Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC FUSION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Enhanced helium exhaust during edge-localized mode suppression by resonant magnetic perturbations at DIII-D

Effective helium confinement time, τ p * ,He , and its ratio with energy confinement time, τ p * ,He / τ E , are key metrics quantifying the suitability of fusion plasmas for a continuous burn. Comparisons in the DIII-D tokamak of discharges with suppression of edge localized modes (ELMs) by resonant magnetic field perturbations (RMPs) to the corresponding unperturbed ELMy discharges found that both of these metrics were strongly reduced, by a factor of approximately 2, after application of the RMPs. This reduction in τ p * ,He during RMP ELM suppression was observed in the plasma core, edge, and pumping plenum, where higher neutral helium concentration during RMPs was also measured. In conclusion, these findings provide evidence that future devices employing RMP ELM suppression may meet or even exceed the helium exhaust provided by the ELMs themselves, reducing helium ash, and thus maintaining high fusion gain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Resistive wall tearing mode disruptions in DIII-D and ITER tokamaks

Disruptions are a serious problem in tokamaks, in which thermal and magnetic energy confinement is lost. This paper uses data from the DIII-D experiment, theory, and simulations to demonstrate that resistive wall tearing modes (RWTMs) produce the thermal quench (TQ) in a typical locked mode shot. Analysis of the linear RWTM dispersion relation shows the parameter dependence of the growth rate, particularly on the resistive wall time. Linear simulations of the locked mode equilibrium show that it is unstable with a resistive wall and stable with an ideally conducting wall. Nonlinear simulations demonstrate that the RWTM grows to sufficient amplitude to cause a complete thermal quench. The RWTM growth time is proportional to the thermal quench time. Here, the nonlinearly saturated RWTM magnetic perturbation amplitude agrees with experimental measurements. The onset condition is that the q = 2 rational surface is sufficiently close to the resistive wall. Collectively, this identifies the RWTM as the cause of the TQ. In ITER, RWTMs will produce long TQ times compared to present-day experiments. ITER disruptions may be significantly more benign than previously predicted.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An imaging proton spectrometer for short-pulse laser plasma experiments

The ultraintense short pulse laser pulses incident on solid targets can generate energetic protons. In addition to their potentially important applications such as in cancer treatments and proton fast ignition, these protons are essential to understand the complex physics of intense laser plasma interaction. To better characterize these laser-produced protons, we designed and constructed a novel spectrometer that will not only measure proton energy distribution with high resolution but also provide its angular characteristics. The information obtained from this spectrometer compliments those from commonly used diagnostics including radiochromic film packs, CR39 nuclear track detectors, and nonimaging magnetic spectrometers. The basic characterizations and sample data from this instrument are presented.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Investigation of a Rail Electromagnetic Plasma Jet Source

We report the results of investigation of elements of a rail-type electromagnetic accelerator (railgun), which are aimed at analysis of the mechanism of formation of a dense clean plasma jet with a high kinetic energy. The accelerator is tested with a pulsed gas puffing and with electrodes of different shapes and lengths, as well as an additional magnetic field produced by external current-carrying conductors. We have developed a method for monitoring plasma jet parameters on a plasma gun test bench using a pressure sensor and an infrared camera. We have analyzed the dependence of deuterium plasma jet pressure on the distance to the accelerator and estimated kinetic energy of the jet.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Functional Plasma-Sprayed Ceramic Coatings for Use in Fusion Energy Systems

