Search NASA⌕ Search

SEARCH · Search NASA

Results for “REPROCESSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

FY 2009 Progress: Process Monitoring Technology Demonstration at PNNL

Pacific Northwest National Laboratory (PNNL) is developing and demonstrating three technologies designed to assist in the monitoring of reprocessing facilities in near-real time. These technologies include 1) a multi-isotope process monitor (MIP), 2) a spectroscopy-based monitor that uses UV-Vis-NIR (ultraviolet-visible-near infrared) and Raman spectrometers, and 3) an electrochemically modulated separations approach (EMS). The MIP monitor uses gamma spectroscopy and pattern recognition software to identify off-normal conditions in process streams. The UV-Vis-NIR and Raman spectroscopic monitoring continuously measures chemical compositions of the process streams including actinide metal ions (uranium, plutonium, neptunium), selected fission products, and major cold flow sheet chemicals. The EMS approach provides an on-line means for separating and concentrating elements of interest out of complex matrices prior to detection via nondestructive assay by gamma spectroscopy or destructive analysis with mass spectrometry. A general overview of the technologies and ongoing demonstration results are described in this report.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CARBON BED MERCURY EMISSIONS CONTROL FOR MIXED WASTE TREATMENT

Mercury has had various uses in nuclear fuel reprocessing and other nuclear processes, and so is often present in radioactive and mixed (both radioactive and hazardous according tohe Resource Conservation and Recovery Act) wastes. Depending on regulatory requirements, the mercury in the off-gas must be controlled with sometimes very high efficiencies. Compliance to the Hazardous Waste Combustor (HWC) Maximum Achievable Control Technology (MACT) standards can require off-gas mercury removal efficiencies up to 99.999% for thermally treating some mixed waste streams. Several test programs have demonstrated this level of off-gas mercury control using fixed beds of granular sulfur-impregnated activated carbon. Other results of these tests include: (a) The depth of the mercury control mass transfer zone was less than 15-30 cm for the operating conditions of these tests, (b) MERSORB® carbon can sorb Hg up to 19 wt% of the carbon mass, and (c) the spent carbon retained almost all (98 – 99.99%) of the Hg; but when even a small fraction of the total Hg dissolves, the spent carbon can fail the TCLP test when the spent carbon contains high Hg concentrations. Localized areas in a carbon bed that become heated through heat of adsorption, to temperatures where oxidation occurs, are referred to as “bed hot spots.” Carbon bed hot spots must be avoided in processes that treat radioactive and mixed waste. Key to carbon bed hot spot mitigation are (a) designing for sufficient gas velocity, for avoiding gas flow maldistribution, and for sufficient but not excessive bed depth, (b) monitoring and control of inlet gas flowrate, temperature, and composition, (c) monitoring and control of in-bed and bed outlet gas temperatures, and (d) most important, monitoring of bed outlet CO concentrations. An increase of CO levels in the off-gas downstream of the carbon bed to levels about 50-100 ppm higher than the inlet CO concentration indicate CO formation in the bed, caused by carbon bed hot spots. Corrective actions must be implemented quickly if bed hot spots are detected, using a graded approach and sequence starting with corrective actions that are simple, quick, cause the least impact to the process, and are easiest to recover from. Multiple high and high-high alarm levels should be used, with appropriate corrective actions for each level.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Avoiding Carbon Bed Hot Spots in Thermal Process Off-Gas Systems

