Search NASA⌕ Search

SEARCH · Search NASA

Results for “base editing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

GMI-IPS: Python Processing Software for Aircraft Campaigns

NASA's Atmospheric Tomography Mission (ATom) seeks to understand the impact of anthropogenic air pollution on gases in the Earth's atmosphere. Four flight campaigns are being deployed on a seasonal basis to establish a continuous global-scale data set intended to improve the representation of chemically reactive gases in global atmospheric chemistry models. The Global Modeling Initiative (GMI), is creating chemical transport simulations on a global scale for each of the ATom flight campaigns. To meet the computational demands required to translate the GMI simulation data to grids associated with the flights from the ATom campaigns, the GMI ICARTT Processing Software (GMI-IPS) has been developed and is providing key functionality for data processing and analysis in this ongoing effort. The GMI-IPS is written in Python and provides computational kernels for data interpolation and visualization tasks on GMI simulation data. A key feature of the GMI-IPS, is its ability to read ICARTT files, a text-based file format for airborne instrument data, and extract the required flight information that defines regional and temporal grid parameters associated with an ATom flight. Perhaps most importantly, the GMI-IPS creates ICARTT files containing GMI simulated data, which are used in collaboration with ATom instrument teams and other modeling groups. The initial main task of the GMI-IPS is to interpolate GMI model data to the finer temporal resolution (1-10 seconds) of a given flight. The model data includes basic fields such as temperature and pressure, but the main focus of this effort is to provide species concentrations of chemical gases for ATom flights. The software, which uses parallel computation techniques for data intensive tasks, linearly interpolates each of the model fields to the time resolution of the flight. The temporally interpolated data is then saved to disk, and is used to create additional derived quantities. In order to translate the GMI model data to the spatial grid of the flight path as defined by the pressure, latitude, and longitude points at each flight time record, a weighted average is then calculated from the nearest neighbors in two dimensions (latitude, longitude). Using SciPya's Regular Grid Interpolator, interpolation functions are generated for the GMI model grid and the calculated weighted averages. The flight path points are then extracted from the ATom ICARTT instrument file, and are sent to the multi-dimensional interpolating functions to generate GMI field quantities along the spatial path of the flight. The interpolated field quantities are then written to a ICARTT data file, which is stored for further manipulation. The GMI-IPS is aware of a generic ATom ICARTT header format, containing basic information for all flight campaigns. The GMI-IPS includes logic to edit metadata for the derived field quantities, as well as modify the generic header data such as processing dates and associated instrument files. The ICARTT interpolated data is then appended to the modified header data, and the ICARTT processing is complete for the given flight and ready for collaboration. The output ICARTT data adheres to the ICARTT file format standards V1.1. The visualization component of the GMI-IPS uses Matplotlib extensively and has several functions ranging in complexity. First, it creates a model background curtain for the flight (time versus model eta levels) with the interpolated flight data superimposed on the curtain. Secondly, it creates a time-series plot of the interpolated flight data. Lastly, the visualization component creates averaged 2D model slices (longitude versus latitude) with overlaid flight track circles at key pressure levels. The GMI-IPS consists of a handful of classes and supporting functionality that have been generalized to be compatible with any ICARTT file that adheres to the base class definition. The base class represents a generic ICARTT entry, only defining a single time entry and 3D spatial positioning parameters. Other classes inherit from this base class; several classes for input ICARTT instrument files, which contain the necessary flight positioning information as a basis for data processing, as well as other classes for output ICARTT files, which contain the interpolated model data. Utility classes provide functionality for routine procedures such as: comparing field names among ICARTT files, reading ICARTT entries from a data file and storing them in data structures, and returning a reduced spatial grid based on a collection of ICARTT entries. Although the GMI-IPS is compatible with GMI model data, it can be adapted with reasonable effort for any simulation that creates Hierarchical Data Format (HDF) files. The same can be said of its adaptability to ICARTT files outside of the context of the ATom mission. The GMI-IPS contains just under 30,000 lines of code, eight classes, and a dozen drivers and utility programs. It is maintained with GIT source code management and has been used to deliver processed GMI model data for the ATom campaigns that have taken place to date.

