Search NASA⌕ Search

SEARCH · Search NASA

Results for “Statistical modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Hybrid geological modeling: Combining machine learning and multiple-point statistics

Accurately modeling and constructing a geologically realistic subsurface model remains an outstanding problem as the morphology controls the flow behaviors. Particularly, one of the pattern-based methods, namely cross-correlation based simulation, has been proved to be an effective way to reconstruct a realistic model, at both small and large scales. However, conditioning to point data in the large-scale problems is still a crucial issue in these algorithms, since there is always a trade-off between the quality of the realizations and the degree of point data reproduction. Specifically, it is not practical to build a training image (TI) which includes all the possibilities and variabilities. Therefore, finding a pattern that can represent the point data and, at the same time, preserving the connectivities is difficult. This leads to producing highly-connected realizations with a significant mismatch or poor models with a reasonable degree of point data reproduction. To accurately reproduce the densely distributed hard data, pixel-based methods can also produce some unrealistic artifacts around the hard data. In this paper, to overcome this challenge, however, we use pattern-based methods as they often produce more disconnected geobodies when dealing with dense hard data, and proposed a hybrid algorithm using the pattern-based methods and convolutional neural network (CNN). The trained CNN model is utilized to improve the quality of conditioning to point data for the original realizations generated by the pattern-based algorithm. As such, the mismatch locations are identified, and the same regions are used in the training of CNN to mimic the procedure through which a missing region can be filled. To evaluate the performance of the proposed hybrid algorithm, it is tested on cases with different dimensions and different numbers of facies. Then, the newly improved realizations are compared with the initial realizations generated by the pattern-based algorithm. The comparison is also conducted by the flow simulation test. And it indicates that the proposed hybrid algorithm can better reproduce the point data, while the connectivities are better preserved.

58 GEOSCIENCES↗

Role of break-up processes in the fusion of the {sup 12}C+ {sup 52}Cr system

We present the results and analysis of our investigation of the role of break-up processes on the fusion of a {sup 12}C{sup 6+} beam with a {sup 52}Cr target near, at, and above the Coulomb barrier. In this experiment the excitation functions of evaporation residues produced via ({sup 12}C, 2n), ({sup 12}C, pxn), ({sup 12}C, {alpha}xn), and ({sup 12}C, {alpha}pxn) channels in a {sup 12}C + {sup 52}Cr reaction were measured at several beam energies ranging from {approx_equal}51 to 87 MeV by employing the recoil catcher technique followed by off-line {gamma}-ray spectrometry. The measured excitation functions were compared with theoretical values obtained using the pace4 statistical model code. Further, for a ({sup 12}C, p2n) channel the measured excitation function was compared with the predictions of the alice-91 code, which was chosen as it takes into account pre-equilibrium emissions. For non-{alpha}-emitting channels, the experimentally measured excitation functions--after correcting them for possible contributions from higher charge isobaric precursor decays--were, in general, found to be in good agreement with theoretical predictions. However, for {alpha}-emitting channels, the measured excitation functions had significantly more production cross sections than what pace4 predicted. This enhancement may be attributed to incomplete fusion processes. An attempt was made to estimate the incomplete fusion fraction in order to compare the relative importance of complete and incomplete fusion processes. The incomplete fusion fraction was found to be sensitive to the projectile energy and mass asymmetry of the entrance channel. We also discuss the results in terms of the impact of the frozen {alpha}-cluster structure of the {sup 12}C isotope on various fusion reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Machine Learning Approaches for Predicting Radiation Therapy Outcomes: A Clinician's Perspective

Radiation oncology has always been deeply rooted in modeling, from the early days of isoeffect curves to the contemporary Quantitative Analysis of Normal Tissue Effects in the Clinic (QUANTEC) initiative. In recent years, medical modeling for both prognostic and therapeutic purposes has exploded thanks to increasing availability of electronic data and genomics. One promising direction that medical modeling is moving toward is adopting the same machine learning methods used by companies such as Google and Facebook to combat disease. Broadly defined, machine learning is a branch of computer science that deals with making predictions from complex data through statistical models. These methods serve to uncover patterns in data and are actively used in areas such as speech recognition, handwriting recognition, face recognition, “spam” filtering (junk email), and targeted advertising. Although multiple radiation oncology research groups have shown the value of applied machine learning (ML), clinical adoption has been slow due to the high barrier to understanding these complex models by clinicians. Here, we present a review of the use of ML to predict radiation therapy outcomes from the clinician's point of view with the hope that it lowers the “barrier to entry” for those without formal training in ML. We begin by describing 7 principles that one should consider when evaluating (or creating) an ML model in radiation oncology. We next introduce 3 popular ML methods—logistic regression (LR), support vector machine (SVM), and artificial neural network (ANN)—and critique 3 seminal papers in the context of these principles. Although current studies are in exploratory stages, the overall methodology has progressively matured, and the field is ready for larger-scale further investigation.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Water retention and gas relative permeability of two industrial concretes

