Search NASA⌕ Search

SEARCH · Search NASA

Results for “Manuscript”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Model estimates of dissolved organic carbon, runoff, snowmelt, and snow water equivalent from 1981-2010 across the western Arctic

This dataset contains estimates of dissolved organic carbon (DOC) yield (mg C m-2), runoff (mm day-1), snow water equivalent (SWE, mm day-1), and snowmelt (mm day-1) from a simulation of the Permafrost Water Balance Model (PWBM v4). The simulation effectively quantifies snowpack accumulation and melt, runoff, and DOC leaching, and broadly capture the seasonal cycle in DOC concentration and mass loadings. Daily air temperature, precipitation, and wind speed data from the Modern-Era Retrospective Analysis for Research and Applications (MERRA) were used for meteorological forcings. The model outputs are organized by grid and day of the month in gzipped ASCII text files contained within each archived ZIP file. No special software is required to work with these data. The basin and domain information files are also ASCII text. The gridded estimates are most useful for analyses of the spatial and temporal variations in terrestrial hydrology and leachate DOC concentrations and loadings across parts of the western Arctic. A manuscript describing the data and associated analysis has been accepted for publication in Journal of Geophysical Research - Biogeosciences (Rawlins et al., 2021).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Data for: Spatial access and resource limitations control carbon mineralization in soils

This dataset contains data and code used for the paper "Spatial access and resource limitations control carbon mineralization in soils", https://doi.org/10.1016/j.soilbio.2021.108427. Core-scale soil carbon fluxes are ultimately regulated by pore-scale dynamics of substrate availability and microbial access. These are constrained by physicochemical and biochemical phenomena (e.g. spatial access and hydrologic connectivity, physical occlusion, adsorption-desorption with mineral surfaces, nutrient and resource limitations). We conducted an experiment to determine how spatial access and resource limitations influence core-scale water-soluble soil organic matter (SOM) mineralization, and how these are regulated by antecedent moisture conditions. Intact soil cores were incubated at field-moist vs. drought conditions, after which they were saturated from above (to simulate precipitation) or below (to simulate groundwater recharge). Soluble carbon (acetate) and nitrogen (nitrate) forms were added to some cores during the rewetting process to alleviate potential nutrient limitations. Soil respiration was measured during the incubation, after which pore water was extracted from the saturated soils and analyzed for water soluble organic carbon concentrations and characterization. Our results showed that carbon (C) amendments increased the cumulative carbon dioxide (CO2) evolved from the soil cores, suggesting that the soils were C-limited. Drought and rewetting increased soil respiration, and there was a greater abundance of complex aromatic molecules in pore waters sampled from these soils. This newly available substrate appeared to alleviate nutrient limitations on respiration, because there were no further respiration increases with subsequent C and N amendments. We had hypothesized that respiration would be influenced by wetting direction, as simulated precipitation would mobilize C from the surface. However, as a main effect, this response was seen only in the C-amended soils, indicating that surface-C may not have been bioavailable. At the pore scale (pore water samples), drought and the C, N amendments caused a net loss of identified molecules when the soils were rewet from below, whereas wetting from above caused a net increase in identified molecules, suggesting that fresh inputs stimulated the C-and N-limited microbial populations present deeper in the soil profile. Our experiment highlights the complex and interactive role of antecedent moisture conditions, wetting direction, and resource limitations in driving core-scale C fluxes.This dataset contains a compressed (.zip) archive of the data and R scripts used for this manuscript. The dataset includes files in .csv format, which can be accessed and processed using MS Excel or R. This archive can also be accessed on GitHub at https://github.com/kaizadp/TES_spatial_access_2021 (DOI: 10.5281/zenodo.5522938).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Soil pore network response to freeze-thaw cycles in permafrost aggregates

