Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC INSULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2017

Auto-magnetizing liners for magnetized inertial fusion

Here, the MagLIF (Magnetized Liner Inertial Fusion) concept has demonstrated fusion-relevant plasma conditions on the Z accelerator using external field coils to magnetize the fuel before compression. We present a novel concept (AutoMag), which uses a composite liner with helical conduction paths separated by insulating material to provide fuel magnetization from the early part of the drive current, which by design rises slowly enough to avoid electrical breakdown of the insulators. Once the magnetization field is established, the drive current rises more quickly, which causes the insulators to break down allowing the drive current to follow an axial path and implode the liner in the conventional z-pinch manner. There are two important advantages to AutoMag over external field coils for the operation of MagLIF. Low inductance magnetically insulated power feeds can be used to increase the drive current, and AutoMag does not interfere with diagnostic access. Also, AutoMag enables a pathway to energy applications for MagLIF, since expensive field coils will not be damaged each shot. Finally, it should be possible to generate Field Reversed Configurations (FRC) by using both external field coils and AutoMag in opposite polarities. This would provide a means to studying FRC liner implosions on the 100 ns time scale.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

MOLLER Spectrometer Magnet Design With Measured Mechanical Properties of Irradiated S2-Glass Reinforced Cyanate Ester Resin at Elevated Temperature

Here, the aim of this study was to retire the risk of maintaining the integrity of S2-glass reinforced CTD-403 (a cyanate ester resin) that is exposed to radiation and elevated temperature over the life of the measurement of a lepton–lepton electroweak reaction (MOLLER) experiment in experimental Hall A at Jefferson Lab, Newport News, VA. In this article, the shear strength and flexural modulus of irradiated S2-glass reinforced CTD-403 specimens were measured at 65 °C (the magnets are to operate at less than 65 °C) under two scenarios: vacuum and gaseous nitrogen. The testing method is the short-beam shear (SBS) test according to ASTM D2344. The specimens were exposed to neutrons and gamma rays up to 124 MGy. The results show that specimens have excellent resistance against radiation, only 23% degradation of apparent shear strength with 124 MGy at 65 °C under vacuum. At the highest dose areas of the coils, tungsten plates are used to reduce the radiation dose to the resin system. The conclusion is that S2-glass reinforced CTD-403 is well-suited for electrical insulation of MOLLER magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Zero Magnetic Field Plateau Phase Transition in Higher Chern Number Quantum Anomalous Hall Insulators

The plateau-to-plateau transition in quantum Hall effect under high magnetic fields is a celebrated quantum phase transition between two topological states. It can be achieved by either sweeping the magnetic field or tuning the carrier density. The recent realization of the quantum anomalous Hall (QAH) insulators with tunable Chern numbers introduces the channel degree of freedom to the dissipation-free chiral edge transport and makes the study of the quantum phase transition between two topological states under zero magnetic field possible. Here, we synthesized the magnetic topological insulator (TI)/TI pentalayer heterostructures with different Cr doping concentrations in the middle magnetic TI layers using molecular beam epitaxy. By performing transport measurements, we found a potential plateau phase transition between C=1 and C=2 QAH states under zero magnetic field. In tuning the transition, the Hall resistance monotonically decreases from h/e2 to h/2e 2 , concurrently, the longitudinal resistance exhibits a maximum at the critical point. Our results show that the ratio between the Hall resistance and the longitudinal resistance is greater than 1 at the critical point, which indicates that the original chiral edge channel from the C=1 QAH state coexists with the dissipative bulk conduction channels. Subsequently, these bulk conduction channels appear to self-organize and form the second chiral edge channel in completing the plateau phase transition. Our study will motivate further investigations of this novel Chern number change-induced quantum phase transition and advance the development of the QAH chiral edge current-based electronic and spintronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Defect-driven ferrimagnetism and hidden magnetization in MnBi 2 Te 4

