Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROXIMITY EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

A Multiwavelength Study of Nearby Millisecond Pulsar PSR J1400−1431: Improved Astrometry and an Optical Detection of Its Cool White Dwarf Companion

In 2012, five high-school students involved in the Pulsar Search Collaboratory discovered the millisecond pulsar (MSP) PSR J1400−1431, and initial timing parameters were published in Rosen et al. a year later. Since then, we have obtained a phase-connected timing solution spanning five years, resolving a significant position discrepancy and measuring P-dot , proper motion, parallax, and a monotonic slope in dispersion measure over time. Due to PSR J1400−1431’s proximity and significant proper motion, we use the Shklovskii effect and other priors to determine a 95% confidence interval for PSR J1400−1431’s distance, d=270{sub −80}{sup +130} pc. With an improved timing position, we present the first detection of the pulsar’s low-mass white dwarf (WD) companion using the Goodman Spectrograph on the 4.1 m SOAR telescope. Deeper imaging suggests that it is a cool DA-type WD with T{sub eff}=3000±100 K and R/R{sub ⊙}=(2.19±0.03)×10{sup −2} (d/270 pc). We show a convincing association between PSR J1400−1431 and a γ-ray point source, 3FGL J1400.5−1437, but only weak (3.3σ) evidence of pulsations after folding γ-ray photons using our radio timing model. We detect an X-ray counterpart with XMM-Newton, but the measured X-ray luminosity (1×10{sup 29} erg s{sup −1}) makes PSR J1400−1431 the least X-ray luminous rotation-powered MSP detected to date. Together, our findings present a consistent picture of a nearby (d≈230 pc) MSP in a 9.5-day orbit around a cool ∼0.3 M {sub ⊙} WD companion, with orbital inclination i≳60{sup ∘}.

79 ASTRONOMY AND ASTROPHYSICS↗

Calculation of irrotational wind pattern with application to Cleveland topography

Small perturbation theory is applied to compute the deflection of the wind blowing across land that has an irregular topography. As an illustration, the method is applied first to the flow around a single hill of Gaussian profile. Then calculations are made for the irregular topography on the east side of Cleveland where the elevation changes by several hundred feet. It was found that the topography produced small wind deflections that would not be of practical importance in air pollution dispersion studies. The calculations were for a neutrally stable atmosphere. Although they are not investigated here, other factors such as thermal stratification of the atmosphere, diurnal variations, and convection currents resulting from the proximity of Lake Erie and the city heat island effect are expected to be more significant than the influence of topography.

Siegel, R.↗

Effect of hand-based sensors on manipulator control performance

The effect of hand based sensors (e.g tactile, force, and proximity sensors) on the performance of manipulator control is discussed. A brief overview is presented on various experimental hand based information systems which provide the manipulator controller some nonvisual awareness of the task environment. It is established that differences in manipulator task categories and motion phases require different hand based information systems to cope with control performance requirements.

Bejczy, A. K.↗

Automatic arc welding of propulsion system tubing in close proximity to sensitive electronic devices

The planned final assembly of the Galileo spacecraft propulsion system tubing, which involves welding in close proximity to sensitive electronics, raised significant concerns about the effects of electromagnetic coupling of weld energy on CMOS and other sensitive integrated circuits. A test program was established to assess the potential of an orbital arc welder and an RF-induction brazing machine to damage sensitive electronic equipment. Test parameters were varied to assess the effectiveness of typical transient suppression practices such as grounding, bonding, and shielding. A technique was developed to calibrate the hazard levels at the victim-circuit location; this technique is described along with the results and conclusions of the test program.

Lumsden, J. M.↗

Aerodynamic characteristics of a large-scale, twin tilt-nacelle V/STOL model

A subsonic tilt-nacelle V/STOL aircraft configuration is described which is powered by two turbofan engines, mounted on a single carry-through structure that is designed to maintain the thrust axis close to the center of gravity at nacelle incidences of 5-95 deg. Control during V/STOL operation, often from small ship platforms, is achieved by means of a vane assembly that is immersed in each turbofan's exhaust. Wind tunnel test data have been obtained with an 11.2-m wing span model for the vertical-to-horizontal flight transition capability of the concept. It is found that the aircraft can operate over a broad transition corridor, with sufficient maneuver capability about the trim points. The control vane exhibited linear response characteristics over a large deflection range, with little influence from power, angle of attack or ground proximity in hover. The model induced a positive ground effect in hover that increased as wheel height was approached and strake angle increased.

