Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modulation formats”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

The formation of giant plasma membrane vesicles enable new insights into the regulation of cholesterol efflux

Highlights: • Giant plasma membrane vesicles serve as a means to monitor cell surface cholesterol. • Increase in cholesterol efflux enhances giant plasma membrane vesicle formation. • Microtubule stabilization and acetylation promote cholesterol efflux in NPC disease. • Actin dynamics and Arl4c modulate lipid efflux and giant plasma membrane vesicles. Aberrant cellular cholesterol accumulation contributes to the pathophysiology of many diseases including neurodegenerative disorders such as Niemann-Pick Type C (NPC) and Alzheimer's Disease{sup 1–4}. Many aspects of cholesterol efflux from cells remain elusive. Here we describe the utility of cholesterol-rich giant plasma membrane vesicles (GPMVs) as a means to monitor cholesterol that is translocated to the plasma membrane for secretion. We demonstrate that small molecules known to enhance lipid efflux, including those in clinical trials for lipid storage disorders, enhance this GPMV formation. Conversely, pharmacological inhibition of cholesterol efflux blocks GPMV formation. We show that microtubule stabilization via paclitaxel treatment and increased tubulin acetylation via HDAC6 inhibition promotes the formation of GPMVs with concomitant reduction in cellular cholesterol in a cell model of NPC disease. The pan-deacetylase inhibitor panobinostat, which has been shown to reduce the severity of cholesterol storage in NPC, elicited a similar response. Further, the disruption of actin polymerization inhibits the formation of GPMVs, whereas the small GTP-binding protein Arl4c promotes actin remodeling at sites overlapping with GPMV formation. Thus, monitoring the formation of GPMVs provides a new avenue to better understand diseases whose pathology may be sensitive to alterations in cellular cholesterol.

60 APPLIED LIFE SCIENCES↗

Engineering Thermally Resilient and Kinetically Active Reversible Protonic Ceramic Cells via Interfacial Design

Achieving concurrent fast electrode kinetics and long-term thermo-mechanical durability remains a critical challenge for reversible protonic ceramic electrochemical cells (R-PCECs). Herein, we report an interfacial engineering strategy that integrates a perovs.kite-type PrBaRu0.1Co1.9O5+δ (PBRC) nanoparticle layer onto a PrBa0.5Sr0.5Co1.5Fe0.5O5+δ (PBSCF) substrate (PBRC-PBSCF), together with a modified pellet-assisted sintering approach to fabricate dense BaZr0.4Ce0.4Y0.1Yb0.1O3-δ (BZCYYb4411) electrolytes. The in situ reconstructed heterointerface enhances oxygen reduction/evolution reaction (ORR/OER) kinetics, promotes H2O adsorption/dissociation, and improves steam tolerance, as verified by electrochemical measurements and interfacial microstructural analyses. Density functional theory reveals that Ru-induced electronic modulation at the PBRC-PBSCF interface lowers the energy of oxygen vacancy formation and optimizes the position of the O 2p band center, thereby accelerating oxygen redox kinetics and stabilizing the interface. The resulting R-PCECs deliver an excellent peak power density of 1.112 W cm−2 and an electrolysis current density of −1.257 A cm−2 at 1.3 V in 3% H2O wet air at 600°C, with a reasonable faradaic efficiency. Furthermore, the cells demonstrate excellent stability, sustaining 100 h of thermal cycling (400–600°C, 200°C h−1) in both fuel cell and electrolysis modes, with 600 h of stability in electrolysis mode (600°C, −0.5 to −2 A cm−2).