This dataset contains data used for the paper "Pore network response to freeze-thaw cycles in permafrost aggregates". The Related References field will be updated with a full citation when available.Climate change in Arctic landscapes may increase freeze-thaw frequency within the active layer as well as newly thawed permafrost. A highly disruptive process, freeze-thaw can deform soil pores and alter the architecture of the soil pore network with varied impacts to water transport and retention, redox conditions, and microbial activity. Our objective was to investigate how freeze-thaw cycles impacted the pore network of newly thawed permafrost aggregates to improve understanding of what type of transformations can be expected from warming Arctic landscapes. We measured the impact of freeze-thaw on pore morphology, pore throat diameter distribution, and pore connectivity with X-ray computed tomography (XCT) using six permafrost aggregates with sizes of 2.5 cm3 from a mineral soil horizon (Bw; 28-50 cm depths) in Toolik, Alaska. Freeze-thaw cycles were performed using a laboratory incubation consisting of five freeze-thaw cycles (-10˚C to 20˚C) over five weeks. Our findings indicated decreasing spatial connectivity of the pore network across all aggregates with higher frequencies of singly connected pores following freeze-thaw. Water-filled pores that were connected to the pore network decreased in volume while the overall connected pore volumetric fraction was not affected. Shifts in the pore throat diameter distribution were mostly observed in pore throats ranges of 100 microns or less with no corresponding changes to the pore shape factor of pore throats. Responses of the pore network to freeze-thaw varied with aggregate, suggesting that initial pore morphology may play a role in driving freeze-thaw response. Our research suggests that freeze-thaw alters the microenvironment of permafrost aggregates during the incipient stage of deformation following permafrost thaw, impacting soil properties and function in Arctic landscapes undergoing transition. This dataset contains a compressed (.zip) archive of the data and R scripts used for this manuscript. The dataset includes files in .csv format, which can be accessed and processed using MS Excel or R. This archive can also be accessed on GitHub at https://github.com/Erin-Rooney/XCT-freezethaw (DOI: 10.5281/zenodo.5816355).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

FTICR-MS and Biochemical Transformation Data from Global Inland River Water and Sediment Associated with: "Organic Matter Transformations are Disconnected Between Surface Water and the Hyporheic Zone"

This data package is associated with the publication "Organic Matter Transformations are Disconnected Between Surface Water and the Hyporheic Zone" submitted to Biogeosciences (Stegen et al., 2022). The study aims to understand how the diversity of OM transformations varies across surface and subsurface components of river corridors using inland surface water and sediments collected along river corridors across the contiguous United States. Sediment extracts and water samples were analyzed using ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). This dataset is comprised of one folder (WHONDR_S19S) which contains (1) a subfolder with R scripts used to process the data and to calculate biochemical transformations, (2) processed FTICR-MS data as csv files, sample collection metadata and climate data as csv files, (3) biochemical transformations profile, classifications and database as csv files, and (4) a readme file with more information regarding WHONDRS raw FTICR-MS data and processing scripts. Outside of the main folders there is a csv containing file-level metadata and a csv data dictionary defining column headers for all csv files contained in the data package. The samples were part of a WHONDRS (https://whondrs.pnnl.gov) study. The raw, unprocessed FTICR-MS data with additional data can be found at doi:10.15485/1729719 for sediments and doi:10.15485/1603775 for water. This data package contains the processed data used in the associated manuscript.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Data from: “Enabling FAIR data in Earth and environmental science with community-centric (meta)data reporting formats”

This dataset contains supplementary information for a manuscript describing the ESS-DIVE (Environmental Systems Science Data Infrastructure for a Virtual Ecosystem) data repository's community data and metadata reporting formats. The purpose of creating the ESS-DIVE reporting formats was to provide guidelines for formatting some of the diverse data types that can be found in the ESS-DIVE repository. The 6 teams of community partners who developed the reporting formats included scientists and engineers from across the Department of Energy National Lab network. Additionally, during the development process, 247 individuals representing 128 institutions provided input on the formats. The primary files in this dataset are 10 data and metadata crosswalk for ESS-DIVE’s reporting formats (all files ending in _crosswalk.csv). The crosswalks compare elements used in each of the reporting formats to other related standards and data resources (e.g., repositories, datasets, data systems). This dataset also contains additional files recommended by ESS-DIVE’s file-level metadata reporting format. Each data file has an associated dictionary (files ending in _dd.csv) which provide a brief description of each standard or data resource consulted in the data reporting format development process. The flmd.csv file describes each file contained within the dataset.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The impact of freeze-thaw history on soil carbon response to experimental freeze-thaw cycles