Falarski, M. D.↗

Demonstrating system for servicing satellites

NASA has initiated a program to demonstrate a Satellite Servicer System prototype in a series of flight tests with the Space Shuttle. When the commitment to an operational system has been demonstrated, it is anticipated that a variety of missions will develop that can productively use the servicing capability. Rendezvous and proximity operations contain key enabling technologies needed for an effective operational system. Guidance, navigation and control hardware and operational techniques must be integrated into the program. Supporting sensor technology may limit or enhance the capability of the system depending on its readiness. Requirements for docking the spacecraft in the system concept development and technology requirements are reviewed. Examples of the initial assessment of technology readiness and applications opportunities are discussed. The degree of autonomy is of particular interest.

Jenkins, Lyle M.↗

Supersonic quasi-axisymmetric vortex breakdown

An extensive computational study of supersonic quasi-axisymmetric vortex breakdown in a configured circular duct is presented. The unsteady, compressible, full Navier-Stokes (NS) equations are used for the present computational study. The NS equations are solved for quasi-axisymmetric flow using an implicit, upwind, flux-difference splitting, finite-volume scheme. The quasi-axisymmetric solutions are time accurate and are obtained by forcing the components of the flowfield vector to be equal on two axial planes, which are in close proximity of each other. The computational study addresses the effect of the Reynolds number, for laminar flows, on the evolution and persistence of vortex breakdown. The effect of boundary conditions at the duct exit on vortex breakdown is also studied. Finally, the effect of swirl ratio at the duct inlet is investigated.

Kandil, Osama A.↗

The L1551NE molecular outflow

L1551NE is a very young protostar (class I or perhaps class 0), located very close to L1551NE IRS 5. It is the second brightest far-infrared source in the Taurus molecular cloud complex, but its proximity to the brightest source IRS 5 has prevented effective observations of any molecular outflow. We here present evidence that it does indeed process an outflow, that the optical/infrared reflection nebula is associated with the blueshifted outflow lobe, and that the L1551W outflow does not originate from L1551NE, as has been suggested.

Moriarty-Schieven, G. H.↗

EDSN: A First Demonstration of a Distributed System of Nanosatellites

Edison Demonstration of SmallSat Networks (EDSN) is the first demonstration of a distributed system of nano-scale satellites to use intersatellite communication while working towards common science and technology goals. This unique mission configuration poses key technological challenges, including multi-satellite deployment, close proximity flight, cross-satellite communications, and simplified and effective operations. Tackling these challenges has required extensive development on EDSNs guidance navigation and control (GNC) and flight software systems. Although use of COTS component is common to the CubeSat community, it is prudent to point out that utilization of these components enables EDSN to accomplish its objectives at relatively low cost ($12M) in comparison to current multi-satellite missions capable of cross-link communications. EDSN is on cost and schedule with flight unit shipment in August 2013. This paper aims to update the community of EDSN's progress since SRR and speaks to the approach EDSN has taken to resolve some of the main issues revolving around a distributed system of nano-scale satellites.

Nanosatellite↗

Python Based Plume Dynamics Estimation Tool (PyPDET) Rapid Plume Strike Analysis for RPOD Maneuvers in Deep Space Operations

I worked as a NASA Intern during the Summer 2023 term in the DS-00 division under the supervision of my mentor, Dr. Jonathan Pitt. Our goal was to build on our previous work from 2022 to develop a plume strike estimation tool using a prescribed physics methodology and model plume impingement effects while considering the dynamics of a rendezvous, operations, proximity, and docking (RPOD) maneuver. This tool supports previously configured CFD-DSMC calculations by allowing for rapid analysis of initial designs using a low-fidelity source flow model. Engineers can then use the high-fidelity CFD-DSMC tool to consolidate results as they work towards finalizing a design. This year’s project was focused on developing a software application that other engineers would be using in their analysis. Thus, the user’s experience was considered in the development of this application. Proper documentation, testability, and modularity of the codebase was our priority. For example, the project included auto documentation procedures to start building towards a User Manual, while also including dedicated demonstration cases for more explicit communication of functionality. Also, this project included a framework for testing the source code for future developments. Additionally, care was taken to develop the code using an Object-Oriented Programming approach. Thus, allowing for a modular extensibility of functionality in anticipation of future developments. The core work of this project was developing an algorithm that would transform the visiting vehicle and associated thruster data according to the kinematics described in the jet firing history. It would then calculate the estimated plume strikes on two of the target vehicles and write data accordingly into a VTK file. Summer work is to conclude by developing and presenting a PowerPoint slide deck at the intern exit briefing on August 11 th , 2023. Once the model for simple plume strike calculations is developed and tested there are several avenues to explore to continue development of this tool. These are also discussed in this report.

Plume Impingement↗

Multifunctional thin film surface

A thin film with multiple binding functionality can be prepared on an electrode surface via consecutive electroreduction of two or more aryl-onium salts with different functional groups. This versatile and simple method for forming multifunctional surfaces provides an effective means for immobilization of diverse molecules at close proximities. The multifunctional thin film has applications in bioelectronics, molecular electronics, clinical diagnostics, and chemical and biological sensing.