Damon, M. R.↗

Bay Area Regional Energy: Network Integrated Commercial Retrofits (BRICR) Project. Final Report

The BRICR project applied large-scale building energy modeling concepts with the aim of reducing the cost of energy efficiency targeting, design, and project development, and measurement of energy savings for energy efficiency programs implemented by local governments that serve small and medium commercial buildings (SMB). The project leveraged the services and resources of existing local government energy programs serving disadvantaged and hard-to-reach SMB customers. In contrast to programs run by utilities, local government programs generally do not have direct access to energy billing records for an entire class of customers in a geographic area, which prior research demonstrated useful for large-scale building energy model baseline development and calibration. , However, local governments are rich in public records that offer important clues about physical attributes and uses that, along with behavior, determine energy use. Relying only on public records, BRICR demonstrated development of credible baseline energy models for 3,792 office, retail, and hotel buildings. Publicly disclosed annual energy use data from a local energy benchmarking program and anonymized data from the Building Performance Database, the nation’s largest dataset about energy-related characteristics of buildings, were utilized to validate and calibrate energy models via an innovative method comparing distributions of energy intensity by fuel type for portfolios of buildings of similar size, vintage, and use. Portfolio calibration does not provide certainty that an energy model fits an individual building; the method is useful when billing data is not accessible – a common situation for researchers, energy service providers and ESCOs, local governments, and any party other than a utility. A software component was developed, the BRICR gem, which automates simulation when relevant data is added or edited by the user to a file saved in the standardized BuildingSync XML schema for energy audit data. The component was demonstrated as a simplified means to generate a mass of energy models corresponding to public records containing basic attributes such as building scale, location, use, year built, and aspect ratio in combination with building energy code prototype data corresponding to use and vintage. The component was also demonstrated as a simplified means to automate energy simulation when attributes are revised; the intention was to enable iterative improvement of the baseline model and energy savings estimates for common energy conservation measures as users revise relevant attributes based on their observations. In the context of institutional change and uncertainty for the participating local government energy programs, 13 whole building retrofits were completed. Impacts were measured by applying the CalTRACK2.0 methods to standardize measurement of normalized metered energy consumption. The GRIDMeter methods of stratified sampling and individual load shape analysis were applied to adjust for impacts of the effect of COVID-19 on retrofitted buildings in the context of all local buildings of similar size and use. Excluding impacts of the pandemic, retrofitted buildings demonstrated between 1.6% and 25.1% reduction in energy use. The project contributed use cases and feedback that helped inform evolution of the software tools and data formats that were combined for the first time in the BRICR project.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Chapter 22 - Chlorine. In: “Handbook of Toxicology of Chemical Warfare Agents, Third Edition”, Editor: Ramesh C. Gupta.

Chlorine gas is used widely by industry and as a disinfectant and bleach, and, due to its toxicity and ease of procurement, has been used as a chemical warfare agent. Chlorine is a strong oxidizer that hydrolyzes in water to form hydrochloric and hypochlorous acid. Upon chlorine inhalation, the respiratory tract is the predominant target organ in humans and animals as chlorine is a contact irritant. Exposure causes sensory irritation and pulmonary dysfunction, and at sufficiently high concentrations results in lung lesions and injury to other internal organs including the heart. Human and animal studies have shown that chlorine toxicity is influenced more by exposure concentration than duration, is gender-independent, and increases with age, cigarette smoking, and preexisting respiratory conditions such as asthma and airway hyperreactivity. Treatment is largely supportive, although animal studies are examining the utility of various compounds for chlorine-specific treatment based on its mechanism of action.

Milanez, Sylvia↗

Breaking the curse of dimensionality to identify causal variants in Breeding 4

In the past, plant breeding has undergone three major transformations and is currently transitioning to a new technological phase, Breeding 4. This phase is characterized by the development of methods for biological design of plant varieties, including transformation and gene editing techniques directed toward causal loci. The application of such technologies will require to reliably estimate the effect of loci in plant genomes by avoiding the situation where the number of loci assayed ($p$) surpasses the number of plant genotypes (n). Here, we discuss approaches to avoid this curse of dimensionality ($n\ll p$), which will involve analyzing intermediate phenotypes such as molecular traits and component traits related to plant morphology or physiology. Because these approaches will rely on novel data types such as DNA sequences and high-throughput phenotyping images, Breeding 4 will call for analyses that are complementary to traditional quantitative genetic studies, being based on machine learning techniques which make efficient use of sequence and image data. In this article, we will present some of these techniques and their application for prioritizing causal loci and developing improved varieties in Breeding 4.