This dataset contains data used for the paper "The impact of freeze-thaw history on soil carbon response to experimental freeze-thaw cycles". The Related References field will be updated with a full citation when available.Freeze-thaw is a disturbance process in cold regions where permafrost soils are becoming vulnerable to temperature fluctuations above 0˚C. Freeze-thaw alters soil physical and biogeochemical properties with implications for carbon persistence and emissions in Arctic landscapes. We examined whether different freeze-thaw histories in two soil systems led to contrasting biogeochemical responses under a laboratory-controlled freeze-thaw incubation. We investigated controls on soil organic matter (SOM) composition through Fourier-transform ion cyclotron resonance mass spectroscopy (FT-ICR-MS) to identify nominal carbon oxidation states and relative abundances of aliphatic-type carbon molecules in both surface and subsurface soils. Soil cores (~ 60 cm-depth) were sampled from two sites in Alaskan permafrost landscapes with different in situ freeze-thaw characteristics: Healy (>40 freeze-thaw cycles annually) and Toolik (<150 freeze-thaw cycles annually). FT-ICR-MS was coupled with in situ temperature data and soil properties (i.e., soil texture, mineralogy) to assess (1) differences in SOM composition associated with previous freeze-thaw history and (2) sensitivity to experimental freeze-thaw in the extracted cores. Control (freeze-only) samples showed greater carbon oxidation in Healy soils compared with Toolik, even in lower mineral horizons where freeze-thaw history was comparable across both sites. Healy showed the most loss of carbon compounds following experimental freeze-thaw in the lower mineral depths, including a decrease in aliphatics. Toolik soils responded more slowly to freeze-thaw as shown by intermediary carbon oxidation distributed across multiple carbon compound classes. Variations in the response of permafrost carbon chemistry to freeze-thaw is an important factor for predicting changes in soil function as permafrost thaws in high northern latitudes.This dataset contains a compressed (.zip) archive of the data and R scripts used for this manuscript. The dataset includes files in .csv format, which can be accessed and processed using MS Excel or R. This archive can also be accessed on GitHub at https://github.com/Erin-Rooney/FTC-FTICR (DOI 10.5281/zenodo.6533064).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Water Quality Parameters at the Elkhorn Slough National Estuarine Research Reserve (ESNERR)

The following dataset includes water quality and meteorological forcing data between 2003 and 2019 across four Elkhorn Slough National Estuarine Research Reserve (ESNERR) stations. The data are monthly averaged and include orthophosphate, ammonium, Nitrite, Nitrate, Nitrite + Nitrate, Chlorophyll, Temperature of water, Specific Conductance, Salinity, Dissolved Oxygen, Air Temperature and Precipitation. The data were compiled for wavelet and other statistical analyses. All data included herein are associated with the following manuscript: Venkatesh*, S., B. Arora, D. Dwivedi, S. Vezhaperambu, M. V. Ramesh (2021), Temporal Variability of Water Quality Parameters at the Elkhorn Slough Estuary using Wavelets, IEEE Proceedings on 6th International Conference for Convergence in Technology, DOI:10.1109/I2CT51068.2021.9418159.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Data for: Patel et al. Carbon flux estimates are sensitive to data source: A comparison of field and lab temperature sensitivity data

This dataset contains data and code used for the paper "Carbon flux estimates are sensitive to data source: A comparison of field and lab temperature sensitivity data" [DOI COMING SOON]A large literature exists on mechanisms driving soil production of the greenhouse gases CO2 and CH4. Measurements of these gases’ fluxes are often performed using closed-chamber incubations in the laboratory or in situ, i.e., in the field. Although it is common knowledge that measurements obtained through field studies vs. laboratory incubations can diverge because of the vastly different conditions of these environments, few studies have systematically examined these patterns. It is crucial to understand the magnitude and reasons for any differences, as these data are used to parametrize and benchmark ecosystem- to global-scale models, which are then susceptible to the biases of the source data. Here, we specifically examine how greenhouse gas measurements may be influenced by whether the measurement/incubation was conducted in the field vs. laboratory, focusing on CO2 and CH4 measurements. We use Q10 of greenhouse gas flux (temperature sensitivity) for our analyses, because of the ubiquity of this metric in biological and Earth system sciences and its importance to many modeling frameworks. We predicted that laboratory measurements would be less variable, but also less representative of true field conditions. However, there was greater variability in the Q10 values calculated from lab-based measurements of CO2 fluxes, because lab experiments explore extremes rarely seen in situ, and reflect the physical and chemical disturbances occurring during sampling, transport, and incubation. Overall, respiration Q10 values were significantly greater in laboratory incubations (mean = 4.19) than field measurements (mean = 3.05), with strong influences of incubation temperature and climate region/biome. However, this was in part because field measurements typically represent total respiration (Rs), whereas lab incubations typically represent heterotrophic respiration (Rh), making direct comparisons difficult to interpret. Focusing only on Rh-derived Q10, these values showed almost identical distributions across laboratory (n = 1110) and field (n = 581) experiments, providing strong support for using the former as an experimental proxy for the latter, although we caution that geographic biases in the extant data make this conclusion tentative. Due to a smaller sample size of CH4 Q10 data, we were unable to perform a comparable robust analysis, but we expect similar interactions with soil temperature, moisture, and environmental/climatic variables. Our results here suggest the need for more concerted efforts to document and standardize these data, including sample and site metadata. This dataset contains a compressed (.zip) archive of the data and R scripts used for this manuscript. The dataset includes files in .csv format, which can be accessed and processed using MS Excel or R. This archive can also be accessed on GitHub at https://github.com/kaizadp/field_lab_q10 (DOI: 10.5281/zenodo.7106554).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Ectomycorrhizal effects on decomposition are highly dependent on fungal traits, climate, and litter properties: A model-based assessment. Dataset.