MnBi 2 Te 4 (MBT) materials are promising antiferromagnetic topological insulators in which field-driven ferromagnetism is predicted to cause a transition between axion insulator and Weyl semimetallic states. However, the presence of antiferromagnetic coupling between Mn/Bi antisite defects and the main Mn layer can reduce the low-field magnetization, and it has been shown that such defects are more prevalent in the structurally identical magnetic insulator MnSb 2 Te 4 (MST). We use high-field magnetization measurements to show that the magnetization of MBT and MST occur in stages and full saturation requires fields of ~60 T. As a consequence, the low-field magnetization plateau state in MBT, where many determinations of the quantum anomalous Hall state are studied, actually consists of ferrimagnetic septuple blocks containing both uniform and staggered magnetization components.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Observation of Reentrant Correlated Insulators and Interaction-Driven Fermi-Surface Reconstructions at One Magnetic Flux Quantum per Moiré Unit Cell in Magic-Angle Twisted Bilayer Graphene

The discovery of flat bands with nontrivial band topology in magic-angle twisted bilayer graphene (MATBG) has provided a unique platform to study strongly correlated phenomena including superconductivity, correlated insulators, Chern insulators, and magnetism. A fundamental feature of the MATBG, so far unexplored, is its high magnetic field Hofstadter spectrum. Here, we report on a detailed magnetotransport study of a MATBG device in external magnetic fields of up to B = 3 1 T , corresponding to one magnetic flux quantum per moiré unit cell Φ 0 . At Φ 0 , we observe reentrant correlated insulators at a flat band filling factors of ν = + 2 and of ν = + 3 , and interaction-driven Fermi-surface reconstructions at other fillings, which are identified by new sets of Landau levels originating from these. These experimental observations are supplemented by theoretical work that predicts a new set of eight well-isolated flat bands at Φ 0 , of comparable band width, but with different topology than in zero field. Overall, our magnetotransport data reveal a qualitatively new Hofstadter spectrum in MATBG, which arises due to the strong electronic correlations in the reentrant flat bands.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Unitary structure having magnetic and non-magnetic phases

A magnetic component having a unitary structure, a transverse flux electric machine having the magnetic component, and a method of making the magnetic component are disclosed. The unitary structure of the magnetic component includes a magnetic region and a non-magnetic region. The magnetic region includes a magnetic phase and an electrically insulating phase. The non-magnetic region includes a non-magnetic phase. The magnetic phase includes a metallic material and the non-magnetic phase includes a nitrogenated metallic material formed by a controlled nitrogenation of the metallic material.

Johnson, Francis↗
DOE OSTI2023

Colloquium : Quantum anomalous Hall effect

The quantum Hall (QH) effect, quantized Hall resistance combined with zero longitudinal resistance, is the characteristic experimental fingerprint of Chern insulators—topologically nontrivial states of two-dimensional matter with broken time-reversal symmetry. In Chern insulators, nontrivial bulk band topology is expressed by chiral states that carry current along sample edges without dissipation. Here, the quantum anomalous Hall (QAH) effect refers to QH effects that occur in the absence of external magnetic fields due to spontaneously broken time-reversal symmetry. The QAH effect has now been realized in four different classes of two-dimensional materials: (i) thin films of magnetically (Cr- and/or V-) doped topological insulators in the (Bi,Sb) 2 T 3 family, (ii) thin films of the intrinsic magnetic topological insulator MnBi 2 Te 4 , (iii) moiré materials formed from graphene, and (iv) moiré materials formed from transition-metal dichalcogenides. In this Colloquium, the physical mechanisms responsible for each class of QAH insulator are reviewed, with both differences and commonalities highlighted, and potential applications of the QAH effect are commented upon.