Mercury has had various uses in nuclear fuel reprocessing and other nuclear processes, and so is often present in radioactive and mixed (radioactive and hazardous) wastes. Test programs performed in recent years have shown that mercury in off-gas streams from processes that treat radioactive wastes can be controlled using fixed beds of activated sulfur-impregnated carbon, to levels low enough to comply with air emission regulations such as the Hazardous Waste Combustor (HWC) Maximum Achievable Control Technology (MACT) standards. Carbon bed hot spots or fires have occurred several times during these tests, and also during a remediation of tanks that contained mixed waste. Hot spots occur when localized areas in a carbon bed become heated to temperatures where oxidation occurs. This heating typically occurs due to heat of absoption of gas species onto the carbon, but it can also be caused through external means such as external heaters used to heat the carbon bed vessel. Hot spots, if not promptly mitigated, can grow into bed fires. Carbon bed hot spots and fires must be avoided in processes that treat radioactive and mixed waste. Hot spots are detected by (a) monitoring in-bed and bed outlet gas temperatures, and (b) more important, monitoring of bed outlet gas CO concentrations. Hot spots are mitigated by (a) designing for appropriate in-bed gas velocity, for avoiding gas flow maldistribution, and for sufficient but not excessive bed depth, (b) appropriate monitoring and control of gas and bed temperatures and compositions, and (c) prompt implementation of corrective actions if bed hot spots are detected. Corrective actions must be implemented quickly if bed hot spots are detected, using a graded approach and sequence starting with corrective actions that are simple, quick, cause the least impact to the process, and are easiest to recover from.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Radioactive waste management in France: taking-up present and future challenges - 15120

The reduction of the volume and radiotoxicity of radioactive waste has been one of the key drivers for the implementation of the French nuclear program. Interactions between the nuclear industry, the administration, the competent authorities and other stakeholders including the civil society has led to a continuous evolution of the industrial facilities, practices, solutions and products to move towards waste minimization. Bringing a solution to the management of ultimate radioactive waste is clearly a requirement for the sustainable development of nuclear energy whose crucial role in the world's future energy mix has been confirmed in the past few months by several international organizations. The first question to be answered concerns the definition of radioactive waste. This notion may be seen as self-evident. It is not. For example, used fuel is considered a High Level Waste in Finland or Sweden, but a recyclable material in countries including China, France, India, Japan, Russia, and the Netherlands. In France, a definition is provided by law to clarify this notion. Indeed, the 2006 French law concerning the Sustainable Management of Radioactive Materials and Waste stipulates that 'ultimate radioactive waste shall include any radioactive waste for which no further processing is possible under current technical and economic conditions, notably by extracting their recoverable fraction or by reducing their polluting or hazardous character'. Used fuel is thus reprocessed in order to reduce the final waste volume and long term radiotoxicity, while extracting value from the recovered materials. Even if the general approach and the processes may be common for waste management, it is important to clearly make the distinction between the wastes stemming from used fuel processing or conditioning (when considered as waste), the wastes generated through the operation of nuclear power plants and fuel cycle facilities, and the waste arising from the dismantling of nuclear installations. After a brief overview of the different types of waste stemming from nuclear power generation, this paper will review solutions and processes already implemented for their safe and efficient management. It will also practically illustrate the evolution of these processes and related facilities to further gain in efficiency, notably in terms of volume reduction; the related R and D outcomes will be addressed. It will also describe the upcoming challenges in this field and the envisioned solutions to respond to them; the efficiency, the completeness and consistency of these solutions with the currently considered global framework, based on a stepwise and long term approach from waste generation to disposal, will also be analyzed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Laser size reduction of contaminated Magnox Pond skips - 15166

The Magnox Pond Program Team at Hinkley Point A Power Station have successfully demonstrated the use of an automated Computer Numeric Controlled (CNC) dry milling process to efficiently decontaminate radioactive pond skips that were once used to store and transport Magnox spent fuel assemblies between reactor sites and Sellafield for reprocessing. This decontamination process has ensured ILW skips meet metal melt recycling criteria, and even Out of Scope levels, while at the same time producing dry swarf that is easily disposed of as ILW. However, the dry milling method requires the skips to be size reduced to a very simple flat geometry to simplify the milling operation. Several size reduction techniques (mechanical and thermal) have been evaluated. Based on the advantages of remote handling, high cutting speed, flexibility with complex geometries, reduced secondary waste production and significantly reduced worker exposure, robotically operated fibre delivered laser cutting was chosen. This paper describes the development, installation and operation of an automated laser cutting system commissioned at Hinkley Point A to size reduce contaminated skips in to five flat sections. It was demonstrated that a complete skip can be remotely size reduced in less than 60 minutes. This successful demonstration, coupled with CNC milling, has the potential to save an estimated British Pounds 30 million across the Magnox sites alone, with much higher saving potentials for skips stored at Sellafield, enabling this new size reduction process to meet cost reduction objectives of the UK's Nuclear Decommissioning Authority. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Decommissioning Experience at Rokkasho; Standing Type Manipulator: A1000S for Dismantling Tasks - 16434