To simulate the effects of mycorrhizal fungi on soil organic matter cycling, we incorporated mycorrhizal processes into the Carbon, Organisms, Rhizosphere, and Protection in the Soil Environment (CORPSE) model to develop a new soil model Myco-CORPSE. The new model was calibrated and evaluated against soil measurements taken at temperate forests in New Hampshire (NH) and Georgia (GA). A series of scenario analysis were also conducted to explore the conditions under which ectomycorrhizal (ECM) N acquisition processes can induce different soil C accumulation in ECM systems compared to arbuscular (AM) systems.In this data package, we included:-The Python codes of the standard Myco-CORPSE model we developed: "Standard Myco_CORPSE python codes.zip". The main program is the "gradient_sim.py" which calculates the bulk soil microbes and CN content along a user defined gradient of clay, soil temperature, soil moisture and mycorrhizal dominance, and relies on two subprograms "CORPSE_deriv.py" and "CORPSE_integrate.py". "CORPSE_deriv.py" calculated the changes in all simulated soil stock within every time step and "CORPSE_integrate.py" integrate the changes in all simulated soil stock within simulated time period. The program "Plot.py" is used to plot the major outputs produced by the main program "gradient_sim.py".-The modified Python codes of Myco-CORPSE models with site-level environmental inputs (in NH and GA) used to conduct simulations in NH and GA sites: "NH_GA model simulations.zip". -The Python codes used to evaluate the Myco-CORPSE simulation outputs in NH and GA sites against site-level measurements: "Plot NH_GA simulation against measurements.zip". It includes both the evaluation Python code, the model outputs on NH and GA sites, and the measured soil properties in both sites.-The modified Python codes of Myco-CORPSE models "Scenario analysis_model simulations.zip" that is used to conduct scenario analysis of how different litter properties, mycorrhizal fungal traits, climate, and seasonal variation in temperature and vegetation phenology impact the mycorrhizal effects on soil CN properties. The sub file folder "Scenario analysis_litter traits" contains the codes for scenario analysis of different litter properties; The sub file folder "Scenario analysis_ECM types" contains the codes for scenario analysis of different ECM fungal traits; The sub file folder "Scenario analysis_climate&seasonality" contains the codes for scenario analysis of different climate and seasonalities;-"Scenario analysis_model results and plotting codes.zip" contains all the output files from the the scenario analysis of Myco-CORPSE model as described above and the plotting codes used to the generate the heatmaps and scatterplots shown in the manuscript "Ectomycorrhizal effects on decomposition are highly dependent on fungal traits, climate, and litter properties: A model-based assessment"The majority of the model outputs did not have specific geographic information or temporal coverage because the analysis we conducted are mainly hypothetical model simulations. We only provided geographic description, coordinates and temporal coverage for those soil measurements which we used for model evaluations (included in the "Plot NH_GA simulation against measurements.zip").

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Topography and canopy cover influence soil organic carbon composition and distribution across a forested hillslope in the discontinuous permafrost zone