36 MATERIALS SCIENCE↗
DOE OSTI2026

The Evolution of Magnetism in a Thin Film Pyrochlore Ferromagnetic Insulator

The pyrochlore vanadates are compelling candidates for next-generation dissipationless devices. Lu 2 V 2 O 7 and Y 2 V 2 O 7 are ferromagnetic insulators (T c ~ 70 K) that are believed to exhibit the magnon Hall effect and are expected to host topological magnons. Their completely dissipationless magnon edge states could be harnessed to realize low-power information transport in spintronic or magnonic devices. As a crucial step in the realization of devices, we synthesize the first thin films of pyrochlore Y 2 V 2 O 7 on isostructural Y 2 V 2 O 7 substrates and explore the evolution of their magnetic properties down to the ultrathin limit. All films are insulating ferromagnets with transition temperatures of up to the bulk value (T c ~ 68 K) that decrease with thickness according to finite-size effects. Our films also exhibit a change in anisotropy from in-plane to out-of-plane easy axis coincident with the development of partial strain relaxation and nonzero magnetic hysteresis in an applied field. Furthermore, this evolution demonstrates the impact of strain on magnetic anisotropy and paves the way to tunable magnon topology.

Anderson, Margaret A. [Harvard University, Cambrid↗
DOE OSTI2025

Unconventional unidirectional magnetoresistance in heterostructures of a topological semimetal and a ferromagnet

Unidirectional magnetoresistance (UMR) in a bilayer heterostructure, consisting of a spin-source material and a magnetic layer, refers to a change in the longitudinal resistance on the reversal of magnetization and originates from the interaction of non-equilibrium spin accumulation and magnetization at the interface. Since the spin polarization of an electric-field-induced non-equilibrium spin accumulation in conventional spin-source materials is restricted to be in the film plane, the ensuing UMR can only respond to the in-plane component of magnetization. However, magnets with perpendicular magnetic anisotropy are highly desired for magnetic memory and spin-logic devices, whereas the electrical read-out of perpendicular magnetic anisotropy magnets through UMR is critically missing. Here, in this study, we report the discovery of an unconventional UMR in the heterostructures of a topological semimetal (WTe 2 ) and a perpendicular magnetic anisotropy ferromagnetic insulator (Cr 2 Ge 2 Te 6 ), which allows to electrically read the up and down magnetic states of the Cr 2 Ge 2 Te 6 layer through longitudinal resistance measurements.

Kao, I-Hsuan [Carnegie Mellon Univ., Pittsburgh, P↗
DOE OSTI2023

Orthorhombic distortion drives orbital ordering in the antiferromagnetic 3$d$ 1 Mott insulator PrTiO 3

The orbital, which represents the shape of the electron cloud, very often strongly influences the manifestation of various exotic phenomena, e.g., magnetism, metal-insulator transition, colossal magnetoresistance, unconventional superconductivity, etc. in solid-state systems. The observation of the antiferromagnetism in $RE$TiO 3 ($RE$ = rare-earth) series has been puzzling since the celebrated Kugel-Khomskii model of spin-orbital superexchange predicts ferromagnetism in an orbitally degenerate $d$ 1 system. Further, the existence of the orbitally ordered vs. orbital liquid phase in both antiferromagnetic and paramagnetic phase have been unsettled issues thus far. To address these longstanding questions, we investigate single crystalline film of PrTiO 3 . Our synchrotron x-ray diffraction measurements confirm the retention of bulklike orthorhombic ($D_{2h}$) symmetry in the thin film geometry. We observe similar x-ray linear dichroism signal in both paramagnetic and antiferromagnetic phase, which can be accounted by ferro-orbital ordering (FOO). While the presence of $D_{2h}$ crystal field does not guarantee lifting of orbital degeneracy always, we find it to be strong enough in these rare-earth titanates, leading to the FOO state. Thus, our work demonstrates the orthorhombic distortion is the driving force for the orbital ordering of antiferromagnetic $RE$TiO 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Upgrade of the LHC magnet interconnections thermal shielding