59 BASIC BIOLOGICAL SCIENCES↗

Functional uncertainty quantification for isobaric molecular dynamics simulations and defect formation energies

Functional uncertainty quantification (FunUQ) was recently proposed to quantify uncertainties in models and simulations that originate from input functions, as opposed to parameters. This paper extends here FunUQ to quantify uncertainties originating from interatomic potentials in isothermal-isobaric molecular dynamics (MD) simulations and to the calculation of defect formation energies. We derive and verify a computationally inexpensive expression to compute functional derivatives in MD based on perturbation theory. We show that this functional derivative of the quantities of interest (average internal energy, volume, and defect energies in our case) with respect to the interatomic potential can be used to predict those quantities for a different interatomic potential, without re-running the simulation. The codes and scripts to perform FunUQ in MD are freely available for download. In addition, to facilitate reproducibility and to enable use of best practices for the approach, we created Jupyter notebooks to perform FunUQ analysis on MD simulations and made them available for online simulation in nanoHUB. The tool uses cloud computing resources and users can view, edit, and run end-to-end workflows from a standard web-browser without the need to download or install any software.

36 MATERIALS SCIENCE↗

Global Ocean Surface Water Partial Pressure of CO 2 Database: Measurements Performed During 1968-2007 (Version 2007)

More than 4.1 million measurements of surface water partial pressure of CO 2 obtained over the global oceans during 1968-2007 are listed in the Lamont-Doherty Earth Observatory (LDEO) database, which includes open ocean and coastal water measurements. The data assembled include only those measured by equilibrator-CO 2 analyzer systems and have been quality-controlled based on the stability of the system performance, the reliability of calibrations for CO 2 analysis, and the internal consistency of data. To allow re-examination of the data in the future, a number of measured parameters relevant to pCO 2 measurements are listed. The overall uncertainty for the pCO 2 values listed is estimated to be ± 2.5 µatm on the average. For simplicity and for ease of reference, this version is referred to as 2007, meaning that data collected through 31 December 2007 has been included. It is our intention to update this database annually. There are 37 new cruise/ship files in this update. In addition, some editing has been performed on existing files so this should be considered a V2007 file. Also we have added a column reporting the partial pressure of CO 2 in seawater in units of Pascals. The data presented in this database include the analyses of partial pressure of CO 2 (pCO 2 ), sea surface temperature (SST), sea surface salinity (SSS), pressure of the equilibration, and barometric pressure in the outside air from the ship’s observation system. The global pCO 2 data set is available free of charge as a numeric data package (NDP) from the Carbon Dioxide Information Analysis Center (CDIAC). The NDP consists of the oceanographic data files and this printed documentation, which describes the procedures and methods used to obtain the data.

54 ENVIRONMENTAL SCIENCES↗

The Fleet Application for Scheduling and Tracking (FAST) Management Website

The FAST application was designed to replace the paper and pen method of checking out and checking in GSA Vehicles at KSC. By innovating from a paper and pen based checkout system to a fully digital one, not only the resources wasted by printing the checkout forms have been reduced, but it also reduces significantly the time that users and fleet managers need to interact with the system as well as improving the record accuracy for each vehicle. The vehicle information is pulled from a centralized database server in the SPSDL. In an attempt to add a new feature to the FAST application, the author of this report (alongside the FAST developers) has been designing and developing the FAST Management Website. The GSA fleet managers had to rely on the FAST developers in order to add new vehicles, edit vehicles and previous transactions, or for generating vehicles reports. By providing an easy-to-use FAST Management Website portal, the GSA fleet managers are now able to easily move vehicles, edit records, and print reports.

Object-Oriented Programming↗

Probabilistic Risk Assessment Procedures Guide for NASA Managers and Practitioners (Second Edition)