There is growing demand for new, cleaner ways to supply the rapidly growing global energy demand, as concerns grow over climate change and declining supplies of fossil fuels. Nuclear fusion, the phenomenon in which atomic nuclei collide together and release massive quantities of energy, is one of the most promising options for generating large amounts of carbon-free energy in the future.1 To initiate a common nuclear fusion reaction of hydrogen isotopes – deuterium and tritium, a hot plasma state is needed at incredibly high temperatures approaching 100 million degrees centigrade. One practical way to achieve these conditions is to use magnetic confinement of the plasma in a toroidal nuclear reactor known as a tokamak (Figure 1). A commercial fusion power station will then harvest the energy by converting the heat provided by the fusion chain reaction into steam to power gas turbines, and generate electricity on to the grid, while the excess neutrons also produced in the process is captured by a blanket made of dense material surrounding the tokomak.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Local thermodynamics of a magnetized, anisotropic plasma

An expression for the internal energy of a fluid element in a weakly coupled, magnetized, anisotropic plasma is derived from first principles. The result is a function of entropy, particle density and magnetic field, and as such plays the role of a thermodynamic potential: it determines in principle all thermodynamic properties of the fluid element. In particular it provides equations of state for the magnetized plasma. The derivation uses familiar fluid equations, a few elements of kinetic theory, the MHD version of Faraday's law, and certain familiar stability and regularity conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Collaborative Research: Explosive reconnection in relativistic magnetically-dominated plasmas (Final Report)

Magnetic fields can be the dominant component of astrophysical plasmas, so that the magnetic energy density might exceed even the rest-mass energy density of matter. In this extreme (and largely unexplored) regime the magnetic field controls the overall plasma evolution, dissipation, and acceleration of non-thermal particles. This plasma regime, applicable to a variety of astrophysical sources - magnetars, pulsars and pulsar wind nebulae (PWNe), jets of Active Galactic Nuclei (AGNs) and Gamma-Ray Bursters (GRBs) - is dramatically different from laboratory plasmas, the magnetospheres of planets, and the interplanetary plasma. Relativistic astrophysical sources then provide an unique opportunity to study the fundamental plasma physics of magnetically-dominated plasmas; a novel and fast-evolving field of theoretical research which, by investigating energy conversion and particle energization processes in plasmas, is of vital importance to the Fusion Energy Sciences DoE program. Data coming from astrophysical high-energy missions, especially the Crab Nebula flares recently observed by the Fermi and AGILE satellites, suggest that the acceleration of non-thermal particles to the highest energies occurs in magnetic reconnection events - a major change of paradigm in high-energy astrophysics. Most importantly, observations demand that particle acceleration should proceed extremely fast (with accelerating electric field of the order of the magnetic field) and on macroscopic scales (much larger, e.g., than the microscopic plasma skin depth). We are conducting studies of the microphysics of magnetically-dominated plasmas focussing in particular on the highly dynamic regime of explosive reconnection and associated particle acceleration in relativistic plasmas. We are studying the stability and explosive plasma dynamics, particle acceleration and radiation production in a number of idealized plasma configurations that approximate relevant astrophysical sources (like the magnetic ABC structures and interacting flux tubes, as well as generalizations of analytical models of X-point collapse to relativistic plasmas). The well-studied case of the Crab Nebula is taken as a prototypical example for the application of the model. We are combining analytical studies of explosive magnetic dynamics and dissipation in relativistic plasmas with particle-in-cell (PIC) simulations and fluid simulations. The theoretical model, fluid and particle-in-cell simulations are cross-checked for agreement and convergence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A FLUX ROPE NETWORK AND PARTICLE ACCELERATION IN THREE-DIMENSIONAL RELATIVISTIC MAGNETIC RECONNECTION