47 OTHER INSTRUMENTATION↗

A theoretical investigation of ground effects on USB configurations

A formulation predicts the variation of circulation forces and jet reaction forces in ground proximity as a function of ground height. The predicted results agree well with available experimental data. It is shown that the wing-alone theory is not capable of predicting the ground effect for USB configurations.

Lan, C. E.↗

Modeling the Kondo effect of a magnetic atom adsorbed on graphene

The Kondo effect due to a magnetic atom adsorbed on graphene is investigated using two theoretical approaches, including the non-equilibrium Green's function method within the slave-boson mean-field approximation and a newly developed tight-binding (TB) model with an effectively infinite Hubbard U term. Both methods reveal the presence of a Kondo peak in the local density of state (LDOS) of graphene near the Fermi level. A sharp Kondo peak is only observed in the odd-neighboring C sites of the C atom directly below the magnetic atom placed in top position. The peak intensity is found to decay quickly with respect to the distance between the C site and the magnetic atom. A theoretical model of scanning tunneling microscopy (STM) of graphene is presented as a means to identify the manifestation of the Kondo effect via direct topographic STM measurements. STM simulations show that in the proximity of the magnetic atom, only the C atoms of one sublattice are visible at low bias potential and thus a triangular lattice can be seen, in agreement with recent experiments. Further away from the magnetic atom, the Kondo effect dies down and eventually both sublattices are visible, leading to the recovery of the hexagonal lattice. Furthermore, this work not only provides a new TB method to study the Kondo effect in graphene, but also presents both scanning tunneling spectroscopy and microscopy fingerprints of the Kondo effect to facilitate its experimental verification.

36 MATERIALS SCIENCE↗

Nonconventional NMR Spin-Coupling Constants in Oligosaccharide Conformational Modeling: Structural Dependencies Determined from Density Functional Theory Calculations

Nonconventional NMR spin-coupling constants were investigated to determine their potential as conformational constraints in MA’AT modeling of the O-glycosidic linkages of oligosaccharides. Four ( 1 J C1',H1' , 1 J C1',C2' , 2 J C1',H2' , and 2 J C2',H1' ) and eight ( 1 J C4,H4 , 1 J C3,C4 , 1 J C4,C5 , 2 J C3,H4 , 2 J C4,H3 , 2 J C5,H4 , 2 J C4,H5 , and 2 J C3,C5 ) spin-couplings in methyl β-d-galactopyranosyl-(1→4)-β-d-glucopyranoside (methyl β-lactoside) were calculated using density functional theory (DFT) to determine their dependencies on O-glycosidic linkage C–O torsion angles, $\phi$ and ψ, respectively. Long-range 4 J H1',H4 was also examined as a potential conformational constraint of either $\phi$ or ψ. Secondary effects of exocyclic (hydroxyl) C–O bond rotation within or proximal to these coupling pathways were investigated. Based on the findings of methyl β-lactoside, analogous J-couplings were studied in five additional two-bond O-glycosidic linkages [βGlcNAc-(1→4)-βMan, 2-deoxy-βGlc-(1→4)-βGlc, αMan-(1→3)-βMan, αMan-(1→2)-αMan, and βGlcNAc(1→2)-αMan] to determine whether the coupling behaviors observed in methyl β-lactoside were more broadly observed. Of the 13 nonconventional J-couplings studied, 7 exhibit properties that may be useful in future MA’AT modeling of O-glycosidic linkages, none of which involve coupling pathways that include the linkage C–O bonds. The findings also provide new insights into the general effects of exocyclic C–O bond conformation on the magnitude of experimental spin-couplings in saccharides and other hydroxyl-containing molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical Detection of Single-Domain Néel Vector Reorientation across the Spin–Flop Transition in Cr 2 O 3 Crystals

Electrical transport measurements in heterostructures of antiferromagnetic Cr 2 O 3 bulk crystals and a thin Pt layer exhibit sharp responses as the Néel vector of Cr 2 O 3 undergoes the spin−flop transition. This abrupt change can arise from several distinct mechanisms including magnetostriction, proximity-induced anomalous Hall, spin Hall anomalous Hall, and spin Hall planar Hall effects. While large Pt devices sensing multiple up/ down domains can produce indistinguishable Hall signal jumps due to different initial Néel vector orientations, smaller Pt devices that sense single domains isolate the proximity-induced Hall signals. This allows direct electrical detection of Néel vector reorientation across the spin−flop transition in single-domain regions. Furthermore, the single-domain state can be prepared by magnetic field cooling or magnetoelectric cooling. We demonstrate a method to control and characterize the three-dimensional orientation of single-domain Néel vectors by exploiting Hall measurements and cooling techniques, crucial for future antiferromagnetic spintronic applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomistic Investigations of the Effects of Si/Al Ratio and Al Distribution on the Adsorption Selectivity of n -Alkanes in Brønsted-Acid Zeolites

