Search NASA⌕ Search

SEARCH · Search NASA

Results for “Youngs Modulus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

A phononic crystal strip based on silicon for support tether applications in silicon-based MEMS resonators and effects of temperature and dopant on its band gap characteristics

Phononic crystals (PnCs) and n-type doped silicon technique have been widely employed in silicon-based MEMS resonators to obtain high quality factor (Q) as well as temperature-induced frequency stability. For the PnCs, their band gaps play an important role in the acoustic wave propagation. Also, the temperature and dopant doped into silicon can cause the change in its material properties such as elastic constants, Young’s modulus. Therefore, in order to design the simultaneous high Q and frequency stability silicon-based MEMS resonators by two these techniques, a careful design should study effects of temperature and dopant on the band gap characteristics to examine the acoustic wave propagation in the PnC. Based on these, this paper presents (1) a proposed silicon-based PnC strip structure for support tether applications in low frequency silicon-based MEMS resonators, (2) influences of temperature and dopant on band gap characteristics of the PnC strips. The simulation results show that the largest band gap can achieve up to 33.56 at 57.59 MHz and increase 1280.13 % (also increase 131.89 % for ratio of the widest gaps) compared with the counterpart without hole. The band gap properties of the PnC strips is insignificantly effected by temperature and electron doping concentration. Also, the quality factor of two designed length extensional mode MEMS resonators with proposed PnC strip based support tethers is up to 1084.59% and 43846.36% over the same resonators with PnC strip without hole and circled corners, respectively. This theoretical study uses the finite element analysis in COMSOL Multiphysics and MATLAB softwares as simulation tools. This findings provides a background in combination of PnC and dopant techniques for high performance silicon-based MEMS resonators as well as PnC-based MEMS devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Three-dimensional ionic conduction in the strained electrolytes of solid oxide fuel cells

Flexible power sources including fuel cells and batteries are the key to realizing flexible electronic devices with pronounced foldability. To understand the bending effects in these devices, theoretical analysis on three-dimensional (3-D) lattice bending is necessary. In this report, we derive a 3-D analytical model to analyze the effects of electrolyte crystal bending on ionic conductivity in flexible solid-state batteries/fuel cells. By employing solid oxide fuel cells as a materials' platform, the intrinsic parameters of bent electrolyte materials, including lattice constant, Young's modulus, and Poisson ratio, are evaluated. Our work facilitates the rational design of highly efficient flexible electrolytes for high-performance flexible device applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Impact of layer and substrate properties on the surface acoustic wave velocity in scandium doped aluminum nitride based SAW devices on sapphire

This paper investigates the performance of surface acoustic wave (SAW) devices consisting of reactively sputter deposited scandium doped aluminum nitride (Sc{sub x}Al{sub 1-x}N) thin films as piezoelectric layers on sapphire substrates for wireless sensor or for RF-MEMS applications. To investigate the influence of piezoelectric film thickness on the device properties, samples with thickness ranging from 500 nm up to 3000 nm are fabricated. S{sub 21} measurements and simulations demonstrate that the phase velocity is predominantly influenced by the mass density of the electrode material rather than by the thickness of the piezoelectric film. Additionally, the wave propagation direction is varied by rotating the interdigital transducer structures with respect to the crystal orientation of the substrate. The phase velocity is about 2.5% higher for a-direction compared to m-direction of the sapphire substrate, which is in excellent agreement with the difference in the anisotropic Young's modulus of the substrate corresponding to these directions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2017

Effect of wheel speed on magnetic and mechanical properties of melt spun Fe-6.5 wt.% Si high silicon steel

Here, Fe-Si electric steel is the most widely used soft magnetic material in electric machines and transformers. Increasing the silicon content from 3.2 wt.% to 6.5 wt.% brings about large improvement in the magnetic and electrical properties. However, 6.5 wt.% silicon steel is inherited with brittleness owing to the formation of B2 and D0 3 ordered phase. To obtain ductility in Fe-6.5wt.% silicon steel, the ordered phase has to be bypassed with methods like rapid cooling. In present paper, the effect of cooling rate on magnetic and mechanical properties of Fe-6.5wt.% silicon steel is studied by tuning the wheel speed during melt spinning process. The cooling rate significantly alters the ordering and microstructure, and thus the mechanical and magnetic properties. X-ray diffraction data shows that D0 3 ordering was fully suppressed at high wheel speeds but starts to nucleate at 10m/s and below, which correlates with the increase of Young’s modulus towards low wheel speeds as tested by nanoindentation. The grain sizes of the ribbons on the wheel side decrease with increasing wheel speeds, ranging from ~100 μm at 1m/s to ~8 μm at 30m/s, which lead to changes in coercivity.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Experimental and theoretical studies on the elasticity of tungsten to 13 GPa