30 DIRECT ENERGY CONVERSION↗

Similar local order in disordered fluorite and aperiodic pyrochlore structures

A major challenge to understanding the response of materials to extreme environments ( e.g. , nuclear fuels/waste forms and fusion materials) is to unravel the processes by which a material can incorporate atomic-scale disorder, and at the same time, remain crystalline. While it has long been known that all condensed matter, even liquids and glasses, possess short-range order, the relation between fully-ordered, disordered, and aperiodic structures over multiple length scales is not well understood. For example, when defects are introduced ( via pressure or irradiation) into materials adopting the pyrochlore structure, these complex oxides either disorder over specific crystallographic sites, remaining crystalline, or become aperiodic. Here we present neutron total scattering results characterizing the irradiation response of two pyrochlores, one that is known to disorder (Er 2 Sn 2 O 7 ) and the other to amorphize (Dy 2 Sn 2 O 7 ) under ion irradiation. The results demonstrate that in both cases, the local pyrochlore structure is transformed into similar short range configurations that are best fit by the orthorhombic weberite structure, even though the two compositions have distinctly different structures, aperiodic vs. disordered-crystalline, at longer length scales. Thus, a material's resistance to amorphization may not depend primarily on local defect formation energies, but rather on the structure's compatibility with meso-scale modulations of the local order in a way that maintains long-range periodicity.

36 MATERIALS SCIENCE↗

Statins and angiogenesis: Is it about connections?

Statins, inhibitors of 3-hydroxy-3-methyl-glutaryl-coenzyme A reductase, have been shown to induce both angiogenic and angiostatic responses. We attempted to resolve this controversy by studying the effects of two different statins, rosuvastatin and simvastatin, in two different assay systems. In the matrigel angiogenesis assay, both statins enhanced tube formation by human umbilical vein endothelial cells (HUVECs, p < 0.01 vs. control). In the ex vivo mouse aortic ring sprouting assay, both statins virtually abolished new vessel formation (p < 0.01). As a basic difference between the two models of angiogenesis is dispersed state of endothelial cells vs. compact monolayer, we analyzed influence of statins on endothelial junction proteins. RT-PCR analysis and cytoimmunostaining of HUVECs treated with simvastatin revealed increased expression of VE-cadherin (p < 0.05). The blockade of VE-cadherin with a specific antibody reversed simvastatin-induced tube formation (p < 0.002). These data suggest that statins through VE-cadherin stimulation modulate cell-cell adhesion and diminish the ability of cells to proliferate and migrate. The observations of reduced angiogenesis in the intact vessel may relate to anti-atherosclerotic and anti-cancer effects of statins, and provide a feasible explanation for conflicting data under different experimental conditions.

60 APPLIED LIFE SCIENCES↗

Tailoring Crosslinks through Time─A Paradigm for Tough Hydrogels

The multidisciplinary applications of hydrogels have motivated a thorough exploration of the relationship between their structural and mechanical properties, i.e., spatial structure–function relationships, with particular regard to strength and toughness. While this approach has driven fundamental advancements in the design of robust hydrogel structures, further complementary perspectives are needed to enable holistic, rational design schemes that integrate considerations such as fabrication and advanced functions like response and adaptation. To these ends, this review focuses on the dynamics of temporal-function relationships and their fundamental bases in order to highlight how the dynamic regulation of polymer interactions programs: 1) polymer assembly and material structure; 2) response to deformation and fracture behavior; 3) dynamic modulation of properties and structural remodeling/self-healing. Here, by exploring this intersection of hydrogel formation, function, and remodeling, this review seeks to shed light on the fundamental relationship between molecular structure, material assembly, and performance in order to connect the emerging area of bioinspired materials processing with tough hydrogel design, and further provides a lasting inspiration and impetus for future hydrogel development that enables valuable scientific and technological advancements.