The adsorption of n -alkanes onto Brønsted-acid sites is a key step in the catalytic cracking of alkanes. Employing configurational-bias Monte Carlo simulations, we have investigated how the ratio of equilibrium adsorption constants for central C-C bonds relative to terminal bonds of n -alkanes (i.e., the adsorption selectivity ratio) in Brønsted-acid zeolites is influenced by the Si/Al ratio and the Al distribution. A new computational approach was implemented, and the developed force field was validated by a comprehensive comparison between simulation results and experimental data for a number of Brønsted-acid zeolites. While the adsorption selectivity seems to be relatively insensitive to the Si/Al ratio, our results reveal that the Al distribution plays a crucial role in determining the adsorption selectivity. Changes in the Al distribution result in a change of as much as 2-fold in the adsorption selectivity ratio for n -hexane. The selectivity generally shows larger variations with respect to Al distribution in zeolites with a larger Si/Al ratio. The two factors identified by this work that substantially influence the selectivity ratio are the siting of Al atoms among T-sites and their spatial proximity, and an atomic-level understanding of each of these effects was achieved. The siting of Al atoms at more or less selective T-sites significantly influences the overall selectivity ratio, and Al atoms in close proximity can synergistically enhance the adsorption of central C-C bonds, leading to a higher selectivity ratio relative to isolated Al atoms. Finally, we anticipate that these results will have important implications for future large-scale computational screenings and the development of advanced synthesis approaches to target certain Al distributions in zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analytical study of STOL Aircraft in ground effect. Part 2: Nonplanar, nonlinear method applicable to three dimensional jets of finite thickness

The ability of the potential flow analysis (POTFAN) to predict the influence of ground proximity on lift systems is examined. A two dimensional study employing vortex lattice methodology provides confidence that ground effect phenomenon can be predicted using discrete singularity representation. Two dimensional quasi-steady ascent and descent behavior determined provides guidance in interpreting three dimensional results. Steady and quasi-steady ground effect aerodynamic characteristics predicted by POTFAN are presented for several basic unpowered configurations. POTFAN results are compared with experimental data and results of other analytical methods. Modification of POTFAN to incorporate multienergy flow analysis is discussed. General aspects of thick jet models are examined to provide a basic for extending POTFAN's scope to include analysis of propulsive lift interactions.

Shollenberger, C. A.↗

Design and Development of an Automated Instrument for Measuring Radioactivity in an Excavator Bucket - 16246

Increasing interest and emphasis is being given to the presence of radioactive contamination in the environment and the methods by which this contamination can be remediated. Radioactive contamination may arise from industrial process including the operation of nuclear facilities. It may also arise from the enhancement of naturally occurring radioactive material by industrial processes. An area of particular concern is the remediation of soil and rubble with radioactive contamination. Traditional methods of soil remediation involve sampling followed by the excavation of areas where contamination is found. The soil removal process is normally very inefficient and can involve multiple handling of excessive quantities of soil and ultimately an over estimate of the quantity of soil with radioactive contamination. In order to both minimize material handling and to reduce the final volume of contaminated material, which must be handled for disposal, a sensitive instrument has been developed and tested which is designed to measure the radioactive content of an excavator bucket. The instrument detector is positioned automatically just above the open top of the bucket and the measurement employs a high efficiency sodium iodide crystal which has a graded shadow shield to reduce the effect of background radioactivity. The measurement efficiency is enhanced as the detector is located in close proximity to the soil in the bucket and the thick steel shell of the bucket acts as a shield to further reduce the effect of background from the ground below. The method has obvious advantages over methods, which attempt to measure the potentially radioactive soil through the shielding provided by the thick steel bucket shell. As the first stage of the bucket measurement the excavator operator fills the bucket and locates it in a designated position with the open top of the bucket facing upwards, close to the operator cab. A measurement technician, located outside the danger area of the excavator boom, begins the measurement using a tablet computer with a wireless connection to the instrument. The shielded detector is moved from a storage position above the operator cab to the measurement position close to the open surface of the excavator bucket. Once the measurement is completed in typically one to two minutes, the detector is repositioned in its storage location and the measurement data is transmitted to the tablet computer. At this point the measurement technician makes the decision based on the measurement results as to how to disposition the bucket contents. Typically contaminated material will be transferred to a vehicle for off-site disposal. Alternatively, and this is the great advantage of this technique, uncontaminated material may be returned directly to the site of the excavation without the need for further handling. The development, detailed design and preliminary testing of the instrument are described. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