This experimental study aims at identifying the water retention properties of two industrial concretes to be used for long term underground nuclear waste storage structures. Together with water retention, gas transfer properties are identified at varying water saturation level, i.e. relative gas permeability is assessed directly as a function of water saturation level S{sub w}. The influence of the initial de-sorption path and of the subsequent re-saturation are analysed both in terms of water retention and gas transfer properties. Also, the influence of concrete microstructure upon water retention and relative gas permeability is assessed, using porosity measurements, analysis of the BET theory from water retention properties, and MIP. Finally, a single relative gas permeability curve is proposed for each concrete, based on Van Genuchten-Mualem's statistical model, to be used for continuous modelling approaches of concrete structures, both during drying and imbibition.

36 MATERIALS SCIENCE↗

Reactions involving loosely bound cluster nuclei: Heavy ions and new technologies

Experimental results on excitation functions for complete-fusion and transfer reactions in the interaction of {sup 6}He and {sup 6,8,9}Li nuclei with various target nuclei are presented. Data on fusion-reaction cross sections in the case of {sup 6}He differ strongly from the predictions of the statistical model. A strong enhancement of the cross section at barrier energies is observed for this reaction channel. Also, an increase in the cross sections for neutron-transfer reactions (in the case of {sup 6}He and {sup 8,9}Li beams) and deuteron-transfer reactions (in the case of {sup 6}Li) is observed in the deep-subbarrier energy region. The results are discussed from the point of view of the effect of the cluster structure of nuclei on the probability of interaction at barrier energies. The results of employing heavy-ion beams in new technologies are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Calculating system reliability with SRFYDO

SRFYDO is a process for estimating reliability of complex systems. Using information from all applicable sources, including full-system (flight) data, component test data, and expert (engineering) judgment, SRFYDO produces reliability estimates and predictions. It is appropriate for series systems with possibly several versions of the system which share some common components. It models reliability as a function of age and up to 2 other lifecycle (usage) covariates. Initial output from its Exploratory Data Analysis mode consists of plots and numerical summaries so that the user can check data entry and model assumptions, and help determine a final form for the system model. The System Reliability mode runs a complete reliability calculation using Bayesian methodology. This mode produces results that estimate reliability at the component, sub-system, and system level. The results include estimates of uncertainty, and can predict reliability at some not-too-distant time in the future. This paper presents an overview of the underlying statistical model for the analysis, discusses model assumptions, and demonstrates usage of SRFYDO.

97 MATHEMATICS AND COMPUTING↗

A Comparison of Infectious Disease Forecasting Methods across Locations, Diseases, and Time

Accurate infectious disease forecasting can inform efforts to prevent outbreaks and mitigate adverse impacts. This study compares the performance of statistical, machine learning (ML), and deep learning (DL) approaches in forecasting infectious disease incidences across different countries and time intervals. We forecasted three diverse diseases: campylobacteriosis, typhoid, and Q-fever, using a wide variety of features (n = 46) from public datasets, e.g., landscape, climate, and socioeconomic factors. We compared autoregressive statistical models to two tree-based ML models (extreme gradient boosted trees [XGB] and random forest [RF]) and two DL models (multi-layer perceptron and encoder–decoder model). The disease models were trained on data from seven different countries at the region-level between 2009–2017. Forecasting performance of all models was assessed using mean absolute error, root mean square error, and Poisson deviance across Australia, Israel, and the United States for the months of January through August of 2018. The overall model results were compared across diseases as well as various data splits, including country, regions with highest and lowest cases, and the forecasted months out (i.e., nowcasting, short-term, and long-term forecasting). Overall, the XGB models performed the best for all diseases and, in general, tree-based ML models performed the best when looking at data splits. There were a few instances where the statistical or DL models had minutely smaller error metrics for specific subsets of typhoid, which is a disease with very low case counts. Feature importance per disease was measured by using four tree-based ML models (i.e., XGB and RF with and without region name as a feature). The most important feature groups included previous case counts, region name, population counts and density, mortality causes of neonatal to under 5 years of age, sanitation factors, and elevation. This study demonstrates the power of ML approaches to incorporate a wide range of factors to forecast various diseases, regardless of location, more accurately than traditional statistical approaches.