Probabilistic Risk Assessment (PRA) is a comprehensive, structured, and logical analysis method aimed at identifying and assessing risks in complex technological systems for the purpose of cost-effectively improving their safety and performance. NASA's objective is to better understand and effectively manage risk, and thus more effectively ensure mission and programmatic success, and to achieve and maintain high safety standards at NASA. NASA intends to use risk assessment in its programs and projects to support optimal management decision making for the improvement of safety and program performance. In addition to using quantitative/probabilistic risk assessment to improve safety and enhance the safety decision process, NASA has incorporated quantitative risk assessment into its system safety assessment process, which until now has relied primarily on a qualitative representation of risk. Also, NASA has recently adopted the Risk-Informed Decision Making (RIDM) process [1-1] as a valuable addition to supplement existing deterministic and experience-based engineering methods and tools. Over the years, NASA has been a leader in most of the technologies it has employed in its programs. One would think that PRA should be no exception. In fact, it would be natural for NASA to be a leader in PRA because, as a technology pioneer, NASA uses risk assessment and management implicitly or explicitly on a daily basis. NASA has probabilistic safety requirements (thresholds and goals) for crew transportation system missions to the International Space Station (ISS) [1-2]. NASA intends to have probabilistic requirements for any new human spaceflight transportation system acquisition. Methods to perform risk and reliability assessment in the early 1960s originated in U.S. aerospace and missile programs. Fault tree analysis (FTA) is an example. It would have been a reasonable extrapolation to expect that NASA would also become the world leader in the application of PRA. That was, however, not to happen. Early in the Apollo program, estimates of the probability for a successful roundtrip human mission to the moon yielded disappointingly low (and suspect) values and NASA became discouraged from further performing quantitative risk analyses until some two decades later when the methods were more refined, rigorous, and repeatable. Instead, NASA decided to rely primarily on the Hazard Analysis (HA) and Failure Modes and Effects Analysis (FMEA) methods for system safety assessment.

Stamatelatos,Michael↗

SU-F-R-54: CT-Texture Based Early Tumor Treatment Response Assessment During Radiation Therapy Delivery: Small Cell Versus Non-Small Cell Lung Cancers

Purpose: Tumor treatment response may potentially be assessed during radiation therapy (RT) by analyzing changes in CT-textures. We investigated the different early RT-responses between small cell (SCLC) and non-small cell lung cancer (NSCLC) as assessed by CT-texture. Methods: Daily diagnostic-quality CT acquired during routine CT-guided RT using a CT-on-Rails for 13-NSCLC and 5-SCLC patients were analyzed. These patient had ages ranging from 45–78 and 38–63 years, respectively, for NSCLC and SCLC groups, and tumor-stages ranging from T2-T4, and were treated with either RT or chemotherapy and RT with 45–66Gy/ 20–34 fractions. Gross-tumor volume (GTV) contour was generated on each daily CT by populating GTV contour from simulation to daily CTs with manual editing if necessary. CT-texture parameters, such as Hounsfield Unit (HU) histogram, mean HU, skewness, kurtosis, entropy, and short-run high-gray level emphasis (SRHGLE), were calculated in GTV from each daily CT-set using an in house software tool. Difference in changes of these texture parameters during RT between NSCLC and SCLC was analyzed and compared with GTV volume changes. Results: Radiation-induced changes in CT-texture were different between SCLC and NSCLC. Average changes from first to the last fractions for NSCLC and SCLC in GTV were 28±10(12–44) and 30±15(11–47) HU (mean HU reduction), 12.7% and 18.3% (entropy), 50% and 55% (SRHGLE), 19% and 22% (kurtosis), and 5.2% and 22% (skewness), respectively. Good correlation in kurtosis changes and GTV was seen (R{sup 2}=0.8923) for SCLC, but not for NSCLC (R{sup 2}=0.4748). SCLC had better correlations between GTV volume reduction and entropy (SCLC R{sup 2}=0.847; NSCLC R{sup 2}=0.6485), skewness (SCLC R{sup 2}=0.935; NSCLC R{sup 2}=0.7666), or SRHGLE (SCLC R{sup 2}=0.9619; NSCLC R{sup 2}=0.787). Conclusion: NSCLC and SCLC exhibited different early RT-responses as assessed by CT-texture changes during RT-delivery. The observed larger changes in various CT-texture parameters for SCLC indicate that SCLC may respond to RT more rapid than NSCLC.

60 APPLIED LIFE SCIENCES↗

Editing ERTS-1 data to exclude land aids cluster analysis of water targets

The author has identified the following significant results. It has been determined that an increase in the number of spectrally distinct coastal water types is achieved when data values over the adjacent land areas are excluded from the processing routine. This finding resulted from an automatic clustering analysis of ERTS-1 system corrected MSS scene 1002-18134 of 25 July 1972 over Monterey Bay, California. When the entire study area data set was submitted to the clustering only two distinct water classes were extracted. However, when the land area data points were removed from the data set and resubmitted to the clustering routine, four distinct groupings of water features were identified. Additionally, unlike the previous separation, the four types could be correlated to features observable in the associated ERTS-1 imagery. This exercise demonstrates that by proper selection of data submitted to the processing routine, based upon the specific application of study, additional information may be extracted from the ERTS-1 MSS data.