This dataset contains data used for the paper "Topography and canopy cover influence soil organic carbon composition and distribution across a forested hillslope in the discontinuous permafrost zone". The Related References field will be updated with a full citation when available. Topography and canopy cover influence ground temperature in warming permafrost landscapes, yet soil temperature heterogeneity introduced by meso-topographic slope positions, microtopographic differences in vegetation cover, and the subsequent impact of contrasting temperature conditions to soil organic carbon (SOC) dynamics are understudied. Buffering of permafrost-affected soils against warming air temperatures in boreal forests can reflect surface soil characteristics (e.g., thickness of organic material) as well as the degree and type of canopy cover (e.g., open cover vs closed cover). Both landscape and soil properties interact to determine meso- and micro-scale heterogeneity of ground warming. We sampled a hillslope catena transect in a discontinuous permafrost zone near Fairbanks, Alaska to test the small-scale (1 to 3 meter) impacts of slope position and cover type on soil organic matter composition. Mineral active layer samples were collected from backslope, low backslope, and footslope positions at depths spanning 19 to 60 cm. We examined soil mineralogical composition, soil moisture, total carbon and nitrogen content, and organic mat thickness in conjunction with an assessment of SOC composition using Fourier-transform ion Cyclotron Resonance Mass Spectrometry (FT-ICR-MS). Soils in the footslope position had a higher relative contribution of lignin-like compounds while backslope soils had more aliphatic and condensed aromatic compounds as determined by FT-ICR-MS. The effect of open versus closed tree canopy cover varied with slope position. On the backslope, we found higher oxidation of molecules under open cover compared with closed cover, indicating an effect of warmer soil temperature on decomposition. Little to no effect of canopy was observed for soils at the footslope position, which we attributed, in part, to the strong impact of soil moisture content in SOC dynamics in the water-gathering footslope position. The thin organic mat under open cover on the backslope position may have contributed to differences in soil temperature and thus SOC oxidation under open and closed canopy. Here, the thinner organic mat did not appear to buffer the underlying soil against warm season air temperatures and thus increased SOC decomposition as indicated by higher oxidation of SOC molecules and a lower contribution of simple molecules under open cover compared with the closed canopy sites. Our findings suggest that the role of canopy cover in SOC dynamics varies as a function of landscape position and soil properties, namely organic mat thickness and soil moisture. Condition-specific heterogeneity of SOC composition under open and closed canopy cover highlights the protective effect of canopy cover for soils on backslope positions. This dataset contains a compressed (.zip) archive of the data and R scripts used for this manuscript. The dataset includes files in .csv format, which can be accessed and processed using MS Excel or R. This archive can also be accessed on GitHub at https://github.com/Erin-Rooney/Y1_fairbanks (DOI: 10.5281/zenodo.8071247).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Model Data for the Mesh Convergence Study Demonstrating Benefits of Mixed-polyhedral Mesh in Integrated Hydrology Simulations

This archived model data is related to a study introducing a unique method that employs a stream-aligned mixed-polyhedral mesh to effectively and accurately represent river valleys, stream corridors, and narrow engineered channels in integrated hydrology simulations. The study finds that utilizing stream-aligned mixed-polyhedral meshes in integrated hydrology simulations achieves accuracy on par with a finely refined TIN-based mesh while markedly diminishing computational costs. This archive contains scripts and data files needed to generate the ATS model input, including mesh and ATS input files, for all mesh scenarios using the Watershed Workflow package. Additionally, this archive also provides key outputs from the model simulations that are used in the analysis and post-processing scripts to reproduce figures in the manuscript. The Watershed Workflow package is implemented in Python3. The Jupyter notebooks can be executed through multiple open-source tools, for example, Anaconda Jupyter Lab, VS Studio Code, etc. Other data files include CSV and HDF5 files, which can be read through Python scripts. The input files for the ATS model, open-source integrated hydrology, and transport model are in XML format and can be edited in any commonly used text editors.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Improving the Estimation of the Atmospheric Water Vapor Pressure Using Interpretable Long Short-Term Memory Networks: Dataset, Python code, and trained models

Atmospheric water vapor pressure is an essential meteorological control on land surface and hydrologic processes. It is not as frequently observed as other meteorologic conditions, but often inferred through the August–Roche–Magnus formula by simply assuming dew point and daily minimum temperatures are equivalent or by empirically correlating the two temperatures using an aridity correction. The performance of both methods varies considerably across different regions and during different time periods; obtaining consistently accurate estimates across space and time remains a great challenge. We applied an interpretable Long Short-Term Memory (iLSTM) network conditioned on static, location specific attributes to estimate daily vapor pressure for 83 FLUXNET sites in the United States and Canada. This data package includes all raw data of the 83 FLUXNET sites, input data for model training/validation/test, trained models and results, and python codes for the manuscript "Improving the Estimation of the Atmospheric Water Vapor Pressure Using an Interpretable Long Short-term Memory Network". Specifically, it consists of five parts. - First, "1_Daymet_data_83sites.zip" includes raw data downloaded from Daymet for the 83 sites used in the paper according to their longitude and latitude, in which vapor pressure is used. It also includes a pre-processed CSV data file combining all data from the 83 sites which is specifically used for the paper. - Second, "2_Fluxnet2015_data_83sites.zip" includes raw half hourly data of the 83 sites downloaded from FLUXNET2015 data portal, pre-processed daily data of the 83 sites, a CSV file including combined pre-processed daily data of the 83 sites, and a CSV file including the information (site ID, site name, latitude, longitude, data available period) of the 83 sites. - Third, "3_MODIS_LAI_data_83sites_raw.zip" includes raw leaf area index (LAI) data downloaded from the AppEEARs data portal. - Fourth, "4_Scripts.zip" includes all scripts related to model training and post-processing of a trained model, and a jupyter notebook showing an example for model post-processing. Two typo errors in files titled "run2get_args.py" and "postprocess.py" were corrected on March 27, 2024 to avoid confusions. - Finally, "Trained_models_and_results.zip" includes three folders and three files with suffix ".npy", and each folder corresponds to one file with suffix ".npy" with the same title. Each of the three folders include all trained models associated with one iLSTM model configuration (35 models for each configuration, details are described in the paper). Each file with suffix ".npy" includes the post-processed results of the corresponding 35 models under one iLSTM model configuration.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Data and Scripts associated with “Lambda-PFLOTRAN: Workflow for Incorporating Organic Matter Chemistry Informed by Ultra High Resolution Mass Spectrometry into Biogeochemical Modeling.”

