Search NASA⌕ Search

SEARCH · Search NASA

Results for “Seat”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Blowing Agents for Fabrication of Polyimide Foams

Polyimide resin can be foamed by agent generated within matrix of powder precursor. Blowing agent is mixture of water and methanol that are byproducts of condensation/polymerization reaction in resin. Expansion of these two compounds produces cellular foam structure that is flexible and resilient but that tends to have very-fine cellular structure. More open structure with lower density can be attained by modifying mechanism of foam formation. Foams have applications as fillers for seat cushions, wall panels, floor sheets, and thermal and acoustical insulation.

Gagliani, J.↗

Yielding Torque-Tube System Reduces Crash Injuries

Yielding torque-tube system minimizes injuries by limiting load transferred to occupant in crash. When properly integrated into seat structure, torque tube yields in plastic deformation stage of material and maintains a relatively constant resistance to applied torque for many degrees of rotation. Yielding torque-tube system is expected to find application in aircraft and automobile industries.

Mcsmith, D. G.↗

A family of supersonic airplanes: Technical and economic feasibility

To improve the prospects for success in the market place, the family approach is essential to the design of future supersonic airplanes. The evolution from a basic supersonic airplane to a family could follow historic patterns, with one exception: substantial changes in passenger carrying capacity will be difficult by the conventional fuselage "doughnut" approach so successfully used on the cylindrical fuselage of subsonic airplanes. The primary reasons for this difference include the requirement for highly integrated "area ruled" configurations, to give the desired high supersonic aerodynamic efficiency, and other physical limitations such as takeoff and landing rotation. A concept for a supersonic airplane family that could effectively solve the variable range and passenger capacity problem provides for modification of the fuselage cross section that makes it possible to build a family of three airplanes with four, five, and six abreast passenger seating. This is done by replacing or modifying portions of the fuselage. All airplanes share the same wing, engines, and major subsystems. Only small sections of the fuselage would be different, and aerodynamic efficiency need not be compromised.

Neumann, F. D.↗

Supersonic market and economic analyses

Advanced supersonic transport markets of the free world were projected for the period 1985 to 2004. Passenger traffic volume and airplane range and seat capacity requirements were estimated for Mach 2.2 service by international regional area market areas and by city pairs within and between these areas. Market factors and traffic factors examined include variable loads, growth rates, supersonic transport market shares, and schedule frequencies considering the different makeup of passenger traffic and individual city pairs. Direct, indirect, and total operating costs and yield levels were economically analyzed for first class and full fare economy class traffic.

Rochte, L. S.↗

Fireworthiness of transport aircraft interior systems

The key materials question is addressed concerning the effect of interior systems on the survival of passengers and crew in the case of an uncontrolled transport aircraft fire. Technical opportunities are examined which are available through the modification of aircraft interior subsystem components, modifications that may reasonably be expected to provide improvements in aircraft fire safety. Subsystem components discussed are interior panels, seats, and windows. By virtue of their role in real fire situations and as indicated by the results of large scale simulation tests, these components appear to offer the most immediate and highest payoff possible by modifying interior materials of existing aircraft. These modifications have the potential of reducing the rate of fire growth, with a consequent reduction of heat, toxic gas, and smoke emission throughout the habitable interior of an aircraft, whatever the initial source of the fire.

Parker, J. A.↗

NASA/FAA general aviation crash dynamics program

The program involves controlled full scale crash testing, nonlinear structural analyses to predict large deflection elastoplastic response, and load attenuating concepts for use in improved seat and subfloor structure. Both analytical and experimental methods are used to develop expertise in these areas. Analyses include simplified procedures for estimating energy dissipating capabilities and comprehensive computerized procedures for predicting airframe response. These analyses are developed to provide designers with methods for predicting accelerations, loads, and displacements on collapsing structure. Tests on typical full scale aircraft and on full and subscale structural components are performed to verify the analyses and to demonstrate load attenuating concepts. A special apparatus was built to test emergency locator transmitters when attached to representative aircraft structure. The apparatus is shown to provide a good simulation of the longitudinal crash pulse observed in full scale aircraft crash tests.

