highly persistent and troublesome bearing problem. Hybrid bearings consist of ceramic balls and steel races. The majority of hybrid bearings utilize Si3N4 balls. The aerospace industry is currently studying the use of hybrid bearings and naturally the failure modes of these bearings become an issue in light of the limited data available. In today s turbine engines and helicopter transmissions, the health of the bearings is detected by the properties of the debris found in the lubrication line when damage begins to occur. Current oil debris sensor technology relies on the magnetic properties of the debris to detect damage. Since the ceramic rolling elements of hybrid bearings have no metallic properties, a new sensing system must be developed to indicate the system health if ceramic components are to be safely implemented in aerospace applications. The ceramic oil debris sensor must be capable of detecting ceramic and metallic component damage with sufficient reliability and forewarning to prevent a catastrophic failure. The objective of this research is to provide a background summary on what is currently known about hybrid bearing failure modes and to report preliminary results on the detection of silicon nitride debris, in oil, using a commercial particle counter.

Dempsey, Paula J.↗

Interpretation of CHAMP Magnetic Anomaly Data over the Pannonian Basin Region Using Lower Altitude Horizontal Gradient Data

The ESA SWARM mission will have three earth orbiting magnetometer bearing satellites one in a high orbit and two side-by-side in lower orbits. These latter satellites will record a horizontal magnetic gradient. In order to determine how we can use these gradient measurements for interpretation of large geologic units we used ten years of CHAMP data to compute a horizontal gradient map over a section of southeastern Europe with our goal to interpret these data over the Pannonian Basin of Hungary.

CHAMP↗

The initiation of coronal mass ejections by newly emerging magnetic flux

We present observational evidence that eruptions of quiescent filaments and associated coronal mass ejections (CMEs) occur as a consequence of the destabilization of large-scale coronal arcades due to interactions between these structures and new and growing active regions. Both statistical and case studies have been carried out. In a case study of a 'bulge' observed by the High-Altitude Observatory Solar Maximum Mission coronagraph, the high-resolution magnetograms from the Big Bear Solar Observatory show newly emerging and rapidly changing flux in the magnetic fields that apparently underlie the bugle. For other case studies and in the statistical work the eruption of major quiescent filaments was taken as a proxy for CME eruption. We have found that two thirds of the quiescent-filament-associated CMEs occurred after substantial amounts of new magnetic flux emerged in the vicinity of the filament. In addition, in a study of all major quiescent filaments and active regions appearing in a 2-month period we found that 17 of the 22 filaments that were associated with new active regions erupted and 26 of the 31 filaments that were not associated with new flux did not erupt. In all cases in which the new flux was oriented favorably for reconnection with the preexisting large-scale coronal arcades; the filament was observed to erupt. The appearance of the new flux in the form of new active regions begins a few days before the eruption and typically is still occurring at the time of the eruption. A CME initiation scenario taking account of these observational results is proposed.

Feynman, J.↗

Hybrid lubrication system and bearing Patent

Development of hybrid bearing lubrication system with combination of standard type lubrication and magnetic flux field for earth atmosphere and space environment operation

Sauer, L. S.↗

Spectrograph, filtergraph and magnetograph observations of the two-ribbon flare of 29 July, 1973

High-resolution observations of a class-3N two-ribbon flare were conducted at 1324 UT on July 29, 1973, at Big Bear Solar Observatory. The flare occurred in a diffuse bipolar magnetic region completely devoid of sunspots and was associated with a type IV radio burst and a soft X-ray event. Extensive H alpha filtergraph, spectrograph and magnetograph records taken during the main phase of the flare suggest the presence of downfalling and streaming materials for several hours on both ribbons during the growth phase of H alpha emission. Hyder's infall-impact model (1967) is found to be inconsistent with the authors' filtergraph and spectrograph observations.

Michalitsanos, A. G.↗

Torque Simulator for Rotating Systems

New torque brake simulates varying levels of friction in bearings of rotating body. Rolling-tail torque brake uses magnetic force to produce friction between rotating part and stationary part. Simulator electronics produce positive or negative feedback signal, depending on direction of rotation. New system allows for first time in-depth study of effects of tail-fin spin rates on pitch-, yaw-, and roll-control characteristics.

Davis, W. T.↗

On the disappearance of a small sunspot group

The small sunspot group associated with Hale active region 17694 was observed jointly by the Mount Wilson and the Big Bear Solar Observatories, through the time of sunspot disappearance. The magnetic flux from the region was seen to decrease by about 10% per day during the observing interval. This was accompanied by fragmentation of the dominant spot as a supergranule network formed. No evidence for spreading or diffusion of the active region field was found.

Wallenhorst, S. G.↗

Passive eddy-current damping as a means of vibration control in cryogenic turbomachinery

Lateral shaft vibrations produced by a rotating unbalance weight were damped by means of eddy currents generated in copper conductors that were precessing cyclicly in the gap formed by the pole faces of C-shaped, permanent magnets. The damper assembly, which was located at the lower bearing support of a vertically oriented rotor was completely immersed in liquid nitrogen during the test run. The test rotor was operated over a speed range from 800 to 10,000 rpm. Three magnet/conductor designs were evaluated. Experimental damping coefficients varied from 180 to 530 N sec/m. Reasonable agreement was noted for theoretical values of damping for these same assemblies. Values of damping coefficients varied from 150 to 780 N sec/m. The results demonstrate that passive eddy-current damping is a viable candidate for vibration control in cryogenic turbomachinery.

Cunningham, R. E.↗

Range estimation techniques in single-station thunderstorm warning sensors based upon gated, wideband, magnetic direction finder technology

Gated, wideband, magnetic direction finders (DFs) were originally designed to measure the bearing of cloud-to-ground lightning relative to the sensor. A recent addition to this device uses proprietary waveform discrimination logic to select return stroke signatures and certain range dependent features in the waveform to provide an estimate of range of flashes within 50 kms. The enhanced ranging techniques are discussed which were designed and developed for use in single station thunderstorm warning sensor. Included are the results of on-going evaluations being conducted under a variety of meteorological and geographic conditions.

Pifer, Alburt E.↗