Decommissioning is a technical process which includes various steps and processes from the clean-up of radioactive materials to the progressive demolition of the plant. One of these steps is the cutting of subassemblies, like tanks, pipes or walls in small pieces suitable for the sorting and disposal. Different solutions are offered for this cutting work and can be grouped as following: - Chip forming - sawing, drilling, milling, turning etc. - Shearing - punching, stamping, scissoring. - Abrading - Grinding, lapping, polishing; water-jet. - Heat - flame cutting, plasma cutting, laser cutting. - Electro-Chemical - Etching, Electrical discharge machining (EDM). Each method has its limitations in accuracy, cost, and effect on the material. In 2013, Waelischmiller Engineering won a contract for two remote handling systems dedicated to the dismantling cell at Rokkasho Nuclear Fuel Reprocessing Facility in Japan. For this project, Inconel and other metals needed to be cut. One of the main cutting methods was decided to use of an angle grinder handled by a robotic arm. Because the use of the overhead systems (bridges and cranes) was difficult for this installation, it was determined, that the best alternative was a power manipulator A1000 installed on the floor with a pre-positioning system. The project proceeded to go forward with the adaptation of the standard A1000 with integration of a control system in a Cartesian coordinate frame; resulting in a heavy duty arm; A1000S with 6 degrees of freedom. The heavy duty power arm A1000S was developed and designed for mechanical cutting with an angle grinder, especially for thick and hard material for example stainless steel and Inconel. Cutting a thick material with an angle grinder requires repeatable precise linear motion, in order not to damage the disc. The angle grinder should be handled with a manipulator which can cut in all directions in a linear motion, since the objects which should be cut are usually very large and fixed in any direction For these requirements, the Cartesian control function was added to our standard power manipulator type A1000. In some cases, the decommissioning work includes repeated access routes or fixed access points that the manipulator arm has to pass repeatedly. For example a fixed point where the waste materials are collected, or repeated transport route that the arm has to go along for each step. For this requirement, the A1000S has been equipped with the 'Go To-Mode'. It is a 'teach and playback mode' which has been developed especially for remote operating manipulators. Quick direct teach, quick play function and an intuitive touch-panel layout are some of the features. With the Go To-Mode high working efficiency was achieved. After rigorous testing at Waelischmiller premises; the manipulator was delivered to JNFL in Rokkasho. It was found that the obtained functionality and precision can be applicable not only for the cutting with a disc grinder, but also the laser cutting method, which requires precise trajectory control. This paper will provide: - A project description, - Presentation of solution process, - Technical description of the A1000S, - Future Applications of the robotic Arm A1000S. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Gas Retention and Release from Nuclear Legacy Waste - 16449

The retention of gas within corroded magnox sludge waste at Sellafield, UK and secondary reprocessing waste at Hanford, USA has significant economic and safety implications for decommissioning various nuclear legacy buildings, including the magnox swarf storage silos and first generation magnox storage pond. A series of laboratory scale gas retention tests within magnesium hydroxide soft sediments have revealed a 4-51 Pa yield stress range where consolidated beds could retain sufficient gas to become buoyant with respect to a water supernatant. Density inversion could lead to a Rayleigh-Taylor style instability which could result in an upward transfer of radioactive material from the consolidated bed. The applicable yield stress range suggests that such rollover events may occur in weaker sediment than previously hypothesized, based on current understanding of the fluidization and stable channel mechanisms for gas release from weak and very strong sediments respectively. X-ray computed tomography images of gas retained by 7 Pa yield stress soft sediment reveal both a stable foam layer at the top of the bed and regions dense with micro-bubbles which could provide pathways for gas transport through the bed. Extension of these pathways, hidden below the surface of the sediment, to the container walls and the foam layer could represent a novel mechanism for gas release from intermediate strength sediments of <100 Pa yield stress. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Robotics for Nuclear Monitoring and Inspection - 18029

