Search NASA⌕ Search

SEARCH · Search NASA

Results for “POINT DEFECTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Z{sub 2} index theorem for Majorana zero modes in a class D topological superconductor

We propose a Z{sub 2} index theorem for a generic topological superconductor in class D with a point defect. Introducing a particle-hole symmetry breaking term depending on a parameter and regarding it as a coordinate of an extra dimension, we define the index of the zero modes and corresponding topological invariant for such an extended Hamiltonian. It is shown that these are related with the number of the zero modes of the original Hamiltonian modulo 2.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of surface oxide layer on nanocavity formation and silver gettering in hydrogen ion implanted silicon

We have made an investigation of the surface oxide effects on nanocavity formation in hydrogen implanted silicon and the influence of resultant nanocavities on diffusion and gettering of implanted silver atoms. A wafer with a 200-nm SiO{sub 2} surface layer was implanted with 22.5 keV H ions to a dose of 1 Multiplication-Sign 10{sup 17} cm{sup -2}, yielding the concentration peak of implanted H ions at {approx}140 nm below the SiO{sub 2}/Si interface. Subsequently, two sets of Si samples were prepared, depending on whether the oxide layer was etched off before (Group-A) or after (Group-B) post-H-implantation annealing. As evidenced by transmission electron microscopy, Group-A samples exhibited an array of large-sized nanocavities in hexagon-like shape, extending from the surface to the depth {approx}140 nm, whereas a narrow band of sphere-shaped nanocavities of small size was present around 140 nm below the surface in Group-B samples. These Si samples with pre-existing nanocavities were further implanted with Ag ions in the surface region ({approx}40 nm projected range) and post-Ag-implantation annealing was conducted in the temperature range between 600 and 900 Degree-Sign C. Measurements based on Rutherford backscattering spectroscopy revealed much different behaviors for Ag redistribution and defect accumulation in these two sets of samples. Compared to the case for Group-B Si, Group-A Si exhibited a lower concentration of residual defects and a slower kinetics in Ag diffusion as well. We discuss the role of thick surface oxide in point defect generation and recombination, and the consequence on nanocavity formation and defect retention in Si. The properties of nanocavities, e.g., their depth distribution, size, and even shape, are believed to be responsible for the observed disparities between these samples, including an interesting contrast of surface vs. bulk diffusion phenomena for implanted Ag atoms.

36 MATERIALS SCIENCE↗

Low-Temperature epitaxial growth of InGaAs films on InP(100) and InP(411)A substrates

The structural and electrical characteristics of In{sub 0.53}Ga{sub 0.47}As epitaxial films, grown in the low-temperature mode on InP substrates with (100) and (411)A crystallographic orientations at flow ratios of As4 molecules and In and Ga atoms of γ = 29 and 90, have been comprehensively studied. The use of InP(411)A substrates is shown to increase the probability of forming two-dimensional defects (twins, stacking faults, dislocations, and grain boundaries), thus reducing the mobility of free electrons, and As{sub Ga} point defects, which act as donors and increase the free-electron concentration. An increase in γ from 29 to 90 leads to transformation of single-crystal InGaAs films grown on (100) and (411)A substrates into polycrystalline ones.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrical degradation of double-Schottky barrier in ZnO varistors

Researches on electrical degradation of double-Schottky barrier in ZnO varistors are reviewed, aimed at the constitution of a full picture of universal degradation mechanism within the perspective of defect. Recent advances in study of ZnO materials by atomic-scale first-principles calculations are partly included and discussed, which brings to our attention distinct cognition on the native point defects and their profound impact on degradation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and optical properties of dense vertically aligned ZnO nanorods grown onto silver and gold thin films by galvanic effect with iron contamination

Highlights: • ZnO nanorods were grown on Au and Ag films in aqueous solution by galvanic effect. • The method is prone to metal contamination which can influence the ZnO properties. • Iron doping improves the lattice matching between ZnO and the substrate. • Energy levels of point defects are lowered and the light emission is red-shifted. • Galvanic-induced nucleation starts and proceeds continuously during the growth. - Abstract: Dense arrays of vertically aligned ZnO nanorods have been grown onto either silver or gold seedless substrates trough a simple hydrothermal method by exploiting the galvanic effect between the substrate and metallic parts. The nanorods exhibit larger bases and more defined hexagonal shapes, in comparison with standard non-galvanic wet-chemistry synthesis. X-ray diffraction (XRD) shows that the iron contamination, associated with the galvanic contact, significantly improves the in-plane compatibility of ZnO with the Au and Ag cubic lattice. Photoluminescence (PL) measurements indicate that the contamination does not affect the number density of localized defects, but lowers their energy levels uniformly; differently, the band-edge emission is not altered appreciably. Finally, we have found that the ZnO hetero-nucleation by galvanic effect initiates at different times in different sites of the substrate area. Our results can be useful for the fabrication of high performance piezonanodevices comprising high-density metal-to-ZnO nanoscaled junctions without intermediate polycrystalline layers.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electronic characterization of defects in narrow gap semiconductors