We investigate magnetic reconnection and particle acceleration in relativistic pair plasmas with three-dimensional particle-in-cell simulations of a kinetic-scale current sheet in a periodic geometry. We include a guide field that introduces an inclination between the reconnecting field lines and explore outside-of-the-current sheet magnetizations that are significantly below those considered by other authors carrying out similar calculations. Thus, our simulations probe the transitional regime in which the magnetic and plasma pressures are of the same order of magnitude. The tearing instability is the dominant mode in the current sheet for all guide field strengths, while the linear kink mode is less important even without the guide field, except in the lower magnetization case. Oblique modes seem to be suppressed entirely. In its nonlinear evolution, the reconnection layer develops a network of interconnected and interacting magnetic flux ropes. As smaller flux ropes merge into larger ones, the reconnection layer evolves toward a three-dimensional, disordered state in which the resulting flux rope segments contain magnetic substructure on plasma skin depth scales. Embedded in the flux ropes, we detect spatially and temporally intermittent sites of dissipation reflected in peaks in the parallel electric field. Magnetic dissipation and particle acceleration persist until the end of the simulations, with simulations with higher magnetization and lower guide field strength exhibiting greater and faster energy conversion and particle energization. At the end of our largest simulation, the particle energy spectrum attains a tail extending to high Lorentz factors that is best modeled with a combination of two additional thermal components. We confirm that the primary energization mechanism is acceleration by the electric field in the X-line region. The highest-energy positrons (electrons) are moderately beamed with median angles {approx}30 Degree-Sign -40 Degree-Sign relative to (the opposite of) the direction of the initial current density, but we speculate that reconnection in more highly magnetized plasmas would give rise to stronger beaming. Finally, we discuss the implications of our results for macroscopic reconnection sites, and which of our results may be expected to hold in systems with higher magnetizations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Metastability of stratified magnetohydrostatic equilibria and their relaxation

Motivated by explosive releases of energy in fusion, space and astrophysical plasmas, we consider the nonlinear stability of stratified magnetohydrodynamic equilibria against two-dimensional interchanges of straight magnetic-flux tubes. We demonstrate that, even within this restricted class of dynamics, the linear stability of an equilibrium does not guarantee its nonlinear stability: equilibria can be metastable. We show that the minimum-energy state accessible to a metastable equilibrium under non-diffusive two-dimensional dynamics can be found by solving a combinatorial optimisation problem. These minimum-energy states are, to good approximation, the final states reached by our simulations of destabilised metastable equilibria for which turbulent mixing is suppressed by viscosity. To predict the result of fully turbulent relaxation, we construct a statistical mechanical theory based on the maximisation of Boltzmann's mixing entropy. This theory is analogous to the Lynden-Bell statistical mechanics of collisionless stellar systems and plasma, and to the Robert–Sommeria–Miller theory of two-dimensional vortex turbulence. Our theory reproduces well the results of our numerical simulations for sufficiently large perturbations to the metastable equilibrium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Forcing continuous reconnection in hybrid simulations

We have performed hybrid simulations of driven continuous reconnection with open boundary conditions. Reconnection is started by a collision of two subsonic plasma fronts with opposite magnetic fields, without any specified magnetic field configuration as initial condition. Due to continued forced plasma inflow, a current sheet co-located with a dense and hot plasma sheet develops. The translational symmetry of the current sheet is broken by applying a spatial gradient in the inflow speed. We compare runs with and without localized resistivity: reconnection is initiated in both cases, but localized resistivity stabilizes it and enhances its efficiency. The outflow speed reaches about half of Alfvén speed. We quantify the conversion of magnetic energy to kinetic energy of protons and to Joule heating and show that with localized resistivity, kinetic energy of protons is increased on average five-fold in the reconnection in our simulation case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dielectric properties of neutron and proton irradiated polymeric nanocomposite insulation for superconducting magnets of fusion power plants

Studies on radiation-resistant electrical insulation for superconducting magnets of nuclear fusion power plants are discussed. Metal oxide nanoparticle-incorporated organic polymer composite (MONAP) insulation films were manufactured and studied for their dielectric breakdown strength after exposure to neutrons and proton radiation at varying levels. Samples with up to 5 wt% of nanoparticles (NPs) of SiO 2 , MgO, and ZrO 2 were studied. The samples were exposed to radiation of up to 2 × 10 16 neutrons/cm 2 and 200 Mrad of protons. The addition of the nanoparticles improved the radiation resistance of the MONAP, and the performance depended on the type of NPs and the radiation exposure. Dielectric breakdown measurements at 77 K showed little degradation. Enhancement of dielectric strength was observed in some instances.