Compressional (V_P) and shear wave (V_S) velocities of polycrystalline tungsten have been measured up to ~13 GPa at room temperature using ultrasonic interferometry in a multi-anvil apparatus. Using finite strain equation of state approaches, the elastic bulk and shear moduli and their pressure dependences are derived yielding $K_{S0}$= 325.9 ± 4.8 GPa, $G_0$ =164.1±2.5 GPa, $K^{'}_{S0}$ =3.65 ± 0.05 and $G^{'}_0$ =1.28 ± 0.02. On the basis of the current experimental data, the high-pressure behavior of Young’s modulus, Poisson’s ratio and ductility/brittleness for tungsten are also investigated. Complementary to the experimental data, the single crystal elastic constants, as well as the elastic anisotropy of tungsten are computed using density functional theory (DFT). The Voigt-Reuss-Hill average of the bulk and shear moduli calculated using the single crystal elastic constants from DFT are found comparable to the current experimental results within about 5%. Here, the present study offers a dataset for the elasticity of polycrystalline bcc tungsten to a maximum pressure more than 25-fold higher than other previous ultrasonic studies, which can further our understanding about the elastic, mechanical and electronic properties of tungsten under extreme conditions as well as thermodynamic modelling of its alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Characterization of mechanical properties of thin-film Li-ion battery electrodes from laser excitation and measurements of zero group velocity resonances

The mechanical properties of thin-film Li-ion battery electrodes are controlled by the microstructure of the constituent materials. In this work, a noncontact and nondestructive measurement of the mechanical properties of electrode films is performed by measurement of zero-group velocity (ZGV) resonances. Theoretical models are used to quantify the sensitivity of the ZGV resonances to changes in mechanical properties. The ZGV Lamb modes of a solid bilayer consisting of a thin metallic layer and a thin compliant coating layer are shown to be dependent on Young’s moduli, thicknesses, densities, and Poisson’s ratios of the layers. Experimental ZGV resonances are excited using a pulsed infrared laser and detected using a laser interferometer. Commercial-grade battery films with different coating materials, densities, and thicknesses are measured. Young’s moduli of the battery electrode layers are estimated using the combination of a theoretical model and experimental results. The effect of the calendering process on the battery materials is also investigated. Results suggest that Young’s modulus of the electrode coating increases drastically after the battery films are calendered. This technique can be used to quantitatively study the mechanical properties of Li-ion battery electrodes in order to improve overall battery performance.

Yao, Jing (ORCID:0000000209348842)↗
DOE OSTI2022

Effect of substrate temperature on sputter-deposited boron carbide films

Sputter deposition of B4C films with tailored physical properties remains a challenge. Here, we systematically study how substrate temperature influences the properties of B4C films deposited by direct current magnetron sputtering onto planar substrates held at temperatures in the range of 100-510°C. Results show that all films are amorphous stoichiometric B4C, with low O content of ~1 at. %. Films deposited onto substrates at 100°C exhibit high compressive residual stress and decreased mechanical properties. Therefore, for elevated substrate temperatures in the range of 180-510°C, film mass density, surface roughness, Young’s modulus, and hardness are weakly dependent on substrate temperature. However, in this temperature range, an increase in substrate temperature leads to larger residual compressive stress accompanied by a corresponding reduction in the concentration of nanoscale inhomogeneities. At least for the landing atom ballistics conditions studied here, a substrate temperature range of ~185-250°C is optimum for growing films with near-zero intrinsic residual stress. The overall weak substrate temperature dependence of film properties revealed in this work is favorable for the development of a robust deposition process, particularly for the case of deposition onto non-planar substrates where temperature control is often challenging.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A machine learning framework for elastic constants predictions in multi-principal element alloys