This data package is associated with the publication “Lambda-PFLOTRAN: Workflow for Incorporating Organic Matter Chemistry Informed by Ultra High Resolution Mass Spectrometry into Biogeochemical Modeling” submitted to Geoscientific Model Development (Muller et al., 2024). In this manuscript, organic matter chemistry and thermodynamics are directly connected to reactive transport simulators through the newly developed Lambda-PFLOTRAN (Parallel Reactive Flow and Transport model) workflow tool that succinctly incorporates organic matter chemistry data generated from Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) into reaction networks to simulate aerobic respiration of the organic matter and the resulting biogeochemistry. Lambda-PFLOTRAN is a python-based workflow, executed through a Jupyter Notebook interface, that digests raw FTICR-MS data, develops a representative reaction network based on substrate-explicit thermodynamic modeling (also termed lambda modeling due to its key thermodynamic parameter λ used therein), and completes a biogeochemical simulation with the open source, reactive flow, and transport code PFLOTRAN. This data package contains Jupyter Notebook based workflows for two test cases for running biogeochemical simulations of organic matter oxidation identified by FTICR-MS. It contains four primary folders (workflow, data, src, and analysis), a file-level metadata file (Muller_2024_Lambda_PFLOTRAN_Manuscript_Data_Package_flmd.csv) that lists all the files contained in this data package with a short description of each, and a data dictionary (Muller_2024_Lambda_PFLOTRAN_Manuscript_Data_Package_dd.csv) file that describes the tabular column headers. The ‘workflow’ folder contains the Jupyter Notebook based workflows for running the lambda analysis, PFLOTRAN simulation, sensitivity analysis and parameter estimation. The ‘data’ folder contains the FTICR-MS data, initial conditions, and incubation data for test cases 1 and 2 in folders titled ‘WHONDRS’ and ‘Colloids’, respectively. The data folder also has a ‘Database’ folder containing a reaction network for bulk organic matter (assumed to be CH2O) and a general database for PFLOTRAN (hanford_rxn_network). The CH2O reaction network defines bulk organic matter oxidation. Biogeochemical simulations are completed for both the lambda binned organic matter and bulk organic matter reaction networks. The ‘hanford_rxn_network’ database includes information required for PFLTORAN simulations including ion size, molar mass, and charge of the aqueous species, gases, and minerals phases. The ‘src’ folder contains python source codes for performing lambda analysis, PFLOTRAN simulation, sensitivity analysis and parameter estimation. The ‘analysis’ folder contains outputs from the test cases 1 and 2 including lambda analysis, PFLOTRAN runs and the calibration results.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Modeled estimates of permafrost hydrology and related fields for pan-Arctic region over the period 1980-2100

