Search NASA⌕ Search

SEARCH · Search NASA

Results for “REACTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Control rod reactivity measurement by rod-drop method at a fast critical assembly

Rod-drop experiments were carried out to estimate the reactivity of the control rod of a fast critical assembly operated by CAEP. Two power monitor systems were used to obtain the power level and integration method was used to process the data. Three experiments were performed. The experimental results of the reactivity from the two power monitor systems were consistent and showed a reasonable range of reactivity compared to results from positive period method. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Core design of long life-cycle fast reactors operating without reactivity margin

In this paper we consider a possibility of designing a fast reactor core that operates without reactivity margin for a long time. This study is based on the physical principle of fast reactor operating in a self-adjustable neutron-nuclear regime (SANNR-1) introduced by L.P. Feoktistov (1988-1993) and improved by V. Ya. Gol'din SANNR-2 (1995). The mathematical modeling of active zones of fast reactors in SANNR modes is held by authors since 1992. The numerical simulation is based on solving the neutron transport equation coupled with quasi-diffusion equations. The calculations have been performed using standard 26 energy groups. We use a hierarchy of spatial models of 1D, 1.5D, 2D, and 3D geometries. The spatial models of higher dimensionality are used for verification of results. The calculations showed that operation of the reactor in this mode increases its efficiency, safety and simplifies management. It is possible to achieve continuous work of the reactor in SANNR-2 during 7-10 years without fuel overloads by means of further optimization of the mode. Small reactivity margin is used only for the reactor start up. After first 10-15 days the reactor in SANNR-2 operates without reactivity margin. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The 'virtual density' principle of neutronics: Toward rapid computation of reactivity effects in practical core distortion scenarios

Fast reactor core reactivities are sensitive to geometric distortions arising from three distinct phenomena: (1) irradiation swelling of fuel throughout core lifetime, (2) thermal expansion of fuel during transients, and (3) mechanical oscillations during seismic events. Performing comprehensive reactivity analysis of these distortions requires methods for rapidly computing a multitude of minute reactivity changes. Thus, we introduce the 'virtual density' principle of neutronics as a new perturbation technique to achieve this rapid computation. This new method obviates many of the most challenging aspects of conventional geometric perturbation theory. Essentially, this 'virtual density' principle converts geometric perturbations into equivalent material density perturbations (either isotropic or anisotropic), which are highly accurate and comparatively simple to evaluate. While traditional boundary perturbation theory employs surface integrals, the 'virtual density' principle employs equivalent volume integrals. We introduce and validate this method in three subsequent stages: (1) isotropic 'virtual density', (2) anisotropic 'virtual density' for whole cores, and (3) anisotropic 'virtual density' for interior zones within cores. We numerically demonstrate its accuracy for 2-D core flowering scenarios. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Reactivity measurements using the Zolotukhin-Mogilner Method

The zero count probability method (also called Zolotukhin-Mogilner Method, after its inventors) is a method for measuring the reactivity in nuclear reactors, being a competitor of the [more well-known in the West] Feynman-alpha Method and the Rossi-alpha Method. The modus operandi of this method is using the detector channels where there was no counting at all in order to calculate reactor parameters. In deep subcriticality few models have been tested and this work tries out the Zolotukhin-Mogilner Method in one of such scenarios: measurements will be made in environments below -3,5 k pcm in the zero-potency water-moderated reactor IPEN/MB-01 which is fuelled by UO{sub 2} enriched by 4.3%. These extremely low reactivity environments are required because the chance of no counts on the detector must be significant: otherwise, the method would demand a large time of acquisition of data. Besides that, the method is very simple and straightforward. One of the advantages of this method is that it needs very little data reduction, since the essential data is directly given by the measuring apparatus. The detection will be in charge of modern BF{sub 3} detectors. It will be assumed that, in these deep subcritical systems, the function K{sub eff} = f(N-Nkp) has a linear portion in its first part, resulting of the decomposition of it in a Taylor series. The value of alpha is related to the reactivity ρ with linear dependency. The results will be compared with recent studies of the two main methods described above. Presented for the first time in the 60's, this tool has seen little use in the west hemisphere. This work shows its use in the measurements of the nuclear reactor IPEN/MB-01, as well as the code developed for its employment. It will be the first time this method is used in the south hemisphere. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Performance of U{sub 3}Si{sub 2} fuel in a reactivity insertion accident