36 MATERIALS SCIENCE↗

Hydrogen-Bond-Driven Chemical Separations: Elucidating the Interfacial Steps of Self-Assembly in Solvent Extraction

Chemical separations, particularly liquid extractions, are pervasive in academic and industrial laboratories, yet a mechanistic understanding of the events governing their function are obscured by interfacial phenomena that are notoriously difficult to measure. In this work, we investigate the fundamental steps of ligand self-assembly as driven by changes in the interfacial H-bonding network using vibrational sum frequency generation. Our results show how the bulk pH modulates the interfacial structure of extractants at the buried oil/aqueous interface via the formation of unique H-bonding networks that order and bridge ligands to produce self-assembled aggregates. These extended H-bonded structures are key to the subsequent extraction of Co2+ from the aqueous phase in promoting micelle formation and subsequent ejection of the said micelle into the oil phase. The combination of static and time-resolved measurements reveals the events underlying complexities of liquid extractions at high [Co2+]:[ligand] ratios by showing an evolution of interfacially assembled structures that are readily tuned on a chemical basis by altering the compositions of the aqueous phase. The results of this work point to new principles to design-applied separations through the manipulation of surface charge, electrostatic screening, and the associated H-bonding networks that arise at the interface to facilitate organization and subsequent extraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Vibrational Probe of Electrical Doping in N2200 and Fermi-Level Alignment at Polymer Cathode/Metal Cocatalyst/Electrolyte Junctions

Hybrid (photo)­cathodes consisting of conjugated polymer and hydrogen evolution reaction (HER) cocatalysts are an emerging platform for low-cost solar fuel generation. Poly­{[N,N′-bis­(2-octyldodecyl)-naphthalene-1,4,5,8-bis­(dicarboximide)-2,6-diyl]-alt-5,5′-(2,2′-bithiophene)}, known as P­(NDI2OD-T2) or N2200, is a promising electron accepting material for bulk heterojunction photocathodes. Unlike inorganic (photo)­electrodes, much less is known about the energetic alignment of conjugated polymer electrode/metal/electrolyte junctions. Here, in this work, we investigate the electrical doping behavior in an N2200 cathode and its Fermi-level alignment with gold nanoparticles, which is used here as a model for the hydrogen evolution metal cocatalyst. Through UV/visible, Raman, and attenuated total-reflectance infrared spectroelectrochemistry, we observe the impact of electrical doping on the vibrational frequencies of neutral, anion, and dianion species in N2200, which suggests that electron density changes within the corresponding naphthalene-diimide (NDI) units. Upon one-electron reduction, the $C=O$ stretching frequency of the NDI anion unit (polaron) shows a red shift by ∼ 68 cm –1 . Additionally, the $C=O$ stretching frequency of neutral units in the doped N2200 shows a minor red shift of ∼ 5 cm –1 , suggesting charge transfer from neighboring polaron units. Surface-enhanced Raman spectroscopy measurements of a gold nanoparticle-functionalized N2200 electrode revealed that the Au Fermi level only shifts with that of N2200 upon polaron formation; thus, the formal potential of polymer polaron formation determines the behavior of the catalyst Fermi level, which we posit will modulate reaction capability. This mechanistic study provides a new approach for understanding the nanometer-scale energetics at the conjugated polymer/cocatalyst junction and provides critical insights for the future design of HER (photo)­cathodes.

charge transfer↗

Structure of Charge Density Waves in La1.875Ba0.125CuO4

Although charge-density wave (CDW) correlations exist in several families of cuprate superconductors, they exhibit substantial variation in CDW wavevector and correlation length, indicating a key role for CDW-lattice interactions. We investigated this interaction in La1.875Ba0.125CuO4 using single crystal x-ray diffraction to collect a large number of CDW peak intensities, and determined the Cu and La/Ba atomic distortions induced by the formation of CDW order. Within the CuO2 planes, the distortions involve a periodic modulation of the Cu-Cu spacing along the direction of the ordering wave vector. The charge ordering within the copper-oxygen layer induces an out-of-plane breathing modulation of the surrounding lanthanum layers, which leads to a related distortion on the adjacent copper-oxygen layer. Our result implies that the CDW-related structural distortions do not remain confined to a single layer but rather propagate an appreciable distance through the crystal. This leads to overlapping structural modulations, in which CuO2 planes exhibit distortions arising from the orthogonal CDWs in adjacent layers as well as distortions from the CDW within the layer itself. We attribute this striking effect to the weak c-axis charge screening in cuprates and suggest this effect could help couple the CDW between adjacent planes in the crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sputter-Deposited Oxides for Interface Passivation of CdTe Photovoltaics