Erb, R. B.↗

Automatic Segmentation of Whole Breast Using Atlas Approach and Deformable Image Registration

Purpose: To compare interobserver variations in delineating the whole breast for treatment planning using two contouring methods. Methods and Materials: Autosegmented contours were generated by a deformable image registration-based breast segmentation method (DEF-SEG) by mapping the whole breast clinical target volume (CTVwb) from a template case to a new patient case. Eight breast radiation oncologists modified the autosegmented contours as necessary to achieve a clinically appropriate CTVwb and then recontoured the same case from scratch for comparison. The times to complete each approach, as well as the interobserver variations, were analyzed. The template case was also mapped to 10 breast cancer patients with a body mass index of 19.1-35.9 kg/m{sup 2}. The three-dimensional surface-to-surface distances and volume overlapping analyses were computed to quantify contour variations. Results: The median time to edit the DEF-SEG-generated CTVwb was 12.9 min (range, 3.4-35.9) compared with 18.6 min (range, 8.9-45.2) to contour the CTVwb from scratch (30% faster, p = 0.028). The mean surface-to-surface distance was noticeably reduced from 1.6 mm among the contours generated from scratch to 1.0 mm using the DEF-SEG method (p = 0.047). The deformed contours in 10 patients achieved 94% volume overlap before correction and required editing of 5% (range, 1-10%) of the contoured volume. Conclusion: Significant interobserver variations suggested a lack of consensus regarding the CTVwb, even among breast cancer specialists. Using the DEF-SEG method produced more consistent results and required less time. The DEF-SEG method can be successfully applied to patients with different body mass indexes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

GRASP/Ada 95: Reverse Engineering Tools for Ada

The GRASP/Ada project (Graphical Representations of Algorithms, Structures, and Processes for Ada) has successfully created and prototyped an algorithmic level graphical representation for Ada software, the Control Structure Diagram (CSD), and a new visualization for a fine-grained complexity metric called the Complexity Profile Graph (CPG). By synchronizing the CSD and the CPG, the CSD view of control structure, nesting, and source code is directly linked to the corresponding visualization of statement level complexity in the CPG. GRASP has been integrated with GNAT, the GNU Ada 95 Translator to provide a comprehensive graphical user interface and development environment for Ada 95. The user may view, edit, print, and compile source code as a CSD with no discernible addition to storage or computational overhead. The primary impetus for creation of the CSD was to improve the comprehension efficiency of Ada software and, as a result, improve reliability and reduce costs. The emphasis has been on the automatic generation of the CSD from Ada 95 source code to support reverse engineering and maintenance. The CSD has the potential to replace traditional prettyprinted Ada source code. The current update has focused on the design and implementation of a new Motif compliant user interface, and a new CSD generator consisting of a tagger and renderer. The Complexity Profile Graph (CPG) is based on a set of functions that describes the context, content, and the scaling for complexity on a statement by statement basis. When combined graphicafly, the result is a composite profile of complexity for the program unit. Ongoing research includes the development and refinement of the associated functions, and the development of the CPG generator prototype. The current Version 5.0 prototype provides the capability for the user to generate CSDs and CPGs from Ada 95 source code in a reverse engineering as well as forward engineering mode with a level of flexibility suitable for practical application. This report provides an overview of the GRASP/Ada project with an emphasis on the current update.

Cross, James H., II↗

The Conference Proceedings of the 1998 Air Transport Research Group (ATRG) of the WCTR Society

The Air Transport Research Group of the WCTR Society was formally launched as a special interest group at the 7h Triennial WCTR in Sydney, Australia in 1995. Since then, our membership base has expanded rapidly, and now includes over 400 active transportation researchers, policy-makers, industry executives, major corporations and research institutes from 28 countries. It became a tradition that the ATRG would hold an international conference at least once a year. In 1998, the ATRG organized a consecutive stream of 14 aviation sessions at the 8th Triennial WCTR Conference (July 12-17: Antwerp). Again, on 19-21 July, 1998, the ATRG Symposium was organized and executed every successfully by Dr. Aisling Reynolds-Feighan of the University College of Dublin. The Aviation Institute at the University of Nebraska at Omaha has published the Proceedings of the 1998 ATRG Dublin Symposium (being co-edited by Dr. Aisling Reynolds-Feighan and Professor Brent Bowen), and the Proceedings of the 1998 WCTR- ATRG Conference (being co-edited by Professors Tae H. Oum and Brent Bowen).