In this study we examined the performance of the U{sub 3}Si{sub 2} fuel cladded with Zircaloy (Zr) in a reactivity insertion accident (RIA) in a PWR core. The power excursion as a result of a $1 reactivity insertion was calculated by a TRACE PWR plant model using point-kinetics, for alternative cores with UO{sub 2} and U{sub 3}Si{sub 2} fuel assemblies. The point-kinetics parameters (feedback coefficients, prompt-neutron lifetime and group constants for six delayed neutron groups) were obtained from beginning-of-cycle equilibrium full core calculations with PARCS. In the PARCS core calculations, the few-group parameters were developed utilizing the TRITON/NEWT tools in the SCALE package. In order to assess the fuel response in finer detail (e.g. the maximum fuel temperature), the power shape and thermal boundary conditions from the TRACE/PARCS calculations were used to drive a BISON model of a fuel pin with U{sub 3}Si{sub 2} and UO{sub 2} respectively. For a $1 reactivity transient, both TRACE and BISON predicted a higher maximum fuel temperature for the UO{sub 2} fuel than the U{sub 3}Si{sub 2} fuel. Furthermore, BISON is noted to calculate a narrower gap and a higher gap heat transfer coefficient than TRACE. This resulted in BISON predicting consistently lower fuel temperatures than TRACE. This study also provided a systematic comparison between TRACE and BISON using consistent transient boundary conditions. The TRACE analysis of the RIA only reflected the core-wide response in power. A refinement to the analysis would be to predict the local peaking in a three-dimensional core as a result of control rod ejection and at hot zero power conditions. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Sensitivity analysis of xenon reactivity temperature dependency for HTTR LOFC test by using Relap5-3D code - 18365

A high-temperature gas-cooled reactor (HTGR) has superior safety characteristics. A loss of forced cooling (LOFC) test using a high-temperature engineering test reactor (HTTR) was carried out to verify the inherent safety characteristic of HTGR when forced cooling is diminished without reactor scram. In the test, all-gas circulators were tripped with an initial reactor power of 9 MW. The reactor power decreased from 9 MW to 0 MW by negative reactivity feedback in the core. Re-criticality was shown after about 8 h. This study focused on developing a point kinetics method with RELAP5-3D code for an LOFC accident. For future HTGR design and safety analysis, point kinetics method is important because of simple method. One key element of the point kinetics method is the reactivity performance estimation. There is a large temperature difference between the inlet and outlet of the core in HTGR, and the temperature fluctuation range has been large in several accidents. We analyze the temperature dependency of xenon-135 reactivity and show that the temperature dependency of xenon-135 microscopic absorption cross-section affected the re-criticality time of the LOFC test. This finding will be useful for predicting the emerging time and the peak level of reactor power increase after becoming re-critical. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Application of the EPRI depletion reactivity benchmarks - 14423

The EPRI measured-based depletion reactivity benchmarks intend to facilitate the validation of burnup credit by validating the combined effect of changes in isotopic content and cross-sections. In the framework of burnup credit implementation for PWR fuels, this paper proposes to study the application of the EPRI benchmarks for a spent fuel pool criticality evaluation using the French tools: the DARWIN 2.2 depletion package and the CRISTAL V1 criticality safety package, both based on cross-section libraries from the JEF2.2 evaluation. For that purpose, the benchmarks are analyzed using the connection of DARWIN 2.2 with APOLLO2-MORET 4, allowing the determination of the bias for the reactivity decrement. Then, these results are used to define a bias to take into account in the criticality evaluation of a spent fuel pool. In addition, the benefit of the EPRI depletion reactivity benchmarks is assessed through a comparison with the validation approach adopted in France until now. The bias resulting from this latter approach is evaluated by 1) applying, to the calculated nuclides concentrations, isotopic penalizing factors derived from the comparison between calculated values of nuclide concentrations and experimental values obtained from used fuel chemical analyses from French reactors, 2) analyzing representative critical experiments. Additional analysis of the benchmarks using the connection of VESTA 2.1 with MORET 5 is performed as these codes allow calculations of complex 3D geometrical configurations and the use of various nuclear data libraries. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Reactivity effects at the Mayak production association, January 2, 1958 criticality accident using serpent 2 and openFOAM - 14444