As a greater number of the world's nuclear facilities approach the end of their planned lifetime and enter the decommissioning and dismantling phase, a greater impetus than ever is being placed on the use of novel technologies to assist in this otherwise extremely lengthy, complicated and costly process. Being host to numerous first-generation plants, as well as the Sellafield Limited nuclear reprocessing facility, the UK is now requiring the use of a range of robotic systems and is well-placed to act as a test-bed for the deployment of these platforms. Presented in this work is the overview of the wide range of robotic research that is occurring at the University of Bristol. Not limited to ground-based platforms - those developed at the University Bristol,UK, include; airborne, underwater as well as pipeline network monitoring systems. Through the application of each of these robotic systems, not only is the dose-rate otherwise experienced by the operator removed, but the costs associated with the work are also significantly reduced, as well as the speed at which it is performed dramatically increased. All the systems descried in this work have been successfully deployed at one (or multiple) nuclear sites, with the results used to inform further decommissioning - typically within environments previously uncharacterised due either to their inaccessibility or high levels of radioactivity. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The Strategic Benefit of Self Shielded Boxes for Storage and Disposal of Metallic Uranic Material-18141

Sellafield Ltd, on behalf of the Nuclear Decommissioning Authority (NDA), is responsible for the management of a number of facilities whose inventories include a range of metallic uranic material. Additional fuel and fuel bearing materials exist in the NDA estate, some of which are similar to the Sellafield-managed inventory and others present different management challenges. Whilst UK Government policy directs that some of these materials are assets and are therefore managed with eventual future use in mind, there remains a large quantity of material, principally either out-of-scope for reprocessing or which derives from legacy facilities, which is likely to be disposed of to a future Geological Disposal Facility (GDF). The majority of this material is stored under wet conditions to facilitate dose shielding and heat dissipation and will therefore require removal from wet storage, consolidation and conditioning, prior to transfer to GDF. In order to accelerate high hazard and risk reduction by sooner retrieval of legacy material from wetted storage, one of the legacy storage facilities has led technical work to develop the design of Self Shielded Boxes (SSBs) and to substantiate their use for interim storage of the materials in question. Use of the SSBs would represent a change of strategy on the Sellafield Site: historically, timescales for retrieval of material have been reliant upon a waste treatment and storage/disposal route being available. SSBs provide the opportunity to retrieve uranic materials from aging legacy storage facilities for immediate buffer storage, by decoupling the timing of retrieval from the availability of an onward route. An understanding was required of the scope for defining optimal routes for each metallic uranic fuel and fuel bearing material group for safe transport and storage commensurate with current final disposal assumptions and risks, taking into account international best practice. A study is underway to understand options for transfer of material into SSBs, buffer/interim storage locations, treatment/conditioning processes and transport to the GDF. This work forms the basis of a prioritised road-map for the development of routes for study material groups aligned with ongoing and existing planned technical work, which is a pre-requisite to strategy development. The ultimate output of the study will be identification of full life cycle management strategies for metallic uranic material from an enterprise perspective. The combination of this strategic work and ongoing technical work will underpin a series of decisions to divert sub-groups of uranic material away from currently assumed baseline routes in support of earliest practicable hazard and risk reduction. Hence, each decision will reduce the scope of a placeholder future uranic fuel treatment capability, which will diminish the associated British Pound 1 bn capital cost. To date, a technical case for interim storage of uranic material in SSBs has been substantiated for around two thirds of the study materials. The requirement for a new strategy at Sellafield was driven by technical development of SSBs in response to the needs of one programme, but this prompted the study into the potential utilisation of SSBs in order to derive benefit for the wider enterprise and across the NDA estate. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Recovery from feeding unconditioned feed to part of the solvent extraction process in Thorp - 14430