Thomson, R. G.↗

Spacelab flight simulated by two monkeys at CERMA

A semiautomatic module for two monkeys was designed. The module shelters two Rhesus monkeys seated side by side in a compartment, reducing the emotional stresses caused by isolation. Food pellets, water, and air are supplied and body wastes are automatically removed. Physiological and environmental parameters are continually monitored, making possible the performance of experiments concerning the pathophysiological mechanisms of the disorders of weightlessness. A ten day flight of the module in Spacelab was simulated.

Langereux, P.↗

Coalignment of spacecraft experiments

On February 14, 1980, the solar maximum mission (SMM) satellite was launched into orbit with experiments to monitor solar activity. In order to obtain common object observations, experiments must be coaligned within 90 arc-seconds of the spacecraft pointing vector. Hardware designed to minimize structural and thermal distortions of the experiment support plate is described. Coalignment was provided through control of interface which combined flexible blades to limit load transfer and spherical seats for alignment reference.

Federline, R. E.↗

Study of aircraft crashworthiness for fire protection

Impact-survivable postcrash fire accidents were surveyed. The data base developed includes foreign and domestic accidents involving airlines and jet aircraft. The emphasis was placed on domestic accidents, airlines, and jet aircraft due principally to availability of information. Only transport category aircraft in commercial service designed under FAR Part 25 were considered. A matrix was prepared to show the relationships between the accident characteristics and the fire fatalities. Typical postcrash fire scenaries were identified. Safety concepts were developed for three engineering categories: cabin interiors - cabin subsystems; power plant - engines and fuel systems; and structural mechanics - primary and secondary structures. The parameters identified for concept evaluation are cost, effectiveness, and societal concerns. Three concepts were selected for design definition and cost and effectiveness analysis: improved fire-resistant seat materials; anti-misting kerosene; and additional cabin emergency exits.

Cominsky, A.↗

Energy absorption studied to reduce aircraft crash forces

The NASA/FAA aircraft safety reseach programs for general aviation aircraft are discussed. Energy absorption of aircraft subflooring and redesign of interior flooring are being studied. The testing of energy absorbing configurations is described. The three NASA advanced concepts performed at neary the maximum possible amount of energy absorption, and one of two minimum modifications concepts performed well. Planned full scale tests are described. Airplane seat concepts are being considered.

Source record↗

Heat flow from Io /JI/

The existing ground-based measurements of Io's thermal emission at infrared wavelengths of 8.4, 10.6, and 21 microns have been reexamined. Present in these data is the signature of hot spots, presumably similar to the hot spots seen by the IRIS experiment on Voyager. It is possible to extract from these data the total amount of power radiated. Since the hot spots are believed to be a result of deep-seated activity in Io and since the remainder of Io's surface is an extraordinarily poor thermal conductor, the power radiated by the hot spots is essentially the total heat flow. The analysis yields a heat flow of 2 + or - 1 W/sq m. This value is tremendously large in comparison to the average heat flow of the earth (0.06 W/sq m) and the moon (0.02 W/sq m), but is characteristic of active geothermal areas on the earth. A heat flow this large requires that the interior of Io be at least partially molten on a global scale.