Commercial CdTe PV modules have polycrystalline thin films deposited on glass, and devices made in this format have exceeded 22% efficiency. Devices made by the authors with a magnesium zinc oxide window layer and tellurium back contact have achieved efficiency over 18%, but these cells still suffer from an open-circuit voltage far below ideal values. Oxide passivation layers made by sputter deposition have the potential to increase voltage by reducing interface recombination. CdTe devices with these passivation layers were studied with photoluminescence (PL) emission spectroscopy and time-resolved photoluminescence (TRPL) to detect an increase in minority carrier lifetime. Because these oxide materials exhibit barriers to carrier collection, micropatterning was used to expose small point contacts while still allowing interface passivation. TRPL decay lifetimes have been greatly enhanced for thin polycrystalline absorber films with interface passivation. Device performance was measured and current collection was mapped spatially by light-beam-induced current.

14 SOLAR ENERGY↗

Δ133p53 coordinates ECM-driven morphogenesis and gene expression in 3-dimensional mammary epithelial acini

Growing evidence indicates that p53 has a crucial role in normal tissue development. The role of the canonical p53 (p53α) and its 12± isoforms in development and homeostasis of healthy tissue remains poorly understood. Here we demonstrate that Δ133p53, three short isoforms of p53 isoform, responds specifically to laminin-111 and plays an important regulatory role in formation of mammary organoids in concert with p53α. We demonstrate that down-modulation of Δ133p53 isoforms leads to changes in gene expression of extracellular matrix molecules: fibronectin (FN), EDA+-FN, laminin α5, and laminin α3 in human breast epithelial cells. These changes resulted in increased actin stress fibers and enhanced migratory behavior of cells in 2-dimensional culture. We found that α5β1-integrin coupled with the extracellularly deposited EDA+-FN activates Akt signaling pathway in 3-dimensional (3D) culture when Δ133p53 is dysregulated. Cells that do not express detectable Δ133p53 isoforms or express low levels of these isoforms failed to form polarized structures in 3D. These results uncover that Δ133p53 isoforms coordinate expression and deposition of organ-specific ECM molecules that are critical for maintenance of tissue architecture and function.

Lee, Sun-Young (ORCID:000000034970241X)↗

Casting of Reinforced Concrete Beam: Project Progress

Aging concrete structures in nuclear power plants undergo mechanical, physical, chemical, and radioactive degradation. One of the chemical degradation mechanisms that is investigated in the research project under the Plant Modernization Pathway of the Light Water Reactor Sustainability Program is the alkali-silica reaction (ASR). The ASR is a chemical process that over time, causes expansion of calcium silicate hydrate gel. To date, the research project has studied the ASR gel formation and expansion in non-reinforced concrete specimens using vibro-acoustic modulation (VAM) technique. However, nuclear plant concrete structures are reinforced, and it might influence the application of VAM technique on reinforced concrete specimens compared to non-reinforced specimens. A research activity is initiated between Idaho National Laboratory, Vanderbilt University, and University of Nebraska - Lincoln to study the impact of reinforcement in concrete structures on the application of the VAM technique. To support this activity, University of Nebraska - Lincoln is casting and curing four reinforced concrete samples that at the end of the curing period will be transferred to Vanderbilt University to perform experimental VAM study. Vanderbilt University and Idaho National Laboratory will perform the data analysis and enhance the developed structural health monitoring framework. In this report, a progress on casting and curing of reinforced concrete samples at University of Nebraska – Lincoln is provided.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SPRUCE Anaerobic oxidation of methane mitigates net methane production and responds to long-term experimental warming in a northern bog: Supporting data