A recent event in the Thorp Reprocessing Plant involved unconditioned feed being sent to one of the main process solvent extraction vessels. As the feed was unconditioned the fissile material was lost to the aqueous raffinate stream. The plant was tripped and shutdown in line with the baseline criticality safety case. This paper describes the recovery option that was taken to remove the Pu from the raffinate tank and safely consign it to the downstream effluent vessels. Key assumptions that were fundamental to maintaining criticality safety throughout these operations were clearly highlighted in the supporting criticality safety assessment. Key learning points that are of relevance to the wider criticality safety assessment community are pulled out at the end of this paper. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Experimental Validation of the Multi-Isotope Process Monitor Concept

Researchers from Pacific Northwest National Laboratory, in conjunction with personnel from The Ohio State University, are working to develop a system for monitoring spent nuclear fuel reprocessing facilities on-line, non-destructively, and in near-real-time. This method, known as the Multi-Isotope Process (MIP) Monitor, is based upon the measurement of distribution patterns of a suite of indicator (radioactive) isotopes present within particular process streams. Distribution patterns, monitored on-line by gamma spectrometry, are then compared in near-real-time to patterns representing "normal" process conditions using multivariate pattern recognition software. By targeting gamma-emitting indicator isotopes, the MIP Monitor approach is compatible with the use of small, portable, high-resolution gamma detectors that may be easily deployed throughout the facility. In addition, utilization of a suite of radio-elements, including ones with multiple oxidation states, increases the likelihood that attempts to divert material via process manipulation would be detected. Proof-of-principle modeling exercises simulating changes in acid strength have been completed and the results are promising. Laboratory validation is currently under way and significant results are available. The latest experimental results, along with an overview of the method will be presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

FUNCTIONALIZED SILICA AEROGELS: ADVANCED MATERIALS TO CAPTURE AND IMMOBILIZE RADIOACTIVE IODINE

To support the future expansion of nuclear energy, an effective method is needed to capture and safely store radiological iodine-129 released during reprocessing of spent nuclear fuel. Various materials have been investigated to capture and immobilize iodine. In most cases, however, the materials that are effective for capturing iodine cannot subsequently be sintered/densified to create a stable composite that could be a viable waste form. We have developed chemically modified, highly porous, silica aerogels that show sorption capacities higher than 440 mg of I2 per gram at 150 C. An iodine uptake test in dry air containing 4.2 ppm of iodine demonstrated no breakthrough after 3.5 h and indicated a decontamination factor in excess of 310. Preliminary densification tests showed that the I2-loaded aerogels retained more than 92 wt% of I2 after thermal sintering with pressure assistance at 1200 C for 30 min. These high capture and retention efficiencies for I2 can be further improved by optimizing the functionalization process and the chemistry as well as the sintering conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

{sup 14}C Entry into the Atmosphere

{sup 14}C enters the atmosphere in amounts equivalent to 1.4 PBq/yr with total accumulation 140 PBq via cosmic radiation. As a result of nuclear explosions (1950–1969), its activity in the atmosphere exceeded 200 PBq. At present, {sup 14}C has been completely removed into bottom waters and sedimentary rocks in the ocean. The activity of the {sup 14}C entering the atmosphere from all operating nuclear reactors equals ~0.3 PBq/yr and the amount from all spent fuel reprocessing facilities equals ~0.06 PBq/yr. The admissible levels of {sup 14}C emissions must not exceed levels corresponding to peroral intake dose 10 μSv/yr. This is can be accomplished by means of a system of measures: reduction of the volume of technogenic gases and their {sup 12}CO{sub 2} content, combining high-efficiency purification with dispersion through high exhaust-stacks, and developing new technologies and reagents binding {sup 14}C in compact forms.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Response of soil bacteria to PUREX chemicals suggests biomarker utility and bioremediation potential

Chemicals involved in plutonium uranium reduction extraction (PUREX) can be released from nuclear reprocessing facilities and accumulate in the environment. We exposed chemically diverse soils to a range of concentrations of key chemicals used in the PUREX process. The responses of soil microbial communities are dependent on soil type, and tributyl phosphate exposure generates the most reproducible changes in microbial communities. We reconstructed the genomes of key bacteria and find several phosphotriesterase genes found only in Rhizobiaceae. The abundance of phosphotriesterase genes is significantly higher in samples exposed to tributyl phosphate. In conclusion, these phosphotriesterase genes may be involved in breakdown of tributyl phosphate, and a means of accessing phosphate for these bacteria.