On the one hand, multi-principal element alloys (MPEAs) have created a paradigm shift in alloy design due to large compositional space, whereas on the other, they have presented enormous computational challenges for theory-based materials design, especially density functional theory (DFT), which is inherently computationally expensive even for traditional dilute alloys. In this paper, we present a machine learning framework, namely PREDICT (PRedict properties from Existing Database In Complex alloys Territory), that opens a pathway to predict elastic constants in large compositional space with little computational expense. The framework only relies on the DFT database of binary alloys and predicts Voigt–Reuss–Hill Young’s modulus, shear modulus, bulk modulus, elastic constants, and Poisson’s ratio in MPEAs. We show that the key descriptors of elastic constants are the A–B bond length and cohesive energy. The framework can predict elastic constants in hypothetical compositions as long as the constituent elements are present in the database, thereby enabling property exploration in multi-compositional systems. We illustrate predictions in a FCC Ni-Cu-Au-Pd-Pt system.

Linton, Nathan (ORCID:0000000315485613)↗
DOE OSTI2019

Measuring the elastic wave velocity in the lens of the eye as a function of intraocular pressure using optical coherent elastography

The dependence of the elastic properties of the eye lens on the intraocular pressure is investigated in porcine eyes ex vivo. To measure the stiffness of the lens, the method of dynamic optical coherent elastography is used, in which the propagation velocity of surface elastic waves in the lens is measured using phase-sensitive optical coherent tomography. Measurement data show an increase in Young’s modulus of the lens by ∼30% with an increase in intraocular pressure from 10 to 40 mm Hg. This result allows us to conclude that the effect of intraocular pressure on the rigidity of the lens is less significant than on the rigidity of other eye tissues, such as the cornea and sclera. The method of optical coherent elastography makes it possible to measure the elastic properties of the lens without removing it from the eyeball and has considerable potential for clinical use. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Fabric properties and electric efficiency limits of mechanical moisture extraction from fabrics

Residential clothes drying consume about 650 TBtu of primary energy per year in the United States, equivalent to 3% of primary residential energy consumption. There is a strong impetus to reduce the energy consumption of clothes dryers by both improving existing technology and developing alternatives that use fundamentally different drying mechanisms. Clothes drying technologies are broadly classified into either evaporative or mechanical drying. The focus of this paper is on mechanical drying, including vibrational, centrifugal, and press-based methods. In this work, the physical processes involved in these mechanical fabric drying processes were analyzed to develop general theories of mechanical cloth drying energy efficiency. Quantitative evaluation of the theories requires measured fabric properties. To accomplish this, a set of experiments was conducted on samples of a standard test fabric. The fabric was a cotton-polyester blend specified by the US Department of Energy to evaluate the standardized efficiency of all residential clothes dryers in the US. Mercury porosimetry experiments were conducted to determine the fabric pore size distribution, apparent density, and porosity. Elasticity experiments were conducted to determine the fabric’s Young’s modulus. Isostatic press experiments were conducted to establish a relationship between compression force and fabric moisture content. The data resulting from these experiments were combined with mathematical models developed in this work to calculate the theoretical maximum performance limits for mechanical drying of the standard fabric. The results of the analysis are used to make recommendations for the most promising technologies that offer the greatest potential energy savings for residential clothes drying.

36 MATERIALS SCIENCE↗
DOE OSTI2020

First-principles study on structural mechanical and thermodynamic properties of HfMoTaTiZr

This study calculates the phase diagram of HfMoTaTiZr using the TCHEA1 database in Thermo-Calc software. Furthermore, it also investigates the structural and mechanical properties of HfMoTaTiZr by applying first-principles calculations. The elastic and other mechanical properties such as Young’s modulus, pugh ratio, hardness, bulk modulus was derived and discussed. These parameters were found to be in good harmony with previously available experimental reports. Vickers hardness of HfMoTaTiZr predicted from the Tians model agrees with the available experimental result. This study also investigates the thermal coefficient of linear expansion and vibrational heat capacity of the HfMoTaTiZr using the Debye–Grüneisen theory.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Computational exploration of biomedical HfNbTaTiZr and Hf 0.5 Nb 0.5 Ta 0.5 Ti 1.5 Zr refractory high-entropy alloys