This data set contains measurements of anaerobic oxidation of methane (AOM), net methane (CH4) production, carbon dioxide (CO2) production, and gross CH4 production measurements from the SPRUCE experiment (Hanson et al. 2017). CH4 is greenhouse gas with 45 times the sustained global warming potential of CO2 over 100 years, which may have significant implications on global climate change. The process of AOM plays a large role in the extent of CH4 emissions from wetland environments like those at the SPRUCE experiment site. This study conducted two on different dates. In experiment 1, net CH4 and CO2 production were measured with a gas chromatograph through the peat profile at in situ temperatures of the SPRUCE plots four times from May to October, 2016 (2016-05 to 2016-10). Two treatments were examined, a Porewater Treatment that was a 1:1 volumetric peat:porewater slurry and a No Porewater Treatment that was field-moist peat with no porewater added. Additionally, net CH4 production were measured at frequent intervals (from 4 hr to 9 d) in peat from selected SPRUCE plots from soil collected on October 16, 2016 (2016-10-16). Samples were collected from the SPRUCE plots, immediately made anaerobic, and transported to the University of Oregon for rate measurements within several days of collection. In experiment 2, AOM, net CH4 production, CO2 production, and gross CH4 production were measured through the peat profile at in situ field temperatures once from samples collected in July, 2021 (2021-07). The same two porewater treatments were examined. AOM was measured with a 13CH4 tracer method using a Picarro G2201-i analyzer for isotopic CO2/CH4 quantification with a small stable isotope module attached. This data set contains three data files in comma separate (*.csv) format. This data set is associated with the following publication: Barney, M, AM Hopple, LL Gregory, JK Keller, and SD Bridgham. 2024. Anaerobic oxidation of methane mitigates net methane production and responds to long-term experimental warming in a northern bog. Soil Biology and Biochemistry, 190, 109316. https://doi.org/10.1016/j.soilbio.2024.109316.

SPRUCE Experiment, Marcell Experimental Forest, Me↗

Physicochemical characterization and source apportionment of Arctic ice-nucleating particles observed in Ny-Ålesund in autumn 2019

Abstract. Ice-nucleating particles (INPs) initiate primary ice formation in Arctic mixed-phase clouds (MPCs), altering cloud radiative properties and modulating precipitation. For atmospheric INPs, the complexity of their spatiotemporal variations, heterogeneous sources, and evolution via intricate atmospheric interactions challenge the understanding of their impact on microphysical processes in Arctic MPCs and induce an uncertain representation in climate models. In this work, we performed a comprehensive analysis of atmospheric aerosols at the Arctic coastal site in Ny-Ålesund (Svalbard, Norway) from October to November 2019, including their ice nucleation ability, physicochemical properties, and potential sources. Overall, INP concentrations (NINP) during the observation season were approximately up to 3 orders of magnitude lower compared to the global average, with several samples showing degradation of NINP after heat treatment, implying the presence of proteinaceous INPs. Particle fluorescence was substantially associated with INP concentrations at warmer ice nucleation temperatures, indicating that in the far-reaching Arctic, aerosols of biogenic origin throughout the snow- and ice-free season may serve as important INP sources. In addition, case studies revealed the links between elevated NINP and heat lability, fluorescence, high wind speeds originating from the ocean, augmented concentration of coarse-mode particles, and abundant organics. Backward trajectory analysis demonstrated a potential connection between high-latitude dust sources and high INP concentrations, while prolonged air mass history over the ice pack was identified for most scant INP cases. The combination of the above analyses demonstrates that the abundance, physicochemical properties, and potential sources of INPs in the Arctic are highly variable despite its remote location.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon isotopes in the ocean model of the Community Earth System Model (CESM1)