The about 1700 interconnections (ICs) between the Large Hadron Collider (LHC) superconducting magnets include thermal shielding at 50-75 K, providing continuity to the thermal shielding of the magnet cryostats to reduce the overall radiation heat loads to the 1.9 K helium bath of the magnets. The IC shield, made of aluminum, is conduction-cooled via a welded bridge to the thermal shield of the adjacent magnets which is actively cooled. TIG welding of these bridges made in the LHC tunnel at installation of the magnets induced a considerable risk of fire hazard due to the proximity of the multi-layer insulation of the magnet shields. A fire incident occurred in one of the machine sectors during machine installation, but fortunately with limited consequences thanks to prompt intervention of the operators. LHC is now undergoing a 2 years technical stop during which all magnet's ICs will have to be opened to consolidate the magnet electrical connections. The IC thermal shields will therefore have to be removed and re-installed after the work is completed. In order to eliminate the risk of fire hazard when re-welding, it has been decided to review the design of the IC shields, by replacing the welded bridges with a mechanical clamping which also preserves its thermal function. An additional advantage of this new solution is the ease in dismantling for maintenance, and eliminating weld-grinding operations at removal needing radioprotection measures because of material activation after long-term operation of the LHC. This paper describes the new design of the IC shields and in particular the theoretical and experimental validation of its thermal performance. Furthermore a status report of the on-going upgrade work in the LHC is given.

43 PARTICLE ACCELERATORS↗
DOE OSTI2019

DC conductivity from backreacted non-linear arcsin electrodynamics

Highlights: • This model, reproduces conductivity and Hall angle of high-T{sub c} cuprates. • It exhibits metal-insulator transition under variation of magnetic field. • Obtained transport properties for a backreacted non-linear electrodynamics model. - Abstract: We consider arcsin electrodynamics in a holographic set up along with dilatonic and axionic scalar fields. Considering backreaction of the matter fields on the geometry we study direct conductivity of the dual theory and obtain the conductivity matrix. Since obtaining an exact solution is difficult in general, we have studied several limiting cases. In particular, at the strong momentum dissipation limit, we find for hyperscaling violating geometry as the background, the resistivity and Hall coefficient will behave as ∼T and ∼T{sup 2} respectively. Then we restrict to a simpler model, where we find that the variation of the magnetic field can lead to metal–insulator transition/crossover.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Magnetic field dependent dynamics and field-driven metal-to-insulator transition of the half-filled Hubbard model: A DMFT+DMRG study

Here, we study the magnetic field-driven metal-to-insulator transition in half-filled Hubbard model on the Bethe lattice, using the dynamical mean-field theory by solving the quantum impurity problem with density-matrix renormalization group algorithm. The method enables us to obtain a high-resolution spectral densities in the presence of a magnetic field. It is found that the Kondo resonance at the Fermi level splits at relatively high magnetic field: the spin-up and -down components move away from the Fermi level and finally form a spin-polarized band insulator. By calculating the magnetization and spin susceptibility, we clarify that an applied magnetic field drives a transition from a paramagnetic metallic phase to a band insulating phase. In the weak interaction regime, the nature of the transition is continuous and captured by the Stoner's description, while in the strong interaction regime the transition is very likely to be metamagnetic, evidenced by the hysteresis curve. Furthermore, we determine the phase boundary by tracking the kink in the magnetic susceptibility, and the steplike change of the entanglement entropy and the entanglement gap closing. Interestingly, the phase boundaries determined from these two different ways are largely consistent with each other.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Non-Loudon-Fleury Raman scattering in spin-orbit coupled Mott insulators

In this work we revisit the theory of magnetic Raman scattering in Mott insulators with strong spin-orbit coupling, with a major focus on Kitaev materials. We show that Kitaev materials with bond-anisotropic interactions are generally expected to show both one- and two-magnon responses. It is further shown that, in order to obtain the correct leading contributions to the Raman vertex operator R, one must take into account the precise, photon-assisted microscopic hopping processes of the electrons and that, in systems with multiple hopping paths, R contains terms beyond those appearing in the traditional Loudon-Fleury theory. Most saliently, a numerical implementation of the revised formalism to the case of the three-dimensional hyperhoneycomb Kitaev material β– Li 2 Ir O 3 reveals that the non-Loudon-Fleury scattering terms actually dominate the Raman intensity. In addition, they induce a qualitative modification of the polarization dependence, including, e.g., the emergence of a sharp one-magnon peak at low energies, which is not expected in the traditional Loudon-Fleury theory. This peak is shown to arise from microscopic photon-assisted tunneling processes that are of similar type with the ones leading to the symmetric off-diagonal interaction Γ (known to be present in many Kitaev materials), but take the form of a bond-directional magnetic dipole term in the Raman vertex. These results are expected to apply across all Kitaev materials and mark a drastic change of paradigm for the understanding of Raman scattering in materials with strong spin-orbit coupling and multiple exchange paths.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Magnetic field frustration of the metal-insulator transition in V 2 O 3