Bowen, Brent D.↗

The Symposium Proceedings of the 1998 Air Transport Research Group (ATRG)

The Air Transport Research Group of the World Conference on Transportation Research (WCTR) Society was formally launched as a special interest group at the 7th Triennial WCTR in Sydney, Australia in 1995. Since then, our membership base has expanded rapidly, and now includes over 400 active transportation researchers, policy-makers, industry executives, major corporations and research institutes from 28 countries. It became a tradition that the ATRG would hold an international conference at least once a year. In 1998, the ATRG organized a consecutive stream of 14 aviation sessions at the 8th Triennial WCTR Conference (July 12-17: Antwerp). Again, on 19-21 July, 1998, the ATRG Symposium was organized and executed very successfully by Dr. Aisling Reynolds-Feighan of the University College of Dublin. The Aviation Institute at the University of Nebraska at Omaha has published the Proceedings of the 1998 ATRG Dublin Symposium (being co-edited by Dr. Aisling Reynolds-Feighan and Professor Brent Bowen), and the Proceedings of the 1998 WCTR-ATRG Conference (being co-edited by Professors Tae H. Oum and Brent Bowen).

Reynolds-Feighan, Aisling↗

Control of New Kinetic Barriers & Design of Nanorods

The accomplishments of this project include three elements. The first element directly relates to the focus of this project. Specifically, we have determined the three-dimensional Ehrlich-Schwoebel barriers, with and without surfactants, and two manuscripts in preparation; references refer to the list of journal publications. Further, we have discovered a characteristic length scale - the dimension of atomic islands bounded by multiple-layer surface steps. This discovery has made it possible to understand scientifically why nanorods synthesis is possible at all, will enable science-based design of nanorods, and may impact energy technology through nanomaterials design and synthesis. The second element relates to an exploration - synthesis of nanowires. This exploration is made possible through additional support of a Small Grant Exploratory Research from NSF. Through a combination of atomistic simulations, theories, and experiments, the PI and colleagues have made two contributions to the field. Specifically, they have revealed the physical reason why periodic twins develop during growth of SiC nanowires. Further, they have discovered that SiC nanowire films have an order-of-magnitude higher friction that their macroscopic counterpart, something that has never been reported before. The third elements relates to knowledge dissemination. The PI has co-edited (with Helena van Swygenhoven of PSI) an issue of MRS Bulletin, with the theme of Atomistic Simulations of Mechanics of Nanostructures, co-authored a review article in JOM, and authored a review paper in connection with a Banff workshop series co-sponsored by Canada, US, and Mexico.

36 MATERIALS SCIENCE↗

Utility-Scale Solar, 2024 Edition: Empirical Trends in Deployment, Technology, Cost, Performance, PPA Pricing, and Value in the United States [Slides]