The process nuclear criticality accident that occurred at the Mayak Production Association (Chelyabinsk-40) on January 2, 1958 involving a vessel of uranyl nitrate solution claimed the lives of three workers and left a fourth worker with continuing health problems. There are a myriad of uncertain parameters involved with this accident: What was the molarity of the solution? How much solution was in the vessel at the time of the accident? In what position was the vessel and the solution when it went critical? How important was the impact of reflection due to the workers and/or the floor? These uncertain parameters have made this accident particularly difficult to analyze in the past. This work aims to lower the uncertainty on some of these parameters. A most-probable solution composition is determined by comparing literature on the physical properties of uranyl nitrate solutions to those presented in LA-13638 [1], which describes the accident in question. Using this most-probable solution, the main contributions to the reactivity of the system and hence the eventual accident, are identified through Serpent 2 and OpenFOAM analyses. Serpent 2, a Monte Carlo software tool, is used to perform calculations of the reactivity effects of lowering the vessel toward the floor and the reactivity added by the close proximity of workers. OpenFOAM, a C++ partial differential equation solver toolkit, is used to simulate the fluid inside the vessel as the vessel is tipped. This is done by treating the solution and air inside the vessel as two incompressible, isothermal, and immiscible fluids using a volume of fluid (VoF) approach. The goal of this approach is simply to track the interface between the two fluids, and hence give an accurate description of the geometrical structure of the solution as the vessel is tipped. These two unique tools are then coupled to provide a time-dependent flow simulation to study the effect that the changing geometrical structure had on the criticality of the system, which is novel to the criticality safety field. This work provides a more accurate picture of the accident going forward. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

The composition of seawater and the effect of seawater immersion on reactivity - 14499

Following the Fukushima Daiichi accident a need arose to perform defense-in-depth analyses to assess the effect of seawater immersion on the reactivity of nuclear fuel. This paper derives a composition for Standard Seawater based on the Reference Composition using the International Thermodynamic Equation of Seawater - 2010 (TEOS-10). The Reference Composition for seawater is based on measurements of the Atlantic surface seawater and assumes no organic or inorganic material is entrained in the seawater. Using the Reference Composition, a methodology for determining the composition of seawater as a function of temperature, pressure and salinity is developed. These seawater compositions may be used in nuclear criticality safety analyses to determine the effect of seawater immersion on reactivity. Results of a sensitivity study are presented that illustrate the effect of seawater immersion and salinity on the reactivity of a representative low-enriched uranium critical assembly, LEU-COMP-THERM-002. (author)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

STARTUP REACTIVITY ACCOUNTABILITY ATTRIBUTED TO ISOTOPIC TRANSMUTATIONS IN THE IRRADIATED BERYLLIUM REFLECTOR OF THE HIGH FLUX ISTOTOPE REACTOR

The objective of this study is to develop a methodology to predict the reactivity impact as a function of outage time between cycles of 3He, 6Li, and other poisons in the High Flux Isotope Reactor s (HFIR) beryllium reflector. The reactivity worth at startup of the HFIR has been incorrectly predicted in the past after the reactor has been shut-down for long periods of time. The incorrect prediction was postulated to be due to the erroneous calculation of 3He buildup in the beryllium reflector. It is necessary to develop a better estimate of the start-of-cycle symmetric critical control element positions since if the estimated and actual symmetrical critical control element positions differ by more than $1.55 in reactivity (approximately one-half inch in control element startup position), HFIR is to be shutdown and a technical evaluation is performed to resolve the discrepancy prior to restart. 3He is generated and depleted during operation, but during an outage, the depletion of 3He ceases because it is a stable isotope. 3He is born from the radioactive decay of tritium, and thus the concentration of 3He increases during shutdown. The computer program SCALE, specifically the TRITON and CSAS5 control modules including the KENO V.A, COUPLE, and ORIGEN functional modules were utilized in this study. An equation relating the down time (td) to the change in symmetric control element position was generated and validated against measurements for approximately 40 HFIR operating cycles. The newly-derived correlation was shown to improve accuracy of predictions for long periods of down time.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Innovative Fast Reactors: Impact of Fuel Composition on Reactivity Coefficients