Bioremediation↗

Phase Characteristics of a U-22Pu-4Am-2Np-40Zr Metallic Alloy Containing Rare Earths

Metallic fuel alloys consisting of uranium, plutonium, and zirconium with minor additions of americium and neptunium are under evaluation for potential use to transmute long-lived transuranic actinide isotopes in fast reactors. The current irradiation test series design, designated AFC2, includes minor additions of rare earth elements to simulate expected fission product carryover from the electrochemical molten salt reprocessing technique. The as-cast fuel alloys have been investigated for phase and thermal properties, specifically, enthalpies of transition, transition temperatures, and room temperature phase characteristics. Results and observations related to these characteristics for the “fresh” fuel alloys are provided. The alloy compositions are based on a U 30Pu 5Am-3Np-20Zr alloy, along with additions of 1 and 1.5 wt% RE (at the expense of uranium) where RE denotes rare earth alloy of cerium, lanthanum, praseodymium, and neodymium). Phase behavior and associated transitions have been compared to available U-Pu-Zr ternary diagrams with acceptable agreement. Enthalpies of transition were deconvoluted from heating and cooling thermal traces for relatively reliable values. The rare earth additions to the base alloy have a minimal influence on the room temperature phases present and phase transition temperatures, but the room temperature phases present did impact the enthalpies of transition.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Strategies for thorium fuel cycle transition in the SD-TMSR

Liquid-fueled Molten Salt Reactor (MSR) systems represent advances in safety, economics, and sustainability. The MSR has been designed to operate with a Th/ 233 U fuel cycle with 233 U used as startup fissile material. Since 233 U does not exist in nature, we must examine other available fissile materials to start up these reactor concepts. This work investigates the fuel cycle and neutronics performance of the Single-fluid Double-zone Thorium-based Molten Salt Reactor (SD-TMSR) with different fissile material loadings at startup: High Assay Low Enriched Uranium (HALEU) (19.79%), Pu mixed with HALEU (19.79%), reactor-grade Pu (a mixture of Pu isotopes chemically extracted from Pressurized Water Reactor (PWR) spent nuclear fuel (SNF) with 33 GW d/tHM burnup), transuranic elements (TRU) from Light Water Reactor (LWR) SNF, and 233 U. The MSR burnup routine provided by SERPENT-2 is used to simulate the online reprocessing and refueling in the SD-TMSR. The effective multiplication factor, fuel salt composition evolution, and net production of 233 U are studied in the present work. Additionally, the neutron spectrum shift during the reactor operation is calculated. The results show that the continuous flow of reactorgrade Pu helps transition to the thorium fuel cycle within a relatively short time (≈ 4.5 years) compared to 26 years for 233 U startup fuel. Finally, using TRU as the initial fuel materials offers the possibility of operating the SD-TMSR for an extended period of time (≈ 40 years) without any external feed of 233 U.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Interaction between BaCO{sub 3} and OPC/BFS composite cements at 20 {sup o}C and 60 {sup o}C

A BaCO{sub 3} slurry, containing radioactive {sup 14}C, is produced during the reprocessing of spent nuclear fuel. This slurry is encapsulated in a Portland-blastfurnace slag composite cement. The effect of BaCO{sub 3} on the hydration of OPC and Portland-blastfurnace slag cements has been studied in this work. Samples containing a simulant BaCO{sub 3} slurry were cured for up to 720 days at 20 and 60 {sup o}C and analysed by XRD, SEM(EDX) and ICC. BaCO{sub 3} reacted with OPC to precipitate BaSO{sub 4} from a reaction between soluble sulfate and BaCO{sub 3}. Calcium monocarboaluminate subsequently formed from the carbonate released. The monocarboaluminate precipitated as crystals in voids formed during hydration. At 60 {sup o}C in OPC, it was not identified by XRD, suggesting the phase is unstable in this system around this temperature. In the Portland-blastfurnace slag cements containing BaCO{sub 3}, less monocarboaluminate and BaSO{sub 4} were formed, but the hydration of BFS was promoted and monocarboaluminate was stable up to 60 {sup o}C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and modeling studies of PR and ND oxalate solubility to high ionic strengths: Insight into actinide(III) oxalates