The study of point defects in semiconductors has a long and honorable history. In particular, the detailed understanding of shallow defects in common semiconductors traces back to the classic work of Kohn and Luttinger. However, the study of defects in narrow gap semiconductors represents a much less clear story. Here, both shallow defects (caused by long range potentials) and deep defects (from short range potentials) are far from being completely understood. In this study, all results are calculational and our focus is on the chemical trend of deep levels in narrow gap semiconductors. We study substitutional (including antisite), interstitial and ideal vacancy defects. For substitutional and interstitial impurities, the efects of relaxation are included. For materials like Hg(1-x)Cd(x)Te, we study how the deep levels vary with x, of particular interest is what substitutional and interstitial atoms yield energy levels in the gap i.e. actually produce deep ionized levels. Also, since the main technique utilized is Green's functions, we include some summary of that method.

Patterson, James D.↗

Suppression of tin precipitation in SiSn alloy layers by implanted carbon

By combining transmission electron microscopy and Rutherford backscattering spectrometry, we have identified carbon related suppression of dislocations and tin precipitation in supersaturated molecular-beam epitaxial grown SiSn alloy layers. Secondary ion mass spectrometry has exposed the accumulation of carbon in the SiSn layers after high temperature carbon implantation and high temperature thermal treatment. Strain-enhanced separation of point defects and formation of dopant-defect complexes are suggested to be responsible for the effects. The possibility for carbon assisted segregation-free high temperature growth of heteroepitaxial SiSn/Si and GeSn/Si structures is argued.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase-field Simulations of Te-Precipitate Morphology and Evolution Kinetics in Te-Rich CdTe Crystals

Te precipitates are one of main defects that form during the cooling process of as–grown CdTe crystals. Many factors such as the kinetic properties of intrinsic point defects (vacancy, interstitial, and antisites), internal stresses around the precipitates associated with the lattice mismatch between the precipitate and matrix, thermal stresses due to temperature gradients, extended defects (dislocations, twin and grain boundaries), non-stoichiometric composition, and the thermal treatment processing might all affect the formation and growth/dissolution of Te precipitates. A good understanding of these effects on Te precipitate evolution kinetics is technically important in order to optimize the material process and obtain high quality crystals. This work aims to develop a phase-field model for investigating the evolution of a Te-precipitate in a Te-rich CdTe crystal under cooling. Cd vacancies and Te interstitials are assumed to be the diffusion species in the system. We also assume that the system is in two phase equilibrium (matrix CdTe and liquid Cd-Te droplet) at high temperatures and three phase equilibrium (matrix CdTe, Te-precipitate, and void) at low temperatures. With the thermodynamic and kinetic properties from experimental phase diagrams and thermodynamic calculations, the effect of Te and vacancy mobility, cooling rates and internal stresses on Te-precipitate and void evolution kinetics are investigated.

36 MATERIALS SCIENCE↗

Extended Defects in Cdznte Radiation Detectors

Large-volume CdZnTe (CZT) single crystals with electron lifetime exceeding 10 mus have recently become commercially available. This opened the opportunity for making room temperature CZT gamma-ray detectors with extended thicknesses and larger effective areas. However, the extended defects that are present even in the highest-quality material remain a major drawback which affects the availability and cost of large CZT detectors. In contrast to the point defects that control electron lifetime and whose effects on the charge collection can be electronically corrected, the extended defects introduce significant fluctuations in the collected charge, which increase with a crystal's thickness. The extended defects limit the uniformity in the electrons' drift distance in CZT crystals, above which electron trapping cannot effectively be corrected. In this paper, we illustrate the roles of the extended defects in CZT detectors with different geometries. We emphasize that the crystallinity of commercial CZT materials remains a major obstacle on the path to developing thick, large-volume CZT detectors for gamma-ray imaging and spectroscopy.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Tuning thermal conductivity in homoepitaxial SrTiO{sub 3} films via defects

We demonstrate the ability to tune the thermal conductivity of homoepitaxial SrTiO{sub 3} films deposited by reactive molecular-beam epitaxy by varying growth temperature, oxidation environment, and cation stoichiometry. Both point defects and planar defects decrease the longitudinal thermal conductivity (k{sub 33}), with the greatest decrease in films of the same composition observed for films containing planar defects oriented perpendicular to the direction of heat flow. The longitudinal thermal conductivity can be modified by as much as 80%—from 11.5 W m{sup −1}K{sup −1} for stoichiometric homoepitaxial SrTiO{sub 3} to 2 W m{sup −1}K{sup −1} for strontium-rich homoepitaxial Sr{sub 1+δ}TiO{sub x} films—by incorporating (SrO){sub 2} Ruddlesden-Popper planar defects.