This dataset contains gridded estimates of total runoff (mm/day); subsurface runoff (mm/day); snow water equivalent (SWE, mm/day); vertical upward water flux of combined surface evaporation, evapotranspiration, and snow sublimation (mm/day); and soil temperature (C) across the pan-Arctic basin from simulations of the Permafrost Water Balance Model (PWBM v4). These data were generated to allow researchers to advance understanding of the changes unfolding in the Arctic's terrestrial water cycle under the influences of climate warming, hydrological cycle intensification, and permafrost thaw. The dataset will enable researchers to address important questions spanning multiple disciplines. For example, how will rising river flows exported to the coast impact critical zone ecosystems, near-shore ice dynamics, and ocean biogeochemical processes. Spatial resolution is 25x25 km with N=39926 grid cells spanning the domain. Three forcing datasets were used to drive simulations at an implicit daily time step over the period 1980-2100. Daily air temperature, precipitation, and wind speed data from the WATCH Forcing Data methodology applied to ERA5 reanalysis (W5E5) were used for meteorological forcings over the period 1980-2019. Simulations for the period 1980-2100 used meteorological data from two global climate models; IPSL-CM6A-LR and MPI-ESM1-2-HR. The PWBM hydrological outputs are organized by grid and month in gzipped ASCII text files within each archived tar file. Soil temperature is organized by grid cell and day of year from DOY 205 to DOY 260. No special software is required to work with these data. The package contains spatial domain and river basin information files. These data are most useful for analyses of the spatial and temporal variations in terrestrial hydrology and soil thermal dynamics. A manuscript describing the model simulations and associated analysis has been accepted for publication in The Cryosphere (Rawlins and Karmalkar, 2024).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Hydrological control of chemical weathering and rock-carbon fluxes: East River, Colorado

This data package is used in the manuscript entitled “Hydrological control of chemical weathering and rock-carbon fluxes”. The field study was conducted in a lower montane hillslope of the East River watershed, underlain by Mancos Shale, within the lower 140 m section of a transect that extends nearly 1 km to its local peak. The data in this package, in CSV file format, were collected from Fall 2016 to fall 2021, including depth-resolved dynamic water table depths, subsurface water fluxes, solid phase (soil to bedrock) chemical compositions, geochemical properties of porewater and pore-gas, including radio carbon concentrations. The detailed methods of field studies, laboratory chemical analyses, and calculations are described in the Methods section and in the dataset file: Wan_et_al_Methods.pdf. The dataset additionally includes a file-level metadata (flmd.csv) file that lists each file contained in the dataset with associated metadata; and a data dictionary (dd.csv) file that contains column/row headers used throughout the files along with a definition, units, and data type.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Data for: Time to anoxia: Observations and predictions of oxygen drawdown following coastal flood events

This dataset contains data and code associated with the paper Patel et al. "Time to anoxia: Observations and predictions of oxygen drawdown following coastal flood events".The coastal terrestrial-aquatic interface (TAI) is a highly dynamic system characterized by strong physical, chemical, and biological gradients. In particular, shifting soil redox conditions and consumption of terminal electron acceptors, due in part to dynamic hydrologic conditions, is a strong driver of carbon availability and transformations across TAIs. However, while redox dynamics are well described, our ability to quantitatively forecast rates of oxic to anoxic shifts in soils with different characteristics and inundation regimes is limited. We integrated field measurements, laboratory incubations, and model simulations to improve mechanistic understanding of oxygen consumption dynamics in coastal soils. Continuous in situ monitoring unexpectedly revealed that flooding caused temporary spikes in subsurface dissolved oxygen followed by rapid consumption in the wetlands. To further investigate these mechanisms in a controlled setting, we performed laboratory incubations using surface and subsurface soils from a TAI gradient (defined here as upland forest to transitional forest to wetland) in Western Lake Erie to measure oxygen consumption rates in TAI soils during flood events. In our experiments, wetland soils reached anoxia the fastest, in ∼ 9 h on average, whereas upland soils turned anoxic in ∼ 18 h. Subsurface upland soils did not turn anoxic even after two weeks of saturation in the lab, and their oxygen consumption patterns suggested carbon and/or nutrient limitation. These results are consistent with in-situ groundwater redox and oxygen measurements in the field, where wetland soils exhibited the highest rates of oxygen consumption along the TAI. Model simulations of oxygen consumption suggested that oxygen consumption had stronger abiotic controls in wetland soils but stronger biotic controls in upland soils, providing a useful framework for future incubation experiments. Microbial activity is a strong driver of oxygen consumption in TAI soils, although it is constrained by the availability of dissolved carbon in subsurface soils.This dataset contains a compressed (.zip) archive of the data and R scripts used for this manuscript. The dataset includes files in .csv format, which can be accessed and processed using MS Excel or R. This archive can also be accessed on GitHub at https://github.com/COMPASS-DOE/cmps-time_to_anoxia (DOI: 10.5281/zenodo.10815374).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Model output from simulations of manganese-carbon interactions in temperate forest soil profiles