A major challenge for future Fast Reactors could be the recycling of minor actinides (MA) in the core fuel, in order to minimize wastes and contribute to meet both the sustainability objective and the reduction of the burden on a geological disposal. Although the most outstanding issues will be found in the development and validation of the appropriate fuels, the presence of MA in the core can potentially deteriorate the core reactivity coefficients. In the present paper we will show however that there is no physical limit to the amount of MA in the core fuel, but that a careful physics analysis can indicate the most appropriate measures to reduce the MA impact on the reactivity coefficients, and in particular, for Na cooled reactors, on the Na void reactivity coefficient.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

In situ observations on the coupling between hydraulic diffusivity and displacements during fault reactivation in shales

Key questions in fault reactivation in shales relate to the potential for enhanced fluid transport through previously low-permeability aseismic formations. Here, we explore the behavior of a 20 m long N0-to-170°, 75-to-80°W fault in shales that is critically stressed under a strike-slip regime (σ 1 = 4 ± 2 MPa, horizontal and N162° ± 15°E, σ 2 = 3.8 ± 0.4 MPa and σ 3 = 2.1 ± 1 MPa, respectively 7-8° inclined from vertical and horizontal and N72°). The fault was reactivated by fluid pressurization in a borehole using a straddle packer system isolating a 2.4 m long injection chamber oriented-subnormal to the fault surface at a depth of 250 m. A three-dimensional displacement sensor attached across the fault allowed monitoring fault movements, injection pressure and flow rate. Pressurization induced a hydraulic diffusivity increase from ~2 × 10 -9 to ~10 3 m 2 s -1 associated with a complex three-dimensional fault movement. The shear (x-, z-) and fault-normal (y-) components (U x , U y , and U z ) = (44.0 × 10 -6 m, 10.5 × 10 -6 m, and 20.0 × 10 -6 m) are characterized by much larger shear displacements than the normal opening. Numerical analyses of the experiment show that the fault permeability evolution is controlled by the fault reactivation in shear related to Coulomb failure. The large additional fault hydraulic aperture for fluid flow is not reflected in the total normal displacement that showed a small partly contractile component. This suggests that complex dilatant effects estimated to occur in a plurimeter radius around the injection source affect the flow and slipping patch geometries during fault rupture, controlling the initial slow slip and the strong back slip of the fault following depressurization.

58 GEOSCIENCES↗

Characterizing the Potential for Injection-Induced Fault Reactivation Through Subsurface Structural Mapping and Stress Field Analysis, Wellington Field, Sumner County, Kansas: Injection-Induced Fault Slip, Kansas

Kansas, like other parts of the central U.S., has experienced a recent increase in seismicity. Correlation of these events with brine disposal operations suggests pore fluid pressure increases are reactivating preexisting faults, but rigorous evaluation at injection sites is lacking. Here we determine the suitability of CO 2 injection into the Cambrian-Ordovician Arbuckle Group for long-term storage and into a Mississippian reservoir for enhanced oil recovery in Wellington Field, Sumner County, Kansas. To determine the potential for injection-induced earthquakes, we map subsurface faults and estimate in situ stresses, perform slip and dilation tendency analyses to identify well-oriented faults relative to the estimated stress field, and determine the pressure changes required to induce slip at reservoir and basement depths. Three-dimensional seismic reflection data reveal 12 near-vertical faults, mostly striking NNE, consistent with nodal planes from moment tensor solutions from recent earthquakes in the region. Most of the faults cut both reservoirs and several clearly penetrate the Precambrian basement. Drilling-induced fractures (N = 40) identified from image logs and inversion of earthquake moment tensor solutions (N = 65) indicate that the maximum horizontal stress is approximately EW. Slip tendency analysis indicates that faults striking <020° are stable under current reservoir conditions, whereas faults striking 020°–049° may be prone to reactivation with increasing pore fluid pressure. Although the proposed injection volume (40,000 t) is unlikely to reactive faults at reservoir depths, high-rate injection operations could reach pressures beyond the critical threshold for slip within the basement, as demonstrated by the large number of injection-induced earthquakes west of the study area.

54 ENVIRONMENTAL SCIENCES↗

Controlling Material Reactivity Using Architecture

3D-printing methods are used to generate reactive material architectures. We observed several geometric parameters in order to influence the resultant flame propagation velocity, indicating that the architecture can be utilized to control reactivity. Two different architectures, channels and hurdles, are generated, and thin films of thermite are deposited onto the surface. Additionally, the architecture offers a route to control, at will, the energy release rate in reactive composite materials.

