Search NASA⌕ Search

SEARCH · Search NASA

Results for “Space-based”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Optimal design of a space power system

The aerospace industry, like many other industries, regularly applies optimization techniques to develop designs which reduce cost, maximize performance, and minimize weight. The desire to minimize weight is of particular importance in space-related products since the costs of launch are directly related to payload weight, and launch vehicle capabilities often limit the allowable weight of a component or system. With these concerns in mind, this paper presents the optimization of a space-based power generation system for minimum mass. The goal of this work is to demonstrate the use of optimization techniques on a realistic and practical engineering system. The power system described uses thermoelectric devices to convert heat into electricity. The heat source for the system is a nuclear reactor. Waste heat is rejected from the system to space by a radiator.

Chun, Young W.↗
NASA NTRS1991

Discrete Kalman filtering equations of second-order form for control-structure interaction simulations

A second-order form of discrete Kalman filtering equations is proposed as a candidate state estimator for efficient simulations of control-structure interactions in coupled physical coordinate configurations as opposed to decoupled modal coordinates. The resulting matrix equation of the present state estimator consists of the same symmetric, sparse N x N coupled matrices of the governing structural dynamics equations as opposed to unsymmetric 2N x 2N state space-based estimators. Thus, in addition to substantial computational efficiency improvement, the present estimator can be applied to control-structure design optimization for which the physical coordinates associated with the mass, damping and stiffness matrices of the structure are needed instead of modal coordinates.

Park, K. C.↗
NASA NTRS1992

Integration of space and in-situ observations to study atmosphere, ocean and land processes

A research investigation was conducted into the possibility of using atmospheric observations made in the past from both terrestrial and space-based platforms to create a global, coherent four dimensional analysis for the purpose of studying atmospheric, oceanic, and land surface processes relevant to climate simulation, monitoring, and change. This investigation consisted of the following tasks: (1) a mature global data assimilation system was obtained from the National Meteorological Center and modified for use on a Cray X-MP computer system; (2) atmospheric observations for the period 20 Nov. 1982 through 1 Mar. 1983, including rawinsonde soundings, aircraft-based measurements, pilot balloons, and temperature soundings from polar orbiting satellites were obtained from several sources; and (3) the global data assimilation system was used to reassimilate the atmospheric observations to produce a new atmospheric analysis which was then compared with the contemporaneous analysis. The global hydrologic cycle, including fluxes between the atmosphere and both the land and ocean surfaces, was estimated. The flux of water from the ocean surface into the atmosphere, its transport in the form of latent heat to remote regions, and its return to the surface in the form of precipitation were estimated globally. In addition, several regional budgets for selected tropical oceanic and extratropical continental areas were also done.

Shukla, J.↗
NASA NTRS1991

Implementation issues for a compact 6 degree of freedom force reflecting handcontroller with cueing of modes

Teleoperated control requires a master human interface device that can provide haptic input and output which reflect the responses of a slave robotic system. The effort reported in this paper addresses the design and prototyping of a six degree-of-freedom (DOF) Cartesian coordinate hand controller for this purpose. The device design recommended is an XYZ stage attached to a three-roll wrist which positions a flight-type handgrip. Six degrees of freedom are transduced and control brushless DC motor servo electronics similar in design to those used in computer controlled robotic manipulators. This general approach supports scaled force, velocity, and position feedback to aid an operator in achieving telepresence. The generality of the device and control system characteristics allow the use of inverse dynamics robotic control methodology to project slave robot system forces and inertias to the operator (in scaled form) and at the same time to reduce the apparent inertia of the robotic handcontroller itself. The current control design, which is not multiple fault tolerant, can be extended to make flight control or space use possible. The proposed handcontroller will have advantages in space-based applications where an operator must control several robot arms in a simultaneous and coordinated fashion. It will also have applications in intravehicular activities (within the Space Station) such as microgravity experiments in metallurgy and biological experiments that require isolation from the astronauts' environment. For ground applications, the handcontroller will be useful in underwater activities where the generality of the proposed handcontroller becomes an asset for operation of many different manipulator types. Also applications will emerge in the Military, Construction, and Maintenance/Manufacturing areas including ordnance handling, mine removal, NBC (Nuclear, Chemical, Biological) operations, control of vehicles, and operating strength and agility enhanced machines. Future avionics applications including advanced helicopter and aircraft control may also become important.