Berkeley Lab’s “Utility-Scale Solar, 2024 Edition” presents analysis of empirical plant-level data from the U.S. fleet of ground-mounted photovoltaic (PV), PV+battery, and concentrating solar-thermal power (CSP) plants with capacities exceeding 5 MWAC (PV plants of 5 MWAC or less, including residential rooftop systems, are covered separately in Berkeley Lab’s companion annual report, Tracking the Sun). Key findings from this year’s report include: -18.5 GWAC of new utility-scale PV capacity came online in 2023, bringing cumulative installed capacity to more than 80.2 GWAC across 47 states. Installed costs continued to fall in 2023. Relative to 2022, capacity-weighted averages decreased by 8% to -$\$1.43$/WAC (or $\$1.08$/WDC). Costs, based on a 7.1 GWAC sample of 76 plants completed in 2023, have fallen by 75% (averaging 10% annually) since 2010. Plant-level capacity factors vary widely, from 6% to 36% (on an AC basis), with a sample median of 24%. -Levelized cost of energy (LCOE) of new 2023 projects increased slightly to $\$46$/MWh prior to the application of tax credits but continued to fall to $\$31$/MWh when accounting for federal incentives. PPA prices have largely followed the decline in solar’s LCOE over time, but newly signed longer-term PPA prices have increased since 2021, to an average of $\$35$/MWh (levelized, in 2023 dollars). -Solar’s average energy and capacity value (i.e., ability to offset costs of other power generation sources) across the U.S. was $\$45$/MWh in 2023. Solar’s average market value was lowest in CAISO ($\$27$/MWh), the market with the greatest solar generation share, and highest in ERCOT ($\$67$/MWh). -Newer solar projects had greater market value in 2023 than their generation costs, yielding $\$1.1$ billion in benefits. Projects built in 2022 delivered on average $\$15$/MWh more market value than their costs in 2023. -Solar’s combined value from wholesale electricity markets, public health and climate damage reduction were greater than generation costs and incentives, yielding $\$13.7$ billion in net benefits in 2023. We estimate U.S. health benefits of $\$24$/MWh and reduced global climate damages of $\$101$/MWh. -Adding battery storage is one way to increase the value of solar. Deployment of 52 new PV+battery hybrid plants set a record with 5.3 GW installed in 2023. Our public data file tracks metadata and PPA prices from more than 100 PV+battery hybrid projects that are already online or that have secured offtake arrangements. -Looking ahead, a massive pipeline of at least 1,085 GW of solar capacity dominates the nation’s interconnection queues at the end of 2023. Nearly 571 GW, or 53%, of that total was paired with a battery – in CAISO it was a staggering 98%. Historically only 10% of the requested solar capacity is built. -For more information, and to explore related interactive data visualizations, go to utilityscalesolar.lbl.gov.

14 SOLAR ENERGY↗

Tethers in Space Handbook

A new edition of the Tethers in Space Handbook was needed after the last edition published in 1989. Tether-related activities have been quite busy in the 90's. We have had the flights of TSSI and TSSI-R, SEDS-1 and -2, PMG, TIPS and OEDIPUS. In less than three years there have been one international Conference on Tethers in Space, held in Washington DC, and three workshops, held at ESA/Estec in the Netherlands, at ISAS in Japan and at the University of Michigan, Ann Harbor. The community has grown and we finally have real flight data to compare our models with. The life of spaceborne tethers has not been always easy and we got our dose of setbacks, but we feel pretty optimistic for the future. We are just stepping out of the pioneering stage to start to use tethers for space science and technological applications. As we are writing this handbook TiPs, a NRL tether project is flying above our heads. There is no emphasis in affirming that as of today spacebome tethers are a reality and their potential is far from being fully appreciated. Consequently, a large amount of new information had to be incorporated into this new edition. The general structure of the handbook has been left mostly unchanged. The past editors have set a style which we have not felt needed change. The section on the flights has been enriched with information on the scientific results. The categories of the applications have not been modified, and in some cases we have mentioned the existence of related flight data. We felt that the section contributed by Joe Carroll, called Tether Data, should be maintained as it was, being a "classic" and still very accurate and not at all obsolete. We have introduced a new chapter entitled Space Science and Tethers since flight experience has shown that tethers can complement other space-based investigations. The bibliography has been updated. Due to the great production in the last few years %e had to restrict our search to works published in refereed journal. The production, however, is much more extensive. In addition, we have included the summary of the papers presented at the last International Conference which was a forum for first-hand information on all the flights.

Cosmo, M. L.↗

Probabilistic Assessment of Tunguska-Scale Asteroid Impacts

The Tunguska meteor airburst that felled trees across >2000 sq km of Siberian forest in 1908 has been extensively studied and modeled in attempts to deduce its size, properties, and impact characteristics. However, most of the existing modeling and simulation studies have investigated a small subset of cases based on assumptions of representative densities, velocities, or other properties. In this study, we use the Probabilistic Asteroid Impact Risk (PAIR) model to assess 50 million Tunguska-scale asteroid impacts, covering a full range of potential impactor properties. The impact cases are sampled from probabilistic distributions representing our current knowledge of asteroid properties, entry trajectories, and size frequencies, and the entry, airburst, and resulting ground damage are modeled for each case. The results provide a broader characterization of the range and relative likelihood of asteroid properties that could yield Tunguska-scale impacts. The full results of this study and a companion study on impact frequencies are pending publication in an upcoming Tunguska special edition of Icarus [1,2].

Wheeler, Lorien↗