Despite decades of efforts, the origin of metal-insulator transitions (MITs) in strongly correlated materials remains one of the main long-standing problems in condensed-matter physics. An archetypal example is V 2 O 3 , which undergoes simultaneous electronic, structural, and magnetic phase transitions. This remarkable feature highlights the many degrees of freedom at play in this material. In this work, acting solely on the magnetic degree of freedom, we reveal an anomalous feature in the electronic transport of V 2 O 3 : On cooling, the magnetoresistance changes from positive to negative values well above the MIT temperature, and shows divergent behavior at the transition. In this work, the effects are attributed to the magnetic field quenching antiferromagnetic fluctuations above the Néel temperature $T_N$, and preventing long-range antiferromagnetic ordering below $T_N$. In both cases, suppressing the antiferromagnetic ordering prevents the opening of the incipient electronic gap. This interpretation is supported by Hubbard model calculations which fully reproduce the experimental behavior. Our study sheds light on this classic problem providing a clear and physical interpretation of the nature of the metal-insulator transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Probing the low-temperature limit of the quantum anomalous Hall effect

Quantum anomalous Hall effect has been observed in magnetically doped topological insulators. However, full quantization, up until now, is limited within the sub–1 K temperature regime, although the material’s magnetic ordering temperature can go beyond 100 K. Here, we study the temperature limiting factors of the effect in Cr-doped (BiSb)2Te3 systems using both transport and magneto-optical methods. By deliberate control of the thin-film thickness and doping profile, we revealed that the low occurring temperature of quantum anomalous Hall effect in current material system is a combined result of weak ferromagnetism and trivial band involvement. Our findings may provide important insights into the search for high-temperature quantum anomalous Hall insulator and other topologically related phenomena.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2018

Dependences of the Tunnel Magnetoresistance and Spin Transfer Torque on the Sizes and Concentration of Nanoparticles in Magnetic Tunnel Junctions

Dependences of the tunnel magnetoresistance and in-plane component of the spin transfer torque on the applied voltage in a magnetic tunnel junction have been calculated in the approximation of ballistic transport of conduction electrons through an insulating layer with embedded magnetic or nonmagnetic nanoparticles. A single-barrier magnetic tunnel junction with a nanoparticle embedded in an insulator forms a double-barrier magnetic tunnel junction. It has been shown that the in-plane component of the spin transfer torque in the double-barrier magnetic tunnel junction can be higher than that in the single-barrier one at the same thickness of the insulating layer. The calculations show that nanoparticles embedded in the tunnel junction increase the probability of tunneling of electrons, create resonance conditions, and ensure the quantization of the conductance in contrast to the tunnel junction without nanoparticles. The calculated dependences of the tunnel magnetoresistance correspond to experimental data demonstrating peak anomalies and suppression of the maximum magnetoresistances at low voltages.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Transformer and an associated method thereof

A transformer having an insulation system is presented. The transformer includes a magnetic core having an opening. Also, the transformer includes a plurality of primary windings disposed extending through the opening of the magnetic core. Further, the insulation system includes a first insulation substantially encapsulating the plurality of primary windings and impregnating spaces between the plurality of primary windings, and a second insulation disposed around the first insulation, where the second insulation has at least one of a predetermined dielectric strength and a predetermined thickness configured to isolate a first voltage signal in the plurality of primary windings from the magnetic core.

Chen, Qin↗