Jacobus, Heidi↗
NASA NTRS1992

The EOS Data and Information System (EOSDIS)

The Earth Observing System (EOS) is the centerpiece of NASA's Mission to Planet Earth initiative. It is a pivotal part of the U.S. Global Change Research Program and hence of the international effort to understand global change and the increasing demands of human activity. EOS consists of a space-based observing system, a Data and Information System (EOSDIS) and a scientific research program. The space component consists of two series of polar-orbiting spacecraft, the first scheduled for launch in 1998, that will collect data for 15 years. EOS is completing its conceptual design phase and is preparing to enter the design phase with the selection and construction of the instruments for the first platform. EOSDIS will allow researchers to quickly and easily access data about the Earth system. Development of EOSDIS has already begun; it will support research and analysis with existing data. Geophysical and biological products will be created from the satellite data to be used to a broad range of the scientific community. NASA has also committed to providing smaller missions - called Earth Probes - dedicated to near-term observations of specific Earth processes. The scientific research program was initiated in 1990, with funding for 28 interdisciplinary teams, to begin development of models that will use EOS data and define the data requirements from the instruments, nine facility instruments and their science teams, 23 instrument investigations and definition studies for a synthetic-aperture radar.

Dozier, J.↗
NASA NTRS1989

Super Smooth Optics for Extra-Solar Planet Detection

The goal of imaging planets around the nearby stars has important scientific significance but requires the use of advanced methods of controlling diffracted and scattered light. Over the last three years we have undertaken a study of coronagraphic methods of controlling diffracted light and of figuring hyper-contrast optics. Progress in these two general areas have led to a proposed space-based, 1.9 meter diameter coronagraphic telescope designed specifically for very high performance in the imaging of faint objects near bright sources. This instrument, called the Circumstellar Imaging Telescope (CIT), relies on a new high efficiency coronagraph design and the careful control of scattered light by extremely smooth optics. The high efficiency coronagraph uses focal plane apodization in order to concentrate diffracted light more efficiently in the pupil. This allows convenient removal of the diffracted light by masking off parts of the telescope pupil while not sacrificing the center of the field. Reductions of diffracted light by factors exceeding 1000 are not only possible but are required in order to detect extra-solar planets. Laboratory experiments with this new design have confirmed the theoretical diffraction reductions to the limits of the optics used (factors of about 300) . The extremely high efficiency of this coronagraph puts strong constraints on the narrow angle scattered light due to figure errors in the telescope mirror. Since planets orbiting nearby stars are expected at angular distances of about 1 arcsecond, it is in this small angular range in which scattering must be controlled. The figure errors responsible for scattering in this range come from mid-spatial frequencies corresponding to correlation lengths of about 10 cm on the primary mirror. A primary mirror about 15 times smoother than the Hubble Space Telescope mirror is required for the CIT. Laboratory experiments indicate that small test mirrors can be fabricated with existing technology which come within a factor of two of this requirement.

Terrile, Richard J.↗
NASA NTRS1989

Cryogenics for Space Observatories: Technology, Requirements, Issues

The ability to provide cooling at cryogenic temperatures is a critical enabling technology for many of the next generation of space-based observatories and instruments. This report discusses the state of cryogenics technology and identifies and categorizes the various methods of cooling.

Schember, Helene↗
NASA NTRS1986

FASAC Technical Assessment Report: Soviet Space Science Research

This report is the work of a panel of eight US scientists who surveyed and assessed Soviet research in the spare sciences. All of the panelists were very familiar with Soviet research through their knowledge of the published scientific literature and personal contacts with Soviet and other foreign colleagues. In addition, all of the panelists reviewed considerable additional open literature--scientific, and popular, including news releases. The specific disciplines of Soviet space science research examined in detail for the report were: solar-terrestrial research, lunar and planetary research, space astronomy and astrophysics, and, life sciences. The Soviet Union has in the past carried out an ambitious program in lunar exploration and, more recently, in studies of the inner planets, Mars and especially Venus. The Soviets have provided scientific data about the latter planet which has been crucial for studies of the planet's evolution. Future programs envision an encounter with Halley's Comet, in March 1986, and missions to Mars and asteroids. The Soviet programs in the life sciences and solar-terrestrial research have been long-lasting and systematically pursued. Much of the ground-based and space-based research in these two disciplines appears to be motivated by the requirement to establish long-term human habitation in near-Earth space. The Soviet contributions to new discoveries and understanding in observational space astronomy and astrophysics have been few. This is in significant contrast to the very excellent theoretical work contributed by Soviet scientists in this discipline.