59 BASIC BIOLOGICAL SCIENCES↗

Thermal neutron capture cross-section to {sup 113}Cd isomer for the study of s-process origin of {sup 115}Sn

The astrophysical origin of a p-nucleus {sup 115}Sn has remained still an open question. The nucleus {sup 115}Sn may be produced by a weak branch of the s-process through a beta-unstable isomer in {sup 113}Cd. However, a neutron capture cross-section to this isomer has not been measured with high accuracy at any energy. A neutron capture cross-section for the {sup 112}Cd(n,gamma){sup 113}Cd{sup m} reaction has been measured with neutrons provided from a nuclear reactor. The nucleus {sup 115}Sn may be produced by a nucleosynthesis flow through {sup 113}Cd{sup m} in the s-process. We have obtained the thermal neutron capture cross-section of 0.028+-0.009[b] and the resonance integral of 1.1+-0.3[b] using a cadmium difference method. The cross-section ratio of the isomer to the ground state has been calculated as a function of the incident neutron energy, E, by using a statistical model. The calculated ratios are almost constant over a wide range of E<100 keV. We have evaluated the s-process contribution to the solar abundance of {sup 115}Sn using the classical steady-flow model. This calculated result has shown that the production through {sup 113}Cd{sup m} may be minor contribution to {sup 115}Sn.

79 ASTRONOMY AND ASTROPHYSICS↗

NEUTRON CAPTURE CROSS SECTION TO {sup 113}Cd ISOMER AND s-PROCESS CONTRIBUTION TO RARE p-NUCLIDE {sup 115}Sn

A neutron capture cross section for the {sup 112}Cd(n, gamma){sup 113}Cd{sup m} reaction has been measured with neutrons provided from a nuclear reactor in order to study the astrophysical origin of a rare p-process isotope {sup 115}Sn, which may be produced by a nucleosynthesis flow through {sup 113}Cd{sup m} in the s-process. We have obtained the thermal neutron capture cross section of 0.028 +- 0.009 [b] and the resonance integral of 1.1 +- 0.3 [b] using a cadmium difference method. The cross section ratio of the isomer to the ground state has been calculated as a function of the incident neutron energy, E, by using a statistical model. The calculated ratios are almost constant over a wide range of E < 100 keV. We have evaluated the s-process contribution to the solar abundance of {sup 115}Sn using the classical steady-flow model with various astrophysical parameters. This calculated result has shown that the production through {sup 113}Cd{sup m} may give minor contribution to {sup 115}Sn.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Photoneutron cross sections for {sup 96}Zr: A systematic experimental study of photoneutron and radiative neutron capture cross sections for zirconium isotopes

Photoneutron cross sections were measured for {sup 96}Zr near neutron threshold with quasimonochromatic laser-Compton-scattering {gamma}-ray beams. A systematic analysis of photoneutron and radiative neutron capture data for zirconium isotopes within the statistical model calculation leads to a unified picture of low-energy {gamma}-ray strengths for zirconium isotopes that is described by the HFB + QRPA model of E1 strength supplemented with an extra {gamma} strength attributed to a giant M1 resonance. Results of the systematic analysis including radiative neutron capture cross sections for radioactive {sup 95}Zr and {sup 93}Zr nuclei are presented.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Statistical description of complex nuclear phases in supernovae and proto-neutron stars

We develop a phenomenological statistical model for dilute star matter at finite temperature, in which free nucleons are treated within a mean-field approximation and nuclei are considered to form a loosely interacting cluster gas. Its domain of applicability, that is, baryonic densities ranging from about {rho}>10{sup 8} g/cm{sup 3} to normal nuclear density, temperatures between 1 and 20 MeV, and proton fractions between 0.5 and 0, makes it suitable for the description of baryonic matter produced in supernovae explosions and proto-neutron stars. The first finding is that, contrary to the common belief, the crust-core transition is not first order, and for all subsaturation densities matter can be viewed as a continuous fluid mixture between free nucleons and massive nuclei. As a consequence, the equations of state and the associated observables do not present any discontinuity over the whole thermodynamic range. We further investigate the nuclear matter composition over a wide range of densities and temperatures. At high density and temperature our model accounts for a much larger mass fraction bound in medium nuclei with respect to traditional approaches as Lattimer-Swesty, with sizable consequences on the thermodynamic quantities. The equations of state agree well with the presently used EOS only at low temperatures and in the homogeneous matter phase, while important differences are present in the crust-core transition region. The correlation among the composition of baryonic matter and neutrino opacity is finally discussed, and we show that the two problems can be effectively decoupled.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Critical temperature for the nuclear liquid-gas phase transition (from multifragmentation and fission)