Refractory high entropy alloys (RHEAs) have been proven to be a potential candidate in the biomedical field due to their balanced mechanical properties and biocompatible composition. Recent experimental findings show that RHEAs like HfNbTaTiZr and Hf 0.5 Nb 0.5 Ta 0.5 Ti 1.5 Zr have good mechanical properties such as high polarization and wear resistance than others which establish them as potential materials for biomedical application. In this work, we performed first-principles density functional theory calculations on the mechanical and thermal properties of HfNbTaTiZr and Hf 0.5 Nb 0.5 Ta 0.5 Ti 1.5 Zr. The predicted lattice constant, density, Young's modulus, and Vickers hardness are consistent with the available experimental report, which verifies the accuracy of the applied model. The thermal coefficient of linear expansion of both RHEAs has been investigated by utilizing the Debye theory. The present methods could be applied to study other future RHEAs on exploration of their physical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Proton irradiated graphite grades for a long baseline neutrino facility experiment

In search of a low-Z pion production target for the Long Baseline Neutrino Facility (LBNF) of the Deep Underground Neutrino Experiment (DUNE) four graphite grades were irradiated with protons in the energy range of 140–180 MeV, to peak fluence of ~6.1×10 20 p/cm 2 and irradiation temperatures between 120–200 °C. The test array included POCO ZXF-5Q, Toyo-Tanso IG 430, Carbone-Lorraine 2020 and SGL R7650 grades of graphite. Irradiation was performed at the Brookhaven Linear Isotope Producer. Postirradiation analyses were performed with the objective of (a) comparing their response under the postulated irradiation conditions to guide a graphite grade selection for use as a pion target and (b) understanding changes in physical and mechanical properties as well as microstructure that occurred as a result of the achieved fluence and in particular at this low-temperature regime where pion graphite targets are expected to operate. A further goal of the postirradiation evaluation was to establish a proton-neutron correlation damage on graphite that will allow for the use of a wealth of available neutron-based damage data in proton-based studies and applications. Macroscopic postirradiation analyses as well as energy dispersive x-ray diffraction of 200 KeV x rays at the NSLS synchrotron of Brookhaven National Laboratory were employed. The macroscopic analyses revealed differences in the physical and strength properties of the four grades with behavior however under proton irradiation that qualitatively agrees with that reported for graphite under neutrons for the same low temperature regime and in particular the increase of thermal expansion, strength and Young’s modulus. The proton fluence level of ~10 20 cm -2 where strength reaches a maximum before it begins to decrease at higher fluences has been identified and it agrees with neutron-induced changes. X-ray diffraction analyses of the proton irradiated graphite revealed for the first time the similarity in microstructural graphite behavior to that under neutron irradiation and the agreement between the fluence threshold of ~5×10 20 cm -2 where the graphite lattice undergoes a dramatic change. The confirmed similarity in behavior and agreement in threshold fluences for proton and neutron irradiation effects on graphite reported for the first time in this study will enable the safe utilization of the wealth of neutron irradiation data on graphite that extends to much higher fluences and different temperature regimes by the proton accelerator community searching for multi-MW graphite targets.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Nanocrystalline strain glass TiNiPt and its superelastic behavior

TiNi-based shape-memory alloys are known to exhibit a strain glass state under certain conditions, generally in the presence of high-density defects such as excess solute atoms or alloying elements, dislocations, and nanoprecipitates. In this paper, we report a strain glass transition in a nanocrystalline Ti 50 Ni 35 Pt 15 alloy. The nanocrystalline strain glass state is achieved by a combined effect of high-density grain boundaries and high concentration doping of Pt atoms in the B2 matrix. The nanocrystalline Ti 50 Ni 35 Pt 15 strain glass alloy showed a large near-complete progressive superelasticity with a recovery strain of about 6% and a low apparent Young's modulus of about 30 GPa in a wide temperature range of over 200 °C. In situ synchrotron x-ray diffraction measurement showed that the strain glass B2 [B2(SG)] phase experienced B2(SG)→R→B19 transformation upon loading and B19→B2(SG) upon unloading. The findings of this study provide insight for the development of nanocrystalline strain glass shape-memory alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Different bonding type along each crystallographic axis: Computational study of poly($\textit{p}$-phenylene terephthalamide)