36 MATERIALS SCIENCE↗

Numerical simulation of current-free double layers created in a helicon plasma device

Two-dimensional simulations reveal that when radially confined source plasma with magnetized electrons and unmagnetized ions expands into diverging magnetic field B, a current-free double layer (CFDL) embedded in a conical density structure forms, as experimentally measured in the Australian helicon plasma device (HPD). The magnetized electrons follow the diverging B while the unmagnetized ions tend to flow directly downstream of the source, resulting in a radial electric field (E{sub Up-Tack }) structure, which couples the ion and electron flows. Ions are transversely (radially) accelerated by E{sub Up-Tack} on the high potential side of the double layer in the CFDL. The accelerated ions are trapped near the conical surface, where E{sub Up-Tack} reverses direction. The potential structure of the CFDL is U-shaped and the plasma density is enhanced on the conical surface. The plasma density is severely depleted downstream of the parallel potential drop ({phi}{sub Double-Vertical-Line Double-Vertical-Line o}) in the CFDL; the density depletion and the potential drop are related by quasi-neutrality condition, including the divergence in the magnetic field and in the plasma flow in the conical structure. The potential and density structures, the CFDL spatial size, its electric field strengths and the electron and ion velocities and energy distributions in the CFDL are found to be in good agreements with those measured in the Australian experiment. The applicability of our results to measured axial potential profiles in magnetic nozzle experiments in HPDs is discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multi-Zone Modeling of the Pulsar Win Nebula HESS J1825-137

The pulsar wind nebula associated with PSR J1826-1334, HESS J1825-137, is a bright very high energy source with an angular extent of {approx} 1{sup o} and spatially-resolved spectroscopic TeV measurements. The gamma-ray spectral index is observed to soften with increasing distance from the pulsar, likely the result of cooling losses as electrons traverse the nebula. We describe analysis of X-ray data of the extended nebula, as well as 3-D time-dependent spectral energy distribution modeling, with emphasis on the spatial variations within HESS J1825-137. The multi-wavelength data places significant constraints on electron injection, transport, and cooling within the nebula. The large size and high nebular energy budget imply a relatively rapid initial pulsar spin period of 13 {+-} 7 ms and an age of 40 {+-} 9 kyr. The relative fluxes of each VHE zone can be explained by advective particle transport with a radially decreasing velocity profile with v(r) {proportional_to} r{sup -0.5}. The evolution of the cooling break requires an evolving magnetic field which also decreases radially from the pulsar, B(r, t) {proportional_to} r{sup -0.7} E(t){sup 1/2}. Detection of 10 TeV flux {approx} 80 pc from the pulsar requires rapid diffusion of high energy particles with {tau}{sub esc} {approx} 90 (R/10 pc){sup 2}(E{sub e}/100TeV){sup -1} year, contrary to the common assumption of toroidal magnetic fields with strong magnetic confinement. The model predicts a rather uniform Fermi LAT surface brightness out to {approx} 1{sup o} from the pulsar, in good agreement with the recently discovered LAT source centered 0.5{sup o} southwest of PSR J1826-1334 with extension 0.6 {+-} 0.1{sup o}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Compact steady-state tokamak performance dependence on magnet and core physics limits

Compact tokamak fusion reactors utilizing advanced high-temperature superconducting magnets for the toroidal field coils have received considerable recent attention due to the promise of more compact devices and more economical fusion energy development. Facilities with combined Fusion Nuclear Science (FNS) and Pilot Plant missions to provide both the nuclear environment needed to develop fusion materials and components while also potentially achieving sufficient fusion performance to generate modest net electrical power are considered. The performance of the tokamak fusion system is assessed using a range of core physics and toroidal field magnet performance constraints to better understand which parameters most strongly influence the achievable fusion performance.