Critical temperature T{sub c} for the nuclear liquid-gas phase transition is estimated from both the multifragmentation and fission data. In the first case, the critical temperature is obtained by analysis of the intermediate-mass-fragment yields in p(8.1 GeV) + Au collisions within the statistical model of multifragmentation. In the second case, the experimental fission probability for excited {sup 188}Os is compared with the calculated one with T{sub c} as a free parameter. It is concluded for both cases that the critical temperature is higher than 15 MeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electron percolation in realistic models of carbon nanotube networks

The influence of penetrable and curved carbon nanotubes (CNT) on the charge percolation in three-dimensional disordered CNT networks have been studied with Monte-Carlo simulations. By considering carbon nanotubes as solid objects but where the overlap between their electron cloud can be controlled, we observed that the structural characteristics of networks containing lower aspect ratio CNT are highly sensitive to the degree of penetration between crossed nanotubes. Following our efficient strategy to displace CNT to different positions to create more realistic statistical models, we conclude that the connectivity between objects increases with the hard-core/soft-shell radii ratio. In contrast, the presence of curved CNT in the random networks leads to an increasing percolation threshold and to a decreasing electrical conductivity at saturation. The waviness of CNT decreases the effective distance between the nanotube extremities, hence reducing their connectivity and degrading their electrical properties. We present the results of our simulation in terms of thickness of the CNT network from which simple structural parameters such as the volume fraction or the carbon nanotube density can be accurately evaluated with our more realistic models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluating Carbon Extremes in a Coupled Climate-Carbon Cycle Simulation

Gross primary production (GPP) measures the photosynthetic update of carbon by terrestrial ecosystems. Accurately quantifying and simulating GPP and its extremes remains a challenge in global carbon cycle sciences. Here, we evaluate GPP extremes in a coupled biogeochemistry (BGC) simulation by the Department of Energy's Energy Exascale Earth System Model (E3SMv1.1) using the Generalized Extreme Value (GEV) distribution statistical model. The simulation is evaluated against the Global Bio-Atmosphere Flux (GBAF) data. Temporal trends and ENSO dependence are also investigated by using GEV models where time and the Niño3.4 index are introduced as linear covariates. The E3SMv1.1 model simulation generally predicts stronger negative and positive GPP extremes as compared to GBAF data. It also tends to simulate stronger temporal trends of GPP extremes than GBAF data. While negative GPP extreme trends are not significant in either E3SM or GBAF, positive GPP trends are statistically significant over several regions only for the E3SMv1.1 model simulation. ENSO dependence is generally stronger in the E3SMv1.1 model simulation, but ENSO dependence is found not to be significant for the time period analyzed (1980-2006) to match GBAF data. For the longer simulation period of 1900-2006, ENSO dependence is found to be statistically significant over Amazon, the maritime continent and Northern Australia for both negative and positive extremes.

Xu, Min↗

Population of isomeric states in fusion and transfer reactions in beams of loosely bound nuclei near the Coulomb barrier

The influence of the mechanisms of nuclear reactions on the population of {sup 195m}Hg and {sup 197m}Hg(7/2{sup −}), {sup 198m}Tl and {sup 196m}Tl(7{sup +}), and {sup 196m}Au and {sub 198m}Au(12{sup −}) isomeric nuclear states obtained in reactions induced by beams of {sup 3}He, {sup 6}Li, and {sup 6}He weakly bound nuclei is studied. The behavior of excitation functions and high values of isomeric ratios (δ{sub m}/δ{sub g}) for products of nuclear reactions proceeding through a compound nucleus and involving neutron evaporation are explained within statistical models. Reactions in which the emission of charged particles occurs have various isomeric ratios depending on the reaction type. The isomeric ratio is lower in direct transfer reactions involving charged-particle emission than in reactions where the evaporation of charged particles occurs. Reactions accompanied by neutron transfer usually have a lower isomeric ratio, which behaves differently for different direct-reaction types (stripping versus pickup reactions)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