Carbon isotopes in the ocean are frequently used as paleoclimate proxies and as present-day geochemical ocean tracers. In order to allow a more direct comparison of climate model results with this large and currently underutilized data set, we added a carbon isotope module to the ocean model of the Community Earth System Model (CESM), containing the cycling of the stable isotope 13 C and the radioactive isotope 14 C. We implemented the 14 C tracer in two ways: in the "abiotic" case, the 14 C tracer is only subject to air–sea gas exchange, physical transport, and radioactive decay, while in the "biotic" version, the 14 C additionally follows the 13 C tracer through all biogeochemical and ecological processes. Thus, the abiotic 14 C tracer can be run without the ecosystem module, requiring significantly fewer computational resources. The carbon isotope module calculates the carbon isotopic fractionation during gas exchange, photosynthesis, and calcium carbonate formation, while any subsequent biological process such as remineralization as well as any external inputs are assumed to occur without fractionation. Given the uncertainty associated with the biological fractionation during photosynthesis, we implemented and tested three parameterizations of different complexity. Compared to present-day observations, the model is able to simulate the oceanic 14 C bomb uptake and the 13 C Suess effect reasonably well compared to observations and other model studies. Lastly, at the same time, the carbon isotopes reveal biases in the physical model, for example, too sluggish ventilation of the deep Pacific Ocean.

54 ENVIRONMENTAL SCIENCES↗

Force/torque display for space teleoperation control experiments and evaluation

Experiments were performed at the Johnson Space Center (JSC), Manipulator Development Facility using the full scale Shuttle Remote Manipulator System (SRMS) to evaluate the effect of visual presentation through perspective display of the orthogonal forces and torques sensed at the manipulator end effector. The experiments investigated the effect of the display information on the management of forces and torques generated during payload berthing and deployment, as well as simulated satellite module change-out operations. The evaluation also addressed (1) issues of display format, including: force/torque scaling, point of resolution, and display mixing with video generated imagery, and (20) task related variables of payload size, alternative sources of guidance information, and control mode. The results are presented of a first-pass informal anlaysis of the analog, strip chart-recorded data from these evaluation tests. The results provide a relative measure of improvement in force management through the use of such a display, as well as information regarding the impact of display variables and task demands on operator performance.

Corker, K.↗

Non-ideality near the monotectic composition of a miscibility-gap type system - Succinonitrile-water

Differential scanning calorimetry (DSC) of near monotectic succinonitrile-water solutions, fast-quenched in hydrophilic and hydrophobic DSC pans, indicate, by degree of undercooling, thst there may be significant dependence of final ingot microstructure on the pre-quench equilibration temperature. Partial molal-volume determinations from density data, along with DSC data, suggest the nature of temperature dependent component associations from 20 to 55 C in homogeneous solutions. The undercooling profile in a hydrophilic container is explained in terms of solution-composition shifts arising from the Gibbs surface excess. The evidence shows that temperature-dependent preferred component aggregates may modulate surface-composition gradients. Similar effects may be present through intermetallic compound formation in metallic monotectic alloys.

Frazier, D. O.↗

Plume induced environments on future lunar mission vehicles

The objective of this presentation is to identify potential plume heating/impingement problem areas on vehicles used for future lunar missions. This is accomplished by comparison with lunar module plume investigations performed during 1968-1971. All material is presented in viewgraph format.

Rochelle, Bill↗

The evolution of large-amplitude MHD waves near quasi-parallel shocks in the solar wind

We discuss attempts to explain the steepening of magnetohydrodynamic waves upstream of the Earth's bow shock and the formation of short-wavelength 'shocklets' in terms of simple analytic models. The effort involves use of the Derivative Nonlinear Schroedinger Equation (DNLS) to describe the wave evolution. We review shortcomings of previous attempts to model foreshock wave phenomena in terms of wave packet evolution according to the DNLS. It is pointed out that: (1) the oblique propagation of the waves and (2) their growth by unstable particle distribution are conducive to the processes of wave steepening and shocklet formation. Numerical solutions of the DNLS with initial conditions corresponding to envelope-modulated, obliquely propagating wave packets yield evolved wave packets with many properties similar to the observed waves.

Spangler, S. R.↗