Low aspect ratio↗

Reduced electron temperature in a magnetized inductively-coupled plasma with internal coil

The effect of magnetic filtering on the electron energy distribution function is studied in an inductive discharge with internal coil coupling. The coil is placed inside the plasma and driven by a low-frequency power supply (5.8 MHz) which leads to a very high power transfer efficiency. A permanent dipole magnet may be placed inside the internal coil to produce a static magnetic field around 100 Gauss. The coil and the matching system are designed to minimize the capacitive coupling to the plasma. Capacitive coupling is quantified by measuring the radiofrequency (rf) plasma potential with a capacitive probe. Without the permanent magnet, the rf plasma potential is significantly smaller than the electron temperature. When the magnet is present, the rf plasma potential increases. The electron energy distribution function is measured as a function of space with and without the permanent magnet. When the magnet is present, electrons are cooled down to low temperature in the downstream region. This region of low electron temperature may be useful for plasma processing applications, as well as for efficient negative ion production.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Directional elliptically polarized terahertz emission from air plasma produced by circularly polarized intense femtosecond laser pulses

We have observed directional elliptically polarized terahertz (THz) waves emitted from air plasma produced by circularly polarized femtosecond laser pulses. The spatial distribution of the THz waves shows that the radiation is strongly directed forward with a peak around the laser propagation direction. Measured THz power shows a square dependence on laser energy. We consider the parametric decay of laser light to R-waves in plasma in the presence of a spontaneous magnetic field as a possible explanation for the polarization, power dependence, and direction of the THz beam.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation of episodic magnetically driven plasma jets in a radial foil Z-pinch

We present experimental results of the formation of magnetically driven plasma jets, showing for the first time a way of producing episodic jet/ouflows in the laboratory. The jets are produced using a 6.5 {mu}m thick aluminum disk (a radial foil), which is subjected to the 1 MA, 250 ns current pulse from the MAGPIE generator [I. H. Mitchell et al., Rev. Sci. Instrum. 67, 1533 (1996)]. The early time motion of the foil is characterized by the bulk motion of the mass due to the magnetic pressure, together with the formation of a surface plasma following the direction of the JxB force. A low density plasma fills the region above the foil preceding the formation of subsequent magnetically driven jets on the axis of expanding magnetic bubbles. The outflows emerge in timescales of {approx}30-40 ns and their episodic nature is the result of current reconnection in the foil, aided by the formation of current-driven instabilities in the jet and the distribution of mass available from the foil. The additional inductance due to the new current path inside the cavities was measured using an inductive probe, allowing to estimate the energy balance associated with the episodes. The measured temperature of the compressed jet resulted in T{sub e{approx}}300 eV and a magnetic Reynolds number of Re{sub M{approx}}200-1000, allowing the experiments to be in the regime relevant for scaled representations of astrophysical outflows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

PANDA-FES: Portable and Adaptable Neutron Diagnostics for Advancing Fusion Energy Science

Nuclear fusion is a potential source of carbon-free electricity with many concepts in development. The Portable and Adaptable Neutron Diagnostics for Advancing Fusion Energy Science (PANDA-FES) suite has been deployed since 2021 to measure neutron yield, energy, and spatiotemporal source location at two different Z-pinch fusion devices. This diagnostic can be used at a variety of facilities pursuing fusion in the magnetic, inertial, and magneto-inertial regimes. These different regimes have a wide range of time scales from less than 100 ns to a few μ s, neutron yields from 10 6 to 10 11 , and noise environments. Neutron yield is measured through activation of 79 Br and 89 Y with calibrated detectors. Temporal, spatial, and energy dependence of neutrons is measured with scintillators coupled to photomultiplier tubes (PMTs). Experimental setups and data analysis methods have been developed for these conditions. Finally, neutron yield, neutron energy anisotropy, and spatiotemporal evolution of the source have been measured.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