This archive contains model output, code, and scripts for simulations of coupled manganese-carbon cycling in temperate forest soil profiles. These model results were generated as part of a study investigating how manganese availability influences soil organic carbon stocks and demonstrating a new model framework for coupling carbon and manganese cycling. The simulations were in support of a manuscript: "Modeling interactive effects of manganese bioavailability, nitrogen deposition, and warming on soil carbon storage." The study addresses the research questions: How does Mn bioavailability, as driven by subsurface mineral properties, pH, and redox status, affect temperate forest soil organic carbon and litter carbon stocks?How is the relationship between Mn bioavailability and carbon cycling affected by changes in temperature and nitrogen deposition?"Model simulations were conducted in a reactive transport modeling framework using PFLOTRAN coupled to python. Multiple model simulations testing different Mn-bearing mineral solubilities, hydrological patterns, nitrogen deposition rates, and temperatures are included. Soil properties, including total and exchangeable Mn concentrations, are based on values reported for the Susquehanna Shale Hills Critical Zone Observatory (SSHCZO), a temperate forested watershed in central Pennsylvania, U.S.A where Mn cycling through vegetation has been documented.File formats include netCDF (.nc), python script (.py), shell script (.sh), plain text PFLOTRAN input file (.in), and plain text PFLOTRAN database file (.dat), and gzipped tar archive (tar.gz).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Water chemistry in flume channel and hyporheic zone (i.e., porewater) associated with: “Rethinking Aerobic Respiration in the Hyporheic Zone Under Variation in Carbon and Nitrogen Stoichiometry”

Dissolved oxygen (DO), total organic carbon (TOC), total nitrogen (TN), molecular data for organic matter, and biochemical reactions for surface water and porewater (i.e., hyporheic zone) collected from a water recirculating flume located at the University of Texas, Austin. The flume contained real river water from Lower Colorado River(Austin, TX) and clean sand. Hyporheic exchange in the flume was induced through The study aims to understand relationships between aerobic metabolism of organic matter and molecular characteristics of organic matter, such as thermodynamic signature and nitrogen content, through the extent of the hyporheic zone at 10 cm- resolution, and through time. During the experiment, organic matter (dry leaves) was added to the flume and removed after 24 hours. The water samples were collected before the addition of leaves, at the time of removal of leaves, and at hour 72. The water samples were analyzed using ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) and total organic carbon (TOC) and total nitrogen (TN) analysis. Dissolved oxygen content throughout the surface water and the hyporheic zone of the flume was measured with a large planar optode. This data package is associated with the publication ’ Rethinking Aerobic Respiration in the Hyporheic Zone Under Variation in Carbon and Nitrogen Stoichiometry’ published in Environmental Science and Technology (Turețcaia et al., 2023 https://doi.org/10.1021/acs.est.3c04765). The dataset is comprised of five folders (1) Diss_O2_pic, (2) input_files (3) output_files; (4) python_code; and (5) R_code . Diss_O2_pic contains siximages of dissolved oxygen distribution in a bedform at hours 0, 24, and 72 of the experiment conducted in a large recirculation flume. Images are in separate R and G channels (i.e., RGB). The input_files contains (1) a csv file with FTICR peaks identified within each sample, (2) a csv file with molecular information pertinent to FTICR data with Gibbs free energy calculations adjusted for environmental temperature, (3) a csv file containing concentrations of non-purgeable organic carbon measured throughout the experiment , (4) a csv file containing concentrations of total nitrogen measured throughout the experiment, (5) a csv file containing total biochemical reactions (i.e., transformations) identified in the dataset, (6) a csv containing transformation profiles, and (7) a csv file containing transformations with formulas, and (8) a jpg file with schematic representation of locations for sample collection. The output_files contains (1) and xlsx file containing percent biochemical reactions containing nitrogen identified across all 39 sample, (2) a csv file of merged FTICR data and molecular information files, (3) a csv files containing average Gibbs free energy within sampling domains and at each sampling location, (4) a csv file with average concentrations of dissolved oxygen across sampling locations at hour 0, (5) a csv file with average concentrations of dissolved oxygen across sampling locations at hour 24, (6) a csv file with average concentrations of dissolved oxygen across sampling locations at hour 72, (7) a csv file with percent chemical classes identified across sampling locations at hour 0, (8) a csv file with percent chemical classes identified across sampling locations at hour 24, (9) a csv file with percent chemical classes identified across sampling locations at hour 72, and (10) a csv file containing percent nitrogen containing biochemical reactions identified across sampling locations at hours 0, 24, and 72. The python_code contains seven ipynb files which are Jupyter Notebooks used for data analysis and figures generation. The R_code contains 3 R files with R code used for data analysis and figures generation. This data package contains the processed data used in the associated manuscript. This data has not been previously published.

54 ENVIRONMENTAL SCIENCES↗