36 MATERIALS SCIENCE↗

Prediction of Thermal Conductivity for Irradiated SiC/SiC Composites by Informing Continuum Models with Molecular Dynamics Data

This article proposes a new method to estimate the thermal conductivity of SiC/SiC composites subjected to neutron irradiation. The modeling method bridges different scales from the atomic scale to the scale of a 2D SiC/SiC composite. First, it studies the irradiation-induced point defects in perfect crystalline SiC using molecular dynamics (MD) simulations to compute the defect thermal resistance as a function of vacancy concentration and irradiation dose. The concept of defect thermal resistance is explored explicitly in the MD data using vacancy concentrations and thermal conductivity decrements due to phonon scattering. Point defect-induced swelling for chemical vapor deposited (CVD) SiC as a function of irradiation dose is approximated by scaling the corresponding MD results for perfect crystal β-SiC to experimental data for CVD-SiC at various temperatures. The computed thermal defect resistance, thermal conductivity as a function of grain size, and definition of defect thermal resistance are used to compute the thermal conductivities of CVD-SiC, isothermal chemical vapor infiltrated (ICVI) SiC and nearly-stoichiometric SiC fibers. The computed fiber and ICVI-SiC matrix thermal conductivities are then used as input for an Eshelby-Mori-Tanaka approach to compute the thermal conductivities of 2D SiC/SiC composites subjected to neutron irradiation within the same irradiation doses. Predicted thermal conductivities for an irradiated Tyranno-SA/ICVI-SiC composite are found to be comparable to available experimental data for a similar composite ICVI-processed with these fibers.

SiC/SiC composites, thermal conductivity, fiber/ma↗

Minimizing hydrogen vacancies to enable highly efficient hybrid perovskites

Defect-induced non-radiative losses are currently limiting the performance of hybrid perovskite devices. Experimental reports have indicated the existence of point defects that act as detrimental non-radiative recombination centres under iodine-poor synthesis conditions. However, the microscopic nature of these defects is still unknown. Here we demonstrate that hydrogen vacancies can be present in high densities under iodine-poor conditions in the prototypical hybrid perovskite MAPbI 3 (MA = CH 3 NH 3 ). They act as very efficient non-radiative recombination centres with an exceptionally high carrier capture coefficient of 10 –4 cm 3 s –1 . By contrast, the hydrogen vacancies in FAPbI 3 [FA = CH(NH 2 ) 2 ] are much more difficult to form and have a capture coefficient that is three orders of magnitude lower. Our study unveils the critical but overlooked role of hydrogenvacancies in hybrid perovskites and rationalizes why FA is essential for realizing high efficiency in hybrid perovskite solar cells. Furthermore, minimizing the incorporation of hydrogen vacancies is key to enabling the best performance of hybrid perovskites.

14 SOLAR ENERGY↗

Inhomogeneous width of oxygen-deficient centers induced by electron irradiation of silica

We report a study of the luminescence activity of oxygen-deficient centers stabilized in as-grown synthetic silica, as compared with the same defects induced by {beta} irradiation at increasing doses, ranging from 1.2x10{sup 3} to 5x10{sup 6} kGy. We experimentally observe a progressive broadening of the luminescence band with increasing total electron dose released on samples. By analyzing our data within a theoretical model capable of separating homogeneous and inhomogeneous contribution to the total luminescence linewidth, we observe that the increasing of the width is entirely ascribable to the inhomogeneous component which increases, in the most irradiated sample, of 60% with respect to the value in the as-grown sample. This effect can be due either to the progressive creation of new defects statistically exploring different sites of the matrix, or to a progressive structural transformation of silica host which affects the optical properties of induced point defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First principles calculations for defects in U