Lanzerotti, L. J.↗
NASA NTRS1981

Yacht Race Monitoring

Observer Single-handed Transatlantic Race (OSTAR) participants were aided by a French-American space-based monitoring system which reported the yacht's positions throughout the race, and also served as an emergency locator service. Originating from NASA's Nimbus 6 Satellite, use of this system, called ARGOS made the OSTAR competition the most accurately reported sea race ever conducted. Each boat carried a portable transmitter allowing 88 new sources of oceanographic data available during the race.

Source record↗
NASA NTRS1988

Physical considerations relevant to HZE-particle transport in matter

High-energy, highly charged (HZE) heavy nuclei may seem at first sight to be an exotic type of radiation, only remotely connected with nuclear power generation. On closer examination it becomes evident that heavy-ion accelerators are being seriously considered for driving inertial confinement fusion reactors, and high-energy heavy nuclei in the cosmic radiation are likely to place significant constraints on satellite power system deployment and space-based power generation. The use of beams of heavy nuclei in an increasing number of current applications, as well as their importance for the development of the state of the art of the future, makes it necessary to develop at the same time a good understanding of their transport through matter.

NASA Program Biomedical Research↗
NASA NTRS1990

Binding of isolated plant lectin by rhizobia during episodes of reduced gravity obtained by parabolic flight

Development of a legume root nodule is a complex process culminating in a plant/bacterial symbiosis possessing the capacity for biological dinitrogen fixation. Formation of root nodules is initiated by the binding and stabilization of rhizobia to plant root hairs, mediated in part by a receptor/ligand recognition system composed of lectins on the plant root surface and lectin-binding sites on the rhizobial cell surface. The dinitrogen fixation activity of these root nodules may be an important feature of enclosed, space-based life support systems, and may provide an ecological method to recycle nitrogen for amino acid production. However, the effects on nodule development of varied gravitational fields, or of root nutrient delivery hardware, remain unknown. We have investigated the effects of microgravity on root nodule formation, with preliminary experiments focused upon the receptor/ligand component. Microgravity, obtained during parabolic flight aboard NASA 930, has no apparent effect on the binding of purified lectin to rhizobia, a result that will facilitate forthcoming experiments using intact root tissues.

manned↗
NASA NTRS1991

Waste treatment integration in space

The circumstances and criteria for space-based waste treatment bioregenerative life-support systems differ in many ways from those needed in terrestrial applications. In fact, the term "waste" may not even be appropriate in the context of nearly closed, cycling, ecosystems such as those under consideration. Because of these constraints there is a need for innovative approaches to the problem of "materials recycling". Hybrid physico-chemico-biological systems offer advantages over both strictly physico-chemico or biological approaches that would be beneficial to material recycling. To effectively emulate terrestrial cycling, the use of various microbial consortia ("assemblies of interdependent microbes") should be seriously considered for the biological components of such systems. This paper will examine the use of consortia in the context of a hybrid-system for materials recycling in space.

Waste Management/methods↗
NASA NTRS1990

Reproduction in the space environment: Part II. Concerns for human reproduction

Long-duration space flight and eventual colonization of our solar system will require successful control of reproductive function and a thorough understanding of factors unique to space flight and their impact on gynecologic and obstetric parameters. Part II of this paper examines the specific environmental factors associated with space flight and the implications for human reproduction. Space environmental hazards discussed include radiation, alteration in atmospheric pressure and breathing gas partial pressures, prolonged toxicological exposure, and microgravity. The effects of countermeasures necessary to reduce cardiovascular deconditioning, calcium loss, muscle wasting, and neurovestibular problems are also considered. In addition, the impact of microgravity on male fertility and gamete quality is explored. Due to current constraints, human pregnancy is now contraindicated for space flight. However, a program to explore effective countermeasures to current constraints and develop the required health care delivery capability for extended-duration space flight is suggested. A program of Earth- and space-based research to provide further answers to reproductive questions is suggested.