Actinide oxalates are chemical compounds important to nuclear industry, ranging from actinide separation in waste reprocessing, to production of specialty actinides, and to disposal of high level nuclear waste (HLW) and spent nuclear fuel (SNF). In this study, the solubility constants for Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O by performing solubility experiments in HNO 3 and mixtures of HNO 3 and H 2 C 2 O 4 at 23.0 ± 0.2 °C have been determined. The targeted starting materials, Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O, were successfully synthesized at room temperature using PrCl 3 , NdCl 3 and oxalic acid as the source metrials. Then, we utilized the targeted solubility-controlling phases to conduct solubility measurements. There was no phase change over the entire periods of experiments, demonstrating that Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O were the solubility-controlling phases in our respective experiments. Based on our experimental data, we have developed a thermodynamic model for Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O in the mixtures of HNO 3 and H 2 C 2 O 4 to high ionic strengths. The model for Pr 2 (C 2 O 4 ) 3 •10H 2 O reproduces well the reported experimental data for Pu 2 (C 2 O 4 ) 3 •10H 2 O, which are not utilized for the model development, demonstrating that Pr(III) is an excellent analog for Pu(III). Similarly, the model for Nd 2 (C 2 O 4 ) 3 •10H 2 O reproduces the solubility of Am 2 (C 2 O 4 ) 3 •10H 2 O and Cm 2 (C 2 O 4 ) 3 •10H 2 O. The Pitzer model was used for the calculation of activity coefficients. Based on the published, well established model for dissociation constants for oxalic acid and stability constants for actinide-oxalate complexes [i.e., AmC 2 O 4 + , and Am(C 2 O 4 ) 2 - ] to high ionic strengths, we have obtained the solubility constants (log 10 K 0 ) for the following reactions at 25 °C, Pr 2 (C 2 O 4 ) 3 •10H 2 O ⇌ 2Pr 3+ + 3C 2 O 4 2- + 10H 2 O(l). Nd 2 (C 2 O 4 ) 3 •10H 2 O ⇌ 2Nd 3+ + 3C 2 O 4 2- + 10H 2 O(l). to be -30.82 ± 0.30 (2σ), and - 31.14 ± 0.35 (2σ), respectively. These values for can be directly applied to Pu 2 (C 2 O 4 ) 3 •10H 2 O, Am 2 (C 2 O 4 ) 3 •10H 2 O and Cm 2 (C 2 O 4 ) 3 •10H 2 O. The model established for actinide oxalates by this study provides the needed knowledge with regard to solubilities of actinide/REE oxalates at various ionic strengths, and is expected to find applications in many fields, including the geological disposal of nuclear waste and the mobility of REE under the surface conditions, as Pr 2 (C 2 O 4 ) 3 •10H 2 O and Nd 2 (C 2 O 4 ) 3 •10H 2 O can be regarded as the pure Pr and Nd end-members of deveroite, a recently discovered natural REE oxalate with the following stoichiometry, (Ce 1.01 Nd 0.33 La 0.32 Pr 0.11 Y 0.11 Sm 0.01 Pb 0.04 U 0.03 Th 0.01 Ca 0.04 ) 2.01 (C 2 O 4 ) 2.99 •9.99H 2 O. Regarding its importance in the geological disposal of nuclear waste, Am 2 (C 2 O 4 ) 3 •10H 2 O/Pu 2 (C 2 O 4 ) 3 •10H 2 O/Cm 2 (C 2 O 4 ) 3 •10H 2 O can be the source-term phase for actinides, as demonstrated by the instance in the disposal in clay/shale formations. This is exemplified by the stability of Am 2 (C 2 O 4 ) 3 •10H 2 O in comparison with Am(OH) 3 (am), Am(OH) 3 (s) and AmCO 3 (OH)(s) under the relevant geological repository conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