Uranium (U) exhibits a high temperature body-centered cubic (bcc) allotrope that is often stabilized by alloying with transition metals such as Zr, Mo, and Nb for technological applications. One such application involves U–Zr as nuclear fuel, where radiation damage and diffusion (processes heavily dependent on point defects) are of vital importance. Several systems of U are examined within a density functional theory framework utilizing projector augmented wave pseudopotentials. Two separate generalized gradient approximations of the exchange-correlation are used to calculate defect properties and are compared. The bulk modulus, the lattice constant, and the Birch–Murnaghan equation of state for the defect free bcc uranium allotrope are calculated. Defect parameters calculated include energies of formation of vacancies in the a and ? allotropes, as well as self-interstitials, Zr interstitials, and Zr substitutional defects for the ? allotrope. The results for vacancies agree very well with experimental and previous computational studies. The most probable self-interstitial site in ?-U is the 110 dumbbell, and the most probable defect location for dilute Zr in ?-U is the substitutional site. This is the first detailed study of self-defects in the bcc allotrope of U and also the first comprehensive study of dilute Zr defects in ?-U.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Radiation damage evolution in ceramics

A review is presented of recent results on radiation damage production, defect accumulation and dynamic annealing in a number of ceramics, such as silicon carbide, zircon and zirconia. Under energetic particle irradiation, ceramics can undergo amorphization by the accumulation of point defects and defect clusters (silicon carbide) or direct impact amorphization (zircon). Ceramics that resist radiation-induced amorphization have mechanisms to dissipate the primary knock-on atom energy, such as replacement collision sequences that leave the lattice undisturbed and low-energy cation site exchange. The presence of engineered mobile defects, such as structural vacancies in stabilized zirconia, can dynamically anneal radiation damage. Thus, defect engineering is a promising strategy to design radiation tolerance for applications such as nuclear waste disposal.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Rondorfite-type structure — XPS and UV–vis study

Highlights: • Structural and spectroscopic characterization of chlorosilicate mineral, rondorfite. • Characterization of main photoemission lines and valence band spectra. • The study of color origin’s using UV–vis spectroscopy. • Analysis of structural changes in context of origin of natural fluorescence. • Discussion of a new application possibilities of analyzed mineral - Abstract: This paper focuses on X-ray diffraction, X-ray photoelectron and UV–vis spectroscopy of two different (green, orange) rondorfite samples. The differences in the sample color originate from various O/Cl ratios. The orange color was found to be related either to the isomorphic substitution of Fe{sup 3+}/Al{sup 3+} for Mg{sup 2+}, the presence of atypical [MgO{sub 4}] tetrahedrons in crystal structure or electronegativity of the sample. The tetrahedron is known to be very prone to accumulation of impurities and substitute atoms. Moreover, the XPS data showed tetrahedrally coordinated Mg{sup 2+} and isomorphic substitution of Al{sup 3+}/Fe{sup 3+} for Mg{sup 2+}, which influences local disordering and the point defects density and distribution. Non-equilibrium chlorine positions inside the crystal cages as well as Ca-Cl bonds have also been found. The XPS measurements as a function of temperature indicate occurrence of a structural transformation at about 770 K which is accompanied by a rotation of silicate tetrahedra within magnesiosilicate pentamer and luminescence disappearance.

36 MATERIALS SCIENCE↗

Damage Evolution in GaN Under MeV Heavy Ion Implantation

Damage evaluation processes in patterned GaN implanted by 3 MeV Au2+ ions were investigated as function of ion fluences and annealing temperatures. Surface swelling was observed by using AFM and the results showed that the swelling height depends on ion fluence and annealing temperature. A four-stage of implantatation-induced damage evolution, including point defects, defect clustering, disordering or amorphization and even decomposition, was found and was contributed to defect formation, accumulation and N bubble formation induced at different level of dpa. Crater-like holes were observed on the surface of GaN implanted at the ion fluence of 2×1016 cm-2, and it is considered as an evidence of N loss and broken bubbles formed during implantation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Formation and properties of defects and small vacancy clusters in SiC: Ab initio calculations

Large-scale ab initio simulation methods have been employed to investigate the configurations and properties of defects in SiC. Atomic structures, formation energies and binding energies of small vacancy clusters have also been studied as a function of cluster size, and their relative stabilities are determined. The calculated formation energies of point defects are in good agreement with previously theoretical calculations. The results show that the most stable configuration of a di-vacancy cluster consists of two C vacancies located at second nearest neighbor sites, while a di-vacancy with two Si vacancies is not stable and may dissociate at room temperature. In general, the formation energies of small vacancy clusters increase with size, but the formation energies for clusters with a Si vacancy and n C vacancies (VSi-nVC) are much smaller than those with a C vacancy and n Si vacancies (VC-nVSi). These results demonstrate that the VSi-nVC clusters are more stable than the VC-nVSi clusters in SiC, and provide possible nucleation sites for larger vacancy clusters or voids to grow. For these small vacancy clusters, the binding energy decreases with increasing cluster size, and ranges from 2.5 to 4.6 eV. These results indicate that the small vacancy clusters in SiC are stable at temperatures up to 1900 K, which is consistent with experimental observations.

36 MATERIALS SCIENCE↗