Poly($\textit{p}$-phenylene terephthalamide) (PPTA) exhibits van der Waals (vdW) bonding along its $\textit{a}$ axis, hydrogen bonding along its $\textit{b}$ axis, and covalent bonding along its $\textit{c}$ axis. In this work, we explore the structural and mechanical properties of PPTA using density functional theory with various functionals including LDA, PBE, PBE+rVV10L, SCAN, and SCAN+rVV10, compared with available experiments. The hierarchy of nonempirical semilocal functionals LDA, PBE, and SCAN (not fitted to any multicenter bonded system) includes differing amounts of intermediate-range vdW interaction. rVV10 is the long-range vdW correction. (rVV10L differs from rVV10 only in the value of a range parameter.) Among the tested functionals, SCAN shows the best performance for the lattice parameters of PPTA along the two crystal directions involving vdW or hydrogen-bond interaction. The equilibrium lattice constants obtained by SCAN and PBE+rVV10L are closest to experimental data, while SCAN+rVV10 slightly overbinds the system. We study the mechanical response of PPTA by applying strain along three lattice directions. Due to the inclusion of vdW interaction, SCAN, PBE+rVV10L, and SCAN+rVV10 all exhibit correct bonding strain-energy curves. On the contrary, PBE strongly underestimates the vdW interaction needed to resist uniaxial stretching along the $\textit{a}$ axis. The Young's modulus and yield strength of PPTA are computed and compared with previous results. The experimental values are much smaller than the computed ones, mainly due to the fact that the PPTA fiber samples used for measurements are mechanically weaker than the perfect molecular crystals considered in the simulations. Interestingly, when a compressive uniaxial stress of 25 Kbar is applied along the $\textit{b}$ axis, a structural phase transition, in which the hydrogen bonds reform along one diagonal of the $\textit{ab}$ rectangle, is predicted by SCAN.

36 MATERIALS SCIENCE↗
DOE OSTI2019

AlN/SiC MEMS for High-Temperature Applications

The creation of microelectromechanical systems (MEMS) that can operate through elevated temperatures would enable systems diagnostics and controls that are not possible with conventional-off-the-shelf components. The integration of silicon carbide (SiC) with aluminum nitride (AlN) has led to the fabrication of devices that can withstand elevated temperature anneals >935 °C. The results from a piezoelectric micromachined ultrasonic transducer (PMUT) and a microresonator are reported as demonstrations of the fabrication process. Testing the PMUT response before and after annealing at 935 °C led to a change in resonant frequency of less than 1%, which is attributable to a shift in film stress. The response of the microresonator was RF tested in situ up to 500 °C and showed no degradation in its electromechanical coupling coefficient. The resonant frequency decreased with temperature due to the temperature coefficient of Young's modulus, and the quality factor decreased with temperature and remained unrecoverable upon cooling. The degradation in the quality factor is suspected to be a result of oxidation of the titatium nitride (TiN) top electrode, which increases the resistivity and leads to an unrecoverable reduction in the quality factor. As a result, the robust piezoelectric response of AlN at these temperatures show that AlN is a very promising candidate for elevated temperature applications. [2019-0019]

42 ENGINEERING↗
DOE OSTI2024

Evaluation of Surface Crack Formation in Photovoltaic Backsheets Using Fragmentation and Finite Element Simulations

Backsheet cracking is among the most commonly observed degradation modes of photovoltaic modules in the field. Cracks can reduce the ability of backsheets to fulfill their functions, such as protection of the modules from the environment or electrical insulation. Here, this work presents an evaluation of the degradation and cracking propensity of two backsheets during accelerated IEC TS 62788-7-2 (International Electrotechnical Commission) aging under the A3 condition with a fragmentation test using a coextruded polyamide backsheet (AAA), and a laminated multilayer backsheet with a polyethylene terephthalate core and outer layer and ethylene vinyl acetate inner layer (PPE). Results show the surface embrittlement of the AAA outer layer during exposure. A longer time of exposure causes cracks to form at lower strains during stretching and creates deeper cracks. Accordingly, Young's modulus of the outer layer increases, as measured by cross-sectional nanoindentation. PPE exhibits cracking after exposure as well. While no similar increase of modulus or crack depth can be observed, the outer layer of PPE exhibits more obvious signs of erosion during exposure, including progressive morphological changes and thickness losses. A finite element model is developed to simulate surface crack formation, based on initially zero-thickness decohesion elements. Decohesion criteria define a critical stress, at which these elements grow, and cracks can begin to form. These criteria are obtained via parameter optimization by comparison between simulation and experiment. The model is used to interpret crack formation in both backsheets.

14 SOLAR ENERGY↗