36 MATERIALS SCIENCE↗

Ligand‐Based Control of Single‐Site vs. Multi‐Site Reactivity by a Trichromium Cluster

Abstract The trichromium cluster ( tbs L)Cr 3 (thf) ([ tbs L] 6− =[1,3,5‐C 6 H 9 (NC 6 H 4 ‐ o ‐NSi t BuMe 2 ) 3 ] 6− ) exhibits steric‐ and solvation‐controlled reactivity with organic azides to form three distinct products: reaction of ( tbs L)Cr 3 (thf) with benzyl azide forms a symmetrized bridging imido complex ( tbs L)Cr 3 ( μ 3 ‐NBn); reaction with mesityl azide in benzene affords a terminally bound imido complex ( tbs L)Cr 3 ( μ 1 ‐NMes); whereas the reaction with mesityl azide in THF leads to terminal N‐atom excision from the azide to yield the nitride complex ( tbs L)Cr 3 ( μ 3 ‐N). The reactivity of this complex demonstrates the ability of the cluster‐templating ligand to produce a well‐defined polynuclear transition metal cluster that can access distinct single‐site and cooperative reactivity controlled by either substrate steric demands or reaction media.

Bartholomew, Amymarie K.↗

Tuning the Reactivity of Cyclopropenes from Living Ring‐Opening Metathesis Polymerization (ROMP) to Single‐Addition and Alternating ROMP

Abstract Ring‐opening metathesis polymerization (ROMP) has become one of the most important living polymerizations. Cyclopropenes (CPEs) remain underexplored for ROMP. Described here is that the simple swap of 1‐methyl to 1‐phenyl on 1‐(benzoyloxymethyl)CPEs elicited strikingly different modes of reactivity, switching from living polymerization to either selective single‐addition or living alternating ROMP. The distinct reactivity stems from differences in steric repulsions at the Ru alkylidene after CPE ring opening. Possible olefin or oxygen chelation from ring‐opened CPE substituents was also observed to significantly affect the rate of propagation. These results demonstrate the versatility of CPEs as a new class of monomers for ROMP, provide mechanistic insights for designing new monomers with rare single‐addition reactivity, and generate a new functionalizable alternating copolymer scaffold with controlled molecular weight and low dispersity.

Su, Jessica K.↗

Quantifying the Influence of Covalent Metal‐Ligand Bonding on Differing Reactivity of Trivalent Uranium and Lanthanide Complexes

Abstract Qualitative differences in the reactivity of trivalent lanthanide and actinide complexes have long been attributed to differences in covalent metal‐ligand bonding, but there are few examples where thermodynamic aspects of this relationship have been quantified, especially with U 3+ and in the absence of competing variables. Here we report a series of dimeric phosphinodiboranate complexes with trivalent f ‐metals that show how shorter‐than‐expected U−B distances indicative of increased covalency give rise to measurable differences in solution deoligomerization reactivity when compared to isostructural complexes with similarly sized lanthanides. These results, which are in excellent agreement with supporting DFT and QTAIM calculations, afford rare experimental evidence concerning the measured effect of variations in metal‐ligand covalency on the reactivity of trivalent uranium and lanthanide complexes.

Fetrow, Taylor V.↗

Tuning the Reactivity of Cyclopropenes from Living Ring‐Opening Metathesis Polymerization (ROMP) to Single‐Addition and Alternating ROMP

Abstract Ring‐opening metathesis polymerization (ROMP) has become one of the most important living polymerizations. Cyclopropenes (CPEs) remain underexplored for ROMP. Described here is that the simple swap of 1‐methyl to 1‐phenyl on 1‐(benzoyloxymethyl)CPEs elicited strikingly different modes of reactivity, switching from living polymerization to either selective single‐addition or living alternating ROMP. The distinct reactivity stems from differences in steric repulsions at the Ru alkylidene after CPE ring opening. Possible olefin or oxygen chelation from ring‐opened CPE substituents was also observed to significantly affect the rate of propagation. These results demonstrate the versatility of CPEs as a new class of monomers for ROMP, provide mechanistic insights for designing new monomers with rare single‐addition reactivity, and generate a new functionalizable alternating copolymer scaffold with controlled molecular weight and low dispersity.

Su, Jessica K.↗