Matson, D. L.↗

Sensation of rotation about a vertical axis with a fixed visual field in different illuminations and in the dark

The effects of the oculogyro illusion of the relative motion of a spot fixed with respect to the subject during subject rotation and of a fixed striped peripheral visual field under different levels of illumination on perceptions of rotation about a vertical axis are investigated. Subjects were seated in a rotatable flight trainer cockpit with visual fields consisting of darkness, a dim peripheral field, and a bright peripheral field, all fixed with respect to the subject, and subject perceptual thresholds, frequency responses and sensations of displacement and velocity were measured during trainer rotation at constant and varying angular accelerations. The perception of angular acceleration is found to exhibit a significantly lower threshold and a reduced latency time in the illuminated visual fields which was independent of the level of illumination. Subjective frequency responses showed a higher gain in the illuminated presentations, while subjective displacements during triangular velocity stimuli exhibited no difference for the different visual cues. Finally, magnitude estimations of the after-rotation associated with deceleration from a constant velocity showed a greater rising speed, larger velocity and longer duration under illumination. Results show that, for low accelerations, the visual input enhances sensitivity to self-motion, an effect explained by the oculogyral illusion.

Huang, J.↗

Aircraft subfloor response to crash loadings

Results are presented of an experimental and analytical study of the dynamic response to crash loadings of five different load-limiting subfloors for general aviation aircraft. These subfloors provide a high-strength structural floor platform to retain the seats and a crushable zone to absorb energy and limit vertical loads. Experimental static load-deflection data and dynamic deceleration response data for the five subfloors indicated that the high-strength floor platform performed well in that structural integrity and residual strength was maintained throughout the loading cycle. The data also indicated that some of the subfloor crush zones were more effective than others in providing nearly constant load for a range of displacement. The analytical data was generated by characterizing the nonlinear crush zones of the subfloor with static load-deflection data and using the DYCAST nonlinear finite element computer program. Comparisons between experimental and analytical data showed good correlation for the subfloors in which the static deformation mode closely approximated the dynamic deformation mode.

Carden, H. D.↗

Hydrazine-Compatible Elastomer

Hydrazine hardly reacts with ethylene propylene diene monomer, even at high temperatures. According to report to tests, EPDM is most hydrazine-compatible material among elastomers. Has strong potential as valve-seat and O-ring seal with hydrazine, especially at high temperatures.

Markles, O., F.↗

Pressure Relief Valve

Valve cap seated on an O-ring lifts to relieve positive pressure. Is attached to vacuum system by screw-on housing. Caps are loosely tied to pipe with twine or thin wire to make recovery simple.

Brabbs, T. A.↗

Ferrofluid Would Seal Linear-Motion Valve

Proposed valve employs ferrofluid to make tight seal. Seal requires no precisely machined parts, and hand lapping of valve seats are unnecessary. Magnetic fluid fills gap between shaft and annular pole piece in chamber wall. Precise shaft fit is not necessary.

Chandler, J. A.↗

Scriber for silicon wafers

A device for dividing silicon wafers into rectangular chips is characterized by a base including a horizontally oriented bed with a planar support surface, a vacuum chuck adapted to capture a silicon wafer seated on the support for translation in mutually perpendicular directions. A stylus support mounted on the bed includes a shaft disposed above and extended across the bed and a truck mounted on the shaft and supported thereby for linear translation along a path extended across the bed a vertically oriented scribe has a diamond tip supported by the truck also adapted as to engage a silicon wafer captured by the chuck and positioned beneath it in order to form score lines in the surface of the wafer as linear translation is imparted to the truck. A chuck positioning means is mounted on the base and is connected to the chuck for positioning the chuck relative to the stylus.

Yamakawa, K. A.↗

Modified face seal for positive film stiffness

The film stiffness of a face seal is improved without increasing the sealing and dam area by using an apparatus which includes a primary seal ring in the form of a nose piece. A spring forces a sealing surface on the seal ring into sealing contact with a seat to form a face seal. A circumferential clearance seal is formed in series with this face seal by a lip on the piece. The width of the surface of the lip is substantially the same as the width of the sealing surface on the face seal and the clearance between the surface on the lip and the shaft is substantially the same as the spacing between the face sealing surfaces on the face seal when the shaft is rotating. The circumferential clearance seal restricts the flow of fluid from a main cavity to an intermediate cavity with a resulting pressure drop. The hydrostatic opening face is strongly dependent on the face seal clearance, and the desired axial stiffness is achieved.

Etsion, I.↗