J/{psi} production and elliptic flow in relativistic heavy-ion collisions

Using the two-component model for charmonium production, which includes contributions from both initial hard nucleon-nucleon scattering and from regeneration in the quark-gluon plasma, we study the nuclear modification factor R{sub AA} and elliptic flow v{sub 2} of J/{psi} in relativistic heavy-ion collisions. For the expansion dynamics of produced hot, dense matter, we introduce a schematic fireball model with its transverse acceleration determined from the pressure gradient inside the fireball and azimuthally anisotropic expansion parametrized to reproduce measured v{sub 2} of light hadrons. We assume that light hadrons freeze out at the temperature of 120 MeV while charmonia freeze out at 160 MeV, similar to the kinetic and chemical freeze-out temperatures in the statistical model, respectively. For the properties of charmonia in the quark-gluon plasma, we use the screening mass between their charm and anticharm quarks and their dissociation cross sections given by the perturbative quantum chromodynamical (pQCD) calculations in the leading order and up to the next-to-leading order, respectively. For the relaxation time of charm and anticharm quarks in the quark-gluon plasma, we also use the one calculated in the leading-order pQCD. Modeling the effect of higher-order corrections in pQCD by introducing multiplicative factors to the dissociation cross sections of charmonia and the elastic scattering cross sections of charm and anticharm quarks, we find that this effect is small for the R{sub AA} of J/{psi} as they suppress the number of initially produced J/{psi} but enhance the number of regenerated ones. The higher-order corrections increase, however, the v{sub 2} of J/{psi}. Our results suggest that the v{sub 2} of J/{psi} can play an important role in discriminating between J/{psi} production from initial hard collisions and from regeneration in the quark-gluon plasma.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Cross sections for {alpha}-particle induced reactions on {sup 115,116}Sn around the Coulomb barrier

The cross sections of the {sup 115}Sn({alpha},{gamma}){sup 119}Te, {sup 115}Sn({alpha},n){sup 118}Te, and {sup 116}Sn({alpha},n){sup 119}Te reactions (both on ground and isomeric states) have been measured at effective center-of-mass energies from 9.3 to 14.8 MeV. During a first experiment, enriched self-supporting {sup 115}Sn (51.2%) + {sup 116}Sn (24.4%) foils were bombarded with an {alpha} beam delivered by the Bucharest IFIN-HH Tandem Accelerator. In a second experiment, a highly enriched {sup 116}Sn target was irradiated in order to disentangle the experimental cross section contributions due to {sup 115}Sn({alpha},{gamma}){sup 119}Te and {sup 115}Sn({alpha},n){sup 118}Te reactions obtained in the first measurement. The beam-induced activity was measured with two large volume HPGe detectors in close geometry. The experimental results were compared with theoretical predictions obtained in the framework of the statistical model.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A Gaussian process-based approach for handling uncertainty in vehicle dynamics simulation.

Advances in vehicle modeling and simulation in recent years have led to designs that are safer, easier to handle, and less sensitive to external factors. Yet, the potential of simulation is adversely impacted by its limited ability to predict vehicle dynamics in the presence of uncertainty. A commonly occurring source of uncertainty in vehicle dynamics is the road-tire friction interaction, typically represented through a spatially distributed stochastic friction coefficient. The importance of its variation becomes apparent on roads with ice patches, where if the stochastic attributes of the friction coefficient are correctly factored into real time dynamics simulation, robust control strategies could be designed to improve transportation safety. This work concentrates on correctly accounting in the nonlinear dynamics of a car model for the inherent uncertainty in friction coefficient distribution at the road/tire interface. The outcome of this effort is the ability to quantify the effect of input uncertainty on a vehicle's trajectory and the associated escalation of risk in driving. By using a space-dependent Gaussian process, the statistical representation of the friction coefficient allows for consistent space dependence of randomness. The approach proposed allows for the incorporation of noise in the observed data and a nonzero mean for inhomogeneous distribution of the friction coefficient. Based on the statistical model considered, consistent friction coefficient sample distributions are generated over large spatial domains of interest. These samples are subsequently used to compute and characterize the statistics associated with the dynamics of a nonlinear vehicle model. The information concerning the state of the road and thus the friction coefficient is assumed available (measured) at a limited number of points by some sensing device that has a relatively homogeneous noise field (satellite picture or ground sensors, for instance). The methodology proposed can be modified to incorporate information that is sensed by each individual car as it advances along its trajectory.

33 ADVANCED PROPULSION SYSTEMS↗