Review, Tutorial↗
DOE OSTI2024

UZrCN Synthesis via Arc Melting - A Novel Synthesis Study

The next generation of nuclear reactors for both power production and space nuclear propulsion require fuel that is more durable, thermally stable, and more thermally conductive to support rapid heat transfer. High temperature gas reactors (HTGR), advanced gas reactors (AGR), and space-based nuclear thermal propulsion (NTP) are advanced reactor concepts that require a fuel type that can withstand high temperatures (1000-2900K) and flow of corrosive gas coolants such as helium, hydrogen, and carbon dioxide. One fuel with the potential to meet these demanding requirements is uranium-zirconium-carbonitride (UZrCN). UZrCN has many favorable fuel qualities compared to other eligible fuel forms such as uranium dioxide (UO2) and uranium mononitride (UN) that could support the aforementioned reactor concepts. UZrCN has an exceptionally high operating temperature and thermal conductivity which are highly desirable to improve reactor economics and safety. It far exceeds the properties of UO2 which is the most common fuel form in the United States. UZrCN also surpasses UN in terms of thermal conductivity and operating temperature by eliminating the dissociation problem UN has at 1700K. UZrCN could improve gas reactor performance and enable NTP technologies; however, it is an under-researched fuel that lacks rigorous scientific study. In recent efforts by the Idaho National Laboratory, a variety of novel methods to produce this fuel composition have been explored. One such method is via arc melting of uranium, zirconium, and carbon under a nitrogen atmosphere. Alloy fabrication using arc melting has been utilized for close to 150 years now and is well-understood as a method for rapid alloy prototyping. This process will be used to perform in-situ nitriding to form UZrCN.

36 MATERIALS SCIENCE↗
DOE OSTI2024

UZrCN Formation via Arc Melting – A Novel Synthesis Study

The next generation of nuclear reactors for both power production and space nuclear propulsion require fuel that is more durable, thermally stable, and more thermally conductive to support rapid heat transfer. High temperature gas reactors (HTGR), advanced gas reactors (AGR), and space-based nuclear thermal propulsion (NTP) are advanced reactor concepts that require a fuel type that can withstand high temperatures (1000-2900K) and flow of corrosive gas coolants such as helium, hydrogen, and carbon dioxide. One fuel with the potential to meet these demanding requirements is uranium-zirconium-carbonitride (UZrCN). UZrCN has many favorable fuel qualities compared to other eligible fuel forms such as uranium dioxide (UO2) and uranium mononitride (UN) that could support the aforementioned reactor concepts. UZrCN has an exceptionally high operating temperature and thermal conductivity which are highly desirable to improve reactor economics and safety. It far exceeds the properties of UO2 which is the most common fuel form in the United States. UZrCN also surpasses UN in terms of thermal conductivity and operating temperature by eliminating the dissociation problem UN has at 1700K. UZrCN could improve gas reactor performance and enable NTP technologies; however, it is an under-researched fuel that lacks rigorous scientific study. In recent efforts by the Idaho National Laboratory, a variety of novel methods to produce this fuel composition have been explored. One such method is via arc melting of uranium, zirconium, and carbon under a nitrogen atmosphere. Alloy fabrication using arc melting has been utilized for close to 150 years now and is well-understood as a method for rapid alloy prototyping. This process will be used to perform in-situ nitriding to form UZrCN.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Reliable Power for Remote Applications

Optical power beaming - using lasers to transmit energy across distances - could change how remote devices receive power. The National Laboratory of the Rockies (NLR) seeks partners to explore the next stage in long-distance power beaming for terrestrial and space-based applications.

14 SOLAR ENERGY↗
DOE OSTI2025

Comparisons of the v11.1 Orbiting Carbon Observatory‐2 (OCO‐2) X CO2 Measurements With GGG2020 TCCON

The Orbiting Carbon Observatory 2 (OCO-2) is NASA's first Earth observation satellite mission dedicated to studying the sources and sinks of carbon dioxide (CO 2 ) on a global scale. The observations of reflected sunlight are inverted in a retrieval algorithm to produce estimates of the dry air mole-fractions of CO 2 (X CO2 ). The OCO-2 Level 2 data release, version 11.1 (v11.1) retrievals from the Atmospheric Carbon Observations from Space (ACOS) algorithm, includes significant improvements in the X CO2 data product compared to older OCO-2 data versions. This work compares the v11.1 X CO2 from OCO-2 against X CO2 estimates collected from a global ground-based network known as the Total Carbon Column Observing Network (TCCON), OCO-2's primary validation source. The OCO-2 project provides a version of the Level 2 data product, called “lite” files that include calibrated and bias-corrected XCO2 values, accessible together with all OCO-2 data products through the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC). This work shows that OCO-2 X CO2 observations made between September 2014 and December 2023, after quality filtering and the application of an averaging kernel correction, agree well with coincident TCCON data for all OCO-2 observational modes of land (nadir, glint, target) and ocean (glint). The aggregated, bias-corrected, and quality-filtered absolute average bias values are less than or equal to 0.20 parts per million (ppm) globally for all OCO-2 observation modes, where the biases do not indicate a statistically significant time dependence. The land nadir/glint mode has the lowest bias value of −0.03 ± 0.85 ppm.

54 ENVIRONMENTAL SCIENCES↗